• Stefan Richter's avatar
    firedtv: cleanups and minor fixes · 8ae83cdf
    Stefan Richter authored
    Combination of the following changes:
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: increase FCP frame length for DVB-S2 tune QSPK
    
        The last three bytes didn't go out to the wire.
        Effect of the fix not yet tested.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: replace mdelay by msleep
    
        These functions can sleep (and in fact sleep for the duration of a whole
        FCP transaction).  Hence msleep is more appropriate here.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: trivial reorganization in avc_api
    
        Reduce nesting level by factoring code out of avc_tuner_dsd() into
        helper functions.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: trivial cleanups in avc_api
    
        Use dev_err(), no CamelCase function names, adjust comment style, put
        #if 0 around unused code and add FIXME comments, standardize on
        lower-case hexadecimal constants, use ALIGN() for some frame length
        calculations, make a local function static...
    
        The code which writes FCP command frames and reads FCP response frames
        is not yet brought into canonical kernel coding style because this
        involves changes of typedefs (on-the-wire bitfields).
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: don't retry oPCR updates endlessly
    
        In the theoretical case that the target node wasn't handling the lock
        transactions as expected or there was continued interference by other
        initiating nodes, these functions wouldn't return for ages.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: remove bitfield typedefs from cmp, fix for big endian CPUs
    
        Use macros/ inline functions/ standard byte order accessors to read and
        write oPCR register values (big endian bitfields, on-the-wire data).
        The new code may not be the ultimate optimum, but it doesn't occur in a
        hot path.
    
        This fixes the CMP code for big endian CPUs.  So far I tested it only on
        a little endian CPU though.
    
        For now, include <asm/byteorder.h> instead of <linux/byteorder.h>
        because drivers/ieee1394/*.h also include the former.  I will fix this
        in drivers/ieee1394 and firedtv later.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: trivial cleanups in cmp
    
        Reduce nesting level by means of early exit and goto.
        Remove obsolete includes, use dev_err(), no CamelCase function names...
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: trivial cleanups in firesat-ci
    
        Whitespace, variable names, comment style...
    
        Also, use dvb_generic_open() and dvb_generic_release() directly as
        our hooks in struct file_operations because firedtv's wrappers merely
        called these generic functions.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: remove CA debug code
    
        This looks like it is not necessary to have available for endusers who
        cannot patch kernels for bug reporting and tests of fixes.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: remove AV/C debug code
    
        This looks like it is not necessary to have available for endusers who
        cannot patch kernels for bug reporting and tests of fixes.
    
    Sun, 2 Nov 2008 13:45:00 +0100 (CET)
    firedtv: remove various debug code
    
        Most of this was already commented out.  And that which wasn't is not
        relevant in normal use.
    
    Mon, 29 Sep 2008 19:22:48 +0200 (CEST)
    firedtv: register input device as child of a FireWire device
    
        Instead of one virtual input device which exists for the whole lifetime
        of the driver and receives events from all connected FireDTVs, register
        one input device for each firedtv device.  These input devices will show
        up as children of the respective firedtv devices in the sysfs hierarchy.
    
        However, the implementation falls short because of a bug in userspace:
        Udev's path_id script gets stuck with 100% CPU utilization, maybe
        because of an assumption about the maximum ieee1394 device hierarchy
        depth.
    
        To avoid this bug, we use the fw-host device instead of the proper
        unit_directory device as parent of the input device.
    
        There is hope that the port to the new firewire stack won't be inhibited
        by this userspace bug because there are no fw-host devices there.
    
    Mon, 29 Sep 2008 19:21:52 +0200 (CEST)
    firedtv: fix string comparison and a few sparse warnings
    
        Sparse found a bug:
        	while ((kv_buf + kv_len - 1) == '\0')
        should have been
        	while (kv_buf[kv_len - 1] == '\0')
        We fix it by a better implementation without a temporary copy.
    
        Also fix sparse warnings of 0 instead of NULL and signedness mismatches.
    
    Mon, 29 Sep 2008 19:21:20 +0200 (CEST)
    firedtv: remove unused struct members
    
        and redefine an int as a bool.
    
    Mon, 29 Sep 2008 19:20:36 +0200 (CEST)
    firedtv: fix initialization of dvb_frontend.ops
    
        There was a NULL pointer reference if no dvb_frontend_info was found.
    
        Also, don't directly assign struct typed values to struct typed
        variables.  Instead write out assignments to individual strcut members.
        This reduces module size by about 1 kB.
    
    Mon, 29 Sep 2008 19:19:41 +0200 (CEST)
    firedtv: remove unused dual subunit code from initialization
    
        No FireDTVs with more than one subunit exists, hence simplify the
        initialization for the special case of one subunit.  The driver was able
        to check for more than one subunit but was broken for more than two
        subunits.
    
        While we are at it, add several missing cleanups after failure, and
        include a few dynamically allocated structures diretly into struct
        firesat instead of allocating them separately.
    
    Mon, 29 Sep 2008 19:19:08 +0200 (CEST)
    firedtv: add vendor_id and version to driver match table
    
        Now that nodemgr was enhanced to match against the root directory's
        vendor ID if there isn't one in the unit directory, use this to
        prevent firedtv to be bound to wrong devices by accident.
    
        Also add the AV/C software version ID to the match flags for
        completeness; specifier ID and software only make sense as a pair.
    
    Mon, 29 Sep 2008 19:18:30 +0200 (CEST)
    firedtv: use hpsb_node_read(), _write(), _lock()
    
        because they are simpler and treat the node generation more correctly.
        While we are at it, clean up and simplify surrounding code.
    Signed-off-by: default avatarStefan Richter <stefanr@s5r6.in-berlin.de>
    8ae83cdf
firesat.h 5.38 KB