• Sivakumar Subramani's avatar
    S2io: Enable all the error and alarm indications · 9caab458
    Sivakumar Subramani authored
    - Added support to unmask entire set of device errors and alarams.
            Alarm interrupts are generated for a myriad of purposes, ranging from
      illegal operations or requests to internal state machine errors and
      uncorrectable data corruption errors. In several cases the adapter can
      recover gracefully from unexpected events; however, in some cases, a device
      reset may be necessary. This patch handles alarms generated by all the
      blocks within the device.
    
      The adapter generates the following types of alarms:
            1. Link state transitions (local/remote fault) or other link-related
               problems.
            2. Problems with any device peripherals, including the EEPROM, FLASH,
               etc.
            3. Correctable ECC errors (single-bit errors) on internal data
               structures or frame data.
            4. Uncorrectable ECC errors (multi-bit errors) on internal data
               structures or frame data.
            5. State machine errors, which indicate that internal control
               structures have become corrupted.
            6. PCI related errors, including parity errors or illegal transactions.
            7. Other unexpected events.
    
    - Implemented Jeff's review comments to use do_s2io_write_bits function to avoid
      duplicate codes.
    Signed-off-by: default avatarSivakumar Subramani <sivakumar.subramani@neterion.com>
    Signed-off-by: default avatarSantosh Rastapur <santosh.rastapur@neterion.com>
    Signed-off-by: default avatarRamkrishna Vepa <ram.vepa@neterion.com>
    Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
    9caab458
s2io-regs.h 31.3 KB