• Mika Westerberg's avatar
    PCI: Put PCIe ports into D3 during suspend · 9d26d3a8
    Mika Westerberg authored
    Currently the Linux PCI core does not touch power state of PCI bridges and
    PCIe ports when system suspend is entered.  Leaving them in D0 consumes
    power unnecessarily and may prevent the CPU from entering deeper C-states.
    
    With recent PCIe hardware we can power down the ports to save power given
    that we take into account few restrictions:
    
      - The PCIe port hardware is recent enough, starting from 2015.
    
      - Devices connected to PCIe ports are effectively in D3cold once the port
        is transitioned to D3 (the config space is not accessible anymore and
        the link may be powered down).
    
      - Devices behind the PCIe port need to be allowed to transition to D3cold
        and back.  There is a way both drivers and userspace can forbid this.
    
      - If the device behind the PCIe port is capable of waking the system it
        needs to be able to do so from D3cold.
    
    This patch adds a new flag to struct pci_device called 'bridge_d3'.  This
    flag is set and cleared by the PCI core whenever there is a change in power
    management state of any of the devices behind the PCIe port.  When system
    later on is suspended we only need to check this flag and if it is true
    transition the port to D3 otherwise we leave it in D0.
    
    Also provide override mechanism via command line parameter
    "pcie_port_pm=[off|force]" that can be used to disable or enable the
    feature regardless of the BIOS manufacturing date.
    Tested-by: default avatarLukas Wunner <lukas@wunner.de>
    Signed-off-by: default avatarMika Westerberg <mika.westerberg@linux.intel.com>
    Signed-off-by: default avatarBjorn Helgaas <bhelgaas@google.com>
    Acked-by: default avatarRafael J. Wysocki <rafael.j.wysocki@intel.com>
    9d26d3a8
pci.c 134 KB