The CPSW ALE supports feature to rate limit number ingress
broadcast(BC)/multicast(MC) packets per/sec which main purpose is BC/MC
storm prevention.

The ALE BC/MC packet rate limit configuration consist of two parts:
- global
  ALE_CONTROL.ENABLE_RATE_LIMIT bit 0 which enables rate limiting globally
  ALE_PRESCALE.PRESCALE specifies rate limiting interval
- per-port
  ALE_PORTCTLx.BCASTMCAST/_LIMIT specifies number of BC/MC packets allowed
  per rate limiting interval.
  When port.BCASTMCAST/_LIMIT is 0 rate limiting is disabled for Port.

When BC/MC packet rate limiting is enabled the number of allowed packets
per/sec is defined as:
  number_of_packets/sec = (Fclk / ALE_PRESCALE) * port.BCASTMCAST/_LIMIT

Hence, the ALE_PRESCALE configuration is common for all ports the 1ms
interval is selected and configured during ALE initialization while
port.BCAST/MCAST_LIMIT are configured per-port.
This allows to achieve:
 - min number_of_packets = 1000 when port.BCAST/MCAST_LIMIT = 1
 - max number_of_packets = 1000 * 255 = 255000
   when port.BCAST/MCAST_LIMIT = 0xFF

The ALE_CONTROL.ENABLE_RATE_LIMIT can also be enabled once during ALE
initialization as rate limiting enabled by non zero port.BCASTMCAST/_LIMIT
values.

This patch implements above logic in ALE and adds new ALE APIs
 cpsw_ale_rx_ratelimit_bc();
 cpsw_ale_rx_ratelimit_mc();
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>