From: Joe Korty <joe.korty@ccur.com>

Fix occasional PCI bus parity errors on the Dell PowerEdge 4600 during
boot.

Symptoms: The LCD display would turn orange and display "PCI SYSTEM E13F5",
and the following message would appear in /var/log/dmesg: "Uhhuh.  NMI
received.  Dazed and confused, but trying to continue".

By inserting a PCI card with a PDC20268 IDE controller and attaching to
that a Sony DRU-510A DVD RW burner with an unloaded tray, the failure can
be made to happen on every boot.

Cause: The aic7xxx driver was resetting the onboard AIC7891 SCSI controller
while waiting for a previous reset to complete.  This second reset confuses
the controller causing it to put bad data onto the PCI bus.

This is a backport of a RedHat 2.4.21-15.ELsmp fix.  A letter discussing
this problem, or one very close to it, may be found at:

   http://lists.us.dell.com/pipermail/linux-poweredge/2003-May/025010.htmlSigned-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>