• Jon Hunter's avatar
    ARM: OMAP4470: Fix OMAP4470 boot failure · e90b833e
    Jon Hunter authored
    OMAP4470 currently fails to boot, printing various messages such as ...
    
    omap_hwmod: mpu: cannot clk_get main_clk dpll_mpu_m2_ck
    omap_hwmod: mpu: cannot _init_clocks
    ------------[ cut here ]------------
    WARNING: at arch/arm/mach-omap2/omap_hwmod.c:2062 _init+0x2a0/0x2e4()
    omap_hwmod: mpu: couldn't init clocks
    Modules linked in:
    [<c001c7fc>] (unwind_backtrace+0x0/0xf4) from [<c0043c64>] (warn_slowpath_common+0x4c/0x64)
    [<c0043c64>] (warn_slowpath_common+0x4c/0x64) from [<c0043d10>] (warn_slowpath_fmt+0x30/0x40)
    [<c0043d10>] (warn_slowpath_fmt+0x30/0x40) from [<c0674208>] (_init+0x2a0/0x2e4)
    [<c0674208>] (_init+0x2a0/0x2e4) from [<c067428c>] (omap_hwmod_setup_one+0x40/0x60)
    [<c067428c>] (omap_hwmod_setup_one+0x40/0x60) from [<c0674280>] (omap_hwmod_setup_one+0x34/0x60)
    [<c0674280>] (omap_hwmod_setup_one+0x34/0x60) from [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250)
    [<c06726f4>] (omap_dm_timer_init_one+0x30/0x250) from [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108)
    [<c0672930>] (omap2_gp_clockevent_init+0x1c/0x108) from [<c0672c60>] (omap4_timer_init+0x10/0x5c)
    [<c0672c60>] (omap4_timer_init+0x10/0x5c) from [<c066c418>] (time_init+0x20/0x30)
    [<c066c418>] (time_init+0x20/0x30) from [<c0668814>] (start_kernel+0x1b0/0x304)
    [<c0668814>] (start_kernel+0x1b0/0x304) from [<80008044>] (0x80008044)
    ---[ end trace 1b75b31a2719ed1c ]---
    
    The problem is that currently none of the clocks are being registered for
    OMAP4470 devices and so on boot-up no clocks can be found and the kernel panics.
    
    This fix allows the kernel to boot without failure using a simple RAMDISK file
    system on OMAP4470 blaze board.
    
    Per feedback from Paul and Benoit the 4470 clock data is incomplete for new
    modules such as the 2D graphics block that has been added to the 4470.
    Therefore add a warning to indicate that the clock data is incomplete.
    
    Cc: Paul Walmsley <paul@pwsan.com>
    Cc: Benoit Cousson <b-cousson@ti.com>
    Signed-off-by: default avatarJon Hunter <jon-hunter@ti.com>
    [tony@atomide.com: updated comments]
    Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
    e90b833e
clock44xx_data.c 105 KB