• Michael Chan's avatar
    [TG3]: Exit irq handler during chip reset. · d18edcb2
    Michael Chan authored
    On most tg3 chips, the memory enable bit in the PCI command register
    gets cleared during chip reset and must be restored before accessing
    PCI registers using memory cycles.  The chip does not generate
    interrupt during chip reset, but the irq handler can still be called
    because of irq sharing or irqpoll.  Reading a register in the irq
    handler can cause a master abort in this scenario and may result in a
    crash on some architectures.
    
    Use the TG3_FLAG_CHIP_RESETTING flag to tell the irq handler to exit
    without touching any registers.  The checking of the flag is in the
    "slow" path of the irq handler and will not affect normal performance.
    The msi handler is not shared and therefore does not require checking
    the flag.
    
    Thanks to Bernhard Walle <bwalle@suse.de> for reporting the problem.
    Signed-off-by: default avatarMichael Chan <mchan@broadcom.com>
    Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
    d18edcb2
tg3.h 86.9 KB