• Alex Deucher's avatar
    drm/radeon/kms: Add support for interrupts on r6xx/r7xx chips (v3) · d8f60cfc
    Alex Deucher authored
    This enables the use of interrupts on r6xx/r7xx hardware.
    Interrupts are implemented via a ring buffer.  The GPU adds
    interrupts vectors to the ring and the host reads them off
    in the interrupt handler.  The interrupt controller requires
    firmware like the CP.  This firmware must be installed and
    accessble to the firmware loader for interrupts to function.
    
    MSIs don't seem to work on my RS780.  They work fine on all
    my discrete cards.  I'm not sure about other RS780s or
    RS880s.  I've disabled MSIs on RS780 and RS880, but it would
    probably be worth checking on some other systems.
    
    v2 - fix some checkpatch.pl problems;
         re-read the disp int status reg if we restart the ih;
    
    v3 - remove the irq handler if r600_irq_init() fails;
         remove spinlock in r600_ih_ring_fini();
         move ih rb overflow check to r600_get_ih_wptr();
         move irq ack to separate function;
    Signed-off-by: default avatarAlex Deucher <alexdeucher@gmail.com>
    Signed-off-by: default avatarDave Airlie <airlied@redhat.com>
    d8f60cfc
radeon_irq_kms.c 3.28 KB