veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.

Using iproute2 with user-space-level checking removed:

Before:

  # ./ip link add index 10 type veth peer index -1
  # ip link show
  1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
  2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
    link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
  10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
  -1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
    link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff

Now:

  $ ./ip link add index 10 type veth peer index -1
  Error: ifindex can't be negative.

This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.

Fixes: e6f8f1a7 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a3 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>