Pull thermal control updates from Rafael Wysocki:
 "As far as new functionality is concerned, there is a new thermal
  driver for the Intel Hardware Feedback Interface (HFI) along with some
  intel-speed-select utility changes to support it. There are also new
  DT compatible strings for a couple of platforms, and thermal zones on
  some platforms will be registered as HWmon sensors now.

  Apart from the above, some drivers are updated (fixes mostly) and
  there is a new piece of documentation for the Intel DPTF (Dynamic
  Power and Thermal Framework) sysfs interface.

  Specifics:

   - Add a new thermal driver for the Intel Hardware Feedback Interface
     (HFI) including the HFI initialization, HFI notification interrupt
     handling and sending CPU capabilities change messages to user space
     via the thermal netlink interface (Ricardo Neri, Srinivas
     Pandruvada, Nathan Chancellor, Randy Dunlap).

   - Extend the intel-speed-select utility to handle out-of-band CPU
     configuration changes and add support for the CPU capabilities
     change messages sent over the thermal netlink interface by the new
     HFI thermal driver to it (Srinivas Pandruvada).

   - Convert the DT bindings to yaml format for the Exynos platform and
     fix and update the MAINTAINERS file for this driver (Krzysztof
     Kozlowski).

   - Register the thermal zones as HWmon sensors for the QCom's Tsens
     driver and TI thermal platforms (Dmitry Baryshkov, Romain Naour).

   - Add the msm8953 compatible documentation in the bindings (Luca
     Weiss).

   - Add the sm8150 platform support to the QCom LMh driver's DT binding
     (Thara Gopinath).

   - Check the command result from the IPC command to the BPMP in the
     Tegra driver (Mikko Perttunen).

   - Silence the error for normal configuration where the interrupt is
     optionnal in the Broadcom thermal driver (Florian Fainelli).

   - Remove remaining dead code from the TI thermal driver (Yue
     Haibing).

   - Don't use bitmap_weight() in end_power_clamp() in the powerclamp
     driver (Yury Norov).

   - Update the OS policy capabilities handshake in the int340x thermal
     driver (Srinivas Pandruvada).

   - Increase the policies bitmap size in int340x (Srinivas Pandruvada).

   - Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
     int340x thermal driver (Rafael Wysocki).

   - Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).

   - Add Intel Dynamic Power and Thermal Framework (DPTF) kernel
     interface documentation (Srinivas Pandruvada).

   - Fix bullet list warning in the thermal documentation (Randy
     Dunlap)"

* tag 'thermal-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits)
  thermal: int340x: Update OS policy capability handshake
  thermal: int340x: Increase bitmap size
  Documentation: thermal: DPTF Documentation
  MAINTAINERS: thermal: samsung: update Krzysztof Kozlowski's email
  thermal/drivers/ti-soc-thermal: Remove unused function ti_thermal_get_temp()
  thermal/drivers/brcmstb_thermal: Interrupt is optional
  thermal: tegra-bpmp: Handle errors in BPMP response
  drivers/thermal/ti-soc-thermal: Add hwmon support
  dt-bindings: thermal: tsens: Add msm8953 compatible
  dt-bindings: thermal: Add sm8150 compatible string for LMh
  thermal/drivers/qcom/lmh: Add support for sm8150
  thermal/drivers/tsens: register thermal zones as hwmon sensors
  MAINTAINERS: thermal: samsung: Drop obsolete properties
  dt-bindings: thermal: samsung: Convert to dtschema
  tools/power/x86/intel-speed-select: v1.12 release
  tools/power/x86/intel-speed-select: HFI support
  tools/power/x86/intel-speed-select: OOB daemon mode
  thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
  thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
  thermal: Replace acpi_bus_get_device()
  ...