• Jarkko Nikula's avatar
    ASoC: max98090: Add recovery for PLL lock failure · b8a3ee82
    Jarkko Nikula authored
    All MAX98090 input clocks MCLK, LRCLK and BCLK must be running and stable
    before powering on the codec in slave mode. Otherwise the PLL may not lock
    to LRCLK causing silence in playback and capture. How often that happens is
    somewhat hardware and clock configuration specific.
    
    Now if wanting to follow strictly this clocks must be active before
    powering the codec on requirement we should have a notification from DAI
    driver to codec driver when clocks are activated and take codec out of
    shutdown only after that. Plus take care of possible active bypass paths.
    
    However, when PLL unlock occurs, MAX98090 asserts the PLL Unlock Flag which
    can be configured as an IRQ source. This allows to workaround around the
    issue by toggling the codec power shortly in case of PLL lock failure.
    
    In order to prevent needlessly toggling codec power in case of short PLL
    unlocks at the beginning of stream this patch implements delayed activation
    for PLL unlock interrupt. Then workaround is run only when the PLL doesn't
    lock at all.
    
    Power toggling workaround for PLL unlock comes originally from
    Liam Girdwood <liam.r.girdwood@linux.intel.com> and delayed activation from
    me.
    Signed-off-by: default avatarJarkko Nikula <jarkko.nikula@linux.intel.com>
    Signed-off-by: default avatarMark Brown <broonie@kernel.org>
    b8a3ee82
max98090.h 45.1 KB