Commit 00465f4c authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

Merge tag 'extcon-next-for-4.2' of...

Merge tag 'extcon-next-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v4.2

This patchset include the huge update of extcon core and add the new one extcon
driver and fix minor isseu of extcon drivers.

Detailed description for patchset:
1. Update the extcon core.
- Modify the extcon device name on sysfs from device name name to 'extcon[X]'
as following because if same extcon device are included in H/W development board,
the one of the two device driver might be failed on the probe().
: /sys/class/extcon/[device name] -> /sys/class/extcon/extcon[X]

- Use the unique id for external connectors instead of legacy string name.
Previously, extcon used the string name to identify the type of external
connectors. This way have the many potential issues. So, extcon core define the
unique id for each external connectors as following:

	enum extcon {
		EXTCON_NONE             = 0x0,

		/* USB external connector */
		EXTCON_USB              = 0x1,
		EXTCON_USB_HOST		= 0x2,

		/* Charger external connector */
		EXTCON_TA		= 0x10,
		EXTCON_FAST_CHARGER	= 0x11,
		EXTCON_SLOW_CHARGER	= 0x12,
		EXTCON_CHARGE_DOWNSTREAM = 0x13,

		/* Audio and video external connector */
		EXTCON_LINE_IN		= 0x20,
		EXTCON_LINE_OUT		= 0x21,
		EXTCON_MICROPHONE	= 0x22,
		EXTCON_HEADPHONE	= 0x23,
		...
	};

- Update tye prototype of extcon_register_notifier() by using the unique id
(enum extcon) of external connectors.

- Add extcon_get_edev_name() API to get the name of extcon device on extcon
client driver because the name is included in 'struct extcon_dev' and 'struct
extcon_dev' should be handled in only drivers/extcon directory. So. if extcon
client need the name of extcon device, they could use this function.

- Unify the jig/dock and MHL-TA cable name on extcon driver.
: JIG-{USB-ON|USB-OFF|UART-ON|UART-OFF} -> JIG
: Dock-{Smart|Desk|Audio|Card} -> DOCK
: MHL-TA -> TA

- Use the capital letter for the name of all external connectors.
- Remove the optional print_name() function pointer from struct extcon_dev to
maintain the consistent name of extcon device.

2. Add the new extcon-axp288.c extcon driver.
- The extcon-axp288.c driver support for AXP288 PMIC which has the BC1.2
charger detection capability. So this extcon driver can detect the
EXTCON_SLOW_CHARGER, EXTCON_CHARGE_DOWNSTREAM and EXTCON_FAST_CHARGER.

3. Update the extcon-arizona.c driver.
- Add support for selective detection mode when headphone detection.
- Apply HP clamps for WM8280

4. Clean-up the extcon core and drivers.
- Add manufactor information of each extcon device.
- Fix checkpatch warning and minor coding style on extcon.c.c
- Fix build break if GPIOLIB is not enabled on extcon-usb-gpiio.c.
- Set the direction of gpio when calling devm_gpiod_get() on extcon-usb-gpio.c
parents 1f656ff3 f8df8808
......@@ -62,6 +62,12 @@ Optional properties:
present, the number of values should be less than or equal to the
number of inputs, unspecified inputs will use the chip default.
- wlf,hpdet-channel : Headphone detection channel.
ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
If this node is not mentioned or if the value is unknown, then
headphone detection mode is set to HPDETL.
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
they are being externally supplied. As covered in
Documentation/devicetree/bindings/regulator/regulator.txt
......
......@@ -28,15 +28,22 @@ config EXTCON_ARIZONA
with Wolfson Arizona devices. These are audio CODECs with
advanced audio accessory detection support.
config EXTCON_AXP288
tristate "X-Power AXP288 EXTCON support"
depends on MFD_AXP20X && USB_PHY
help
Say Y here to enable support for USB peripheral detection
and USB MUX switching by X-Power AXP288 PMIC.
config EXTCON_GPIO
tristate "GPIO extcon support"
depends on GPIOLIB
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to enable GPIO based extcon support. Note that GPIO
extcon supports single state per extcon instance.
config EXTCON_MAX14577
tristate "MAX14577/77836 EXTCON Support"
tristate "Maxim MAX14577/77836 EXTCON Support"
depends on MFD_MAX14577
select IRQ_DOMAIN
select REGMAP_I2C
......@@ -46,7 +53,7 @@ config EXTCON_MAX14577
detector and switch.
config EXTCON_MAX77693
tristate "MAX77693 EXTCON Support"
tristate "Maxim MAX77693 EXTCON Support"
depends on MFD_MAX77693 && INPUT
select IRQ_DOMAIN
select REGMAP_I2C
......@@ -56,7 +63,7 @@ config EXTCON_MAX77693
detector and switch.
config EXTCON_MAX77843
tristate "MAX77843 EXTCON Support"
tristate "Maxim MAX77843 EXTCON Support"
depends on MFD_MAX77843
select IRQ_DOMAIN
select REGMAP_I2C
......@@ -66,7 +73,7 @@ config EXTCON_MAX77843
detector add switch.
config EXTCON_MAX8997
tristate "MAX8997 EXTCON Support"
tristate "Maxim MAX8997 EXTCON Support"
depends on MFD_MAX8997 && IRQ_DOMAIN
help
If you say yes here you get support for the MUIC device of
......@@ -81,7 +88,7 @@ config EXTCON_PALMAS
detection by palmas usb.
config EXTCON_RT8973A
tristate "RT8973A EXTCON support"
tristate "Richtek RT8973A EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
......@@ -93,7 +100,7 @@ config EXTCON_RT8973A
from abnormal high input voltage (up to 28V).
config EXTCON_SM5502
tristate "SM5502 EXTCON support"
tristate "Silicon Mitus SM5502 EXTCON support"
depends on I2C
select IRQ_DOMAIN
select REGMAP_I2C
......@@ -105,9 +112,9 @@ config EXTCON_SM5502
config EXTCON_USB_GPIO
tristate "USB GPIO extcon support"
depends on GPIOLIB
depends on GPIOLIB || COMPILE_TEST
help
Say Y here to enable GPIO based USB cable detection extcon support.
Used typically if GPIO is used for USB ID pin detection.
endif # MULTISTATE_SWITCH
endif
......@@ -5,6 +5,7 @@
obj-$(CONFIG_EXTCON) += extcon.o
obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
......
......@@ -29,7 +29,6 @@
* struct adc_jack_data - internal data for adc_jack device driver
* @edev: extcon device.
* @cable_names: list of supported cables.
* @num_cables: size of cable_names.
* @adc_conditions: list of adc value conditions.
* @num_conditions: size of adc_conditions.
* @irq: irq number of attach/detach event (0 if not exist).
......@@ -42,7 +41,6 @@ struct adc_jack_data {
struct extcon_dev *edev;
const char **cable_names;
int num_cables;
struct adc_jack_cond *adc_conditions;
int num_conditions;
......@@ -112,17 +110,6 @@ static int adc_jack_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
data->edev->name = pdata->name;
/* Check the length of array and set num_cables */
for (i = 0; data->edev->supported_cable[i]; i++)
;
if (i == 0 || i > SUPPORTED_CABLE_MAX) {
dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
i - 1);
return -EINVAL;
}
data->num_cables = i;
if (!pdata->adc_conditions ||
!pdata->adc_conditions[0].state) {
......
......@@ -32,13 +32,10 @@
#include <linux/mfd/arizona/core.h>
#include <linux/mfd/arizona/pdata.h>
#include <linux/mfd/arizona/registers.h>
#include <dt-bindings/mfd/arizona.h>
#define ARIZONA_MAX_MICD_RANGE 8
#define ARIZONA_ACCDET_MODE_MIC 0
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
#define ARIZONA_MICD_CLAMP_MODE_JDL 0x4
#define ARIZONA_MICD_CLAMP_MODE_JDH 0x5
#define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
......@@ -94,7 +91,7 @@ struct arizona_extcon_info {
bool detecting;
int jack_flips;
int hpdet_ip;
int hpdet_ip_version;
struct extcon_dev *edev;
};
......@@ -121,17 +118,12 @@ static const int arizona_micd_levels[] = {
1257,
};
#define ARIZONA_CABLE_MECHANICAL 0
#define ARIZONA_CABLE_MICROPHONE 1
#define ARIZONA_CABLE_HEADPHONE 2
#define ARIZONA_CABLE_LINEOUT 3
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
NULL,
static const enum extcon arizona_cable[] = {
EXTCON_MECHANICAL,
EXTCON_MICROPHONE,
EXTCON_HEADPHONE,
EXTCON_LINE_OUT,
EXTCON_NONE,
};
static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
......@@ -145,6 +137,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
switch (arizona->type) {
case WM5110:
case WM8280:
mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
ARIZONA_HP1L_SHRTI;
if (clamp)
......@@ -380,7 +373,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
return ret;
}
switch (info->hpdet_ip) {
switch (info->hpdet_ip_version) {
case 0:
if (!(val & ARIZONA_HP_DONE)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
......@@ -441,7 +434,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
default:
dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
info->hpdet_ip);
info->hpdet_ip_version);
case 2:
if (!(val & ARIZONA_HP_DONE_B)) {
dev_err(arizona->dev, "HPDET did not complete: %x\n",
......@@ -559,7 +552,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
struct arizona_extcon_info *info = data;
struct arizona *arizona = info->arizona;
int id_gpio = arizona->pdata.hpdet_id_gpio;
int report = ARIZONA_CABLE_HEADPHONE;
enum extcon report = EXTCON_HEADPHONE;
int ret, reading;
bool mic = false;
......@@ -573,7 +566,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
}
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
......@@ -604,9 +597,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
/* Report high impedence cables as line outputs */
if (reading >= 5000)
report = ARIZONA_CABLE_LINEOUT;
report = EXTCON_LINE_OUT;
else
report = ARIZONA_CABLE_HEADPHONE;
report = EXTCON_HEADPHONE;
ret = extcon_set_cable_state_(info->edev, report, true);
if (ret != 0)
......@@ -670,9 +663,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
ret = regmap_update_bits(arizona->regmap,
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_MODE_MASK,
ARIZONA_ACCDET_MODE_HPL);
arizona->pdata.hpdet_channel);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
goto err;
}
......@@ -691,8 +684,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_HEADPHONE, true);
ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
......@@ -722,9 +714,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
ARIZONA_ACCESSORY_DETECT_MODE_1,
ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
info->micd_modes[0].src |
ARIZONA_ACCDET_MODE_HPL);
arizona->pdata.hpdet_channel);
if (ret != 0) {
dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
goto err;
}
......@@ -749,8 +741,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
/* Just report headphone */
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_HEADPHONE, true);
ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
......@@ -789,7 +780,7 @@ static void arizona_micd_detect(struct work_struct *work)
mutex_lock(&info->lock);
/* If the cable was removed while measuring ignore the result */
ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
if (ret < 0) {
dev_err(arizona->dev, "Failed to check cable state: %d\n",
ret);
......@@ -838,8 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
arizona_identify_headphone(info);
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_MICROPHONE, true);
EXTCON_MICROPHONE, true);
if (ret != 0)
dev_err(arizona->dev, "Headset report failed: %d\n",
ret);
......@@ -1030,7 +1020,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
if (info->last_jackdet == present) {
dev_dbg(arizona->dev, "Detected jack\n");
ret = extcon_set_cable_state_(info->edev,
ARIZONA_CABLE_MECHANICAL, true);
EXTCON_MECHANICAL, true);
if (ret != 0)
dev_err(arizona->dev, "Mechanical report failed: %d\n",
......@@ -1120,6 +1110,26 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
regmap_update_bits(arizona->regmap, reg, mask, level);
}
static int arizona_extcon_of_get_pdata(struct arizona *arizona)
{
struct arizona_pdata *pdata = &arizona->pdata;
unsigned int val = ARIZONA_ACCDET_MODE_HPL;
of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel", &val);
switch (val) {
case ARIZONA_ACCDET_MODE_HPL:
case ARIZONA_ACCDET_MODE_HPR:
pdata->hpdet_channel = val;
break;
default:
dev_err(arizona->dev,
"Wrong wlf,hpdet-channel DT value %d\n", val);
pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
}
return 0;
}
static int arizona_extcon_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
......@@ -1137,6 +1147,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
if (!info)
return -ENOMEM;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev))
arizona_extcon_of_get_pdata(arizona);
}
info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
if (IS_ERR(info->micvdd)) {
ret = PTR_ERR(info->micvdd);
......@@ -1161,7 +1176,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 1;
info->hpdet_ip_version = 1;
break;
}
break;
......@@ -1172,7 +1187,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
break;
default:
info->micd_clamp = true;
info->hpdet_ip = 2;
info->hpdet_ip_version = 2;
break;
}
break;
......@@ -1185,7 +1200,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
info->edev->name = "Headset Jack";
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret < 0) {
......
/*
* extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
*
* Copyright (C) 2015 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/usb/phy.h>
#include <linux/notifier.h>
#include <linux/extcon.h>
#include <linux/regmap.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/mfd/axp20x.h>
/* Power source status register */
#define PS_STAT_VBUS_TRIGGER BIT(0)
#define PS_STAT_BAT_CHRG_DIR BIT(2)
#define PS_STAT_VBUS_ABOVE_VHOLD BIT(3)
#define PS_STAT_VBUS_VALID BIT(4)
#define PS_STAT_VBUS_PRESENT BIT(5)
/* BC module global register */
#define BC_GLOBAL_RUN BIT(0)
#define BC_GLOBAL_DET_STAT BIT(2)
#define BC_GLOBAL_DBP_TOUT BIT(3)
#define BC_GLOBAL_VLGC_COM_SEL BIT(4)
#define BC_GLOBAL_DCD_TOUT_MASK (BIT(6)|BIT(5))
#define BC_GLOBAL_DCD_TOUT_300MS 0
#define BC_GLOBAL_DCD_TOUT_100MS 1
#define BC_GLOBAL_DCD_TOUT_500MS 2
#define BC_GLOBAL_DCD_TOUT_900MS 3
#define BC_GLOBAL_DCD_DET_SEL BIT(7)
/* BC module vbus control and status register */
#define VBUS_CNTL_DPDM_PD_EN BIT(4)
#define VBUS_CNTL_DPDM_FD_EN BIT(5)
#define VBUS_CNTL_FIRST_PO_STAT BIT(6)
/* BC USB status register */
#define USB_STAT_BUS_STAT_MASK (BIT(3)|BIT(2)|BIT(1)|BIT(0))
#define USB_STAT_BUS_STAT_SHIFT 0
#define USB_STAT_BUS_STAT_ATHD 0
#define USB_STAT_BUS_STAT_CONN 1
#define USB_STAT_BUS_STAT_SUSP 2
#define USB_STAT_BUS_STAT_CONF 3
#define USB_STAT_USB_SS_MODE BIT(4)
#define USB_STAT_DEAD_BAT_DET BIT(6)
#define USB_STAT_DBP_UNCFG BIT(7)
/* BC detect status register */
#define DET_STAT_MASK (BIT(7)|BIT(6)|BIT(5))
#define DET_STAT_SHIFT 5
#define DET_STAT_SDP 1
#define DET_STAT_CDP 2
#define DET_STAT_DCP 3
/* IRQ enable-1 register */
#define PWRSRC_IRQ_CFG_MASK (BIT(4)|BIT(3)|BIT(2))
/* IRQ enable-6 register */
#define BC12_IRQ_CFG_MASK BIT(1)
enum axp288_extcon_reg {
AXP288_PS_STAT_REG = 0x00,
AXP288_PS_BOOT_REASON_REG = 0x02,
AXP288_BC_GLOBAL_REG = 0x2c,
AXP288_BC_VBUS_CNTL_REG = 0x2d,
AXP288_BC_USB_STAT_REG = 0x2e,
AXP288_BC_DET_STAT_REG = 0x2f,
AXP288_PWRSRC_IRQ_CFG_REG = 0x40,
AXP288_BC12_IRQ_CFG_REG = 0x45,
};
enum axp288_mux_select {
EXTCON_GPIO_MUX_SEL_PMIC = 0,
EXTCON_GPIO_MUX_SEL_SOC,
};
enum axp288_extcon_irq {
VBUS_FALLING_IRQ = 0,
VBUS_RISING_IRQ,
MV_CHNG_IRQ,
BC_USB_CHNG_IRQ,
EXTCON_IRQ_END,
};
static const enum extcon axp288_extcon_cables[] = {
EXTCON_SLOW_CHARGER,
EXTCON_CHARGE_DOWNSTREAM,
EXTCON_FAST_CHARGER,
EXTCON_NONE,
};
struct axp288_extcon_info {
struct device *dev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
struct axp288_extcon_pdata *pdata;
int irq[EXTCON_IRQ_END];
struct extcon_dev *edev;
struct notifier_block extcon_nb;
struct usb_phy *otg;
};
/* Power up/down reason string array */
static char *axp288_pwr_up_down_info[] = {
"Last wake caused by user pressing the power button",
"Last wake caused by a charger insertion",
"Last wake caused by a battery insertion",
"Last wake caused by SOC initiated global reset",
"Last wake caused by cold reset",
"Last shutdown caused by PMIC UVLO threshold",
"Last shutdown caused by SOC initiated cold off",
"Last shutdown caused by user pressing the power button",
NULL,
};
/*
* Decode and log the given "reset source indicator" (rsi)
* register and then clear it.
*/
static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
{
char **rsi;
unsigned int val, i, clear_mask = 0;
int ret;
ret = regmap_read(info->regmap, AXP288_PS_BOOT_REASON_REG, &val);
for (i = 0, rsi = axp288_pwr_up_down_info; *rsi; rsi++, i++) {
if (val & BIT(i)) {
dev_dbg(info->dev, "%s\n", *rsi);
clear_mask |= BIT(i);
}
}
/* Clear the register value for next reboot (write 1 to clear bit) */
regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
}
static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
{
static bool notify_otg, notify_charger;
static enum extcon cable;
int ret, stat, cfg, pwr_stat;
u8 chrg_type;
bool vbus_attach = false;
ret = regmap_read(info->regmap, AXP288_PS_STAT_REG, &pwr_stat);
if (ret < 0) {
dev_err(info->dev, "failed to read vbus status\n");
return ret;
}
vbus_attach = (pwr_stat & PS_STAT_VBUS_PRESENT);
if (!vbus_attach)
goto notify_otg;
/* Check charger detection completion status */
ret = regmap_read(info->regmap, AXP288_BC_GLOBAL_REG, &cfg);
if (ret < 0)
goto dev_det_ret;
if (cfg & BC_GLOBAL_DET_STAT) {
dev_dbg(info->dev, "can't complete the charger detection\n");
goto dev_det_ret;
}
ret = regmap_read(info->regmap, AXP288_BC_DET_STAT_REG, &stat);
if (ret < 0)
goto dev_det_ret;
chrg_type = (stat & DET_STAT_MASK) >> DET_STAT_SHIFT;
switch (chrg_type) {
case DET_STAT_SDP:
dev_dbg(info->dev, "sdp cable is connecetd\n");
notify_otg = true;
notify_charger = true;
cable = EXTCON_SLOW_CHARGER;
break;
case DET_STAT_CDP:
dev_dbg(info->dev, "cdp cable is connecetd\n");
notify_otg = true;
notify_charger = true;
cable = EXTCON_CHARGE_DOWNSTREAM;
break;
case DET_STAT_DCP:
dev_dbg(info->dev, "dcp cable is connecetd\n");
notify_charger = true;
cable = EXTCON_FAST_CHARGER;
break;
default:
dev_warn(info->dev,
"disconnect or unknown or ID event\n");
}
notify_otg:
if (notify_otg) {
/*
* If VBUS is absent Connect D+/D- lines to PMIC for BC
* detection. Else connect them to SOC for USB communication.
*/
if (info->pdata->gpio_mux_cntl)
gpiod_set_value(info->pdata->gpio_mux_cntl,
vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC
: EXTCON_GPIO_MUX_SEL_PMIC);
atomic_notifier_call_chain(&info->otg->notifier,
vbus_attach ? USB_EVENT_VBUS : USB_EVENT_NONE, NULL);
}
if (notify_charger)
extcon_set_cable_state_(info->edev, cable, vbus_attach);
/* Clear the flags on disconnect event */
if (!vbus_attach)
notify_otg = notify_charger = false;
return 0;
dev_det_ret:
if (ret < 0)
dev_err(info->dev, "failed to detect BC Mod\n");
return ret;
}
static irqreturn_t axp288_extcon_isr(int irq, void *data)
{
struct axp288_extcon_info *info = data;
int ret;
ret = axp288_handle_chrg_det_event(info);
if (ret < 0)
dev_err(info->dev, "failed to handle the interrupt\n");
return IRQ_HANDLED;
}
static void axp288_extcon_enable_irq(struct axp288_extcon_info *info)
{
/* Unmask VBUS interrupt */
regmap_write(info->regmap, AXP288_PWRSRC_IRQ_CFG_REG,
PWRSRC_IRQ_CFG_MASK);
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, 0);
/* Unmask the BC1.2 complete interrupts */
regmap_write(info->regmap, AXP288_BC12_IRQ_CFG_REG, BC12_IRQ_CFG_MASK);
/* Enable the charger detection logic */
regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
BC_GLOBAL_RUN, BC_GLOBAL_RUN);
}
static int axp288_extcon_probe(struct platform_device *pdev)
{
struct axp288_extcon_info *info;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
int ret, i, pirq, gpio;
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
info->dev = &pdev->dev;
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->pdata = pdev->dev.platform_data;
if (!info->pdata) {
/* Try ACPI provided pdata via device properties */
if (!device_property_present(&pdev->dev,
"axp288_extcon_data\n"))
dev_err(&pdev->dev, "failed to get platform data\n");
return -ENODEV;
}
platform_set_drvdata(pdev, info);
axp288_extcon_log_rsi(info);
/* Initialize extcon device */
info->edev = devm_extcon_dev_allocate(&pdev->dev,
axp288_extcon_cables);
if (IS_ERR(info->edev)) {
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
return PTR_ERR(info->edev);
}
/* Register extcon device */
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
dev_err(&pdev->dev, "failed to register extcon device\n");
return ret;
}
/* Get otg transceiver phy */
info->otg = usb_get_phy(USB_PHY_TYPE_USB2);
if (IS_ERR(info->otg)) {
dev_err(&pdev->dev, "failed to get otg transceiver\n");
return PTR_ERR(info->otg);
}
/* Set up gpio control for USB Mux */
if (info->pdata->gpio_mux_cntl) {
gpio = desc_to_gpio(info->pdata->gpio_mux_cntl);
ret = gpio_request(gpio, "USB_MUX");
if (ret < 0) {
dev_err(&pdev->dev,
"failed to request the gpio=%d\n", gpio);
goto gpio_req_failed;
}
gpiod_direction_output(info->pdata->gpio_mux_cntl,
EXTCON_GPIO_MUX_SEL_PMIC);
}
for (i = 0; i < EXTCON_IRQ_END; i++) {
pirq = platform_get_irq(pdev, i);
info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
if (info->irq[i] < 0) {
dev_err(&pdev->dev,
"failed to get virtual interrupt=%d\n", pirq);
ret = info->irq[i];
goto gpio_req_failed;
}
ret = devm_request_threaded_irq(&pdev->dev, info->irq[i],
NULL, axp288_extcon_isr,
IRQF_ONESHOT | IRQF_NO_SUSPEND,
pdev->name, info);
if (ret) {
dev_err(&pdev->dev, "failed to request interrupt=%d\n",
info->irq[i]);
goto gpio_req_failed;
}
}
/* Enable interrupts */
axp288_extcon_enable_irq(info);
return 0;
gpio_req_failed:
usb_put_phy(info->otg);
return ret;
}
static int axp288_extcon_remove(struct platform_device *pdev)
{
struct axp288_extcon_info *info = platform_get_drvdata(pdev);
usb_put_phy(info->otg);
return 0;
}
static struct platform_driver axp288_extcon_driver = {
.probe = axp288_extcon_probe,
.remove = axp288_extcon_remove,
.driver = {
.name = "axp288_extcon",
},
};
module_platform_driver(axp288_extcon_driver);
MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
MODULE_DESCRIPTION("X-Powers AXP288 extcon driver");
MODULE_LICENSE("GPL v2");
......@@ -104,7 +104,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
extcon_data->edev->name = pdata->name;
extcon_data->gpio = pdata->gpio;
extcon_data->gpio_active_low = pdata->gpio_active_low;
......
......@@ -148,33 +148,14 @@ enum max14577_muic_acc_type {
MAX14577_MUIC_ADC_OPEN,
};
/* max14577 MUIC device support below list of accessories(external connector) */
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_TA,
EXTCON_CABLE_FAST_CHARGER,
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_JIG_USB_ON,
EXTCON_CABLE_JIG_USB_OFF,
EXTCON_CABLE_JIG_UART_OFF,
EXTCON_CABLE_JIG_UART_ON,
_EXTCON_CABLE_NUM,
};
static const char *max14577_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_TA] = "TA",
[EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
[EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
NULL,
static const enum extcon max14577_extcon_cable[] = {
EXTCON_USB,
EXTCON_TA,
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
EXTCON_CHARGE_DOWNSTREAM,
EXTCON_JIG,
EXTCON_NONE,
};
/*
......@@ -348,7 +329,6 @@ static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
static int max14577_muic_jig_handler(struct max14577_muic_info *info,
int cable_type, bool attached)
{
char cable_name[32];
int ret = 0;
u8 path = CTRL1_SW_OPEN;
......@@ -358,18 +338,12 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
switch (cable_type) {
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-OFF");
path = CTRL1_SW_USB;
break;
case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-ON");
path = CTRL1_SW_USB;
break;
case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
/* PATH:AP_UART */
strcpy(cable_name, "JIG-UART-OFF");
path = CTRL1_SW_UART;
break;
default:
......@@ -382,7 +356,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, cable_name, attached);
extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
......@@ -479,20 +453,22 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
extcon_set_cable_state(info->edev, "TA", attached);
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev,
"Charge-downstream", attached);
extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
attached);
break;
case MAX14577_CHARGER_TYPE_SPECIAL_1A:
extcon_set_cable_state(info->edev, "Fast-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
attached);
break;
case MAX14577_CHARGER_TYPE_NONE:
case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
......@@ -742,8 +718,6 @@ static int max14577_muic_probe(struct platform_device *pdev)
return -ENOMEM;
}
info->edev->name = dev_name(&pdev->dev);
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
dev_err(&pdev->dev, "failed to register extcon device\n");
......
......@@ -200,44 +200,17 @@ enum max77693_muic_acc_type {
/*
* MAX77693 MUIC device support below list of accessories(external connector)
*/
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_TA,
EXTCON_CABLE_FAST_CHARGER,
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_MHL,
EXTCON_CABLE_MHL_TA,
EXTCON_CABLE_JIG_USB_ON,
EXTCON_CABLE_JIG_USB_OFF,
EXTCON_CABLE_JIG_UART_OFF,
EXTCON_CABLE_JIG_UART_ON,
EXTCON_CABLE_DOCK_SMART,
EXTCON_CABLE_DOCK_DESK,
EXTCON_CABLE_DOCK_AUDIO,
_EXTCON_CABLE_NUM,
};
static const char *max77693_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-Host",
[EXTCON_CABLE_TA] = "TA",
[EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
[EXTCON_CABLE_MHL_TA] = "MHL-TA",
[EXTCON_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
[EXTCON_CABLE_JIG_UART_ON] = "JIG-UART-ON",
[EXTCON_CABLE_DOCK_SMART] = "Dock-Smart",
[EXTCON_CABLE_DOCK_DESK] = "Dock-Desk",
[EXTCON_CABLE_DOCK_AUDIO] = "Dock-Audio",
NULL,
static const enum extcon max77693_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_TA,
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
EXTCON_CHARGE_DOWNSTREAM,
EXTCON_MHL,
EXTCON_JIG,
EXTCON_DOCK,
EXTCON_NONE,
};
/*
......@@ -484,7 +457,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
int ret = 0;
int vbvolt;
bool cable_attached;
char dock_name[CABLE_NAME_MAX];
enum extcon dock_id;
dev_info(info->dev,
"external connector is %s (adc:0x%02x)\n",
......@@ -507,15 +480,15 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
}
/*
* Notify Dock-Smart/MHL state.
* - Dock-Smart device include three type of cable which
* Notify Dock/MHL state.
* - Dock device include three type of cable which
* are HDMI, USB for mouse/keyboard and micro-usb port
* for USB/TA cable. Dock-Smart device need always exteranl
* power supply(USB/TA cable through micro-usb cable). Dock-
* Smart device support screen output of target to separate
* for USB/TA cable. Dock device need always exteranl
* power supply(USB/TA cable through micro-usb cable). Dock
* device support screen output of target to separate
* monitor and mouse/keyboard for desktop mode.
*
* Features of 'USB/TA cable with Dock-Smart device'
* Features of 'USB/TA cable with Dock device'
* - Support MHL
* - Support external output feature of audio
* - Support charging through micro-usb port without data
......@@ -529,16 +502,16 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "Dock-Smart", attached);
extcon_set_cable_state(info->edev, "MHL", attached);
extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
goto out;
case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE: /* Dock-Desk */
strcpy(dock_name, "Dock-Desk");
dock_id = EXTCON_DOCK;
break;
case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD: /* Dock-Audio */
strcpy(dock_name, "Dock-Audio");
dock_id = EXTCON_DOCK;
if (!attached)
extcon_set_cable_state(info->edev, "USB", false);
extcon_set_cable_state_(info->edev, EXTCON_USB, false);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
......@@ -550,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, dock_name, attached);
extcon_set_cable_state_(info->edev, dock_id, attached);
out:
return 0;
......@@ -615,20 +588,19 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB-Host", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77693_MUIC_GND_AV_CABLE_LOAD:
/* Audio Video Cable with load, PATH:AUDIO */
ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev,
"Audio-video-load", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/* MHL or MHL with USB/TA cable */
extcon_set_cable_state(info->edev, "MHL", attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s cable of gnd type\n",
......@@ -642,7 +614,6 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
static int max77693_muic_jig_handler(struct max77693_muic_info *info,
int cable_type, bool attached)
{
char cable_name[32];
int ret = 0;
u8 path = CONTROL1_SW_OPEN;
......@@ -652,23 +623,13 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
switch (cable_type) {
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF: /* ADC_JIG_USB_OFF */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-OFF");
path = CONTROL1_SW_USB;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON: /* ADC_JIG_USB_ON */
/* PATH:AP_USB */
strcpy(cable_name, "JIG-USB-ON");
path = CONTROL1_SW_USB;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF: /* ADC_JIG_UART_OFF */
/* PATH:AP_UART */
strcpy(cable_name, "JIG-UART-OFF");
path = CONTROL1_SW_UART;
break;
case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON: /* ADC_JIG_UART_ON */
/* PATH:AP_UART */
strcpy(cable_name, "JIG-UART-ON");
path = CONTROL1_SW_UART;
break;
default:
......@@ -681,7 +642,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, cable_name, attached);
extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
......@@ -823,22 +784,22 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
case MAX77693_MUIC_GND_MHL:
case MAX77693_MUIC_GND_MHL_VB:
/*
* MHL cable with MHL-TA(USB/TA) cable
* MHL cable with USB/TA cable
* - MHL cable include two port(HDMI line and separate
* micro-usb port. When the target connect MHL cable,
* extcon driver check whether MHL-TA(USB/TA) cable is
* connected. If MHL-TA cable is connected, extcon
* extcon driver check whether USB/TA cable is
* connected. If USB/TA cable is connected, extcon
* driver notify state to notifiee for charging battery.
*
* Features of 'MHL-TA(USB/TA) with MHL cable'
* Features of 'USB/TA with MHL cable'
* - Support MHL
* - Support charging through micro-usb port without
* data connection
*/
extcon_set_cable_state(info->edev, "MHL-TA", attached);
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
if (!cable_attached)
extcon_set_cable_state(info->edev,
"MHL", cable_attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL,
cable_attached);
break;
}
......@@ -861,11 +822,12 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
* - Support charging through micro-usb port without
* data connection.
*/
extcon_set_cable_state(info->edev, "USB", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB,
attached);
if (!cable_attached)
extcon_set_cable_state(info->edev, "Dock-Audio",
cable_attached);
extcon_set_cable_state_(info->edev, EXTCON_DOCK,
cable_attached);
break;
case MAX77693_MUIC_ADC_RESERVED_ACC_3: /* Dock-Smart */
/*
......@@ -893,10 +855,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "Dock-Smart",
attached);
extcon_set_cable_state(info->edev, "MHL", attached);
extcon_set_cable_state_(info->edev, EXTCON_DOCK,
attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL,
attached);
break;
}
......@@ -929,23 +891,26 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB,
attached);
break;
case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
/* Only TA cable */
extcon_set_cable_state(info->edev, "TA", attached);
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
}
break;
case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev,
"Charge-downstream", attached);
extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
attached);
break;
case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
extcon_set_cable_state(info->edev, "Fast-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
attached);
break;
case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
break;
......@@ -1182,7 +1147,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
return -ENOMEM;
}
info->edev->name = DEV_NAME;
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
......
......@@ -118,36 +118,16 @@ enum max77843_muic_charger_type {
MAX77843_MUIC_CHG_GND,
};
enum {
MAX77843_CABLE_USB = 0,
MAX77843_CABLE_USB_HOST,
MAX77843_CABLE_TA,
MAX77843_CABLE_CHARGE_DOWNSTREAM,
MAX77843_CABLE_FAST_CHARGER,
MAX77843_CABLE_SLOW_CHARGER,
MAX77843_CABLE_MHL,
MAX77843_CABLE_MHL_TA,
MAX77843_CABLE_JIG_USB_ON,
MAX77843_CABLE_JIG_USB_OFF,
MAX77843_CABLE_JIG_UART_ON,
MAX77843_CABLE_JIG_UART_OFF,
MAX77843_CABLE_NUM,
};
static const char *max77843_extcon_cable[] = {
[MAX77843_CABLE_USB] = "USB",
[MAX77843_CABLE_USB_HOST] = "USB-HOST",
[MAX77843_CABLE_TA] = "TA",
[MAX77843_CABLE_CHARGE_DOWNSTREAM] = "CHARGER-DOWNSTREAM",
[MAX77843_CABLE_FAST_CHARGER] = "FAST-CHARGER",
[MAX77843_CABLE_SLOW_CHARGER] = "SLOW-CHARGER",
[MAX77843_CABLE_MHL] = "MHL",
[MAX77843_CABLE_MHL_TA] = "MHL-TA",
[MAX77843_CABLE_JIG_USB_ON] = "JIG-USB-ON",
[MAX77843_CABLE_JIG_USB_OFF] = "JIG-USB-OFF",
[MAX77843_CABLE_JIG_UART_ON] = "JIG-UART-ON",
[MAX77843_CABLE_JIG_UART_OFF] = "JIG-UART-OFF",
static const enum extcon max77843_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_TA,
EXTCON_CHARGE_DOWNSTREAM,
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
EXTCON_MHL,
EXTCON_JIG,
EXTCON_NONE,
};
struct max77843_muic_irq {
......@@ -362,7 +342,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB-HOST", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX77843_MUIC_GND_MHL_VB:
case MAX77843_MUIC_GND_MHL:
......@@ -370,7 +350,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "MHL", attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
default:
dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
......@@ -385,36 +365,29 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
int cable_type, bool attached)
{
int ret;
u8 path = CONTROL1_SW_OPEN;
dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
attached ? "attached" : "detached", cable_type);
switch (cable_type) {
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
path = CONTROL1_SW_USB;
break;
case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
path = CONTROL1_SW_UART;
break;
default:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
break;
return -EINVAL;
}
ret = max77843_muic_set_path(info, path, attached);
if (ret < 0)
return ret;
extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
......@@ -505,36 +478,38 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "USB", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
case MAX77843_MUIC_CHG_DOWNSTREAM:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev,
"CHARGER-DOWNSTREAM", attached);
extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
attached);
break;
case MAX77843_MUIC_CHG_DEDICATED:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "TA", attached);
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_500MA:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
attached);
break;
case MAX77843_MUIC_CHG_SPECIAL_1A:
ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
if (ret < 0)
return ret;
extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
attached);
break;
case MAX77843_MUIC_CHG_GND:
gnd_type = max77843_muic_get_cable_type(info,
......@@ -542,9 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
/* Charger cable on MHL accessory is attach or detach */
if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
extcon_set_cable_state(info->edev, "MHL-TA", true);
extcon_set_cable_state_(info->edev, EXTCON_TA, true);
else if (gnd_type == MAX77843_MUIC_GND_MHL)
extcon_set_cable_state(info->edev, "MHL-TA", false);
extcon_set_cable_state_(info->edev, EXTCON_TA, false);
break;
case MAX77843_MUIC_CHG_NONE:
break;
......
......@@ -145,34 +145,17 @@ struct max8997_muic_info {
int path_uart;
};
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_TA,
EXTCON_CABLE_FAST_CHARGER,
EXTCON_CABLE_SLOW_CHARGER,
EXTCON_CABLE_CHARGE_DOWNSTREAM,
EXTCON_CABLE_MHL,
EXTCON_CABLE_DOCK_DESK,
EXTCON_CABLE_DOCK_CARD,
EXTCON_CABLE_JIG,
_EXTCON_CABLE_NUM,
};
static const char *max8997_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-Host",
[EXTCON_CABLE_TA] = "TA",
[EXTCON_CABLE_FAST_CHARGER] = "Fast-charger",
[EXTCON_CABLE_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CABLE_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_CABLE_MHL] = "MHL",
[EXTCON_CABLE_DOCK_DESK] = "Dock-Desk",
[EXTCON_CABLE_DOCK_CARD] = "Dock-Card",
[EXTCON_CABLE_JIG] = "JIG",
NULL,
static const enum extcon max8997_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_TA,
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
EXTCON_CHARGE_DOWNSTREAM,
EXTCON_MHL,
EXTCON_DOCK,
EXTCON_JIG,
EXTCON_NONE,
};
/*
......@@ -347,10 +330,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
switch (usb_type) {
case MAX8997_USB_HOST:
extcon_set_cable_state(info->edev, "USB-Host", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
break;
case MAX8997_USB_DEVICE:
extcon_set_cable_state(info->edev, "USB", attached);
extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
break;
default:
dev_err(info->dev, "failed to detect %s usb cable\n",
......@@ -374,10 +357,8 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
switch (cable_type) {
case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
extcon_set_cable_state(info->edev, "Dock-desk", attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
extcon_set_cable_state(info->edev, "Dock-card", attached);
extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
break;
default:
dev_err(info->dev, "failed to detect %s dock device\n",
......@@ -400,7 +381,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
return ret;
}
extcon_set_cable_state(info->edev, "JIG", attached);
extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
return 0;
}
......@@ -422,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
return ret;
break;
case MAX8997_MUIC_ADC_MHL:
extcon_set_cable_state(info->edev, "MHL", attached);
extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
break;
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
......@@ -505,17 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
}
break;
case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
extcon_set_cable_state(info->edev,
"Charge-downstream", attached);
extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
attached);
break;
case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
extcon_set_cable_state(info->edev, "TA", attached);
extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
break;
case MAX8997_CHARGER_TYPE_500MA:
extcon_set_cable_state(info->edev, "Slow-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
attached);
break;
case MAX8997_CHARGER_TYPE_1A:
extcon_set_cable_state(info->edev, "Fast-charger", attached);
extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
attached);
break;
default:
dev_err(info->dev,
......@@ -700,7 +683,6 @@ static int max8997_muic_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err_irq;
}
info->edev->name = DEV_NAME;
ret = devm_extcon_dev_register(&pdev->dev, info->edev);
if (ret) {
......
......@@ -29,10 +29,10 @@
#include <linux/of.h>
#include <linux/of_platform.h>
static const char *palmas_extcon_cable[] = {
[0] = "USB",
[1] = "USB-HOST",
NULL,
static const enum extcon palmas_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static const int mutually_exclusive[] = {0x3, 0x0};
......@@ -49,6 +49,7 @@ static void palmas_usb_wakeup(struct palmas *palmas, int enable)
static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
{
struct palmas_usb *palmas_usb = _palmas_usb;
struct extcon_dev *edev = palmas_usb->edev;
unsigned int vbus_line_state;
palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE,
......@@ -57,7 +58,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
extcon_set_cable_state(palmas_usb->edev, "USB", true);
extcon_set_cable_state_(edev, EXTCON_USB, true);
dev_info(palmas_usb->dev, "USB cable is attached\n");
} else {
dev_dbg(palmas_usb->dev,
......@@ -66,7 +67,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(palmas_usb->edev, "USB", false);
extcon_set_cable_state_(edev, EXTCON_USB, false);
dev_info(palmas_usb->dev, "USB cable is detached\n");
} else {
dev_dbg(palmas_usb->dev,
......@@ -81,6 +82,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
{
unsigned int set, id_src;
struct palmas_usb *palmas_usb = _palmas_usb;
struct extcon_dev *edev = palmas_usb->edev;
palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
PALMAS_USB_ID_INT_LATCH_SET, &set);
......@@ -93,7 +95,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
......@@ -101,17 +103,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
PALMAS_USB_ID_INT_LATCH_CLR,
PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
palmas_usb->linkstat = PALMAS_USB_STATE_ID;
extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
}
......@@ -193,7 +195,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to allocate extcon device\n");
return -ENOMEM;
}
palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL);
palmas_usb->edev->mutually_exclusive = mutually_exclusive;
status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev);
......
......@@ -90,27 +90,12 @@ static struct reg_data rt8973a_reg_data[] = {
};
/* List of detectable cables */
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_TA,
EXTCON_CABLE_JIG_OFF_USB,
EXTCON_CABLE_JIG_ON_USB,
EXTCON_CABLE_JIG_OFF_UART,
EXTCON_CABLE_JIG_ON_UART,
EXTCON_CABLE_END,
};
static const char *rt8973a_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-Host",
[EXTCON_CABLE_TA] = "TA",
[EXTCON_CABLE_JIG_OFF_USB] = "JIG-USB-OFF",
[EXTCON_CABLE_JIG_ON_USB] = "JIG-USB-ON",
[EXTCON_CABLE_JIG_OFF_UART] = "JIG-UART-OFF",
[EXTCON_CABLE_JIG_ON_UART] = "JIG-UART-ON",
NULL,
static const enum extcon rt8973a_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_TA,
EXTCON_JIG,
EXTCON_NONE,
};
/* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
......@@ -313,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
enum rt8973a_event_type event)
{
static unsigned int prev_cable_type;
const char **cable_names = info->edev->supported_cable;
unsigned int con_sw = DM_DP_SWITCH_UART;
int ret, idx = 0, cable_type;
int ret, cable_type;
enum extcon id;
bool attached = false;
if (!cable_names)
return 0;
switch (event) {
case RT8973A_EVENT_ATTACH:
cable_type = rt8973a_muic_get_cable_type(info);
......@@ -347,31 +329,25 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
switch (cable_type) {
case RT8973A_MUIC_ADC_OTG:
idx = EXTCON_CABLE_USB_HOST;
id = EXTCON_USB_HOST;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_TA:
idx = EXTCON_CABLE_TA;
id = EXTCON_TA;
con_sw = DM_DP_SWITCH_OPEN;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
idx = EXTCON_CABLE_JIG_OFF_USB;
con_sw = DM_DP_SWITCH_UART;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
idx = EXTCON_CABLE_JIG_ON_USB;
con_sw = DM_DP_SWITCH_UART;
id = EXTCON_JIG;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
idx = EXTCON_CABLE_JIG_OFF_UART;
con_sw = DM_DP_SWITCH_UART;
break;
case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
idx = EXTCON_CABLE_JIG_ON_UART;
id = EXTCON_JIG;
con_sw = DM_DP_SWITCH_UART;
break;
case RT8973A_MUIC_ADC_USB:
idx = EXTCON_CABLE_USB;
id = EXTCON_USB;
con_sw = DM_DP_SWITCH_USB;
break;
case RT8973A_MUIC_ADC_OPEN:
......@@ -421,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
return ret;
/* Change the state of external accessory */
extcon_set_cable_state(info->edev, cable_names[idx], attached);
extcon_set_cable_state_(info->edev, id, attached);
return 0;
}
......@@ -643,7 +619,6 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
dev_err(info->dev, "failed to allocate memory for extcon\n");
return -ENOMEM;
}
info->edev->name = np->name;
/* Register extcon device */
ret = devm_extcon_dev_register(info->dev, info->edev);
......
......@@ -92,19 +92,11 @@ static struct reg_data sm5502_reg_data[] = {
};
/* List of detectable cables */
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_TA,
EXTCON_CABLE_END,
};
static const char *sm5502_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-Host",
[EXTCON_CABLE_TA] = "TA",
NULL,
static const enum extcon sm5502_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_TA,
EXTCON_NONE,
};
/* Define supported accessory type */
......@@ -377,16 +369,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
bool attached)
{
static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
const char **cable_names = info->edev->supported_cable;
unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
unsigned int con_sw = DM_DP_SWITCH_OPEN;
unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
unsigned int idx = 0;
enum extcon id;
int ret;
if (!cable_names)
return 0;
/* Get the type of attached or detached cable */
if (attached)
cable_type = sm5502_muic_get_cable_type(info);
......@@ -396,17 +384,17 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
switch (cable_type) {
case SM5502_MUIC_ADC_OPEN_USB:
idx = EXTCON_CABLE_USB;
id = EXTCON_USB;
con_sw = DM_DP_SWITCH_USB;
vbus_sw = VBUSIN_SWITCH_VBUSOUT_WITH_USB;
break;
case SM5502_MUIC_ADC_OPEN_TA:
idx = EXTCON_CABLE_TA;
id = EXTCON_TA;
con_sw = DM_DP_SWITCH_OPEN;
vbus_sw = VBUSIN_SWITCH_VBUSOUT;
break;
case SM5502_MUIC_ADC_OPEN_USB_OTG:
idx = EXTCON_CABLE_USB_HOST;
id = EXTCON_USB_HOST;
con_sw = DM_DP_SWITCH_USB;
vbus_sw = VBUSIN_SWITCH_OPEN;
break;
......@@ -422,7 +410,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
return ret;
/* Change the state of external accessory */
extcon_set_cable_state(info->edev, cable_names[idx], attached);
extcon_set_cable_state_(info->edev, id, attached);
return 0;
}
......@@ -623,7 +611,6 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
dev_err(info->dev, "failed to allocate memory for extcon\n");
return -ENOMEM;
}
info->edev->name = np->name;
/* Register extcon device */
ret = devm_extcon_dev_register(info->dev, info->edev);
......
......@@ -15,6 +15,7 @@
*/
#include <linux/extcon.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
......@@ -38,18 +39,10 @@ struct usb_extcon_info {
struct delayed_work wq_detcable;
};
/* List of detectable cables */
enum {
EXTCON_CABLE_USB = 0,
EXTCON_CABLE_USB_HOST,
EXTCON_CABLE_END,
};
static const char *usb_extcon_cable[] = {
[EXTCON_CABLE_USB] = "USB",
[EXTCON_CABLE_USB_HOST] = "USB-HOST",
NULL,
static const enum extcon usb_extcon_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static void usb_extcon_detect_cable(struct work_struct *work)
......@@ -67,24 +60,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
* As we don't have event for USB peripheral cable attached,
* we simulate USB peripheral attach here.
*/
extcon_set_cable_state(info->edev,
usb_extcon_cable[EXTCON_CABLE_USB_HOST],
false);
extcon_set_cable_state(info->edev,
usb_extcon_cable[EXTCON_CABLE_USB],
true);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
extcon_set_cable_state_(info->edev, EXTCON_USB, true);
} else {
/*
* ID = 0 means USB HOST cable attached.
* As we don't have event for USB peripheral cable detached,
* we simulate USB peripheral detach here.
*/
extcon_set_cable_state(info->edev,
usb_extcon_cable[EXTCON_CABLE_USB],
false);
extcon_set_cable_state(info->edev,
usb_extcon_cable[EXTCON_CABLE_USB_HOST],
true);
extcon_set_cable_state_(info->edev, EXTCON_USB, false);
extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
}
}
......@@ -113,7 +98,7 @@ static int usb_extcon_probe(struct platform_device *pdev)
return -ENOMEM;
info->dev = dev;
info->id_gpiod = devm_gpiod_get(&pdev->dev, "id");
info->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
if (IS_ERR(info->id_gpiod)) {
dev_err(dev, "failed to get ID GPIO\n");
return PTR_ERR(info->id_gpiod);
......
/*
* drivers/extcon/extcon_class.c
* drivers/extcon/extcon.c - External Connector (extcon) framework.
*
* External connector (extcon) class driver
*
* Copyright (C) 2015 Samsung Electronics
* Author: Chanwoo Choi <cw00.choi@samsung.com>
*
* Copyright (C) 2012 Samsung Electronics
* Author: Donggeun Kim <dg77.kim@samsung.com>
* Author: MyungJoo Ham <myungjoo.ham@samsung.com>
......@@ -19,8 +22,7 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
*/
#include <linux/module.h>
#include <linux/types.h>
......@@ -33,36 +35,41 @@
#include <linux/slab.h>
#include <linux/sysfs.h>
/*
* extcon_cable_name suggests the standard cable names for commonly used
* cable types.
*
* However, please do not use extcon_cable_name directly for extcon_dev
* struct's supported_cable pointer unless your device really supports
* every single port-type of the following cable names. Please choose cable
* names that are actually used in your extcon device.
*/
const char extcon_cable_name[][CABLE_NAME_MAX + 1] = {
#define SUPPORTED_CABLE_MAX 32
#define CABLE_NAME_MAX 30
static const char *extcon_name[] = {
/* USB external connector */
[EXTCON_USB] = "USB",
[EXTCON_USB_HOST] = "USB-Host",
[EXTCON_USB_HOST] = "USB-HOST",
/* Charger external connector */
[EXTCON_TA] = "TA",
[EXTCON_FAST_CHARGER] = "Fast-charger",
[EXTCON_SLOW_CHARGER] = "Slow-charger",
[EXTCON_CHARGE_DOWNSTREAM] = "Charge-downstream",
[EXTCON_FAST_CHARGER] = "FAST-CHARGER",
[EXTCON_SLOW_CHARGER] = "SLOW-CHARGER",
[EXTCON_CHARGE_DOWNSTREAM] = "CHARGE-DOWNSTREAM",
/* Audio/Video external connector */
[EXTCON_LINE_IN] = "LINE-IN",
[EXTCON_LINE_OUT] = "LINE-OUT",
[EXTCON_MICROPHONE] = "MICROPHONE",
[EXTCON_HEADPHONE] = "HEADPHONE",
[EXTCON_HDMI] = "HDMI",
[EXTCON_MHL] = "MHL",
[EXTCON_DVI] = "DVI",
[EXTCON_VGA] = "VGA",
[EXTCON_DOCK] = "Dock",
[EXTCON_LINE_IN] = "Line-in",
[EXTCON_LINE_OUT] = "Line-out",
[EXTCON_MIC_IN] = "Microphone",
[EXTCON_HEADPHONE_OUT] = "Headphone",
[EXTCON_SPDIF_IN] = "SPDIF-in",
[EXTCON_SPDIF_OUT] = "SPDIF-out",
[EXTCON_VIDEO_IN] = "Video-in",
[EXTCON_VIDEO_OUT] = "Video-out",
[EXTCON_MECHANICAL] = "Mechanical",
[EXTCON_SPDIF_IN] = "SPDIF-IN",
[EXTCON_SPDIF_OUT] = "SPDIF-OUT",
[EXTCON_VIDEO_IN] = "VIDEO-IN",
[EXTCON_VIDEO_OUT] = "VIDEO-OUT",
/* Etc external connector */
[EXTCON_DOCK] = "DOCK",
[EXTCON_JIG] = "JIG",
[EXTCON_MECHANICAL] = "MECHANICAL",
NULL,
};
static struct class *extcon_class;
......@@ -102,6 +109,53 @@ static int check_mutually_exclusive(struct extcon_dev *edev, u32 new_state)
return 0;
}
static int find_cable_index_by_id(struct extcon_dev *edev, const enum extcon id)
{
int i;
/* Find the the index of extcon cable in edev->supported_cable */
for (i = 0; i < edev->max_supported; i++) {
if (edev->supported_cable[i] == id)
return i;
}
return -EINVAL;
}
static int find_cable_index_by_name(struct extcon_dev *edev, const char *name)
{
enum extcon id = EXTCON_NONE;
int i;
if (edev->max_supported == 0)
return -EINVAL;
/* Find the the number of extcon cable */
for (i = 0; i < EXTCON_END; i++) {
if (!extcon_name[i])
continue;
if (!strncmp(extcon_name[i], name, CABLE_NAME_MAX)) {
id = i;
break;
}
}
if (id == EXTCON_NONE)
return -EINVAL;
return find_cable_index_by_id(edev, id);
}
static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
{
if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
*attached = new ? true : false;
return true;
}
return false;
}
static ssize_t state_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
......@@ -119,11 +173,9 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
if (edev->max_supported == 0)
return sprintf(buf, "%u\n", edev->state);
for (i = 0; i < SUPPORTED_CABLE_MAX; i++) {
if (!edev->supported_cable[i])
break;
for (i = 0; i < edev->max_supported; i++) {
count += sprintf(buf + count, "%s=%d\n",
edev->supported_cable[i],
extcon_name[edev->supported_cable[i]],
!!(edev->state & (1 << i)));
}
......@@ -155,15 +207,7 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
{
struct extcon_dev *edev = dev_get_drvdata(dev);
/* Optional callback given by the user */
if (edev->print_name) {
int ret = edev->print_name(edev, buf);
if (ret >= 0)
return ret;
}
return sprintf(buf, "%s\n", dev_name(&edev->dev));
return sprintf(buf, "%s\n", edev->name);
}
static DEVICE_ATTR_RO(name);
......@@ -172,9 +216,10 @@ static ssize_t cable_name_show(struct device *dev,
{
struct extcon_cable *cable = container_of(attr, struct extcon_cable,
attr_name);
int i = cable->cable_index;
return sprintf(buf, "%s\n",
cable->edev->supported_cable[cable->cable_index]);
extcon_name[cable->edev->supported_cable[i]]);
}
static ssize_t cable_state_show(struct device *dev,
......@@ -211,23 +256,27 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
char *envp[3];
int env_offset = 0;
int length;
int index;
unsigned long flags;
bool attached;
spin_lock_irqsave(&edev->lock, flags);
if (edev->state != ((edev->state & ~mask) | (state & mask))) {
u32 old_state = edev->state;
if (check_mutually_exclusive(edev, (edev->state & ~mask) |
(state & mask))) {
spin_unlock_irqrestore(&edev->lock, flags);
return -EPERM;
}
for (index = 0; index < edev->max_supported; index++) {
if (is_extcon_changed(edev->state, state, index, &attached))
raw_notifier_call_chain(&edev->nh[index], attached, edev);
}
edev->state &= ~mask;
edev->state |= state & mask;
raw_notifier_call_chain(&edev->nh, old_state, edev);
/* This could be in interrupt handler */
prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
if (prop_buf) {
......@@ -284,39 +333,19 @@ int extcon_set_state(struct extcon_dev *edev, u32 state)
EXPORT_SYMBOL_GPL(extcon_set_state);
/**
* extcon_find_cable_index() - Get the cable index based on the cable name.
* extcon_get_cable_state_() - Get the status of a specific cable.
* @edev: the extcon device that has the cable.
* @cable_name: cable name to be searched.
*
* Note that accessing a cable state based on cable_index is faster than
* cable_name because using cable_name induces a loop with strncmp().
* Thus, when get/set_cable_state is repeatedly used, using cable_index
* is recommended.
* @id: the unique id of each external connector in extcon enumeration.
*/
int extcon_find_cable_index(struct extcon_dev *edev, const char *cable_name)
int extcon_get_cable_state_(struct extcon_dev *edev, const enum extcon id)
{
int i;
int index;
if (edev->supported_cable) {
for (i = 0; edev->supported_cable[i]; i++) {
if (!strncmp(edev->supported_cable[i],
cable_name, CABLE_NAME_MAX))
return i;
}
}
index = find_cable_index_by_id(edev, id);
if (index < 0)
return index;
return -EINVAL;
}
EXPORT_SYMBOL_GPL(extcon_find_cable_index);
/**
* extcon_get_cable_state_() - Get the status of a specific cable.
* @edev: the extcon device that has the cable.
* @index: cable index that can be retrieved by extcon_find_cable_index().
*/
int extcon_get_cable_state_(struct extcon_dev *edev, int index)
{
if (index < 0 || (edev->max_supported && edev->max_supported <= index))
if (edev->max_supported && edev->max_supported <= index)
return -EINVAL;
return !!(edev->state & (1 << index));
......@@ -332,7 +361,7 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
*/
int extcon_get_cable_state(struct extcon_dev *edev, const char *cable_name)
{
return extcon_get_cable_state_(edev, extcon_find_cable_index
return extcon_get_cable_state_(edev, find_cable_index_by_name
(edev, cable_name));
}
EXPORT_SYMBOL_GPL(extcon_get_cable_state);
......@@ -340,17 +369,22 @@ EXPORT_SYMBOL_GPL(extcon_get_cable_state);
/**
* extcon_set_cable_state_() - Set the status of a specific cable.
* @edev: the extcon device that has the cable.
* @index: cable index that can be retrieved by
* extcon_find_cable_index().
* @cable_state: the new cable status. The default semantics is
* @id: the unique id of each external connector
* in extcon enumeration.
* @state: the new cable status. The default semantics is
* true: attached / false: detached.
*/
int extcon_set_cable_state_(struct extcon_dev *edev,
int index, bool cable_state)
int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
bool cable_state)
{
u32 state;
int index;
if (index < 0 || (edev->max_supported && edev->max_supported <= index))
index = find_cable_index_by_id(edev, id);
if (index < 0)
return index;
if (edev->max_supported && edev->max_supported <= index)
return -EINVAL;
state = cable_state ? (1 << index) : 0;
......@@ -370,7 +404,7 @@ EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
int extcon_set_cable_state(struct extcon_dev *edev,
const char *cable_name, bool cable_state)
{
return extcon_set_cable_state_(edev, extcon_find_cable_index
return extcon_set_cable_state_(edev, find_cable_index_by_name
(edev, cable_name), cable_state);
}
EXPORT_SYMBOL_GPL(extcon_set_cable_state);
......@@ -395,29 +429,6 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
}
EXPORT_SYMBOL_GPL(extcon_get_extcon_dev);
static int _call_per_cable(struct notifier_block *nb, unsigned long val,
void *ptr)
{
struct extcon_specific_cable_nb *obj = container_of(nb,
struct extcon_specific_cable_nb, internal_nb);
struct extcon_dev *edev = ptr;
if ((val & (1 << obj->cable_index)) !=
(edev->state & (1 << obj->cable_index))) {
bool cable_state = true;
obj->previous_value = val;
if (val & (1 << obj->cable_index))
cable_state = false;
return obj->user_nb->notifier_call(obj->user_nb,
cable_state, ptr);
}
return NOTIFY_OK;
}
/**
* extcon_register_interest() - Register a notifier for a state change of a
* specific cable, not an entier set of cables of a
......@@ -456,20 +467,18 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
if (!obj->edev)
return -ENODEV;
obj->cable_index = extcon_find_cable_index(obj->edev,
cable_name);
obj->cable_index = find_cable_index_by_name(obj->edev,
cable_name);
if (obj->cable_index < 0)
return obj->cable_index;
obj->user_nb = nb;
obj->internal_nb.notifier_call = _call_per_cable;
spin_lock_irqsave(&obj->edev->lock, flags);
ret = raw_notifier_chain_register(&obj->edev->nh,
&obj->internal_nb);
ret = raw_notifier_chain_register(
&obj->edev->nh[obj->cable_index],
obj->user_nb);
spin_unlock_irqrestore(&obj->edev->lock, flags);
return ret;
} else {
struct class_dev_iter iter;
struct extcon_dev *extd;
......@@ -481,7 +490,7 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
while ((dev = class_dev_iter_next(&iter))) {
extd = dev_get_drvdata(dev);
if (extcon_find_cable_index(extd, cable_name) < 0)
if (find_cable_index_by_name(extd, cable_name) < 0)
continue;
class_dev_iter_exit(&iter);
......@@ -489,8 +498,10 @@ int extcon_register_interest(struct extcon_specific_cable_nb *obj,
cable_name, nb);
}
return -ENODEV;
ret = -ENODEV;
}
return ret;
}
EXPORT_SYMBOL_GPL(extcon_register_interest);
......@@ -509,7 +520,8 @@ int extcon_unregister_interest(struct extcon_specific_cable_nb *obj)
return -EINVAL;
spin_lock_irqsave(&obj->edev->lock, flags);
ret = raw_notifier_chain_unregister(&obj->edev->nh, &obj->internal_nb);
ret = raw_notifier_chain_unregister(
&obj->edev->nh[obj->cable_index], obj->user_nb);
spin_unlock_irqrestore(&obj->edev->lock, flags);
return ret;
......@@ -519,21 +531,24 @@ EXPORT_SYMBOL_GPL(extcon_unregister_interest);
/**
* extcon_register_notifier() - Register a notifiee to get notified by
* any attach status changes from the extcon.
* @edev: the extcon device.
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
*
* Note that the second parameter given to the callback of nb (val) is
* "old_state", not the current state. The current state can be retrieved
* by looking at the third pameter (edev pointer)'s state value.
*/
int extcon_register_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
int extcon_register_notifier(struct extcon_dev *edev, enum extcon id,
struct notifier_block *nb)
{
unsigned long flags;
int ret;
int ret, idx;
idx = find_cable_index_by_id(edev, id);
spin_lock_irqsave(&edev->lock, flags);
ret = raw_notifier_chain_register(&edev->nh, nb);
ret = raw_notifier_chain_register(&edev->nh[idx], nb);
spin_unlock_irqrestore(&edev->lock, flags);
return ret;
......@@ -542,17 +557,20 @@ EXPORT_SYMBOL_GPL(extcon_register_notifier);
/**
* extcon_unregister_notifier() - Unregister a notifiee from the extcon device.
* @edev: the extcon device.
* @nb: a registered notifier block to be unregistered.
* @edev: the extcon device that has the external connecotr.
* @id: the unique id of each external connector in extcon enumeration.
* @nb: a notifier block to be registered.
*/
int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
int extcon_unregister_notifier(struct extcon_dev *edev, enum extcon id,
struct notifier_block *nb)
{
unsigned long flags;
int ret;
int ret, idx;
idx = find_cable_index_by_id(edev, id);
spin_lock_irqsave(&edev->lock, flags);
ret = raw_notifier_chain_unregister(&edev->nh, nb);
ret = raw_notifier_chain_unregister(&edev->nh[idx], nb);
spin_unlock_irqrestore(&edev->lock, flags);
return ret;
......@@ -595,7 +613,7 @@ static void dummy_sysfs_dev_release(struct device *dev)
/*
* extcon_dev_allocate() - Allocate the memory of extcon device.
* @supported_cable: Array of supported cable names ending with NULL.
* @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
*
......@@ -605,7 +623,7 @@ static void dummy_sysfs_dev_release(struct device *dev)
*
* Return the pointer of extcon device if success or ERR_PTR(err) if fail
*/
struct extcon_dev *extcon_dev_allocate(const char **supported_cable)
struct extcon_dev *extcon_dev_allocate(const enum extcon *supported_cable)
{
struct extcon_dev *edev;
......@@ -647,7 +665,7 @@ static void devm_extcon_dev_release(struct device *dev, void *res)
/**
* devm_extcon_dev_allocate - Allocate managed extcon device
* @dev: device owning the extcon device being created
* @supported_cable: Array of supported cable names ending with NULL.
* @supported_cable: Array of supported extcon ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
*
......@@ -659,7 +677,7 @@ static void devm_extcon_dev_release(struct device *dev, void *res)
* or ERR_PTR(err) if fail
*/
struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
const char **supported_cable)
const enum extcon *supported_cable)
{
struct extcon_dev **ptr, *edev;
......@@ -701,6 +719,7 @@ EXPORT_SYMBOL_GPL(devm_extcon_dev_free);
int extcon_dev_register(struct extcon_dev *edev)
{
int ret, index = 0;
static atomic_t edev_no = ATOMIC_INIT(-1);
if (!extcon_class) {
ret = create_extcon_class();
......@@ -708,30 +727,29 @@ int extcon_dev_register(struct extcon_dev *edev)
return ret;
}
if (edev->supported_cable) {
/* Get size of array */
for (index = 0; edev->supported_cable[index]; index++)
;
edev->max_supported = index;
} else {
edev->max_supported = 0;
}
if (!edev->supported_cable)
return -EINVAL;
for (; edev->supported_cable[index] != EXTCON_NONE; index++);
edev->max_supported = index;
if (index > SUPPORTED_CABLE_MAX) {
dev_err(&edev->dev, "extcon: maximum number of supported cables exceeded.\n");
dev_err(&edev->dev,
"exceed the maximum number of supported cables\n");
return -EINVAL;
}
edev->dev.class = extcon_class;
edev->dev.release = extcon_dev_release;
edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
edev->name = dev_name(edev->dev.parent);
if (IS_ERR_OR_NULL(edev->name)) {
dev_err(&edev->dev,
"extcon device name is null\n");
return -EINVAL;
}
dev_set_name(&edev->dev, "%s", edev->name);
dev_set_name(&edev->dev, "extcon%lu",
(unsigned long)atomic_inc_return(&edev_no));
if (edev->max_supported) {
char buf[10];
......@@ -864,7 +882,15 @@ int extcon_dev_register(struct extcon_dev *edev)
spin_lock_init(&edev->lock);
RAW_INIT_NOTIFIER_HEAD(&edev->nh);
edev->nh = devm_kzalloc(&edev->dev,
sizeof(*edev->nh) * edev->max_supported, GFP_KERNEL);
if (!edev->nh) {
ret = -ENOMEM;
goto err_dev;
}
for (index = 0; index < edev->max_supported; index++)
RAW_INIT_NOTIFIER_HEAD(&edev->nh[index]);
dev_set_drvdata(&edev->dev, edev);
edev->state = 0;
......@@ -1044,6 +1070,15 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
#endif /* CONFIG_OF */
EXPORT_SYMBOL_GPL(extcon_get_edev_by_phandle);
/**
* extcon_get_edev_name() - Get the name of the extcon device.
* @edev: the extcon device
*/
const char *extcon_get_edev_name(struct extcon_dev *edev)
{
return !edev ? NULL : edev->name;
}
static int __init extcon_class_init(void)
{
return create_extcon_class();
......@@ -1059,6 +1094,7 @@ static void __exit extcon_class_exit(void)
}
module_exit(extcon_class_exit);
MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>");
MODULE_AUTHOR("Mike Lockwood <lockwood@android.com>");
MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>");
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
......
......@@ -60,10 +60,11 @@ struct tahvo_usb {
struct extcon_dev extcon;
};
static const char *tahvo_cable[] = {
"USB-HOST",
"USB",
NULL,
static const enum extcon tahvo_cable[] = {
EXTCON_USB,
EXTCON_USB_HOST,
EXTCON_NONE,
};
static ssize_t vbus_state_show(struct device *device,
......
......@@ -90,4 +90,8 @@
#define ARIZONA_INMODE_SE 1
#define ARIZONA_INMODE_DMIC 2
#define ARIZONA_ACCDET_MODE_MIC 0
#define ARIZONA_ACCDET_MODE_HPL 1
#define ARIZONA_ACCDET_MODE_HPR 2
#endif
/*
* External connector (extcon) class driver
*
* Copyright (C) 2015 Samsung Electronics
* Author: Chanwoo Choi <cw00.choi@samsung.com>
*
* Copyright (C) 2012 Samsung Electronics
* Author: Donggeun Kim <dg77.kim@samsung.com>
* Author: MyungJoo Ham <myungjoo.ham@samsung.com>
......@@ -27,50 +30,41 @@
#include <linux/notifier.h>
#include <linux/sysfs.h>
#define SUPPORTED_CABLE_MAX 32
#define CABLE_NAME_MAX 30
/*
* The standard cable name is to help support general notifier
* and notifiee device drivers to share the common names.
* Please use standard cable names unless your notifier device has
* a very unique and abnormal cable or
* the cable type is supposed to be used with only one unique
* pair of notifier/notifiee devices.
*
* Please add any other "standard" cables used with extcon dev.
*
* You may add a dot and number to specify version or specification
* of the specific cable if it is required. (e.g., "Fast-charger.18"
* and "Fast-charger.10" for 1.8A and 1.0A chargers)
* However, the notifiee and notifier should be able to handle such
* string and if the notifiee can negotiate the protocol or identify,
* you don't need such convention. This convention is helpful when
* notifier can distinguish but notifiee cannot.
*/
enum extcon_cable_name {
EXTCON_USB = 0,
EXTCON_USB_HOST,
EXTCON_TA, /* Travel Adaptor */
EXTCON_FAST_CHARGER,
EXTCON_SLOW_CHARGER,
EXTCON_CHARGE_DOWNSTREAM, /* Charging an external device */
EXTCON_HDMI,
EXTCON_MHL,
EXTCON_DVI,
EXTCON_VGA,
EXTCON_DOCK,
EXTCON_LINE_IN,
EXTCON_LINE_OUT,
EXTCON_MIC_IN,
EXTCON_HEADPHONE_OUT,
EXTCON_SPDIF_IN,
EXTCON_SPDIF_OUT,
EXTCON_VIDEO_IN,
EXTCON_VIDEO_OUT,
EXTCON_MECHANICAL,
enum extcon {
EXTCON_NONE = 0x0,
/* USB external connector */
EXTCON_USB = 0x1,
EXTCON_USB_HOST = 0x2,
/* Charger external connector */
EXTCON_TA = 0x10,
EXTCON_FAST_CHARGER = 0x11,
EXTCON_SLOW_CHARGER = 0x12,
EXTCON_CHARGE_DOWNSTREAM = 0x13,
/* Audio/Video external connector */
EXTCON_LINE_IN = 0x20,
EXTCON_LINE_OUT = 0x21,
EXTCON_MICROPHONE = 0x22,
EXTCON_HEADPHONE = 0x23,
EXTCON_HDMI = 0x30,
EXTCON_MHL = 0x31,
EXTCON_DVI = 0x32,
EXTCON_VGA = 0x33,
EXTCON_SPDIF_IN = 0x34,
EXTCON_SPDIF_OUT = 0x35,
EXTCON_VIDEO_IN = 0x36,
EXTCON_VIDEO_OUT = 0x37,
/* Etc external connector */
EXTCON_DOCK = 0x50,
EXTCON_JIG = 0x51,
EXTCON_MECHANICAL = 0x52,
EXTCON_END,
};
extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
struct extcon_cable;
......@@ -78,7 +72,7 @@ struct extcon_cable;
* struct extcon_dev - An extcon device represents one external connector.
* @name: The name of this extcon device. Parent device name is
* used if NULL.
* @supported_cable: Array of supported cable names ending with NULL.
* @supported_cable: Array of supported cable names ending with EXTCON_NONE.
* If supported_cable is NULL, cable name related APIs
* are disabled.
* @mutually_exclusive: Array of mutually exclusive set of cables that cannot
......@@ -89,16 +83,14 @@ struct extcon_cable;
* be attached simulataneously. {0x7, 0} is equivalent to
* {0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
* can be no simultaneous connections.
* @print_name: An optional callback to override the method to print the
* name of the extcon device.
* @print_state: An optional callback to override the method to print the
* status of the extcon device.
* @dev: Device of this extcon.
* @state: Attach/detach state of this extcon. Do not provide at
* register-time.
* @nh: Notifier for the state change events from this extcon
* @entry: To support list of extcon devices so that users can search
* for extcon devices based on the extcon name.
* @entry: To support list of extcon devices so that users can
* search for extcon devices based on the extcon name.
* @lock:
* @max_supported: Internal value to store the number of cables.
* @extcon_dev_type: Device_type struct to provide attribute_groups
......@@ -113,16 +105,15 @@ struct extcon_cable;
struct extcon_dev {
/* Optional user initializing data */
const char *name;
const char **supported_cable;
const enum extcon *supported_cable;
const u32 *mutually_exclusive;
/* Optional callbacks to override class functions */
ssize_t (*print_name)(struct extcon_dev *edev, char *buf);
ssize_t (*print_state)(struct extcon_dev *edev, char *buf);
/* Internal data. Please do not set. */
struct device dev;
struct raw_notifier_head nh;
struct raw_notifier_head *nh;
struct list_head entry;
int max_supported;
spinlock_t lock; /* could be called by irq handler */
......@@ -161,8 +152,6 @@ struct extcon_cable {
/**
* struct extcon_specific_cable_nb - An internal data for
* extcon_register_interest().
* @internal_nb: A notifier block bridging extcon notifier
* and cable notifier.
* @user_nb: user provided notifier block for events from
* a specific cable.
* @cable_index: the target cable.
......@@ -170,7 +159,6 @@ struct extcon_cable {
* @previous_value: the saved previous event value.
*/
struct extcon_specific_cable_nb {
struct notifier_block internal_nb;
struct notifier_block *user_nb;
int cable_index;
struct extcon_dev *edev;
......@@ -194,10 +182,10 @@ extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
/*
* Following APIs control the memory of extcon device.
*/
extern struct extcon_dev *extcon_dev_allocate(const char **cables);
extern struct extcon_dev *extcon_dev_allocate(const enum extcon *cable);
extern void extcon_dev_free(struct extcon_dev *edev);
extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
const char **cables);
const enum extcon *cable);
extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
/*
......@@ -216,13 +204,10 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
/*
* get/set_cable_state access each bit of the 32b encoded state value.
* They are used to access the status of each cable based on the cable_name
* or cable_index, which is retrieved by extcon_find_cable_index
* They are used to access the status of each cable based on the cable_name.
*/
extern int extcon_find_cable_index(struct extcon_dev *sdev,
const char *cable_name);
extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index);
extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index,
extern int extcon_get_cable_state_(struct extcon_dev *edev, enum extcon id);
extern int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
bool cable_state);
extern int extcon_get_cable_state(struct extcon_dev *edev,
......@@ -249,16 +234,21 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb);
* we do not recommend to use this for normal 'notifiee' device drivers who
* want to be notified by a specific external port of the notifier.
*/
extern int extcon_register_notifier(struct extcon_dev *edev,
extern int extcon_register_notifier(struct extcon_dev *edev, enum extcon id,
struct notifier_block *nb);
extern int extcon_unregister_notifier(struct extcon_dev *edev, enum extcon id,
struct notifier_block *nb);
extern int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb);
/*
* Following API get the extcon device from devicetree.
* This function use phandle of devicetree to get extcon device directly.
*/
extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index);
extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
int index);
/* Following API to get information of extcon device */
extern const char *extcon_get_edev_name(struct extcon_dev *edev);
#else /* CONFIG_EXTCON */
static inline int extcon_dev_register(struct extcon_dev *edev)
{
......@@ -276,7 +266,7 @@ static inline int devm_extcon_dev_register(struct device *dev,
static inline void devm_extcon_dev_unregister(struct device *dev,
struct extcon_dev *edev) { }
static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
static inline struct extcon_dev *extcon_dev_allocate(const enum extcon *cable)
{
return ERR_PTR(-ENOSYS);
}
......@@ -284,7 +274,7 @@ static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
static inline void extcon_dev_free(struct extcon_dev *edev) { }
static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
const char **cables)
const enum extcon *cable)
{
return ERR_PTR(-ENOSYS);
}
......@@ -307,20 +297,14 @@ static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
return 0;
}
static inline int extcon_find_cable_index(struct extcon_dev *edev,
const char *cable_name)
{
return 0;
}
static inline int extcon_get_cable_state_(struct extcon_dev *edev,
int cable_index)
enum extcon id)
{
return 0;
}
static inline int extcon_set_cable_state_(struct extcon_dev *edev,
int cable_index, bool cable_state)
enum extcon id, bool cable_state)
{
return 0;
}
......@@ -343,13 +327,15 @@ static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
}
static inline int extcon_register_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
enum extcon id,
struct notifier_block *nb)
{
return 0;
}
static inline int extcon_unregister_notifier(struct extcon_dev *edev,
struct notifier_block *nb)
enum extcon id,
struct notifier_block *nb)
{
return 0;
}
......
......@@ -44,7 +44,7 @@ struct adc_jack_cond {
* @consumer_channel: Unique name to identify the channel on the consumer
* side. This typically describes the channels used within
* the consumer. E.g. 'battery_voltage'
* @cable_names: array of cable names ending with null.
* @cable_names: array of extcon id for supported cables.
* @adc_contitions: array of struct adc_jack_cond conditions ending
* with .state = 0 entry. This describes how to decode
* adc values into extcon state.
......@@ -58,8 +58,7 @@ struct adc_jack_pdata {
const char *name;
const char *consumer_channel;
/* The last entry should be NULL */
const char **cable_names;
const enum extcon *cable_names;
/* The last entry's state should be 0 */
struct adc_jack_cond *adc_conditions;
......
......@@ -121,6 +121,9 @@ struct arizona_pdata {
/** GPIO used for mic isolation with HPDET */
int hpdet_id_gpio;
/** Channel to use for headphone detection */
unsigned int hpdet_channel;
/** Extra debounce timeout used during initial mic detection (ms) */
int micd_detect_debounce;
......
......@@ -275,4 +275,9 @@ struct axp20x_fg_pdata {
int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
};
struct axp288_extcon_pdata {
/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
struct gpio_desc *gpio_mux_cntl;
};
#endif /* __LINUX_MFD_AXP20X_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment