Merge tag 'extcon-next-for-4.2' of...

Merge tag 'extcon-next-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon for v4.2

This patchset include the huge update of extcon core and add the new one extcon
driver and fix minor isseu of extcon drivers.

Detailed description for patchset:
1. Update the extcon core.
- Modify the extcon device name on sysfs from device name name to 'extcon[X]'
as following because if same extcon device are included in H/W development board,
the one of the two device driver might be failed on the probe().
: /sys/class/extcon/[device name] -> /sys/class/extcon/extcon[X]

- Use the unique id for external connectors instead of legacy string name.
Previously, extcon used the string name to identify the type of external
connectors. This way have the many potential issues. So, extcon core define the
unique id for each external connectors as following:

	enum extcon {
		EXTCON_NONE             = 0x0,

		/* USB external connector */
		EXTCON_USB              = 0x1,
		EXTCON_USB_HOST		= 0x2,

		/* Charger external connector */
		EXTCON_TA		= 0x10,
		EXTCON_FAST_CHARGER	= 0x11,
		EXTCON_SLOW_CHARGER	= 0x12,
		EXTCON_CHARGE_DOWNSTREAM = 0x13,

		/* Audio and video external connector */
		EXTCON_LINE_IN		= 0x20,
		EXTCON_LINE_OUT		= 0x21,
		EXTCON_MICROPHONE	= 0x22,
		EXTCON_HEADPHONE	= 0x23,
		...
	};

- Update tye prototype of extcon_register_notifier() by using the unique id
(enum extcon) of external connectors.

- Add extcon_get_edev_name() API to get the name of extcon device on extcon
client driver because the name is included in 'struct extcon_dev' and 'struct
extcon_dev' should be handled in only drivers/extcon directory. So. if extcon
client need the name of extcon device, they could use this function.

- Unify the jig/dock and MHL-TA cable name on extcon driver.
: JIG-{USB-ON|USB-OFF|UART-ON|UART-OFF} -> JIG
: Dock-{Smart|Desk|Audio|Card} -> DOCK
: MHL-TA -> TA

- Use the capital letter for the name of all external connectors.
- Remove the optional print_name() function pointer from struct extcon_dev to
maintain the consistent name of extcon device.

2. Add the new extcon-axp288.c extcon driver.
- The extcon-axp288.c driver support for AXP288 PMIC which has the BC1.2
charger detection capability. So this extcon driver can detect the
EXTCON_SLOW_CHARGER, EXTCON_CHARGE_DOWNSTREAM and EXTCON_FAST_CHARGER.

3. Update the extcon-arizona.c driver.
- Add support for selective detection mode when headphone detection.
- Apply HP clamps for WM8280

4. Clean-up the extcon core and drivers.
- Add manufactor information of each extcon device.
- Fix checkpatch warning and minor coding style on extcon.c.c
- Fix build break if GPIOLIB is not enabled on extcon-usb-gpiio.c.
- Set the direction of gpio when calling devm_gpiod_get() on extcon-usb-gpio.c

Documentation/devicetree/bindings/mfd/arizona.txt

@@ -62,6 +62,12 @@ Optional properties:
     present, the number of values should be less than or equal to the
     number of inputs, unspecified inputs will use the chip default.
 
+  - wlf,hpdet-channel : Headphone detection channel.
+    ARIZONA_ACCDET_MODE_HPL or 1 - Headphone detect mode is set to HPDETL
+    ARIZONA_ACCDET_MODE_HPR or 2 - Headphone detect mode is set to HPDETR
+    If this node is not mentioned or if the value is unknown, then
+    headphone detection mode is set to HPDETL.
+
   - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if
     they are being externally supplied. As covered in
     Documentation/devicetree/bindings/regulator/regulator.txt

drivers/extcon/Kconfig

@@ -28,15 +28,22 @@ config EXTCON_ARIZONA
 	  with Wolfson Arizona devices. These are audio CODECs with
 	  advanced audio accessory detection support.
 
+config EXTCON_AXP288
+	tristate "X-Power AXP288 EXTCON support"
+	depends on MFD_AXP20X && USB_PHY
+	help
+	  Say Y here to enable support for USB peripheral detection
+	  and USB MUX switching by X-Power AXP288 PMIC.
+
 config EXTCON_GPIO
 	tristate "GPIO extcon support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to enable GPIO based extcon support. Note that GPIO
 	  extcon supports single state per extcon instance.
 
 config EXTCON_MAX14577
-	tristate "MAX14577/77836 EXTCON Support"
+	tristate "Maxim MAX14577/77836 EXTCON Support"
 	depends on MFD_MAX14577
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -46,7 +53,7 @@ config EXTCON_MAX14577
 	  detector and switch.
 
 config EXTCON_MAX77693
-	tristate "MAX77693 EXTCON Support"
+	tristate "Maxim MAX77693 EXTCON Support"
 	depends on MFD_MAX77693 && INPUT
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -56,7 +63,7 @@ config EXTCON_MAX77693
 	  detector and switch.
 
 config EXTCON_MAX77843
-	tristate "MAX77843 EXTCON Support"
+	tristate "Maxim MAX77843 EXTCON Support"
 	depends on MFD_MAX77843
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -66,7 +73,7 @@ config EXTCON_MAX77843
 	  detector add switch.
 
 config EXTCON_MAX8997
-	tristate "MAX8997 EXTCON Support"
+	tristate "Maxim MAX8997 EXTCON Support"
 	depends on MFD_MAX8997 && IRQ_DOMAIN
 	help
 	  If you say yes here you get support for the MUIC device of
@@ -81,7 +88,7 @@ config EXTCON_PALMAS
 	  detection by palmas usb.
 
 config EXTCON_RT8973A
-	tristate "RT8973A EXTCON support"
+	tristate "Richtek RT8973A EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -93,7 +100,7 @@ config EXTCON_RT8973A
 	  from abnormal high input voltage (up to 28V).
 
 config EXTCON_SM5502
-	tristate "SM5502 EXTCON support"
+	tristate "Silicon Mitus SM5502 EXTCON support"
 	depends on I2C
 	select IRQ_DOMAIN
 	select REGMAP_I2C
@@ -105,9 +112,9 @@ config EXTCON_SM5502
 
 config EXTCON_USB_GPIO
 	tristate "USB GPIO extcon support"
-	depends on GPIOLIB
+	depends on GPIOLIB || COMPILE_TEST
 	help
 	  Say Y here to enable GPIO based USB cable detection extcon support.
 	  Used typically if GPIO is used for USB ID pin detection.
 
-endif # MULTISTATE_SWITCH
+endif

drivers/extcon/Makefile

@@ -5,6 +5,7 @@
 obj-$(CONFIG_EXTCON)		+= extcon.o
 obj-$(CONFIG_EXTCON_ADC_JACK)	+= extcon-adc-jack.o
 obj-$(CONFIG_EXTCON_ARIZONA)	+= extcon-arizona.o
+obj-$(CONFIG_EXTCON_AXP288)	+= extcon-axp288.o
 obj-$(CONFIG_EXTCON_GPIO)	+= extcon-gpio.o
 obj-$(CONFIG_EXTCON_MAX14577)	+= extcon-max14577.o
 obj-$(CONFIG_EXTCON_MAX77693)	+= extcon-max77693.o

drivers/extcon/extcon-adc-jack.c

@@ -29,7 +29,6 @@
  * struct adc_jack_data - internal data for adc_jack device driver
  * @edev:		extcon device.
  * @cable_names:	list of supported cables.
- * @num_cables:		size of cable_names.
  * @adc_conditions:	list of adc value conditions.
  * @num_conditions:	size of adc_conditions.
  * @irq:		irq number of attach/detach event (0 if not exist).
@@ -42,7 +41,6 @@ struct adc_jack_data {
 	struct extcon_dev *edev;
 
 	const char **cable_names;
-	int num_cables;
 	struct adc_jack_cond *adc_conditions;
 	int num_conditions;
 
@@ -112,17 +110,6 @@ static int adc_jack_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	data->edev->name = pdata->name;
-
-	/* Check the length of array and set num_cables */
-	for (i = 0; data->edev->supported_cable[i]; i++)
-		;
-	if (i == 0 || i > SUPPORTED_CABLE_MAX) {
-		dev_err(&pdev->dev, "error: pdata->cable_names size = %d\n",
-				i - 1);
-		return -EINVAL;
-	}
-	data->num_cables = i;
 
 	if (!pdata->adc_conditions ||
 			!pdata->adc_conditions[0].state) {

drivers/extcon/extcon-arizona.c

@@ -32,13 +32,10 @@
 #include <linux/mfd/arizona/core.h>
 #include <linux/mfd/arizona/pdata.h>
 #include <linux/mfd/arizona/registers.h>
+#include <dt-bindings/mfd/arizona.h>
 
 #define ARIZONA_MAX_MICD_RANGE 8
 
-#define ARIZONA_ACCDET_MODE_MIC 0
-#define ARIZONA_ACCDET_MODE_HPL 1
-#define ARIZONA_ACCDET_MODE_HPR 2
-
 #define ARIZONA_MICD_CLAMP_MODE_JDL      0x4
 #define ARIZONA_MICD_CLAMP_MODE_JDH      0x5
 #define ARIZONA_MICD_CLAMP_MODE_JDL_GP5H 0x9
@@ -94,7 +91,7 @@ struct arizona_extcon_info {
 	bool detecting;
 	int jack_flips;
 
-	int hpdet_ip;
+	int hpdet_ip_version;
 
 	struct extcon_dev *edev;
 };
@@ -121,17 +118,12 @@ static const int arizona_micd_levels[] = {
 	1257,
 };
 
-#define ARIZONA_CABLE_MECHANICAL 0
-#define ARIZONA_CABLE_MICROPHONE 1
-#define ARIZONA_CABLE_HEADPHONE  2
-#define ARIZONA_CABLE_LINEOUT    3
-
-static const char *arizona_cable[] = {
-	"Mechanical",
-	"Microphone",
-	"Headphone",
-	"Line-out",
-	NULL,
+static const enum extcon arizona_cable[] = {
+	EXTCON_MECHANICAL,
+	EXTCON_MICROPHONE,
+	EXTCON_HEADPHONE,
+	EXTCON_LINE_OUT,
+	EXTCON_NONE,
 };
 
 static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info);
@@ -145,6 +137,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 
 	switch (arizona->type) {
 	case WM5110:
+	case WM8280:
 		mask = ARIZONA_HP1L_SHRTO | ARIZONA_HP1L_FLWR |
 		       ARIZONA_HP1L_SHRTI;
 		if (clamp)
@@ -380,7 +373,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 		return ret;
 	}
 
-	switch (info->hpdet_ip) {
+	switch (info->hpdet_ip_version) {
 	case 0:
 		if (!(val & ARIZONA_HP_DONE)) {
 			dev_err(arizona->dev, "HPDET did not complete: %x\n",
@@ -441,7 +434,7 @@ static int arizona_hpdet_read(struct arizona_extcon_info *info)
 
 	default:
 		dev_warn(arizona->dev, "Unknown HPDET IP revision %d\n",
-			 info->hpdet_ip);
+			 info->hpdet_ip_version);
 	case 2:
 		if (!(val & ARIZONA_HP_DONE_B)) {
 			dev_err(arizona->dev, "HPDET did not complete: %x\n",
@@ -559,7 +552,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	struct arizona_extcon_info *info = data;
 	struct arizona *arizona = info->arizona;
 	int id_gpio = arizona->pdata.hpdet_id_gpio;
-	int report = ARIZONA_CABLE_HEADPHONE;
+	enum extcon report = EXTCON_HEADPHONE;
 	int ret, reading;
 	bool mic = false;
 
@@ -573,7 +566,7 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 	}
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 			ret);
@@ -604,9 +597,9 @@ static irqreturn_t arizona_hpdet_irq(int irq, void *data)
 
 	/* Report high impedence cables as line outputs */
 	if (reading >= 5000)
-		report = ARIZONA_CABLE_LINEOUT;
+		report = EXTCON_LINE_OUT;
 	else
-		report = ARIZONA_CABLE_HEADPHONE;
+		report = EXTCON_HEADPHONE;
 
 	ret = extcon_set_cable_state_(info->edev, report, true);
 	if (ret != 0)
@@ -670,9 +663,9 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
 	ret = regmap_update_bits(arizona->regmap,
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_MODE_MASK,
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -691,8 +684,7 @@ static void arizona_identify_headphone(struct arizona_extcon_info *info)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev,
-				      ARIZONA_CABLE_HEADPHONE, true);
+	ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -722,9 +714,9 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 				 ARIZONA_ACCESSORY_DETECT_MODE_1,
 				 ARIZONA_ACCDET_SRC | ARIZONA_ACCDET_MODE_MASK,
 				 info->micd_modes[0].src |
-				 ARIZONA_ACCDET_MODE_HPL);
+				 arizona->pdata.hpdet_channel);
 	if (ret != 0) {
-		dev_err(arizona->dev, "Failed to set HPDETL mode: %d\n", ret);
+		dev_err(arizona->dev, "Failed to set HPDET mode: %d\n", ret);
 		goto err;
 	}
 
@@ -749,8 +741,7 @@ static void arizona_start_hpdet_acc_id(struct arizona_extcon_info *info)
 			   ARIZONA_ACCDET_MODE_MASK, ARIZONA_ACCDET_MODE_MIC);
 
 	/* Just report headphone */
-	ret = extcon_set_cable_state_(info->edev,
-				      ARIZONA_CABLE_HEADPHONE, true);
+	ret = extcon_set_cable_state_(info->edev, EXTCON_HEADPHONE, true);
 	if (ret != 0)
 		dev_err(arizona->dev, "Failed to report headphone: %d\n", ret);
 
@@ -789,7 +780,7 @@ static void arizona_micd_detect(struct work_struct *work)
 	mutex_lock(&info->lock);
 
 	/* If the cable was removed while measuring ignore the result */
-	ret = extcon_get_cable_state_(info->edev, ARIZONA_CABLE_MECHANICAL);
+	ret = extcon_get_cable_state_(info->edev, EXTCON_MECHANICAL);
 	if (ret < 0) {
 		dev_err(arizona->dev, "Failed to check cable state: %d\n",
 				ret);
@@ -838,8 +829,7 @@ static void arizona_micd_detect(struct work_struct *work)
 		arizona_identify_headphone(info);
 
 		ret = extcon_set_cable_state_(info->edev,
-					      ARIZONA_CABLE_MICROPHONE, true);
-
+					      EXTCON_MICROPHONE, true);
 		if (ret != 0)
 			dev_err(arizona->dev, "Headset report failed: %d\n",
 				ret);
@@ -1030,7 +1020,7 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 	if (info->last_jackdet == present) {
 		dev_dbg(arizona->dev, "Detected jack\n");
 		ret = extcon_set_cable_state_(info->edev,
-					      ARIZONA_CABLE_MECHANICAL, true);
+					      EXTCON_MECHANICAL, true);
 
 		if (ret != 0)
 			dev_err(arizona->dev, "Mechanical report failed: %d\n",
@@ -1120,6 +1110,26 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,
 	regmap_update_bits(arizona->regmap, reg, mask, level);
 }
 
+static int arizona_extcon_of_get_pdata(struct arizona *arizona)
+{
+	struct arizona_pdata *pdata = &arizona->pdata;
+	unsigned int val = ARIZONA_ACCDET_MODE_HPL;
+
+	of_property_read_u32(arizona->dev->of_node, "wlf,hpdet-channel", &val);
+	switch (val) {
+	case ARIZONA_ACCDET_MODE_HPL:
+	case ARIZONA_ACCDET_MODE_HPR:
+		pdata->hpdet_channel = val;
+		break;
+	default:
+		dev_err(arizona->dev,
+			"Wrong wlf,hpdet-channel DT value %d\n", val);
+		pdata->hpdet_channel = ARIZONA_ACCDET_MODE_HPL;
+	}
+
+	return 0;
+}
+
 static int arizona_extcon_probe(struct platform_device *pdev)
 {
 	struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
@@ -1137,6 +1147,11 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 	if (!info)
 		return -ENOMEM;
 
+	if (IS_ENABLED(CONFIG_OF)) {
+		if (!dev_get_platdata(arizona->dev))
+			arizona_extcon_of_get_pdata(arizona);
+	}
+
 	info->micvdd = devm_regulator_get(&pdev->dev, "MICVDD");
 	if (IS_ERR(info->micvdd)) {
 		ret = PTR_ERR(info->micvdd);
@@ -1161,7 +1176,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			break;
 		default:
 			info->micd_clamp = true;
-			info->hpdet_ip = 1;
+			info->hpdet_ip_version = 1;
 			break;
 		}
 		break;
@@ -1172,7 +1187,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 			break;
 		default:
 			info->micd_clamp = true;
-			info->hpdet_ip = 2;
+			info->hpdet_ip_version = 2;
 			break;
 		}
 		break;
@@ -1185,7 +1200,6 @@ static int arizona_extcon_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	info->edev->name = "Headset Jack";
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret < 0) {

drivers/extcon/extcon-gpio.c

@@ -104,7 +104,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	extcon_data->edev->name = pdata->name;
 
 	extcon_data->gpio = pdata->gpio;
 	extcon_data->gpio_active_low = pdata->gpio_active_low;

drivers/extcon/extcon-max14577.c

@@ -148,33 +148,14 @@ enum max14577_muic_acc_type {
 	MAX14577_MUIC_ADC_OPEN,
 };
 
-/* max14577 MUIC device support below list of accessories(external connector) */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max14577_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-
-	NULL,
+static const enum extcon max14577_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /*
@@ -348,7 +329,6 @@ static int max14577_muic_get_cable_type(struct max14577_muic_info *info,
 static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CTRL1_SW_OPEN;
 
@@ -358,18 +338,12 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 
 	switch (cable_type) {
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CTRL1_SW_USB;
-		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CTRL1_SW_USB;
 		break;
 	case MAX14577_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
 		path = CTRL1_SW_UART;
 		break;
 	default:
@@ -382,7 +356,7 @@ static int max14577_muic_jig_handler(struct max14577_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -479,20 +453,22 @@ static int max14577_muic_chg_handler(struct max14577_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				"Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_SPECIAL_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX14577_CHARGER_TYPE_NONE:
 	case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
@@ -742,8 +718,6 @@ static int max14577_muic_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	info->edev->name = dev_name(&pdev->dev);
-
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register extcon device\n");

drivers/extcon/extcon-max77693.c

@@ -200,44 +200,17 @@ enum max77693_muic_acc_type {
 /*
  * MAX77693 MUIC device support below list of accessories(external connector)
  */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_MHL,
-	EXTCON_CABLE_MHL_TA,
-	EXTCON_CABLE_JIG_USB_ON,
-	EXTCON_CABLE_JIG_USB_OFF,
-	EXTCON_CABLE_JIG_UART_OFF,
-	EXTCON_CABLE_JIG_UART_ON,
-	EXTCON_CABLE_DOCK_SMART,
-	EXTCON_CABLE_DOCK_DESK,
-	EXTCON_CABLE_DOCK_AUDIO,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max77693_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_MHL]			= "MHL",
-	[EXTCON_CABLE_MHL_TA]			= "MHL-TA",
-	[EXTCON_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-	[EXTCON_CABLE_DOCK_SMART]		= "Dock-Smart",
-	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
-	[EXTCON_CABLE_DOCK_AUDIO]		= "Dock-Audio",
-
-	NULL,
+static const enum extcon max77693_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_MHL,
+	EXTCON_JIG,
+	EXTCON_DOCK,
+	EXTCON_NONE,
 };
 
 /*
@@ -484,7 +457,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	int ret = 0;
 	int vbvolt;
 	bool cable_attached;
-	char dock_name[CABLE_NAME_MAX];
+	enum extcon dock_id;
 
 	dev_info(info->dev,
 		"external connector is %s (adc:0x%02x)\n",
@@ -507,15 +480,15 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		}
 
 		/*
-		 * Notify Dock-Smart/MHL state.
-		 * - Dock-Smart device include three type of cable which
+		 * Notify Dock/MHL state.
+		 * - Dock device include three type of cable which
 		 * are HDMI, USB for mouse/keyboard and micro-usb port
-		 * for USB/TA cable. Dock-Smart device need always exteranl
-		 * power supply(USB/TA cable through micro-usb cable). Dock-
-		 * Smart device support screen output of target to separate
+		 * for USB/TA cable. Dock device need always exteranl
+		 * power supply(USB/TA cable through micro-usb cable). Dock
+		 * device support screen output of target to separate
 		 * monitor and mouse/keyboard for desktop mode.
 		 *
-		 * Features of 'USB/TA cable with Dock-Smart device'
+		 * Features of 'USB/TA cable with Dock device'
 		 * - Support MHL
 		 * - Support external output feature of audio
 		 * - Support charging through micro-usb port without data
@@ -529,16 +502,16 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "Dock-Smart", attached);
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		goto out;
 	case MAX77693_MUIC_ADC_AUDIO_MODE_REMOTE:	/* Dock-Desk */
-		strcpy(dock_name, "Dock-Desk");
+		dock_id = EXTCON_DOCK;
 		break;
 	case MAX77693_MUIC_ADC_AV_CABLE_NOLOAD:		/* Dock-Audio */
-		strcpy(dock_name, "Dock-Audio");
+		dock_id = EXTCON_DOCK;
 		if (!attached)
-			extcon_set_cable_state(info->edev, "USB", false);
+			extcon_set_cable_state_(info->edev, EXTCON_USB, false);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -550,7 +523,7 @@ static int max77693_muic_dock_handler(struct max77693_muic_info *info,
 	ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 	if (ret < 0)
 		return ret;
-	extcon_set_cable_state(info->edev, dock_name, attached);
+	extcon_set_cable_state_(info->edev, dock_id, attached);
 
 out:
 	return 0;
@@ -615,20 +588,19 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 		ret = max77693_muic_set_path(info, CONTROL1_SW_USB, attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77693_MUIC_GND_AV_CABLE_LOAD:
 		/* Audio Video Cable with load, PATH:AUDIO */
 		ret = max77693_muic_set_path(info, CONTROL1_SW_AUDIO, attached);
 		if (ret < 0)
 			return ret;
-		extcon_set_cable_state(info->edev,
-				"Audio-video-load", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX77693_MUIC_GND_MHL:
 	case MAX77693_MUIC_GND_MHL_VB:
 		/* MHL or MHL with USB/TA cable */
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s cable of gnd type\n",
@@ -642,7 +614,6 @@ static int max77693_muic_adc_ground_handler(struct max77693_muic_info *info)
 static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 		int cable_type, bool attached)
 {
-	char cable_name[32];
 	int ret = 0;
 	u8 path = CONTROL1_SW_OPEN;
 
@@ -652,23 +623,13 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 
 	switch (cable_type) {
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_OFF:	/* ADC_JIG_USB_OFF */
-		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-OFF");
-		path = CONTROL1_SW_USB;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_USB_ON:	/* ADC_JIG_USB_ON */
 		/* PATH:AP_USB */
-		strcpy(cable_name, "JIG-USB-ON");
 		path = CONTROL1_SW_USB;
 		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_OFF:	/* ADC_JIG_UART_OFF */
-		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-OFF");
-		path = CONTROL1_SW_UART;
-		break;
 	case MAX77693_MUIC_ADC_FACTORY_MODE_UART_ON:	/* ADC_JIG_UART_ON */
 		/* PATH:AP_UART */
-		strcpy(cable_name, "JIG-UART-ON");
 		path = CONTROL1_SW_UART;
 		break;
 	default:
@@ -681,7 +642,7 @@ static int max77693_muic_jig_handler(struct max77693_muic_info *info,
 	if (ret < 0)
 		return ret;
 
-	extcon_set_cable_state(info->edev, cable_name, attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -823,22 +784,22 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 		case MAX77693_MUIC_GND_MHL:
 		case MAX77693_MUIC_GND_MHL_VB:
 			/*
-			 * MHL cable with MHL-TA(USB/TA) cable
+			 * MHL cable with USB/TA cable
 			 * - MHL cable include two port(HDMI line and separate
 			 * micro-usb port. When the target connect MHL cable,
-			 * extcon driver check whether MHL-TA(USB/TA) cable is
-			 * connected. If MHL-TA cable is connected, extcon
+			 * extcon driver check whether USB/TA cable is
+			 * connected. If USB/TA cable is connected, extcon
 			 * driver notify state to notifiee for charging battery.
 			 *
-			 * Features of 'MHL-TA(USB/TA) with MHL cable'
+			 * Features of 'USB/TA with MHL cable'
 			 * - Support MHL
 			 * - Support charging through micro-usb port without
 			 *   data connection
 			 */
-			extcon_set_cable_state(info->edev, "MHL-TA", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev,
-						      "MHL", cable_attached);
+				extcon_set_cable_state_(info->edev, EXTCON_MHL,
+							cable_attached);
 			break;
 		}
 
@@ -861,11 +822,12 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			 * - Support charging through micro-usb port without
 			 *   data connection.
 			 */
-			extcon_set_cable_state(info->edev, "USB", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_USB,
+						attached);
 
 			if (!cable_attached)
-				extcon_set_cable_state(info->edev, "Dock-Audio",
-						      cable_attached);
+				extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+							cable_attached);
 			break;
 		case MAX77693_MUIC_ADC_RESERVED_ACC_3:		/* Dock-Smart */
 			/*
@@ -893,10 +855,10 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state(info->edev, "Dock-Smart",
-					      attached);
-			extcon_set_cable_state(info->edev, "MHL", attached);
-
+			extcon_set_cable_state_(info->edev, EXTCON_DOCK,
+						attached);
+			extcon_set_cable_state_(info->edev, EXTCON_MHL,
+						attached);
 			break;
 		}
 
@@ -929,23 +891,26 @@ static int max77693_muic_chg_handler(struct max77693_muic_info *info)
 			if (ret < 0)
 				return ret;
 
-			extcon_set_cable_state(info->edev, "USB", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_USB,
+						attached);
 			break;
 		case MAX77693_CHARGER_TYPE_DEDICATED_CHG:
 			/* Only TA cable */
-			extcon_set_cable_state(info->edev, "TA", attached);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 			break;
 		}
 		break;
 	case MAX77693_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				"Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_APPLE_1A_2A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX77693_CHARGER_TYPE_DEAD_BATTERY:
 		break;
@@ -1182,7 +1147,6 @@ static int max77693_muic_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = DEV_NAME;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {

drivers/extcon/extcon-max77843.c

@@ -118,36 +118,16 @@ enum max77843_muic_charger_type {
 	MAX77843_MUIC_CHG_GND,
 };
 
-enum {
-	MAX77843_CABLE_USB = 0,
-	MAX77843_CABLE_USB_HOST,
-	MAX77843_CABLE_TA,
-	MAX77843_CABLE_CHARGE_DOWNSTREAM,
-	MAX77843_CABLE_FAST_CHARGER,
-	MAX77843_CABLE_SLOW_CHARGER,
-	MAX77843_CABLE_MHL,
-	MAX77843_CABLE_MHL_TA,
-	MAX77843_CABLE_JIG_USB_ON,
-	MAX77843_CABLE_JIG_USB_OFF,
-	MAX77843_CABLE_JIG_UART_ON,
-	MAX77843_CABLE_JIG_UART_OFF,
-
-	MAX77843_CABLE_NUM,
-};
-
-static const char *max77843_extcon_cable[] = {
-	[MAX77843_CABLE_USB]			= "USB",
-	[MAX77843_CABLE_USB_HOST]		= "USB-HOST",
-	[MAX77843_CABLE_TA]			= "TA",
-	[MAX77843_CABLE_CHARGE_DOWNSTREAM]	= "CHARGER-DOWNSTREAM",
-	[MAX77843_CABLE_FAST_CHARGER]		= "FAST-CHARGER",
-	[MAX77843_CABLE_SLOW_CHARGER]		= "SLOW-CHARGER",
-	[MAX77843_CABLE_MHL]			= "MHL",
-	[MAX77843_CABLE_MHL_TA]			= "MHL-TA",
-	[MAX77843_CABLE_JIG_USB_ON]		= "JIG-USB-ON",
-	[MAX77843_CABLE_JIG_USB_OFF]		= "JIG-USB-OFF",
-	[MAX77843_CABLE_JIG_UART_ON]		= "JIG-UART-ON",
-	[MAX77843_CABLE_JIG_UART_OFF]		= "JIG-UART-OFF",
+static const enum extcon max77843_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_MHL,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 struct max77843_muic_irq {
@@ -362,7 +342,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB-HOST", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX77843_MUIC_GND_MHL_VB:
 	case MAX77843_MUIC_GND_MHL:
@@ -370,7 +350,7 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n",
@@ -385,36 +365,29 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info,
 		int cable_type, bool attached)
 {
 	int ret;
+	u8 path = CONTROL1_SW_OPEN;
 
 	dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n",
 			attached ? "attached" : "detached", cable_type);
 
 	switch (cable_type) {
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-OFF", attached);
-		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_USB, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-USB-ON", attached);
+		path = CONTROL1_SW_USB;
 		break;
 	case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_UART, attached);
-		if (ret < 0)
-			return ret;
-		extcon_set_cable_state(info->edev, "JIG-UART-OFF", attached);
+		path = CONTROL1_SW_UART;
 		break;
 	default:
-		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
-		if (ret < 0)
-			return ret;
-		break;
+		return -EINVAL;
 	}
 
+	ret = max77843_muic_set_path(info, path, attached);
+	if (ret < 0)
+		return ret;
+
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
+
 	return 0;
 }
 
@@ -505,36 +478,38 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	case MAX77843_MUIC_CHG_DOWNSTREAM:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev,
-				"CHARGER-DOWNSTREAM", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_DEDICATED:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_500MA:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "SLOW-CHAREGER", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_SPECIAL_1A:
 		ret = max77843_muic_set_path(info, CONTROL1_SW_OPEN, attached);
 		if (ret < 0)
 			return ret;
 
-		extcon_set_cable_state(info->edev, "FAST-CHARGER", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	case MAX77843_MUIC_CHG_GND:
 		gnd_type = max77843_muic_get_cable_type(info,
@@ -542,9 +517,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info)
 
 		/* Charger cable on MHL accessory is attach or detach */
 		if (gnd_type == MAX77843_MUIC_GND_MHL_VB)
-			extcon_set_cable_state(info->edev, "MHL-TA", true);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, true);
 		else if (gnd_type == MAX77843_MUIC_GND_MHL)
-			extcon_set_cable_state(info->edev, "MHL-TA", false);
+			extcon_set_cable_state_(info->edev, EXTCON_TA, false);
 		break;
 	case MAX77843_MUIC_CHG_NONE:
 		break;

drivers/extcon/extcon-max8997.c

@@ -145,34 +145,17 @@ struct max8997_muic_info {
 	int path_uart;
 };
 
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_FAST_CHARGER,
-	EXTCON_CABLE_SLOW_CHARGER,
-	EXTCON_CABLE_CHARGE_DOWNSTREAM,
-	EXTCON_CABLE_MHL,
-	EXTCON_CABLE_DOCK_DESK,
-	EXTCON_CABLE_DOCK_CARD,
-	EXTCON_CABLE_JIG,
-
-	_EXTCON_CABLE_NUM,
-};
-
-static const char *max8997_extcon_cable[] = {
-	[EXTCON_CABLE_USB]			= "USB",
-	[EXTCON_CABLE_USB_HOST]			= "USB-Host",
-	[EXTCON_CABLE_TA]			= "TA",
-	[EXTCON_CABLE_FAST_CHARGER]		= "Fast-charger",
-	[EXTCON_CABLE_SLOW_CHARGER]		= "Slow-charger",
-	[EXTCON_CABLE_CHARGE_DOWNSTREAM]	= "Charge-downstream",
-	[EXTCON_CABLE_MHL]			= "MHL",
-	[EXTCON_CABLE_DOCK_DESK]		= "Dock-Desk",
-	[EXTCON_CABLE_DOCK_CARD]		= "Dock-Card",
-	[EXTCON_CABLE_JIG]			= "JIG",
-
-	NULL,
+static const enum extcon max8997_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_FAST_CHARGER,
+	EXTCON_SLOW_CHARGER,
+	EXTCON_CHARGE_DOWNSTREAM,
+	EXTCON_MHL,
+	EXTCON_DOCK,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /*
@@ -347,10 +330,10 @@ static int max8997_muic_handle_usb(struct max8997_muic_info *info,
 
 	switch (usb_type) {
 	case MAX8997_USB_HOST:
-		extcon_set_cable_state(info->edev, "USB-Host", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, attached);
 		break;
 	case MAX8997_USB_DEVICE:
-		extcon_set_cable_state(info->edev, "USB", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s usb cable\n",
@@ -374,10 +357,8 @@ static int max8997_muic_handle_dock(struct max8997_muic_info *info,
 
 	switch (cable_type) {
 	case MAX8997_MUIC_ADC_AV_CABLE_NOLOAD:
-		extcon_set_cable_state(info->edev, "Dock-desk", attached);
-		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_UART_ON:
-		extcon_set_cable_state(info->edev, "Dock-card", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_DOCK, attached);
 		break;
 	default:
 		dev_err(info->dev, "failed to detect %s dock device\n",
@@ -400,7 +381,7 @@ static int max8997_muic_handle_jig_uart(struct max8997_muic_info *info,
 		return ret;
 	}
 
-	extcon_set_cable_state(info->edev, "JIG", attached);
+	extcon_set_cable_state_(info->edev, EXTCON_JIG, attached);
 
 	return 0;
 }
@@ -422,7 +403,7 @@ static int max8997_muic_adc_handler(struct max8997_muic_info *info)
 			return ret;
 		break;
 	case MAX8997_MUIC_ADC_MHL:
-		extcon_set_cable_state(info->edev, "MHL", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_MHL, attached);
 		break;
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_OFF:
 	case MAX8997_MUIC_ADC_FACTORY_MODE_USB_ON:
@@ -505,17 +486,19 @@ static int max8997_muic_chg_handler(struct max8997_muic_info *info)
 		}
 		break;
 	case MAX8997_CHARGER_TYPE_DOWNSTREAM_PORT:
-		extcon_set_cable_state(info->edev,
-				      "Charge-downstream", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_CHARGE_DOWNSTREAM,
+					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_DEDICATED_CHG:
-		extcon_set_cable_state(info->edev, "TA", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_TA, attached);
 		break;
 	case MAX8997_CHARGER_TYPE_500MA:
-		extcon_set_cable_state(info->edev, "Slow-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_SLOW_CHARGER,
+					attached);
 		break;
 	case MAX8997_CHARGER_TYPE_1A:
-		extcon_set_cable_state(info->edev, "Fast-charger", attached);
+		extcon_set_cable_state_(info->edev, EXTCON_FAST_CHARGER,
+					attached);
 		break;
 	default:
 		dev_err(info->dev,
@@ -700,7 +683,6 @@ static int max8997_muic_probe(struct platform_device *pdev)
 		ret = -ENOMEM;
 		goto err_irq;
 	}
-	info->edev->name = DEV_NAME;
 
 	ret = devm_extcon_dev_register(&pdev->dev, info->edev);
 	if (ret) {

drivers/extcon/extcon-palmas.c

@@ -29,10 +29,10 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 
-static const char *palmas_extcon_cable[] = {
-	[0] = "USB",
-	[1] = "USB-HOST",
-	NULL,
+static const enum extcon palmas_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
 };
 
 static const int mutually_exclusive[] = {0x3, 0x0};
@@ -49,6 +49,7 @@ static void palmas_usb_wakeup(struct palmas *palmas, int enable)
 static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 {
 	struct palmas_usb *palmas_usb = _palmas_usb;
+	struct extcon_dev *edev = palmas_usb->edev;
 	unsigned int vbus_line_state;
 
 	palmas_read(palmas_usb->palmas, PALMAS_INTERRUPT_BASE,
@@ -57,7 +58,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	if (vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS) {
 		if (palmas_usb->linkstat != PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_VBUS;
-			extcon_set_cable_state(palmas_usb->edev, "USB", true);
+			extcon_set_cable_state_(edev, EXTCON_USB, true);
 			dev_info(palmas_usb->dev, "USB cable is attached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -66,7 +67,7 @@ static irqreturn_t palmas_vbus_irq_handler(int irq, void *_palmas_usb)
 	} else if (!(vbus_line_state & PALMAS_INT3_LINE_STATE_VBUS)) {
 		if (palmas_usb->linkstat == PALMAS_USB_STATE_VBUS) {
 			palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-			extcon_set_cable_state(palmas_usb->edev, "USB", false);
+			extcon_set_cable_state_(edev, EXTCON_USB, false);
 			dev_info(palmas_usb->dev, "USB cable is detached\n");
 		} else {
 			dev_dbg(palmas_usb->dev,
@@ -81,6 +82,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 {
 	unsigned int set, id_src;
 	struct palmas_usb *palmas_usb = _palmas_usb;
+	struct extcon_dev *edev = palmas_usb->edev;
 
 	palmas_read(palmas_usb->palmas, PALMAS_USB_OTG_BASE,
 		PALMAS_USB_ID_INT_LATCH_SET, &set);
@@ -93,7 +95,7 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_GND);
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, "USB-HOST cable is attached\n");
 	} else if ((set & PALMAS_USB_ID_INT_SRC_ID_FLOAT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_FLOAT)) {
@@ -101,17 +103,17 @@ static irqreturn_t palmas_id_irq_handler(int irq, void *_palmas_usb)
 			PALMAS_USB_ID_INT_LATCH_CLR,
 			PALMAS_USB_ID_INT_EN_HI_CLR_ID_FLOAT);
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_ID) &&
 				(!(set & PALMAS_USB_ID_INT_SRC_ID_GND))) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_DISCONNECT;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", false);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, false);
 		dev_info(palmas_usb->dev, "USB-HOST cable is detached\n");
 	} else if ((palmas_usb->linkstat == PALMAS_USB_STATE_DISCONNECT) &&
 				(id_src & PALMAS_USB_ID_INT_SRC_ID_GND)) {
 		palmas_usb->linkstat = PALMAS_USB_STATE_ID;
-		extcon_set_cable_state(palmas_usb->edev, "USB-HOST", true);
+		extcon_set_cable_state_(edev, EXTCON_USB_HOST, true);
 		dev_info(palmas_usb->dev, " USB-HOST cable is attached\n");
 	}
 
@@ -193,7 +195,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failed to allocate extcon device\n");
 		return -ENOMEM;
 	}
-	palmas_usb->edev->name = kstrdup(node->name, GFP_KERNEL);
 	palmas_usb->edev->mutually_exclusive = mutually_exclusive;
 
 	status = devm_extcon_dev_register(&pdev->dev, palmas_usb->edev);

drivers/extcon/extcon-rt8973a.c

@@ -90,27 +90,12 @@ static struct reg_data rt8973a_reg_data[] = {
 };
 
 /* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-	EXTCON_CABLE_JIG_OFF_USB,
-	EXTCON_CABLE_JIG_ON_USB,
-	EXTCON_CABLE_JIG_OFF_UART,
-	EXTCON_CABLE_JIG_ON_UART,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *rt8973a_extcon_cable[] = {
-	[EXTCON_CABLE_USB]		= "USB",
-	[EXTCON_CABLE_USB_HOST]		= "USB-Host",
-	[EXTCON_CABLE_TA]		= "TA",
-	[EXTCON_CABLE_JIG_OFF_USB]	= "JIG-USB-OFF",
-	[EXTCON_CABLE_JIG_ON_USB]	= "JIG-USB-ON",
-	[EXTCON_CABLE_JIG_OFF_UART]	= "JIG-UART-OFF",
-	[EXTCON_CABLE_JIG_ON_UART]	= "JIG-UART-ON",
-	NULL,
+static const enum extcon rt8973a_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_JIG,
+	EXTCON_NONE,
 };
 
 /* Define OVP (Over Voltage Protection), OTP (Over Temperature Protection) */
@@ -313,14 +298,11 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 					enum rt8973a_event_type event)
 {
 	static unsigned int prev_cable_type;
-	const char **cable_names = info->edev->supported_cable;
 	unsigned int con_sw = DM_DP_SWITCH_UART;
-	int ret, idx = 0, cable_type;
+	int ret, cable_type;
+	enum extcon id;
 	bool attached = false;
 
-	if (!cable_names)
-		return 0;
-
 	switch (event) {
 	case RT8973A_EVENT_ATTACH:
 		cable_type = rt8973a_muic_get_cable_type(info);
@@ -347,31 +329,25 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 
 	switch (cable_type) {
 	case RT8973A_MUIC_ADC_OTG:
-		idx = EXTCON_CABLE_USB_HOST;
+		id = EXTCON_USB_HOST;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_TA:
-		idx = EXTCON_CABLE_TA;
+		id = EXTCON_TA;
 		con_sw = DM_DP_SWITCH_OPEN;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_USB:
-		idx = EXTCON_CABLE_JIG_OFF_USB;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_USB:
-		idx = EXTCON_CABLE_JIG_ON_USB;
-		con_sw = DM_DP_SWITCH_UART;
+		id = EXTCON_JIG;
+		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_OFF_UART:
-		idx = EXTCON_CABLE_JIG_OFF_UART;
-		con_sw = DM_DP_SWITCH_UART;
-		break;
 	case RT8973A_MUIC_ADC_FACTORY_MODE_BOOT_ON_UART:
-		idx = EXTCON_CABLE_JIG_ON_UART;
+		id = EXTCON_JIG;
 		con_sw = DM_DP_SWITCH_UART;
 		break;
 	case RT8973A_MUIC_ADC_USB:
-		idx = EXTCON_CABLE_USB;
+		id = EXTCON_USB;
 		con_sw = DM_DP_SWITCH_USB;
 		break;
 	case RT8973A_MUIC_ADC_OPEN:
@@ -421,7 +397,7 @@ static int rt8973a_muic_cable_handler(struct rt8973a_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+	extcon_set_cable_state_(info->edev, id, attached);
 
 	return 0;
 }
@@ -643,7 +619,6 @@ static int rt8973a_muic_i2c_probe(struct i2c_client *i2c,
 		dev_err(info->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = np->name;
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(info->dev, info->edev);

drivers/extcon/extcon-sm5502.c

@@ -92,19 +92,11 @@ static struct reg_data sm5502_reg_data[] = {
 };
 
 /* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-	EXTCON_CABLE_TA,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *sm5502_extcon_cable[] = {
-	[EXTCON_CABLE_USB]	= "USB",
-	[EXTCON_CABLE_USB_HOST]	= "USB-Host",
-	[EXTCON_CABLE_TA]	= "TA",
-	NULL,
+static const enum extcon sm5502_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_TA,
+	EXTCON_NONE,
 };
 
 /* Define supported accessory type */
@@ -377,16 +369,12 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 				     bool attached)
 {
 	static unsigned int prev_cable_type = SM5502_MUIC_ADC_GROUND;
-	const char **cable_names = info->edev->supported_cable;
 	unsigned int cable_type = SM5502_MUIC_ADC_GROUND;
 	unsigned int con_sw = DM_DP_SWITCH_OPEN;
 	unsigned int vbus_sw = VBUSIN_SWITCH_OPEN;
-	unsigned int idx = 0;
+	enum extcon id;
 	int ret;
 
-	if (!cable_names)
-		return 0;
-
 	/* Get the type of attached or detached cable */
 	if (attached)
 		cable_type = sm5502_muic_get_cable_type(info);
@@ -396,17 +384,17 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 
 	switch (cable_type) {
 	case SM5502_MUIC_ADC_OPEN_USB:
-		idx	= EXTCON_CABLE_USB;
+		id	= EXTCON_USB;
 		con_sw	= DM_DP_SWITCH_USB;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT_WITH_USB;
 		break;
 	case SM5502_MUIC_ADC_OPEN_TA:
-		idx	= EXTCON_CABLE_TA;
+		id	= EXTCON_TA;
 		con_sw	= DM_DP_SWITCH_OPEN;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
 		break;
 	case SM5502_MUIC_ADC_OPEN_USB_OTG:
-		idx	= EXTCON_CABLE_USB_HOST;
+		id	= EXTCON_USB_HOST;
 		con_sw	= DM_DP_SWITCH_USB;
 		vbus_sw	= VBUSIN_SWITCH_OPEN;
 		break;
@@ -422,7 +410,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		return ret;
 
 	/* Change the state of external accessory */
-	extcon_set_cable_state(info->edev, cable_names[idx], attached);
+	extcon_set_cable_state_(info->edev, id, attached);
 
 	return 0;
 }
@@ -623,7 +611,6 @@ static int sm5022_muic_i2c_probe(struct i2c_client *i2c,
 		dev_err(info->dev, "failed to allocate memory for extcon\n");
 		return -ENOMEM;
 	}
-	info->edev->name = np->name;
 
 	/* Register extcon device */
 	ret = devm_extcon_dev_register(info->dev, info->edev);

drivers/extcon/extcon-usb-gpio.c

@@ -15,6 +15,7 @@
  */
 
 #include <linux/extcon.h>
+#include <linux/gpio/consumer.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -38,18 +39,10 @@ struct usb_extcon_info {
 	struct delayed_work wq_detcable;
 };
 
-/* List of detectable cables */
-enum {
-	EXTCON_CABLE_USB = 0,
-	EXTCON_CABLE_USB_HOST,
-
-	EXTCON_CABLE_END,
-};
-
-static const char *usb_extcon_cable[] = {
-	[EXTCON_CABLE_USB] = "USB",
-	[EXTCON_CABLE_USB_HOST] = "USB-HOST",
-	NULL,
+static const enum extcon usb_extcon_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+	EXTCON_NONE,
 };
 
 static void usb_extcon_detect_cable(struct work_struct *work)
@@ -67,24 +60,16 @@ static void usb_extcon_detect_cable(struct work_struct *work)
 		 * As we don't have event for USB peripheral cable attached,
 		 * we simulate USB peripheral attach here.
 		 */
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB_HOST],
-				       false);
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB],
-				       true);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, false);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, true);
 	} else {
 		/*
 		 * ID = 0 means USB HOST cable attached.
 		 * As we don't have event for USB peripheral cable detached,
 		 * we simulate USB peripheral detach here.
 		 */
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB],
-				       false);
-		extcon_set_cable_state(info->edev,
-				       usb_extcon_cable[EXTCON_CABLE_USB_HOST],
-				       true);
+		extcon_set_cable_state_(info->edev, EXTCON_USB, false);
+		extcon_set_cable_state_(info->edev, EXTCON_USB_HOST, true);
 	}
 }
 
@@ -113,7 +98,7 @@ static int usb_extcon_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	info->dev = dev;
-	info->id_gpiod = devm_gpiod_get(&pdev->dev, "id");
+	info->id_gpiod = devm_gpiod_get(&pdev->dev, "id", GPIOD_IN);
 	if (IS_ERR(info->id_gpiod)) {
 		dev_err(dev, "failed to get ID GPIO\n");
 		return PTR_ERR(info->id_gpiod);

drivers/usb/phy/phy-tahvo.c

@@ -60,10 +60,11 @@ struct tahvo_usb {
 	struct extcon_dev	extcon;
 };
 
-static const char *tahvo_cable[] = {
-	"USB-HOST",
-	"USB",
-	NULL,
+static const enum extcon tahvo_cable[] = {
+	EXTCON_USB,
+	EXTCON_USB_HOST,
+
+	EXTCON_NONE,
 };
 
 static ssize_t vbus_state_show(struct device *device,

include/dt-bindings/mfd/arizona.h

@@ -90,4 +90,8 @@
 #define ARIZONA_INMODE_SE   1
 #define ARIZONA_INMODE_DMIC 2
 
+#define ARIZONA_ACCDET_MODE_MIC 0
+#define ARIZONA_ACCDET_MODE_HPL 1
+#define ARIZONA_ACCDET_MODE_HPR 2
+
 #endif

include/linux/extcon.h

 /*
  *  External connector (extcon) class driver
  *
+ * Copyright (C) 2015 Samsung Electronics
+ * Author: Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * Author: Donggeun Kim <dg77.kim@samsung.com>
  * Author: MyungJoo Ham <myungjoo.ham@samsung.com>
@@ -27,50 +30,41 @@
 #include <linux/notifier.h>
 #include <linux/sysfs.h>
 
-#define SUPPORTED_CABLE_MAX	32
-#define CABLE_NAME_MAX		30
-
-/*
- * The standard cable name is to help support general notifier
- * and notifiee device drivers to share the common names.
- * Please use standard cable names unless your notifier device has
- * a very unique and abnormal cable or
- * the cable type is supposed to be used with only one unique
- * pair of notifier/notifiee devices.
- *
- * Please add any other "standard" cables used with extcon dev.
- *
- * You may add a dot and number to specify version or specification
- * of the specific cable if it is required. (e.g., "Fast-charger.18"
- * and "Fast-charger.10" for 1.8A and 1.0A chargers)
- * However, the notifiee and notifier should be able to handle such
- * string and if the notifiee can negotiate the protocol or identify,
- * you don't need such convention. This convention is helpful when
- * notifier can distinguish but notifiee cannot.
- */
-enum extcon_cable_name {
-	EXTCON_USB = 0,
-	EXTCON_USB_HOST,
-	EXTCON_TA,			/* Travel Adaptor */
-	EXTCON_FAST_CHARGER,
-	EXTCON_SLOW_CHARGER,
-	EXTCON_CHARGE_DOWNSTREAM,	/* Charging an external device */
-	EXTCON_HDMI,
-	EXTCON_MHL,
-	EXTCON_DVI,
-	EXTCON_VGA,
-	EXTCON_DOCK,
-	EXTCON_LINE_IN,
-	EXTCON_LINE_OUT,
-	EXTCON_MIC_IN,
-	EXTCON_HEADPHONE_OUT,
-	EXTCON_SPDIF_IN,
-	EXTCON_SPDIF_OUT,
-	EXTCON_VIDEO_IN,
-	EXTCON_VIDEO_OUT,
-	EXTCON_MECHANICAL,
+enum extcon {
+	EXTCON_NONE		= 0x0,
+
+	/* USB external connector */
+	EXTCON_USB		= 0x1,
+	EXTCON_USB_HOST		= 0x2,
+
+	/* Charger external connector */
+	EXTCON_TA		= 0x10,
+	EXTCON_FAST_CHARGER	= 0x11,
+	EXTCON_SLOW_CHARGER	= 0x12,
+	EXTCON_CHARGE_DOWNSTREAM = 0x13,
+
+	/* Audio/Video external connector */
+	EXTCON_LINE_IN		= 0x20,
+	EXTCON_LINE_OUT		= 0x21,
+	EXTCON_MICROPHONE	= 0x22,
+	EXTCON_HEADPHONE	= 0x23,
+
+	EXTCON_HDMI		= 0x30,
+	EXTCON_MHL		= 0x31,
+	EXTCON_DVI		= 0x32,
+	EXTCON_VGA		= 0x33,
+	EXTCON_SPDIF_IN		= 0x34,
+	EXTCON_SPDIF_OUT	= 0x35,
+	EXTCON_VIDEO_IN		= 0x36,
+	EXTCON_VIDEO_OUT	= 0x37,
+
+	/* Etc external connector */
+	EXTCON_DOCK		= 0x50,
+	EXTCON_JIG		= 0x51,
+	EXTCON_MECHANICAL	= 0x52,
+
+	EXTCON_END,
 };
-extern const char extcon_cable_name[][CABLE_NAME_MAX + 1];
 
 struct extcon_cable;
 
@@ -78,7 +72,7 @@ struct extcon_cable;
  * struct extcon_dev - An extcon device represents one external connector.
  * @name:		The name of this extcon device. Parent device name is
  *			used if NULL.
- * @supported_cable:	Array of supported cable names ending with NULL.
+ * @supported_cable:	Array of supported cable names ending with EXTCON_NONE.
  *			If supported_cable is NULL, cable name related APIs
  *			are disabled.
  * @mutually_exclusive:	Array of mutually exclusive set of cables that cannot
@@ -89,16 +83,14 @@ struct extcon_cable;
  *			be attached simulataneously. {0x7, 0} is equivalent to
  *			{0x3, 0x6, 0x5, 0}. If it is {0xFFFFFFFF, 0}, there
  *			can be no simultaneous connections.
- * @print_name:		An optional callback to override the method to print the
- *			name of the extcon device.
  * @print_state:	An optional callback to override the method to print the
  *			status of the extcon device.
  * @dev:		Device of this extcon.
  * @state:		Attach/detach state of this extcon. Do not provide at
  *			register-time.
  * @nh:			Notifier for the state change events from this extcon
- * @entry:		To support list of extcon devices so that users can search
- *			for extcon devices based on the extcon name.
+ * @entry:		To support list of extcon devices so that users can
+ *			search for extcon devices based on the extcon name.
  * @lock:
  * @max_supported:	Internal value to store the number of cables.
  * @extcon_dev_type:	Device_type struct to provide attribute_groups
@@ -113,16 +105,15 @@ struct extcon_cable;
 struct extcon_dev {
 	/* Optional user initializing data */
 	const char *name;
-	const char **supported_cable;
+	const enum extcon *supported_cable;
 	const u32 *mutually_exclusive;
 
 	/* Optional callbacks to override class functions */
-	ssize_t	(*print_name)(struct extcon_dev *edev, char *buf);
 	ssize_t	(*print_state)(struct extcon_dev *edev, char *buf);
 
 	/* Internal data. Please do not set. */
 	struct device dev;
-	struct raw_notifier_head nh;
+	struct raw_notifier_head *nh;
 	struct list_head entry;
 	int max_supported;
 	spinlock_t lock;	/* could be called by irq handler */
@@ -161,8 +152,6 @@ struct extcon_cable {
 /**
  * struct extcon_specific_cable_nb - An internal data for
  *				     extcon_register_interest().
- * @internal_nb:	A notifier block bridging extcon notifier
- *			and cable notifier.
  * @user_nb:		user provided notifier block for events from
  *			a specific cable.
  * @cable_index:	the target cable.
@@ -170,7 +159,6 @@ struct extcon_cable {
  * @previous_value:	the saved previous event value.
  */
 struct extcon_specific_cable_nb {
-	struct notifier_block internal_nb;
 	struct notifier_block *user_nb;
 	int cable_index;
 	struct extcon_dev *edev;
@@ -194,10 +182,10 @@ extern struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name);
 /*
  * Following APIs control the memory of extcon device.
  */
-extern struct extcon_dev *extcon_dev_allocate(const char **cables);
+extern struct extcon_dev *extcon_dev_allocate(const enum extcon *cable);
 extern void extcon_dev_free(struct extcon_dev *edev);
 extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-						   const char **cables);
+						   const enum extcon *cable);
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /*
@@ -216,13 +204,10 @@ extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
 
 /*
  * get/set_cable_state access each bit of the 32b encoded state value.
- * They are used to access the status of each cable based on the cable_name
- * or cable_index, which is retrieved by extcon_find_cable_index
+ * They are used to access the status of each cable based on the cable_name.
  */
-extern int extcon_find_cable_index(struct extcon_dev *sdev,
-				   const char *cable_name);
-extern int extcon_get_cable_state_(struct extcon_dev *edev, int cable_index);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, int cable_index,
+extern int extcon_get_cable_state_(struct extcon_dev *edev, enum extcon id);
+extern int extcon_set_cable_state_(struct extcon_dev *edev, enum extcon id,
 				   bool cable_state);
 
 extern int extcon_get_cable_state(struct extcon_dev *edev,
@@ -249,16 +234,21 @@ extern int extcon_unregister_interest(struct extcon_specific_cable_nb *nb);
  * we do not recommend to use this for normal 'notifiee' device drivers who
  * want to be notified by a specific external port of the notifier.
  */
-extern int extcon_register_notifier(struct extcon_dev *edev,
+extern int extcon_register_notifier(struct extcon_dev *edev, enum extcon id,
+				    struct notifier_block *nb);
+extern int extcon_unregister_notifier(struct extcon_dev *edev, enum extcon id,
 				    struct notifier_block *nb);
-extern int extcon_unregister_notifier(struct extcon_dev *edev,
-				      struct notifier_block *nb);
 
 /*
  * Following API get the extcon device from devicetree.
  * This function use phandle of devicetree to get extcon device directly.
  */
-extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index);
+extern struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev,
+						     int index);
+
+/* Following API to get information of extcon device */
+extern const char *extcon_get_edev_name(struct extcon_dev *edev);
+
 #else /* CONFIG_EXTCON */
 static inline int extcon_dev_register(struct extcon_dev *edev)
 {
@@ -276,7 +266,7 @@ static inline int devm_extcon_dev_register(struct device *dev,
 static inline void devm_extcon_dev_unregister(struct device *dev,
 					      struct extcon_dev *edev) { }
 
-static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
+static inline struct extcon_dev *extcon_dev_allocate(const enum extcon *cable)
 {
 	return ERR_PTR(-ENOSYS);
 }
@@ -284,7 +274,7 @@ static inline struct extcon_dev *extcon_dev_allocate(const char **cables)
 static inline void extcon_dev_free(struct extcon_dev *edev) { }
 
 static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
-							  const char **cables)
+						const enum extcon *cable)
 {
 	return ERR_PTR(-ENOSYS);
 }
@@ -307,20 +297,14 @@ static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
 	return 0;
 }
 
-static inline int extcon_find_cable_index(struct extcon_dev *edev,
-					  const char *cable_name)
-{
-	return 0;
-}
-
 static inline int extcon_get_cable_state_(struct extcon_dev *edev,
-					  int cable_index)
+					  enum extcon id)
 {
 	return 0;
 }
 
 static inline int extcon_set_cable_state_(struct extcon_dev *edev,
-					  int cable_index, bool cable_state)
+					  enum extcon id, bool cable_state)
 {
 	return 0;
 }
@@ -343,13 +327,15 @@ static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 }
 
 static inline int extcon_register_notifier(struct extcon_dev *edev,
-					   struct notifier_block *nb)
+					enum extcon id,
+					struct notifier_block *nb)
 {
 	return 0;
 }
 
 static inline int extcon_unregister_notifier(struct extcon_dev *edev,
-					     struct notifier_block *nb)
+					enum extcon id,
+					struct notifier_block *nb)
 {
 	return 0;
 }

include/linux/extcon/extcon-adc-jack.h

@@ -44,7 +44,7 @@ struct adc_jack_cond {
  * @consumer_channel:	Unique name to identify the channel on the consumer
  *			side. This typically describes the channels used within
  *			the consumer. E.g. 'battery_voltage'
- * @cable_names:	array of cable names ending with null.
+ * @cable_names:	array of extcon id for supported cables.
  * @adc_contitions:	array of struct adc_jack_cond conditions ending
  *			with .state = 0 entry. This describes how to decode
  *			adc values into extcon state.
@@ -58,8 +58,7 @@ struct adc_jack_pdata {
 	const char *name;
 	const char *consumer_channel;
 
-	/* The last entry should be NULL */
-	const char **cable_names;
+	const enum extcon *cable_names;
 
 	/* The last entry's state should be 0 */
 	struct adc_jack_cond *adc_conditions;

include/linux/mfd/arizona/pdata.h

@@ -121,6 +121,9 @@ struct arizona_pdata {
 	/** GPIO used for mic isolation with HPDET */
 	int hpdet_id_gpio;
 
+	/** Channel to use for headphone detection */
+	unsigned int hpdet_channel;
+
 	/** Extra debounce timeout used during initial mic detection (ms) */
 	int micd_detect_debounce;
 

include/linux/mfd/axp20x.h

@@ -275,4 +275,9 @@ struct axp20x_fg_pdata {
 	int thermistor_curve[MAX_THERM_CURVE_SIZE][2];
 };
 
+struct axp288_extcon_pdata {
+	/* GPIO pin control to switch D+/D- lines b/w PMIC and SOC */
+	struct gpio_desc *gpio_mux_cntl;
+};
+
 #endif /* __LINUX_MFD_AXP20X_H */