ARM: uniphier: dts: add more clocks to Denali NAND controller node

Catch up with the new binding of the Denali IP where three clocks,
"nand", "nand_x", "ecc" are required.

For UniPhier SoCs, the "nand_x" and "ecc" are tied up because they
are both 200MHz.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

arch/arm/boot/dts/uniphier-ld4.dtsi

@@ -347,7 +347,8 @@ nand: nand@68000000 {
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/boot/dts/uniphier-pro4.dtsi

@@ -394,7 +394,8 @@ nand: nand@68000000 {
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/boot/dts/uniphier-pro5.dtsi

@@ -439,7 +439,8 @@ nand: nand@68000000 {
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/boot/dts/uniphier-pxs2.dtsi

@@ -531,7 +531,8 @@ nand: nand@68000000 {
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};

arch/arm/boot/dts/uniphier-sld8.dtsi

@@ -351,7 +351,8 @@ nand: nand@68000000 {
 			interrupts = <0 65 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_nand2cs>;
-			clocks = <&sys_clk 2>;
+			clock-names = "nand", "nand_x", "ecc";
+			clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
 			resets = <&sys_rst 2>;
 		};
 	};