Commit 00a0b1d5 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Felipe Balbi

usb: musb: omap: Add device tree support for omap musb glue

Added device tree support for omap musb driver and updated the
Documentation with device tree binding information.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 5ec40590
OMAP GLUE
OMAP MUSB GLUE
- compatible : Should be "ti,omap4-musb" or "ti,omap3-musb"
- ti,hwmods : must be "usb_otg_hs"
- multipoint : Should be "1" indicating the musb controller supports
multipoint. This is a MUSB configuration-specific setting.
- num_eps : Specifies the number of endpoints. This is also a
MUSB configuration-specific setting. Should be set to "16"
- ram_bits : Specifies the ram address size. Should be set to "12"
- interface_type : This is a board specific setting to describe the type of
interface between the controller and the phy. It should be "0" or "1"
specifying ULPI and UTMI respectively.
- mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
SOC specific device node entry
usb_otg_hs: usb_otg_hs@4a0ab000 {
compatible = "ti,omap4-musb";
ti,hwmods = "usb_otg_hs";
multipoint = <1>;
num_eps = <16>;
ram_bits = <12>;
};
Board specific device node entry
&usb_otg_hs {
interface_type = <1>;
mode = <3>;
power = <50>;
};
...@@ -30,6 +30,7 @@ ...@@ -30,6 +30,7 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/list.h> #include <linux/list.h>
#include <linux/io.h> #include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h> #include <linux/platform_device.h>
#include <linux/dma-mapping.h> #include <linux/dma-mapping.h>
#include <linux/pm_runtime.h> #include <linux/pm_runtime.h>
...@@ -470,8 +471,11 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32); ...@@ -470,8 +471,11 @@ static u64 omap2430_dmamask = DMA_BIT_MASK(32);
static int __devinit omap2430_probe(struct platform_device *pdev) static int __devinit omap2430_probe(struct platform_device *pdev)
{ {
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data; struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
struct omap_musb_board_data *data;
struct platform_device *musb; struct platform_device *musb;
struct omap2430_glue *glue; struct omap2430_glue *glue;
struct device_node *np = pdev->dev.of_node;
struct musb_hdrc_config *config;
struct resource *res; struct resource *res;
int ret = -ENOMEM; int ret = -ENOMEM;
...@@ -501,6 +505,42 @@ static int __devinit omap2430_probe(struct platform_device *pdev) ...@@ -501,6 +505,42 @@ static int __devinit omap2430_probe(struct platform_device *pdev)
if (glue->control_otghs == NULL) if (glue->control_otghs == NULL)
dev_dbg(&pdev->dev, "Failed to obtain control memory\n"); dev_dbg(&pdev->dev, "Failed to obtain control memory\n");
if (np) {
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(&pdev->dev,
"failed to allocate musb platfrom data\n");
ret = -ENOMEM;
goto err1;
}
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev,
"failed to allocate musb board data\n");
ret = -ENOMEM;
goto err1;
}
config = devm_kzalloc(&pdev->dev, sizeof(*config), GFP_KERNEL);
if (!data) {
dev_err(&pdev->dev,
"failed to allocate musb hdrc config\n");
goto err1;
}
of_property_read_u32(np, "mode", (u32 *)&pdata->mode);
of_property_read_u32(np, "interface_type",
(u32 *)&data->interface_type);
of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);
of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);
of_property_read_u32(np, "power", (u32 *)&pdata->power);
config->multipoint = of_property_read_bool(np, "multipoint");
pdata->board_data = data;
pdata->config = config;
}
pdata->platform_ops = &omap2430_ops; pdata->platform_ops = &omap2430_ops;
platform_set_drvdata(pdev, glue); platform_set_drvdata(pdev, glue);
...@@ -597,12 +637,26 @@ static struct dev_pm_ops omap2430_pm_ops = { ...@@ -597,12 +637,26 @@ static struct dev_pm_ops omap2430_pm_ops = {
#define DEV_PM_OPS NULL #define DEV_PM_OPS NULL
#endif #endif
#ifdef CONFIG_OF
static const struct of_device_id omap2430_id_table[] = {
{
.compatible = "ti,omap4-musb"
},
{
.compatible = "ti,omap3-musb"
},
{},
};
MODULE_DEVICE_TABLE(of, omap2430_id_table);
#endif
static struct platform_driver omap2430_driver = { static struct platform_driver omap2430_driver = {
.probe = omap2430_probe, .probe = omap2430_probe,
.remove = __devexit_p(omap2430_remove), .remove = __devexit_p(omap2430_remove),
.driver = { .driver = {
.name = "musb-omap2430", .name = "musb-omap2430",
.pm = DEV_PM_OPS, .pm = DEV_PM_OPS,
.of_match_table = of_match_ptr(omap2430_id_table),
}, },
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment