Commit 00ae7946 authored by Barry Song's avatar Barry Song Committed by Greg Kroah-Hartman

Staging: iio: adis16209/220/240/350: tuning spi delay to make hardware more stable

Signed-off-by: default avatarBarry Song <21cnbao@gmail.com>
Acked-by: default avatarJonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 3fd66da1
......@@ -76,11 +76,13 @@ static int adis16209_spi_write_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 30,
}, {
.tx_buf = st->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 30,
},
};
......@@ -120,13 +122,13 @@ static int adis16209_spi_read_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 20,
.delay_usecs = 30,
}, {
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 20,
.delay_usecs = 30,
},
};
......
......@@ -72,13 +72,13 @@ static int adis16220_spi_write_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.tx_buf = st->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......@@ -118,13 +118,13 @@ static int adis16220_spi_read_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......@@ -291,9 +291,9 @@ static int adis16220_check_status(struct device *dev)
if (status & ADIS16220_DIAG_STAT_FLASH_UPT)
dev_err(dev, "Flash update failed\n");
if (status & ADIS16220_DIAG_STAT_POWER_HIGH)
dev_err(dev, "Power supply above 5.25V\n");
dev_err(dev, "Power supply above 3.625V\n");
if (status & ADIS16220_DIAG_STAT_POWER_LOW)
dev_err(dev, "Power supply below 4.75V\n");
dev_err(dev, "Power supply below 3.15V\n");
error_ret:
return ret;
......
......@@ -74,13 +74,13 @@ static int adis16240_spi_write_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.tx_buf = st->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......@@ -120,13 +120,13 @@ static int adis16240_spi_read_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......
......@@ -75,13 +75,13 @@ static int adis16350_spi_write_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.tx_buf = st->tx + 2,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......@@ -121,13 +121,13 @@ static int adis16350_spi_read_reg_16(struct device *dev,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
}, {
.rx_buf = st->rx,
.bits_per_word = 8,
.len = 2,
.cs_change = 1,
.delay_usecs = 25,
.delay_usecs = 35,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment