Commit 00b4703f authored by Ondrej Zary's avatar Ondrej Zary Committed by Russell King

cyber2000fb: fix machine hang on module load

I was testing two CyberPro 2000 based PCI cards on x86 and the machine always
hanged completely when the cyber2000fb module was loaded. It seems that the
card hangs when some registers are accessed too quickly after writing RAMDAC
control register. With this patch, both card work.

Add delay after RAMDAC control register write to prevent hangs on module load.
Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent f2d2420b
...@@ -436,6 +436,8 @@ static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb) ...@@ -436,6 +436,8 @@ static void cyber2000fb_write_ramdac_ctrl(struct cfb_info *cfb)
cyber2000fb_writeb(i | 4, 0x3cf, cfb); cyber2000fb_writeb(i | 4, 0x3cf, cfb);
cyber2000fb_writeb(val, 0x3c6, cfb); cyber2000fb_writeb(val, 0x3c6, cfb);
cyber2000fb_writeb(i, 0x3cf, cfb); cyber2000fb_writeb(i, 0x3cf, cfb);
/* prevent card lock-up observed on x86 with CyberPro 2000 */
cyber2000fb_readb(0x3cf, cfb);
} }
static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw) static void cyber2000fb_set_timing(struct cfb_info *cfb, struct par_info *hw)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment