drm/msm/dpu: inline _setup_intf_ops()

Inline the _setup_intf_ops() function, it makes it easier to handle
different conditions involving INTF configuration.
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/555551/
Link: https://lore.kernel.org/r/20230904020454.2945667-5-dmitry.baryshkov@linaro.org

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c

@@ -527,35 +527,6 @@ static void dpu_hw_intf_program_intf_cmd_cfg(struct dpu_hw_intf *ctx,
 	DPU_REG_WRITE(&ctx->hw, INTF_CONFIG2, intf_cfg2);
 }
 
-static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
-		unsigned long cap, const struct dpu_mdss_version *mdss_rev)
-{
-	ops->setup_timing_gen = dpu_hw_intf_setup_timing_engine;
-	ops->setup_prg_fetch  = dpu_hw_intf_setup_prg_fetch;
-	ops->get_status = dpu_hw_intf_get_status;
-	ops->enable_timing = dpu_hw_intf_enable_timing_engine;
-	ops->get_line_count = dpu_hw_intf_get_line_count;
-	if (cap & BIT(DPU_INTF_INPUT_CTRL))
-		ops->bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
-	ops->setup_misr = dpu_hw_intf_setup_misr;
-	ops->collect_misr = dpu_hw_intf_collect_misr;
-
-	if (cap & BIT(DPU_INTF_TE)) {
-		ops->enable_tearcheck = dpu_hw_intf_enable_te;
-		ops->disable_tearcheck = dpu_hw_intf_disable_te;
-		ops->connect_external_te = dpu_hw_intf_connect_external_te;
-		ops->vsync_sel = dpu_hw_intf_vsync_sel;
-		ops->disable_autorefresh = dpu_hw_intf_disable_autorefresh;
-	}
-
-	/* Technically, INTF_CONFIG2 is present for DPU 5.0+, but
-	 * we can configure it for DPU 7.0+ since the wide bus and DSC flags
-	 * would not be set for DPU < 7.0 anyways
-	 */
-	if (mdss_rev->core_major_ver >= 7)
-		ops->program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
-}
-
 struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
 		void __iomem *addr, const struct dpu_mdss_version *mdss_rev)
 {
@@ -578,7 +549,32 @@ struct dpu_hw_intf *dpu_hw_intf_init(const struct dpu_intf_cfg *cfg,
 	 */
 	c->idx = cfg->id;
 	c->cap = cfg;
-	_setup_intf_ops(&c->ops, c->cap->features, mdss_rev);
+
+	c->ops.setup_timing_gen = dpu_hw_intf_setup_timing_engine;
+	c->ops.setup_prg_fetch  = dpu_hw_intf_setup_prg_fetch;
+	c->ops.get_status = dpu_hw_intf_get_status;
+	c->ops.enable_timing = dpu_hw_intf_enable_timing_engine;
+	c->ops.get_line_count = dpu_hw_intf_get_line_count;
+	c->ops.setup_misr = dpu_hw_intf_setup_misr;
+	c->ops.collect_misr = dpu_hw_intf_collect_misr;
+
+	if (cfg->features & BIT(DPU_INTF_INPUT_CTRL))
+		c->ops.bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
+
+	if (cfg->features & BIT(DPU_INTF_TE)) {
+		c->ops.enable_tearcheck = dpu_hw_intf_enable_te;
+		c->ops.disable_tearcheck = dpu_hw_intf_disable_te;
+		c->ops.connect_external_te = dpu_hw_intf_connect_external_te;
+		c->ops.vsync_sel = dpu_hw_intf_vsync_sel;
+		c->ops.disable_autorefresh = dpu_hw_intf_disable_autorefresh;
+	}
+
+	/* Technically, INTF_CONFIG2 is present for DPU 5.0+, but
+	 * we can configure it for DPU 7.0+ since the wide bus and DSC flags
+	 * would not be set for DPU < 7.0 anyways
+	 */
+	if (mdss_rev->core_major_ver >= 7)
+		c->ops.program_intf_cmd_cfg = dpu_hw_intf_program_intf_cmd_cfg;
 
 	return c;
 }