can: mcp251xfd: mcp251xfd_probe(): remove known bad combinations from errata tabe

The published errata specify the maximum allowed SPI frequency to be
max 85% of (FSYSCLK/2). So there's no need to track known bad clock
settings in the driver. As the setup of known good values is a bit
tricky, keep them.

Link: https://lore.kernel.org/r/20210128104644.2982125-4-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

drivers/net/can/spi/mcp251xfd/mcp251xfd-core.c

@@ -2945,18 +2945,15 @@ static int mcp251xfd_probe(struct spi_device *spi)
 	 * Ensure that FSCK is less than or equal to 0.85 *
 	 * (FSYSCLK/2).
 	 *
-	 * Known good and bad combinations are:
+	 * Known good combinations are:
 	 *
-	 * MCP	ext-clk	SoC			SPI			SPI-clk		max-clk	parent-clk	Status	config
+	 * MCP	ext-clk	SoC			SPI			SPI-clk		max-clk	parent-clk	config
 	 *
-	 * 2518	20 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	 8333333 Hz	 83.33%	600000000 Hz	good	assigned-clocks = <&ccu CLK_SPIx>
-	 * 2518	20 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	 9375000 Hz	 93.75%	600000000 Hz	bad	assigned-clocks = <&ccu CLK_SPIx>
-	 * 2518	40 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	16666667 Hz	 83.33%	600000000 Hz	good	assigned-clocks = <&ccu CLK_SPIx>
-	 * 2518	40 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	18750000 Hz	 93.75%	600000000 Hz	bad	assigned-clocks = <&ccu CLK_SPIx>
-	 * 2517	40 MHz	atmel,sama5d27		atmel,at91rm9200-spi	16400000 Hz	 82.00%	 82000000 Hz	good	default
-	 * 2518	40 MHz	atmel,sama5d27		atmel,at91rm9200-spi	16400000 Hz	 82.00%	 82000000 Hz	good	default
-	 * 2517	20 MHz	fsl,imx8mm		fsl,imx51-ecspi		 8333333 Hz	 83.33%	 16666667 Hz	good	assigned-clocks = <&clk IMX8MM_CLK_ECSPIx_ROOT>
-	 * 2517	20 MHz	fsl,imx8mm		fsl,imx51-ecspi		 9523809 Hz	 95.34%	 28571429 Hz	bad	assigned-clocks = <&clk IMX8MM_CLK_ECSPIx_ROOT>
+	 * 2518	20 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	 8333333 Hz	 83.33%	600000000 Hz	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2518	40 MHz	allwinner,sun8i-h3	allwinner,sun8i-h3-spi	16666667 Hz	 83.33%	600000000 Hz	assigned-clocks = <&ccu CLK_SPIx>
+	 * 2517	40 MHz	atmel,sama5d27		atmel,at91rm9200-spi	16400000 Hz	 82.00%	 82000000 Hz	default
+	 * 2518	40 MHz	atmel,sama5d27		atmel,at91rm9200-spi	16400000 Hz	 82.00%	 82000000 Hz	default
+	 * 2517	20 MHz	fsl,imx8mm		fsl,imx51-ecspi		 8333333 Hz	 83.33%	 16666667 Hz	assigned-clocks = <&clk IMX8MM_CLK_ECSPIx_ROOT>
 	 *
 	 */
 	priv->spi_max_speed_hz_orig = spi->max_speed_hz;