leds: leds-lp55xx: Generalize set_led_current function

Generalize set_led_current function as the implementation is the same for
most of the lp55xx based LED driver.
Suggested-by: Lee Jones <lee@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://lore.kernel.org/r/20240626160027.19703-13-ansuelsmth@gmail.comSigned-off-by: Lee Jones <lee@kernel.org>

drivers/leds/leds-lp5521.c

@@ -108,13 +108,6 @@ static inline void lp5521_wait_enable_done(void)
 	usleep_range(500, 600);
 }
 
-static void lp5521_set_led_current(struct lp55xx_led *led, u8 led_current)
-{
-	led->led_current = led_current;
-	lp55xx_write(led->chip, LP5521_REG_LED_CURRENT_BASE + led->chan_nr,
-		led_current);
-}
-
 static void lp5521_stop_engine(struct lp55xx_chip *chip)
 {
 	enum lp55xx_engine_index idx = chip->engine_idx;
@@ -359,11 +352,14 @@ static struct lp55xx_device_config lp5521_cfg = {
 	.reg_led_pwm_base = {
 		.addr = LP5521_REG_LED_PWM_BASE,
 	},
+	.reg_led_current_base = {
+		.addr = LP5521_REG_LED_CURRENT_BASE,
+	},
 	.max_channel  = LP5521_MAX_LEDS,
 	.post_init_device   = lp5521_post_init_device,
 	.brightness_fn      = lp55xx_led_brightness,
 	.multicolor_brightness_fn = lp55xx_multicolor_brightness,
-	.set_led_current    = lp5521_set_led_current,
+	.set_led_current    = lp55xx_set_led_current,
 	.firmware_cb        = lp55xx_firmware_loaded_cb,
 	.run_engine         = lp5521_run_engine,
 	.dev_attr_group     = &lp5521_group,

drivers/leds/leds-lp5523.c

@@ -122,13 +122,6 @@ static inline void lp5523_wait_opmode_done(void)
 	usleep_range(1000, 2000);
 }
 
-static void lp5523_set_led_current(struct lp55xx_led *led, u8 led_current)
-{
-	led->led_current = led_current;
-	lp55xx_write(led->chip, LP5523_REG_LED_CURRENT_BASE + led->chan_nr,
-		led_current);
-}
-
 static int lp5523_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;
@@ -731,12 +724,15 @@ static struct lp55xx_device_config lp5523_cfg = {
 	.reg_led_pwm_base = {
 		.addr = LP5523_REG_LED_PWM_BASE,
 	},
+	.reg_led_current_base = {
+		.addr = LP5523_REG_LED_CURRENT_BASE,
+	},
 	.pages_per_engine   = LP5523_PAGES_PER_ENGINE,
 	.max_channel  = LP5523_MAX_LEDS,
 	.post_init_device   = lp5523_post_init_device,
 	.brightness_fn      = lp55xx_led_brightness,
 	.multicolor_brightness_fn = lp55xx_multicolor_brightness,
-	.set_led_current    = lp5523_set_led_current,
+	.set_led_current    = lp55xx_set_led_current,
 	.firmware_cb        = lp55xx_firmware_loaded_cb,
 	.run_engine         = lp5523_run_engine,
 	.dev_attr_group     = &lp5523_group,

drivers/leds/leds-lp55xx-common.c

@@ -277,6 +277,17 @@ int lp55xx_multicolor_brightness(struct lp55xx_led *led)
 }
 EXPORT_SYMBOL_GPL(lp55xx_multicolor_brightness);
 
+void lp55xx_set_led_current(struct lp55xx_led *led, u8 led_current)
+{
+	struct lp55xx_chip *chip = led->chip;
+	const struct lp55xx_device_config *cfg = chip->cfg;
+
+	led->led_current = led_current;
+	lp55xx_write(led->chip, cfg->reg_led_current_base.addr + led->chan_nr,
+		     led_current);
+}
+EXPORT_SYMBOL_GPL(lp55xx_set_led_current);
+
 static void lp55xx_reset_device(struct lp55xx_chip *chip)
 {
 	const struct lp55xx_device_config *cfg = chip->cfg;

drivers/leds/leds-lp55xx-common.h

@@ -101,6 +101,7 @@ struct lp55xx_reg {
  * @enable             : Chip specific enable command
  * @prog_mem_base      : Chip specific base reg address for chip SMEM programming
  * @reg_led_pwm_base   : Chip specific base reg address for LED PWM conf
+ * @reg_led_current_base : Chip specific base reg address for LED current conf
  * @pages_per_engine   : Assigned pages for each engine
  *                       (if not set chip doesn't support pages)
  * @max_channel        : Maximum number of channels
@@ -120,6 +121,7 @@ struct lp55xx_device_config {
 	const struct lp55xx_reg enable;
 	const struct lp55xx_reg prog_mem_base;
 	const struct lp55xx_reg reg_led_pwm_base;
+	const struct lp55xx_reg reg_led_current_base;
 	const int pages_per_engine;
 	const int max_channel;
 
@@ -217,6 +219,7 @@ extern int lp55xx_update_program_memory(struct lp55xx_chip *chip,
 extern void lp55xx_firmware_loaded_cb(struct lp55xx_chip *chip);
 extern int lp55xx_led_brightness(struct lp55xx_led *led);
 extern int lp55xx_multicolor_brightness(struct lp55xx_led *led);
+extern void lp55xx_set_led_current(struct lp55xx_led *led, u8 led_current);
 
 /* common probe/remove function */
 extern int lp55xx_probe(struct i2c_client *client);

drivers/leds/leds-lp8501.c

@@ -84,13 +84,6 @@ static inline void lp8501_wait_opmode_done(void)
 	usleep_range(1000, 2000);
 }
 
-static void lp8501_set_led_current(struct lp55xx_led *led, u8 led_current)
-{
-	led->led_current = led_current;
-	lp55xx_write(led->chip, LP8501_REG_LED_CURRENT_BASE + led->chan_nr,
-		led_current);
-}
-
 static int lp8501_post_init_device(struct lp55xx_chip *chip)
 {
 	int ret;
@@ -163,11 +156,14 @@ static struct lp55xx_device_config lp8501_cfg = {
 	.reg_led_pwm_base = {
 		.addr = LP8501_REG_LED_PWM_BASE,
 	},
+	.reg_led_current_base = {
+		.addr = LP8501_REG_LED_CURRENT_BASE,
+	},
 	.pages_per_engine   = LP8501_PAGES_PER_ENGINE,
 	.max_channel  = LP8501_MAX_LEDS,
 	.post_init_device   = lp8501_post_init_device,
 	.brightness_fn      = lp55xx_led_brightness,
-	.set_led_current    = lp8501_set_led_current,
+	.set_led_current    = lp55xx_set_led_current,
 	.firmware_cb        = lp55xx_firmware_loaded_cb,
 	.run_engine         = lp8501_run_engine,
 };