Commit 01ea63d9 authored by Guo Zeng's avatar Guo Zeng Committed by Barry Song

ARM: sirf: add two debug ports for CSRatlas7 SoC

this patch adds UART0 and UART1 as LLUART port, as the new Atlas7
registers layout are different, it also refines some names of old
hard-coded MARCOs and uses CONFIG_DEBUG_UART_PHYS/DEBUG_UART_VIRT
to define different base addresses for multiple ports.
Signed-off-by: default avatarGuo Zeng <Guo.Zeng@csr.com>
Signed-off-by: default avatarZhiwu Song <Zhiwu.Song@csr.com>
Signed-off-by: default avatarBarry Song <Baohua.Song@csr.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 07dde66c
......@@ -916,10 +916,29 @@ choice
config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2
select DEBUG_SIRFSOC_UART
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFATLAS7_UART0
bool "Kernel low-level debugging messages via SiRFatlas7 UART0"
depends on ARCH_ATLAS7
select DEBUG_SIRFSOC_UART
help
Say Y here if you want the debug print routines to direct
their output to the uart0 port on SiRFATLAS7 devices.The uart0
is used on SiRFATLAS7 as a extra debug port.sometimes an extra
debug port can be very useful.
config DEBUG_SIRFATLAS7_UART1
bool "Kernel low-level debugging messages via SiRFatlas7 UART1"
depends on ARCH_ATLAS7
select DEBUG_SIRFSOC_UART
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFATLAS7 devices.
config STIH41X_DEBUG_ASC2
bool "Use StiH415/416 ASC2 UART for low-level debug"
depends on ARCH_STI
......@@ -1154,6 +1173,10 @@ config DEBUG_STI_UART
bool
depends on ARCH_STI
config DEBUG_SIRFSOC_UART
bool
depends on ARCH_SIRF
config DEBUG_LL_INCLUDE
string
default "debug/sa1100.S" if DEBUG_SA1100
......@@ -1188,7 +1211,7 @@ config DEBUG_LL_INCLUDE
default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1
default "debug/sirf.S" if DEBUG_SIRFSOC_UART
default "debug/sti.S" if DEBUG_STI_UART
default "debug/tegra.S" if DEBUG_TEGRA_UART
default "debug/ux500.S" if DEBUG_UX500_UART
......@@ -1244,6 +1267,8 @@ config DEBUG_UART_PHYS
default 0x11009000 if DEBUG_MT8135_UART3
default 0x16000000 if ARCH_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x18010000 if DEBUG_SIRFATLAS7_UART0
default 0x18020000 if DEBUG_SIRFATLAS7_UART1
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
default 0x20060000 if DEBUG_RK29_UART0
default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
......@@ -1270,6 +1295,7 @@ config DEBUG_UART_PHYS
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
......@@ -1313,7 +1339,8 @@ config DEBUG_UART_PHYS
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
......@@ -1370,8 +1397,11 @@ config DEBUG_UART_VIRT
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
default 0xfec02000 if DEBUG_SOCFPGA_UART
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE
default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0
default 0xfec20000 if DEBUG_SIRFATLAS7_UART1
default 0xfec60000 if DEBUG_SIRFPRIMA2_UART1
default 0xfec90000 if DEBUG_RK32_UART2
default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2
......@@ -1391,7 +1421,7 @@ config DEBUG_UART_VIRT
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || DEBUG_SIRFSOC_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
......
......@@ -6,35 +6,33 @@
* Licensed under GPLv2 or later.
*/
#if defined(CONFIG_DEBUG_SIRFPRIMA2_UART1)
#define SIRFSOC_UART1_PA_BASE 0xb0060000
#else
#define SIRFSOC_UART1_PA_BASE 0
#endif
#define SIRF_LLUART_TXFIFO_STATUS 0x0114
#define SIRF_LLUART_TXFIFO_DATA 0x0118
#define SIRFSOC_UART1_VA_BASE 0xFEC60000
#define SIRF_LLUART_TXFIFO_FULL (1 << 5)
#define SIRFSOC_UART_TXFIFO_STATUS 0x0114
#define SIRFSOC_UART_TXFIFO_DATA 0x0118
#ifdef CONFIG_DEBUG_SIRFATLAS7_UART0
#define SIRF_LLUART_TXFIFO_EMPTY (1 << 8)
#else
#define SIRF_LLUART_TXFIFO_EMPTY (1 << 6)
#endif
#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5)
#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6)
.macro addruart, rp, rv, tmp
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
ldr \rp, =CONFIG_DEBUG_UART_PHYS @ physical
ldr \rv, =CONFIG_DEBUG_UART_VIRT @ virtual
.endm
.macro senduart,rd,rx
str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA]
str \rd, [\rx, #SIRF_LLUART_TXFIFO_DATA]
.endm
.macro busyuart,rd,rx
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS]
tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY
1001: ldr \rd, [\rx, #SIRF_LLUART_TXFIFO_STATUS]
tst \rd, #SIRF_LLUART_TXFIFO_EMPTY
beq 1001b
.endm
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment