Commit 021db8e2 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (77 commits)
  spi/omap: Fix DMA API usage in OMAP MCSPI driver
  spi/imx: correct the test on platform_get_irq() return value
  spi/topcliff: Typo fix threhold to threshold
  spi/dw_spi Typo change diable to disable.
  spi/fsl_espi: change the read behaviour of the SPIRF
  spi/mpc52xx-psc-spi: move probe/remove to proper sections
  spi/dw_spi: add DMA support
  spi/dw_spi: change to EXPORT_SYMBOL_GPL for exported APIs
  spi/dw_spi: Fix too short timeout in spi polling loop
  spi/pl022: convert running variable
  spi/pl022: convert busy flag to a bool
  spi/pl022: pass the returned sglen to the DMA engine
  spi/pl022: map the buffers on the DMA engine
  spi/topcliff_pch: Fix data transfer issue
  spi/imx: remove autodetection
  spi/pxa2xx: pass of_node to spi device and set a parent device
  spi/pxa2xx: Modify RX-Tresh instead of busy-loop for the remaining RX bytes.
  spi/pxa2xx: Add chipselect support for Sodaville
  spi/pxa2xx: Consider CE4100's FIFO depth
  spi/pxa2xx: Add CE4100 support
  ...
parents 72eb6a79 07fe0351
......@@ -19,7 +19,7 @@ Declaring PXA2xx Master Controllers
-----------------------------------
Typically a SPI master is defined in the arch/.../mach-*/board-*.c as a
"platform device". The master configuration is passed to the driver via a table
found in arch/arm/mach-pxa/include/mach/pxa2xx_spi.h:
found in include/linux/spi/pxa2xx_spi.h:
struct pxa2xx_spi_master {
enum pxa_ssp_type ssp_type;
......@@ -94,7 +94,7 @@ using the "spi_board_info" structure found in "linux/spi/spi.h". See
Each slave device attached to the PXA must provide slave specific configuration
information via the structure "pxa2xx_spi_chip" found in
"arch/arm/mach-pxa/include/mach/pxa2xx_spi.h". The pxa2xx_spi master controller driver
"include/linux/spi/pxa2xx_spi.h". The pxa2xx_spi master controller driver
will uses the configuration whenever the driver communicates with the slave
device. All fields are optional.
......
......@@ -412,12 +412,7 @@ static struct resource dm355_spi0_resources[] = {
static struct davinci_spi_platform_data dm355_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
.clk_internal = 1,
.cs_hold = 1,
.intr_level = 0,
.poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
.c2tdelay = 0,
.t2cdelay = 0,
.cshold_bug = true,
};
static struct platform_device dm355_spi0_device = {
.name = "spi_davinci",
......
......@@ -625,12 +625,6 @@ static u64 dm365_spi0_dma_mask = DMA_BIT_MASK(32);
static struct davinci_spi_platform_data dm365_spi0_pdata = {
.version = SPI_VERSION_1,
.num_chipselect = 2,
.clk_internal = 1,
.cs_hold = 1,
.intr_level = 0,
.poll_mode = 1, /* 0 -> interrupt mode 1-> polling mode */
.c2tdelay = 0,
.t2cdelay = 0,
};
static struct resource dm365_spi0_resources[] = {
......
......@@ -19,26 +19,66 @@
#ifndef __ARCH_ARM_DAVINCI_SPI_H
#define __ARCH_ARM_DAVINCI_SPI_H
#define SPI_INTERN_CS 0xFF
enum {
SPI_VERSION_1, /* For DM355/DM365/DM6467 */
SPI_VERSION_2, /* For DA8xx */
};
/**
* davinci_spi_platform_data - Platform data for SPI master device on DaVinci
*
* @version: version of the SPI IP. Different DaVinci devices have slightly
* varying versions of the same IP.
* @num_chipselect: number of chipselects supported by this SPI master
* @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt
* controller withn the SoC. Possible values are 0 and 1.
* @chip_sel: list of GPIOs which can act as chip-selects for the SPI.
* SPI_INTERN_CS denotes internal SPI chip-select. Not necessary
* to populate if all chip-selects are internal.
* @cshold_bug: set this to true if the SPI controller on your chip requires
* a write to CSHOLD bit in between transfers (like in DM355).
*/
struct davinci_spi_platform_data {
u8 version;
u8 num_chipselect;
u8 intr_line;
u8 *chip_sel;
bool cshold_bug;
};
/**
* davinci_spi_config - Per-chip-select configuration for SPI slave devices
*
* @wdelay: amount of delay between transmissions. Measured in number of
* SPI module clocks.
* @odd_parity: polarity of parity flag at the end of transmit data stream.
* 0 - odd parity, 1 - even parity.
* @parity_enable: enable transmission of parity at end of each transmit
* data stream.
* @io_type: type of IO transfer. Choose between polled, interrupt and DMA.
* @timer_disable: disable chip-select timers (setup and hold)
* @c2tdelay: chip-select setup time. Measured in number of SPI module clocks.
* @t2cdelay: chip-select hold time. Measured in number of SPI module clocks.
* @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured
* in number of SPI clocks.
* @c2edelay: chip-select active to SPI ENAn signal active time. Measured in
* number of SPI clocks.
*/
struct davinci_spi_config {
u8 wdelay;
u8 odd_parity;
u8 parity_enable;
u8 wait_enable;
#define SPI_IO_TYPE_INTR 0
#define SPI_IO_TYPE_POLL 1
#define SPI_IO_TYPE_DMA 2
u8 io_type;
u8 timer_disable;
u8 clk_internal;
u8 cs_hold;
u8 intr_level;
u8 poll_mode;
u8 use_dma;
u8 c2tdelay;
u8 t2cdelay;
u8 t2edelay;
u8 c2edelay;
};
#endif /* __ARCH_ARM_DAVINCI_SPI_H */
......@@ -17,13 +17,13 @@
#include <linux/mtd/nand-gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <mach/pxa25x.h>
#include <mach/pxa2xx_spi.h>
#include "generic.h"
......
......@@ -19,12 +19,12 @@
#include <video/mbxfb.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/libertas_spi.h>
#include <mach/pxa27x.h>
#include <mach/ohci.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
#include "generic.h"
......
......@@ -28,6 +28,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <video/w100fb.h>
......@@ -48,7 +49,6 @@
#include <mach/irda.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/corgi.h>
#include <mach/sharpsl_pm.h>
......
......@@ -3,6 +3,7 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/pxa2xx_spi.h>
#include <asm/pmu.h>
#include <mach/udc.h>
......@@ -12,7 +13,6 @@
#include <mach/irda.h>
#include <mach/ohci.h>
#include <plat/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <mach/camera.h>
#include <mach/audio.h>
#include <mach/hardware.h>
......
......@@ -26,6 +26,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/tdo24m.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
#include <linux/i2c.h>
......@@ -46,7 +47,6 @@
#include <plat/pxa27x_keypad.h>
#include <plat/i2c.h>
#include <mach/camera.h>
#include <mach/pxa2xx_spi.h>
#include "generic.h"
#include "devices.h"
......
......@@ -33,6 +33,7 @@
#include <linux/regulator/max1586.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/usb/gpio_vbus.h>
#include <mach/hardware.h>
......@@ -43,7 +44,6 @@
#include <mach/hx4700.h>
#include <plat/i2c.h>
#include <mach/irda.h>
#include <mach/pxa2xx_spi.h>
#include <video/platform_lcd.h>
#include <video/w100fb.h>
......
......@@ -24,7 +24,7 @@
#include <mach/mxm8x10.h>
#include <linux/spi/spi.h>
#include <mach/pxa2xx_spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/can/platform/mcp251x.h>
#include "generic.h"
......
/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef PXA2XX_SPI_H_
#define PXA2XX_SPI_H_
#define PXA2XX_CS_ASSERT (0x01)
#define PXA2XX_CS_DEASSERT (0x02)
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
};
/* spi_board_info.controller_data for SPI slave devices,
* copied to spi_device.platform_data ... mostly for dma tuning
*/
struct pxa2xx_spi_chip {
u8 tx_threshold;
u8 rx_threshold;
u8 dma_burst_size;
u32 timeout;
u8 enable_loopback;
int gpio_cs;
void (*cs_control)(u32 command);
};
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
#endif /*PXA2XX_SPI_H_*/
......@@ -22,6 +22,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/smc91x.h>
#include <linux/i2c.h>
#include <linux/leds.h>
......@@ -42,7 +43,6 @@
#include <mach/pxa300.h>
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <mach/pxa2xx_spi.h>
#include <plat/pxa27x_keypad.h>
#include <mach/littleton.h>
#include <plat/i2c.h>
......
......@@ -25,7 +25,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <mach/pxa2xx_spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <asm/setup.h>
#include <asm/memory.h>
......
......@@ -25,12 +25,12 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/max7301.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/leds.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pcm027.h>
#include "generic.h"
......
......@@ -25,6 +25,7 @@
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <mach/hardware.h>
......@@ -43,7 +44,6 @@
#include <mach/irda.h>
#include <mach/poodle.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
#include <asm/hardware/scoop.h>
......
......@@ -23,7 +23,7 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/spi/corgi_lcd.h>
#include <linux/mtd/physmap.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/sharpsl.h>
#include <linux/input/matrix_keypad.h>
#include <linux/regulator/machine.h>
......@@ -42,7 +42,6 @@
#include <mach/mmc.h>
#include <mach/ohci.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/spitz.h>
#include <mach/sharpsl_pm.h>
#include <mach/smemc.h>
......
......@@ -46,11 +46,11 @@
#include <plat/i2c.h>
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/pxa2xx_spi.h>
#include <mach/pxa27x-udc.h>
#include <mach/smemc.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mfd/da903x.h>
#include <linux/sht15.h>
......
......@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/pda_power.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <asm/setup.h>
......@@ -44,7 +45,6 @@
#include <mach/mmc.h>
#include <mach/udc.h>
#include <mach/tosa_bt.h>
#include <mach/pxa2xx_spi.h>
#include <mach/audio.h>
#include <mach/smemc.h>
......
......@@ -40,7 +40,6 @@
#include <asm/mach/flash.h>
#include <mach/pxa27x.h>
#include <mach/pxa2xx_spi.h>
#include <mach/trizeps4.h>
#include <mach/audio.h>
#include <mach/pxafb.h>
......
......@@ -20,6 +20,7 @@
#include <linux/z2_battery.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/spi/libertas_spi.h>
#include <linux/spi/lms283gf05.h>
#include <linux/power_supply.h>
......@@ -38,7 +39,6 @@
#include <mach/pxafb.h>
#include <mach/mmc.h>
#include <plat/pxa27x_keypad.h>
#include <mach/pxa2xx_spi.h>
#include <plat/i2c.h>
......
......@@ -20,6 +20,7 @@
#include <linux/dm9000.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
......@@ -41,7 +42,6 @@
#include <mach/pxa27x-udc.h>
#include <mach/udc.h>
#include <mach/pxafb.h>
#include <mach/pxa2xx_spi.h>
#include <mach/mfp-pxa27x.h>
#include <mach/pm.h>
#include <mach/audio.h>
......
......@@ -28,11 +28,11 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <plat/ssp.h>
static DEFINE_MUTEX(ssp_lock);
static LIST_HEAD(ssp_list);
......
......@@ -111,11 +111,14 @@ config SPI_COLDFIRE_QSPI
will be called coldfire_qspi.
config SPI_DAVINCI
tristate "SPI controller driver for DaVinci/DA8xx SoC's"
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
depends on SPI_MASTER && ARCH_DAVINCI
select SPI_BITBANG
help
SPI master controller for DaVinci and DA8xx SPI modules.
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
This driver can also be built as a module. The module will be called
davinci_spi.
config SPI_EP93XX
tristate "Cirrus Logic EP93xx SPI controller"
......@@ -267,12 +270,15 @@ config SPI_PPC4xx
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on ARCH_PXA && EXPERIMENTAL
select PXA_SSP
depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx SSP port as a SPI master controller.
The driver can be configured to use any SSP port and additional
documentation can be found a Documentation/spi/pxa2xx.
This enables using a PXA2xx or Sodaville SSP port as a SPI master
controller. The driver can be configured to use any SSP port and
additional documentation can be found a Documentation/spi/pxa2xx.
config SPI_PXA2XX_PCI
def_bool SPI_PXA2XX && X86_32 && PCI
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
......@@ -353,7 +359,6 @@ config SPI_XILINX
tristate "Xilinx SPI controller common module"
depends on HAS_IOMEM && EXPERIMENTAL
select SPI_BITBANG
select SPI_XILINX_OF if (XILINX_VIRTEX || MICROBLAZE)
help
This exposes the SPI controller IP from the Xilinx EDK.
......@@ -362,19 +367,6 @@ config SPI_XILINX
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
config SPI_XILINX_OF
tristate "Xilinx SPI controller OF device"
depends on SPI_XILINX && (XILINX_VIRTEX || MICROBLAZE)
help
This is the OF driver for the SPI controller IP from the Xilinx EDK.
config SPI_XILINX_PLTFM
tristate "Xilinx SPI controller platform device"
depends on SPI_XILINX
help
This is the platform driver for the SPI controller IP
from the Xilinx EDK.
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900 && EXPERIMENTAL
......@@ -396,6 +388,10 @@ config SPI_DW_PCI
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
config SPI_DW_MID_DMA
bool "DMA support for DW SPI controller on Intel Moorestown platform"
depends on SPI_DW_PCI && INTEL_MID_DMAC
config SPI_DW_MMIO
tristate "Memory-mapped io interface driver for DW SPI core"
depends on SPI_DESIGNWARE && HAVE_CLK
......
......@@ -17,13 +17,15 @@ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o
obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o
obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o
dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o
obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
obj-$(CONFIG_SPI_IMX) += spi_imx.o
obj-$(CONFIG_SPI_LM70_LLP) += spi_lm70llp.o
obj-$(CONFIG_SPI_PXA2XX) += pxa2xx_spi.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += pxa2xx_spi_pci.o
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
obj-$(CONFIG_SPI_OMAP_100K) += omap_spi_100k.o
......@@ -43,8 +45,6 @@ obj-$(CONFIG_SPI_TEGRA) += spi_tegra.o
obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o
obj-$(CONFIG_SPI_XILINX_PLTFM) += xilinx_spi_pltfm.o
obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
obj-$(CONFIG_SPI_SH_MSIOF) += spi_sh_msiof.o
obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp.o
......
......@@ -252,11 +252,6 @@
#define STATE_DONE ((void *) 2)
#define STATE_ERROR ((void *) -1)
/*
* Queue State
*/
#define QUEUE_RUNNING (0)
#define QUEUE_STOPPED (1)
/*
* SSP State - Whether Enabled or Disabled
*/
......@@ -344,7 +339,7 @@ struct vendor_data {
* @lock: spinlock to syncronise access to driver data
* @workqueue: a workqueue on which any spi_message request is queued
* @busy: workqueue is busy
* @run: workqueue is running
* @running: workqueue is running
* @pump_transfers: Tasklet used in Interrupt Transfer mode
* @cur_msg: Pointer to current spi_message being processed
* @cur_transfer: Pointer to current spi_transfer
......@@ -369,8 +364,8 @@ struct pl022 {
struct work_struct pump_messages;
spinlock_t queue_lock;
struct list_head queue;
int busy;
int run;
bool busy;
bool running;
/* Message transfer pump */
struct tasklet_struct pump_transfers;
struct spi_message *cur_msg;
......@@ -782,9 +777,9 @@ static void *next_transfer(struct pl022 *pl022)
static void unmap_free_dma_scatter(struct pl022 *pl022)
{
/* Unmap and free the SG tables */
dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
dma_unmap_sg(pl022->dma_tx_channel->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
dma_unmap_sg(pl022->dma_rx_channel->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_rx.nents, DMA_FROM_DEVICE);
sg_free_table(&pl022->sgt_rx);
sg_free_table(&pl022->sgt_tx);
......@@ -917,7 +912,7 @@ static int configure_dma(struct pl022 *pl022)
};
unsigned int pages;
int ret;
int sglen;
int rx_sglen, tx_sglen;
struct dma_chan *rxchan = pl022->dma_rx_channel;
struct dma_chan *txchan = pl022->dma_tx_channel;
struct dma_async_tx_descriptor *rxdesc;
......@@ -956,7 +951,7 @@ static int configure_dma(struct pl022 *pl022)
tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
break;
case WRITING_U32:
tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;;
tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
break;
}
......@@ -991,20 +986,20 @@ static int configure_dma(struct pl022 *pl022)
pl022->cur_transfer->len, &pl022->sgt_tx);
/* Map DMA buffers */
sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
rx_sglen = dma_map_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_rx.nents, DMA_FROM_DEVICE);
if (!sglen)
if (!rx_sglen)
goto err_rx_sgmap;
sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
tx_sglen = dma_map_sg(txchan->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
if (!sglen)
if (!tx_sglen)
goto err_tx_sgmap;
/* Send both scatterlists */
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
pl022->sgt_rx.sgl,
pl022->sgt_rx.nents,
rx_sglen,
DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!rxdesc)
......@@ -1012,7 +1007,7 @@ static int configure_dma(struct pl022 *pl022)
txdesc = txchan->device->device_prep_slave_sg(txchan,
pl022->sgt_tx.sgl,
pl022->sgt_tx.nents,
tx_sglen,
DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
if (!txdesc)
......@@ -1040,10 +1035,10 @@ static int configure_dma(struct pl022 *pl022)
txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0);
err_rxdesc:
rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0);
dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl,
dma_unmap_sg(txchan->device->dev, pl022->sgt_tx.sgl,
pl022->sgt_tx.nents, DMA_TO_DEVICE);
err_tx_sgmap:
dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl,
dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
pl022->sgt_tx.nents, DMA_FROM_DEVICE);
err_rx_sgmap:
sg_free_table(&pl022->sgt_tx);
......@@ -1460,8 +1455,8 @@ static void pump_messages(struct work_struct *work)
/* Lock queue and check for queue work */
spin_lock_irqsave(&pl022->queue_lock, flags);
if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
pl022->busy = 0;
if (list_empty(&pl022->queue) || !pl022->running) {
pl022->busy = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return;
}
......@@ -1475,7 +1470,7 @@ static void pump_messages(struct work_struct *work)
list_entry(pl022->queue.next, struct spi_message, queue);
list_del_init(&pl022->cur_msg->queue);
pl022->busy = 1;
pl022->busy = true;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
/* Initial message state */
......@@ -1507,8 +1502,8 @@ static int __init init_queue(struct pl022 *pl022)
INIT_LIST_HEAD(&pl022->queue);
spin_lock_init(&pl022->queue_lock);
pl022->run = QUEUE_STOPPED;
pl022->busy = 0;
pl022->running = false;
pl022->busy = false;
tasklet_init(&pl022->pump_transfers,
pump_transfers, (unsigned long)pl022);
......@@ -1529,12 +1524,12 @@ static int start_queue(struct pl022 *pl022)
spin_lock_irqsave(&pl022->queue_lock, flags);
if (pl022->run == QUEUE_RUNNING || pl022->busy) {
if (pl022->running || pl022->busy) {
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return -EBUSY;
}
pl022->run = QUEUE_RUNNING;
pl022->running = true;
pl022->cur_msg = NULL;
pl022->cur_transfer = NULL;
pl022->cur_chip = NULL;
......@@ -1566,7 +1561,8 @@ static int stop_queue(struct pl022 *pl022)
if (!list_empty(&pl022->queue) || pl022->busy)
status = -EBUSY;
else pl022->run = QUEUE_STOPPED;
else
pl022->running = false;
spin_unlock_irqrestore(&pl022->queue_lock, flags);
......@@ -1684,7 +1680,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
spin_lock_irqsave(&pl022->queue_lock, flags);
if (pl022->run == QUEUE_STOPPED) {
if (!pl022->running) {
spin_unlock_irqrestore(&pl022->queue_lock, flags);
return -ESHUTDOWN;
}
......@@ -1693,7 +1689,7 @@ static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
msg->state = STATE_START;
list_add_tail(&msg->queue, &pl022->queue);
if (pl022->run == QUEUE_RUNNING && !pl022->busy)
if (pl022->running && !pl022->busy)
queue_work(pl022->workqueue, &pl022->pump_messages);
spin_unlock_irqrestore(&pl022->queue_lock, flags);
......
This diff is collapsed.
......@@ -164,20 +164,23 @@ static inline void mrst_spi_debugfs_remove(struct dw_spi *dws)
static void wait_till_not_busy(struct dw_spi *dws)
{
unsigned long end = jiffies + 1 + usecs_to_jiffies(1000);
unsigned long end = jiffies + 1 + usecs_to_jiffies(5000);
while (time_before(jiffies, end)) {
if (!(dw_readw(dws, sr) & SR_BUSY))
return;
cpu_relax();
}
dev_err(&dws->master->dev,
"DW SPI: Status keeps busy for 1000us after a read/write!\n");
"DW SPI: Status keeps busy for 5000us after a read/write!\n");
}
static void flush(struct dw_spi *dws)
{
while (dw_readw(dws, sr) & SR_RF_NOT_EMPT)
while (dw_readw(dws, sr) & SR_RF_NOT_EMPT) {
dw_readw(dws, dr);
cpu_relax();
}
wait_till_not_busy(dws);
}
......@@ -285,8 +288,10 @@ static void *next_transfer(struct dw_spi *dws)
*/
static int map_dma_buffers(struct dw_spi *dws)
{
if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
|| !dws->cur_chip->enable_dma)
if (!dws->cur_msg->is_dma_mapped
|| !dws->dma_inited
|| !dws->cur_chip->enable_dma
|| !dws->dma_ops)
return 0;
if (dws->cur_transfer->tx_dma)
......@@ -338,7 +343,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
tasklet_schedule(&dws->pump_transfers);
}
static void transfer_complete(struct dw_spi *dws)
void dw_spi_xfer_done(struct dw_spi *dws)
{
/* Update total byte transfered return count actual bytes read */
dws->cur_msg->actual_length += dws->len;
......@@ -353,6 +358,7 @@ static void transfer_complete(struct dw_spi *dws)
} else
tasklet_schedule(&dws->pump_transfers);
}
EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
......@@ -384,7 +390,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
if (dws->tx_end > dws->tx)
spi_umask_intr(dws, SPI_INT_TXEI);
else
transfer_complete(dws);
dw_spi_xfer_done(dws);
}
return IRQ_HANDLED;
......@@ -419,11 +425,7 @@ static void poll_transfer(struct dw_spi *dws)
*/
dws->read(dws);
transfer_complete(dws);
}
static void dma_transfer(struct dw_spi *dws, int cs_change)
{
dw_spi_xfer_done(dws);
}
static void pump_transfers(unsigned long data)
......@@ -592,7 +594,7 @@ static void pump_transfers(unsigned long data)
spi_set_clk(dws, clk_div ? clk_div : chip->clk_div);
spi_chip_sel(dws, spi->chip_select);
/* Set the interrupt mask, for poll mode just diable all int */
/* Set the interrupt mask, for poll mode just disable all int */
spi_mask_intr(dws, 0xff);
if (imask)
spi_umask_intr(dws, imask);
......@@ -605,7 +607,7 @@ static void pump_transfers(unsigned long data)
}
if (dws->dma_mapped)
dma_transfer(dws, cs_change);
dws->dma_ops->dma_transfer(dws, cs_change);
if (chip->poll_mode)
poll_transfer(dws);
......@@ -901,11 +903,17 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
master->setup = dw_spi_setup;
master->transfer = dw_spi_transfer;
dws->dma_inited = 0;
/* Basic HW init */
spi_hw_init(dws);
if (dws->dma_ops && dws->dma_ops->dma_init) {
ret = dws->dma_ops->dma_init(dws);
if (ret) {
dev_warn(&master->dev, "DMA init failed\n");
dws->dma_inited = 0;
}
}
/* Initial and start queue */
ret = init_queue(dws);
if (ret) {
......@@ -930,6 +938,8 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
err_queue_alloc:
destroy_queue(dws);
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
err_diable_hw:
spi_enable_chip(dws, 0);
free_irq(dws->irq, dws);
......@@ -938,7 +948,7 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
exit:
return ret;
}
EXPORT_SYMBOL(dw_spi_add_host);
EXPORT_SYMBOL_GPL(dw_spi_add_host);
void __devexit dw_spi_remove_host(struct dw_spi *dws)
{
......@@ -954,6 +964,8 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
"complete, message memory not freed\n");
if (dws->dma_ops && dws->dma_ops->dma_exit)
dws->dma_ops->dma_exit(dws);
spi_enable_chip(dws, 0);
/* Disable clk */
spi_set_clk(dws, 0);
......@@ -962,7 +974,7 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
/* Disconnect from the SPI framework */
spi_unregister_master(dws->master);
}
EXPORT_SYMBOL(dw_spi_remove_host);
EXPORT_SYMBOL_GPL(dw_spi_remove_host);
int dw_spi_suspend_host(struct dw_spi *dws)
{
......@@ -975,7 +987,7 @@ int dw_spi_suspend_host(struct dw_spi *dws)
spi_set_clk(dws, 0);
return ret;
}
EXPORT_SYMBOL(dw_spi_suspend_host);
EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
int dw_spi_resume_host(struct dw_spi *dws)
{
......@@ -987,7 +999,7 @@ int dw_spi_resume_host(struct dw_spi *dws)
dev_err(&dws->master->dev, "fail to start queue (%d)\n", ret);
return ret;
}
EXPORT_SYMBOL(dw_spi_resume_host);
EXPORT_SYMBOL_GPL(dw_spi_resume_host);
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
MODULE_DESCRIPTION("Driver for DesignWare SPI controller core");
......
/*
* dw_spi_mid.c - special handling for DW core on Intel MID platform
*
* Copyright (c) 2009, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation,
* Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*/
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/spi/dw_spi.h>
#ifdef CONFIG_SPI_DW_MID_DMA
#include <linux/intel_mid_dma.h>
#include <linux/pci.h>
struct mid_dma {
struct intel_mid_dma_slave dmas_tx;
struct intel_mid_dma_slave dmas_rx;
};
static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
{
struct dw_spi *dws = param;
return dws->dmac && (&dws->dmac->dev == chan->device->dev);
}
static int mid_spi_dma_init(struct dw_spi *dws)
{
struct mid_dma *dw_dma = dws->dma_priv;
struct intel_mid_dma_slave *rxs, *txs;
dma_cap_mask_t mask;
/*
* Get pci device for DMA controller, currently it could only
* be the DMA controller of either Moorestown or Medfield
*/
dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
if (!dws->dmac)
dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
/* 1. Init rx channel */
dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
if (!dws->rxchan)
goto err_exit;
rxs = &dw_dma->dmas_rx;
rxs->hs_mode = LNW_DMA_HW_HS;
rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
dws->rxchan->private = rxs;
/* 2. Init tx channel */
dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
if (!dws->txchan)
goto free_rxchan;
txs = &dw_dma->dmas_tx;
txs->hs_mode = LNW_DMA_HW_HS;
txs->cfg_mode = LNW_DMA_MEM_TO_PER;
dws->txchan->private = txs;
dws->dma_inited = 1;
return 0;
free_rxchan:
dma_release_channel(dws->rxchan);
err_exit:
return -1;
}
static void mid_spi_dma_exit(struct dw_spi *dws)
{
dma_release_channel(dws->txchan);
dma_release_channel(dws->rxchan);
}
/*
* dws->dma_chan_done is cleared before the dma transfer starts,
* callback for rx/tx channel will each increment it by 1.
* Reaching 2 means the whole spi transaction is done.
*/
static void dw_spi_dma_done(void *arg)
{
struct dw_spi *dws = arg;
if (++dws->dma_chan_done != 2)
return;
dw_spi_xfer_done(dws);
}
static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
{
struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
struct dma_chan *txchan, *rxchan;
struct dma_slave_config txconf, rxconf;
u16 dma_ctrl = 0;
/* 1. setup DMA related registers */
if (cs_change) {
spi_enable_chip(dws, 0);
dw_writew(dws, dmardlr, 0xf);
dw_writew(dws, dmatdlr, 0x10);
if (dws->tx_dma)
dma_ctrl |= 0x2;
if (dws->rx_dma)
dma_ctrl |= 0x1;
dw_writew(dws, dmacr, dma_ctrl);
spi_enable_chip(dws, 1);
}
dws->dma_chan_done = 0;
txchan = dws->txchan;
rxchan = dws->rxchan;
/* 2. Prepare the TX dma transfer */
txconf.direction = DMA_TO_DEVICE;
txconf.dst_addr = dws->dma_addr;
txconf.dst_maxburst = LNW_DMA_MSIZE_16;
txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
(unsigned long) &txconf);
memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
dws->tx_sgl.dma_address = dws->tx_dma;
dws->tx_sgl.length = dws->len;
txdesc = txchan->device->device_prep_slave_sg(txchan,
&dws->tx_sgl,
1,
DMA_TO_DEVICE,
DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
txdesc->callback = dw_spi_dma_done;
txdesc->callback_param = dws;
/* 3. Prepare the RX dma transfer */
rxconf.direction = DMA_FROM_DEVICE;
rxconf.src_addr = dws->dma_addr;
rxconf.src_maxburst = LNW_DMA_MSIZE_16;
rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
(unsigned long) &rxconf);
memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
dws->rx_sgl.dma_address = dws->rx_dma;
dws->rx_sgl.length = dws->len;
rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
&dws->rx_sgl,
1,
DMA_FROM_DEVICE,
DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
rxdesc->callback = dw_spi_dma_done;
rxdesc->callback_param = dws;
/* rx must be started before tx due to spi instinct */
rxdesc->tx_submit(rxdesc);
txdesc->tx_submit(txdesc);
return 0;
}
static struct dw_spi_dma_ops mid_dma_ops = {
.dma_init = mid_spi_dma_init,
.dma_exit = mid_spi_dma_exit,
.dma_transfer = mid_spi_dma_transfer,
};
#endif
/* Some specific info for SPI0 controller on Moorestown */
/* HW info for MRST CLk Control Unit, one 32b reg */
#define MRST_SPI_CLK_BASE 100000000 /* 100m */
#define MRST_CLK_SPI0_REG 0xff11d86c
#define CLK_SPI_BDIV_OFFSET 0
#define CLK_SPI_BDIV_MASK 0x00000007
#define CLK_SPI_CDIV_OFFSET 9
#define CLK_SPI_CDIV_MASK 0x00000e00
#define CLK_SPI_DISABLE_OFFSET 8
int dw_spi_mid_init(struct dw_spi *dws)
{
u32 *clk_reg, clk_cdiv;
clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
if (!clk_reg)
return -ENOMEM;
/* get SPI controller operating freq info */
clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
iounmap(clk_reg);
dws->num_cs = 16;
dws->fifo_len = 40; /* FIFO has 40 words buffer */
#ifdef CONFIG_SPI_DW_MID_DMA
dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
if (!dws->dma_priv)
return -ENOMEM;
dws->dma_ops = &mid_dma_ops;
#endif
return 0;
}
/*
* mrst_spi_pci.c - PCI interface driver for DW SPI Core
* dw_spi_pci.c - PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, Intel Corporation.
*
......@@ -26,8 +26,8 @@
#define DRIVER_NAME "dw_spi_pci"
struct dw_spi_pci {
struct pci_dev *pdev;
struct dw_spi dws;
struct pci_dev *pdev;
struct dw_spi dws;
};
static int __devinit spi_pci_probe(struct pci_dev *pdev,
......@@ -72,9 +72,17 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev,
dws->parent_dev = &pdev->dev;
dws->bus_num = 0;
dws->num_cs = 4;
dws->max_freq = 25000000; /* for Moorestwon */
dws->irq = pdev->irq;
dws->fifo_len = 40; /* FIFO has 40 words buffer */
/*
* Specific handling for Intel MID paltforms, like dma setup,
* clock rate, FIFO depth.
*/
if (pdev->device == 0x0800) {
ret = dw_spi_mid_init(dws);
if (ret)
goto err_unmap;
}
ret = dw_spi_add_host(dws);
if (ret)
......@@ -140,7 +148,7 @@ static int spi_resume(struct pci_dev *pdev)
#endif
static const struct pci_device_id pci_ids[] __devinitdata = {
/* Intel Moorestown platform SPI controller 0 */
/* Intel MID platform SPI controller 0 */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
{},
};
......
......@@ -363,7 +363,7 @@ static irqreturn_t mpc52xx_psc_spi_isr(int irq, void *dev_id)
}
/* bus_num is used only for the case dev->platform_data == NULL */
static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
static int __devinit mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
u32 size, unsigned int irq, s16 bus_num)
{
struct fsl_spi_platform_data *pdata = dev->platform_data;
......@@ -450,22 +450,7 @@ static int __init mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
return ret;
}
static int __exit mpc52xx_psc_spi_do_remove(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
flush_workqueue(mps->workqueue);
destroy_workqueue(mps->workqueue);
spi_unregister_master(master);
free_irq(mps->irq, mps);
if (mps->psc)
iounmap(mps->psc);
return 0;
}
static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
static int __devinit mpc52xx_psc_spi_of_probe(struct platform_device *op,
const struct of_device_id *match)
{
const u32 *regaddr_p;
......@@ -495,9 +480,19 @@ static int __init mpc52xx_psc_spi_of_probe(struct platform_device *op,
irq_of_parse_and_map(op->dev.of_node, 0), id);
}
static int __exit mpc52xx_psc_spi_of_remove(struct platform_device *op)
static int __devexit mpc52xx_psc_spi_of_remove(struct platform_device *op)
{
return mpc52xx_psc_spi_do_remove(&op->dev);
struct spi_master *master = dev_get_drvdata(&op->dev);
struct mpc52xx_psc_spi *mps = spi_master_get_devdata(master);
flush_workqueue(mps->workqueue);
destroy_workqueue(mps->workqueue);
spi_unregister_master(master);
free_irq(mps->irq, mps);
if (mps->psc)
iounmap(mps->psc);
return 0;
}
static const struct of_device_id mpc52xx_psc_spi_of_match[] = {
......@@ -510,7 +505,7 @@ MODULE_DEVICE_TABLE(of, mpc52xx_psc_spi_of_match);
static struct of_platform_driver mpc52xx_psc_spi_of_driver = {
.probe = mpc52xx_psc_spi_of_probe,
.remove = __exit_p(mpc52xx_psc_spi_of_remove),
.remove = __devexit_p(mpc52xx_psc_spi_of_remove),
.driver = {
.name = "mpc52xx-psc-spi",
.owner = THIS_MODULE,
......
......@@ -397,7 +397,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (tx != NULL) {
wait_for_completion(&mcspi_dma->dma_tx_completion);
dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE);
dma_unmap_single(&spi->dev, xfer->tx_dma, count, DMA_TO_DEVICE);
/* for TX_ONLY mode, be sure all words have shifted out */
if (rx == NULL) {
......@@ -412,7 +412,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
if (rx != NULL) {
wait_for_completion(&mcspi_dma->dma_rx_completion);
dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
dma_unmap_single(&spi->dev, xfer->rx_dma, count, DMA_FROM_DEVICE);
omap2_mcspi_set_enable(spi, 0);
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
......@@ -1025,11 +1025,6 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
if (m->is_dma_mapped || len < DMA_MIN_BYTES)
continue;
/* Do DMA mapping "early" for better error reporting and
* dcache use. Note that if dma_unmap_single() ever starts
* to do real work on ARM, we'd need to clean up mappings
* for previous transfers on *ALL* exits of this loop...
*/
if (tx_buf != NULL) {
t->tx_dma = dma_map_single(&spi->dev, (void *) tx_buf,
len, DMA_TO_DEVICE);
......@@ -1046,7 +1041,7 @@ static int omap2_mcspi_transfer(struct spi_device *spi, struct spi_message *m)
dev_dbg(&spi->dev, "dma %cX %d bytes error\n",
'R', len);
if (tx_buf != NULL)
dma_unmap_single(NULL, t->tx_dma,
dma_unmap_single(&spi->dev, t->tx_dma,
len, DMA_TO_DEVICE);
return -EINVAL;
}
......
This diff is collapsed.
/*
* CE4100's SPI device is more or less the same one as found on PXA
*
*/
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/spi/pxa2xx_spi.h>
struct awesome_struct {
struct ssp_device ssp;
struct platform_device spi_pdev;
struct pxa2xx_spi_master spi_pdata;
};
static DEFINE_MUTEX(ssp_lock);
static LIST_HEAD(ssp_list);
struct ssp_device *pxa_ssp_request(int port, const char *label)
{
struct ssp_device *ssp = NULL;
mutex_lock(&ssp_lock);
list_for_each_entry(ssp, &ssp_list, node) {
if (ssp->port_id == port && ssp->use_count == 0) {
ssp->use_count++;
ssp->label = label;
break;
}
}
mutex_unlock(&ssp_lock);
if (&ssp->node == &ssp_list)
return NULL;
return ssp;
}
EXPORT_SYMBOL_GPL(pxa_ssp_request);
void pxa_ssp_free(struct ssp_device *ssp)
{
mutex_lock(&ssp_lock);
if (ssp->use_count) {
ssp->use_count--;
ssp->label = NULL;
} else
dev_err(&ssp->pdev->dev, "device already free\n");
mutex_unlock(&ssp_lock);
}
EXPORT_SYMBOL_GPL(pxa_ssp_free);
static void plat_dev_release(struct device *dev)
{
struct awesome_struct *as = container_of(dev,
struct awesome_struct, spi_pdev.dev);
of_device_node_put(&as->spi_pdev.dev);
}
static int __devinit ce4100_spi_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
int ret;
resource_size_t phys_beg;
resource_size_t phys_len;
struct awesome_struct *spi_info;
struct platform_device *pdev;
struct pxa2xx_spi_master *spi_pdata;
struct ssp_device *ssp;
ret = pci_enable_device(dev);
if (ret)
return ret;
phys_beg = pci_resource_start(dev, 0);
phys_len = pci_resource_len(dev, 0);
if (!request_mem_region(phys_beg, phys_len,
"CE4100 SPI")) {
dev_err(&dev->dev, "Can't request register space.\n");
ret = -EBUSY;
return ret;
}
spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
if (!spi_info) {
ret = -ENOMEM;
goto err_kz;
}
ssp = &spi_info->ssp;
pdev = &spi_info->spi_pdev;
spi_pdata = &spi_info->spi_pdata;
pdev->name = "pxa2xx-spi";
pdev->id = dev->devfn;
pdev->dev.parent = &dev->dev;
pdev->dev.platform_data = &spi_info->spi_pdata;
#ifdef CONFIG_OF
pdev->dev.of_node = dev->dev.of_node;
#endif
pdev->dev.release = plat_dev_release;
spi_pdata->num_chipselect = dev->devfn;
ssp->phys_base = pci_resource_start(dev, 0);
ssp->mmio_base = ioremap(phys_beg, phys_len);
if (!ssp->mmio_base) {
dev_err(&pdev->dev, "failed to ioremap() registers\n");
ret = -EIO;
goto err_remap;
}
ssp->irq = dev->irq;
ssp->port_id = pdev->id;
ssp->type = PXA25x_SSP;
mutex_lock(&ssp_lock);
list_add(&ssp->node, &ssp_list);
mutex_unlock(&ssp_lock);
pci_set_drvdata(dev, spi_info);
ret = platform_device_register(pdev);
if (ret)
goto err_dev_add;
return ret;
err_dev_add:
pci_set_drvdata(dev, NULL);
mutex_lock(&ssp_lock);
list_del(&ssp->node);
mutex_unlock(&ssp_lock);
iounmap(ssp->mmio_base);
err_remap:
kfree(spi_info);
err_kz:
release_mem_region(phys_beg, phys_len);
return ret;
}
static void __devexit ce4100_spi_remove(struct pci_dev *dev)
{
struct awesome_struct *spi_info;
struct platform_device *pdev;
struct ssp_device *ssp;
spi_info = pci_get_drvdata(dev);
ssp = &spi_info->ssp;
pdev = &spi_info->spi_pdev;
platform_device_unregister(pdev);
iounmap(ssp->mmio_base);
release_mem_region(pci_resource_start(dev, 0),
pci_resource_len(dev, 0));
mutex_lock(&ssp_lock);
list_del(&ssp->node);
mutex_unlock(&ssp_lock);
pci_set_drvdata(dev, NULL);
pci_disable_device(dev);
kfree(spi_info);
}
static struct pci_device_id ce4100_spi_devices[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e6a) },
{ },
};
MODULE_DEVICE_TABLE(pci, ce4100_spi_devices);
static struct pci_driver ce4100_spi_driver = {
.name = "ce4100_spi",
.id_table = ce4100_spi_devices,
.probe = ce4100_spi_probe,
.remove = __devexit_p(ce4100_spi_remove),
};
static int __init ce4100_spi_init(void)
{
return pci_register_driver(&ce4100_spi_driver);
}
module_init(ce4100_spi_init);
static void __exit ce4100_spi_exit(void)
{
pci_unregister_driver(&ce4100_spi_driver);
}
module_exit(ce4100_spi_exit);
MODULE_DESCRIPTION("CE4100 PCI-SPI glue code for PXA's driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
......@@ -66,7 +66,6 @@ enum spi_imx_devtype {
SPI_IMX_VER_0_5,
SPI_IMX_VER_0_7,
SPI_IMX_VER_2_3,
SPI_IMX_VER_AUTODETECT,
};
struct spi_imx_data;
......@@ -720,9 +719,6 @@ static void spi_imx_cleanup(struct spi_device *spi)
static struct platform_device_id spi_imx_devtype[] = {
{
.name = DRIVER_NAME,
.driver_data = SPI_IMX_VER_AUTODETECT,
}, {
.name = "imx1-cspi",
.driver_data = SPI_IMX_VER_IMX1,
}, {
......@@ -802,30 +798,8 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
init_completion(&spi_imx->xfer_done);
if (pdev->id_entry->driver_data == SPI_IMX_VER_AUTODETECT) {
if (cpu_is_mx25() || cpu_is_mx35())
spi_imx->devtype_data =
spi_imx_devtype_data[SPI_IMX_VER_0_7];
else if (cpu_is_mx25() || cpu_is_mx31() || cpu_is_mx35())
spi_imx->devtype_data =
spi_imx_devtype_data[SPI_IMX_VER_0_4];
else if (cpu_is_mx27() || cpu_is_mx21())
spi_imx->devtype_data =
spi_imx_devtype_data[SPI_IMX_VER_0_0];
else if (cpu_is_mx1())
spi_imx->devtype_data =
spi_imx_devtype_data[SPI_IMX_VER_IMX1];
else
BUG();
} else
spi_imx->devtype_data =
spi_imx_devtype_data[pdev->id_entry->driver_data];
if (!spi_imx->devtype_data.intctrl) {
dev_err(&pdev->dev, "no support for this device compiled in\n");
ret = -ENODEV;
goto out_gpio_free;
}
spi_imx->devtype_data =
spi_imx_devtype_data[pdev->id_entry->driver_data];
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
......@@ -847,7 +821,7 @@ static int __devinit spi_imx_probe(struct platform_device *pdev)
}
spi_imx->irq = platform_get_irq(pdev, 0);
if (spi_imx->irq <= 0) {
if (spi_imx->irq < 0) {
ret = -EINVAL;
goto out_iounmap;
}
......
......@@ -449,7 +449,7 @@ static int __devinit nuc900_spi_probe(struct platform_device *pdev)
release_mem_region(hw->res->start, resource_size(hw->res));
kfree(hw->ioarea);
err_pdata:
spi_master_put(hw->master);;
spi_master_put(hw->master);
err_nomem:
return err;
......
......@@ -267,7 +267,7 @@ static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val,
if (reg_spsr_val & SPSR_FI_BIT) {
/* disable FI & RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
SPCR_FIE_BIT | SPCR_TFIE_BIT);
SPCR_FIE_BIT | SPCR_RFIE_BIT);
/* transfer is completed;inform pch_spi_process_messages */
data->transfer_complete = true;
......@@ -677,15 +677,15 @@ static void pch_spi_set_ir(struct pch_spi_data *data)
{
/* enable interrupts */
if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) {
/* set receive threhold to PCH_RX_THOLD */
/* set receive threshold to PCH_RX_THOLD */
pch_spi_setclr_reg(data->master, PCH_SPCR,
PCH_RX_THOLD << SPCR_TFIC_FIELD,
~MASK_TFIC_SPCR_BITS);
PCH_RX_THOLD << SPCR_RFIC_FIELD,
~MASK_RFIC_SPCR_BITS);
/* enable FI and RFI interrupts */
pch_spi_setclr_reg(data->master, PCH_SPCR,
SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0);
SPCR_RFIE_BIT | SPCR_FIE_BIT, 0);
} else {
/* set receive threhold to maximum */
/* set receive threshold to maximum */
pch_spi_setclr_reg(data->master, PCH_SPCR,
PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD,
~MASK_TFIC_SPCR_BITS);
......
/*
* xilinx_spi.c
*
* Xilinx SPI controller driver (master mode only)
*
* Author: MontaVista Software, Inc.
* source@mvista.com
*
* 2002-2007 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is licensed
* "as is" without any warranty of any kind, whether express or implied.
* Copyright (c) 2010 Secret Lab Technologies, Ltd.
* Copyright (c) 2009 Intel Corporation
* 2002-2007 (c) MontaVista Software, Inc.
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/io.h>
#include "xilinx_spi.h"
#include <linux/spi/xilinx_spi.h>
#include <linux/io.h>
#define XILINX_SPI_NAME "xilinx_spi"
......@@ -350,19 +351,22 @@ static irqreturn_t xilinx_spi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
#ifdef CONFIG_OF
static const struct of_device_id xilinx_spi_of_match[] = {
{ .compatible = "xlnx,xps-spi-2.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.b", },
{}
};
MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
#endif
struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
u32 irq, s16 bus_num)
u32 irq, s16 bus_num, int num_cs, int little_endian, int bits_per_word)
{
struct spi_master *master;
struct xilinx_spi *xspi;
struct xspi_platform_data *pdata = dev->platform_data;
int ret;
if (!pdata) {
dev_err(dev, "No platform data attached\n");
return NULL;
}
master = spi_alloc_master(dev, sizeof(struct xilinx_spi));
if (!master)
return NULL;
......@@ -389,21 +393,21 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
}
master->bus_num = bus_num;
master->num_chipselect = pdata->num_chipselect;
master->num_chipselect = num_cs;
#ifdef CONFIG_OF
master->dev.of_node = dev->of_node;
#endif
xspi->mem = *mem;
xspi->irq = irq;
if (pdata->little_endian) {
if (little_endian) {
xspi->read_fn = xspi_read32;
xspi->write_fn = xspi_write32;
} else {
xspi->read_fn = xspi_read32_be;
xspi->write_fn = xspi_write32_be;
}
xspi->bits_per_word = pdata->bits_per_word;
xspi->bits_per_word = bits_per_word;
if (xspi->bits_per_word == 8) {
xspi->tx_fn = xspi_tx8;
xspi->rx_fn = xspi_rx8;
......@@ -462,6 +466,97 @@ void xilinx_spi_deinit(struct spi_master *master)
}
EXPORT_SYMBOL(xilinx_spi_deinit);
static int __devinit xilinx_spi_probe(struct platform_device *dev)
{
struct xspi_platform_data *pdata;
struct resource *r;
int irq, num_cs = 0, little_endian = 0, bits_per_word = 8;
struct spi_master *master;
u8 i;
pdata = dev->dev.platform_data;
if (pdata) {
num_cs = pdata->num_chipselect;
little_endian = pdata->little_endian;
bits_per_word = pdata->bits_per_word;
}
#ifdef CONFIG_OF
if (dev->dev.of_node) {
const __be32 *prop;
int len;
/* number of slave select bits is required */
prop = of_get_property(dev->dev.of_node, "xlnx,num-ss-bits",
&len);
if (prop && len >= sizeof(*prop))
num_cs = __be32_to_cpup(prop);
}
#endif
if (!num_cs) {
dev_err(&dev->dev, "Missing slave select configuration data\n");
return -EINVAL;
}
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!r)
return -ENODEV;
irq = platform_get_irq(dev, 0);
if (irq < 0)
return -ENXIO;
master = xilinx_spi_init(&dev->dev, r, irq, dev->id, num_cs,
little_endian, bits_per_word);
if (!master)
return -ENODEV;
if (pdata) {
for (i = 0; i < pdata->num_devices; i++)
spi_new_device(master, pdata->devices + i);
}
platform_set_drvdata(dev, master);
return 0;
}
static int __devexit xilinx_spi_remove(struct platform_device *dev)
{
xilinx_spi_deinit(platform_get_drvdata(dev));
platform_set_drvdata(dev, 0);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:" XILINX_SPI_NAME);
static struct platform_driver xilinx_spi_driver = {
.probe = xilinx_spi_probe,
.remove = __devexit_p(xilinx_spi_remove),
.driver = {
.name = XILINX_SPI_NAME,
.owner = THIS_MODULE,
#ifdef CONFIG_OF
.of_match_table = xilinx_spi_of_match,
#endif
},
};
static int __init xilinx_spi_pltfm_init(void)
{
return platform_driver_register(&xilinx_spi_driver);
}
module_init(xilinx_spi_pltfm_init);
static void __exit xilinx_spi_pltfm_exit(void)
{
platform_driver_unregister(&xilinx_spi_driver);
}
module_exit(xilinx_spi_pltfm_exit);
MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
MODULE_DESCRIPTION("Xilinx SPI driver");
MODULE_LICENSE("GPL");
/*
* Xilinx SPI device driver API and platform data header file
*
* Copyright (c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _XILINX_SPI_H_
#define _XILINX_SPI_H_
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#define XILINX_SPI_NAME "xilinx_spi"
struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
u32 irq, s16 bus_num);
void xilinx_spi_deinit(struct spi_master *master);
#endif
/*
* Xilinx SPI OF device driver
*
* Copyright (c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
* Xilinx SPI devices as OF devices
*
* Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/of_spi.h>
#include <linux/spi/xilinx_spi.h>
#include "xilinx_spi.h"
static int __devinit xilinx_spi_of_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct spi_master *master;
struct xspi_platform_data *pdata;
struct resource r_mem;
struct resource r_irq;
int rc = 0;
const u32 *prop;
int len;
rc = of_address_to_resource(ofdev->dev.of_node, 0, &r_mem);
if (rc) {
dev_warn(&ofdev->dev, "invalid address\n");
return rc;
}
rc = of_irq_to_resource(ofdev->dev.of_node, 0, &r_irq);
if (rc == NO_IRQ) {
dev_warn(&ofdev->dev, "no IRQ found\n");
return -ENODEV;
}
ofdev->dev.platform_data =
kzalloc(sizeof(struct xspi_platform_data), GFP_KERNEL);
pdata = ofdev->dev.platform_data;
if (!pdata)
return -ENOMEM;
/* number of slave select bits is required */
prop = of_get_property(ofdev->dev.of_node, "xlnx,num-ss-bits", &len);
if (!prop || len < sizeof(*prop)) {
dev_warn(&ofdev->dev, "no 'xlnx,num-ss-bits' property\n");
return -EINVAL;
}
pdata->num_chipselect = *prop;
pdata->bits_per_word = 8;
master = xilinx_spi_init(&ofdev->dev, &r_mem, r_irq.start, -1);
if (!master)
return -ENODEV;
dev_set_drvdata(&ofdev->dev, master);
return 0;
}
static int __devexit xilinx_spi_remove(struct platform_device *ofdev)
{
xilinx_spi_deinit(dev_get_drvdata(&ofdev->dev));
dev_set_drvdata(&ofdev->dev, 0);
kfree(ofdev->dev.platform_data);
ofdev->dev.platform_data = NULL;
return 0;
}
static int __exit xilinx_spi_of_remove(struct platform_device *op)
{
return xilinx_spi_remove(op);
}
static const struct of_device_id xilinx_spi_of_match[] = {
{ .compatible = "xlnx,xps-spi-2.00.a", },
{ .compatible = "xlnx,xps-spi-2.00.b", },
{}
};
MODULE_DEVICE_TABLE(of, xilinx_spi_of_match);
static struct of_platform_driver xilinx_spi_of_driver = {
.probe = xilinx_spi_of_probe,
.remove = __exit_p(xilinx_spi_of_remove),
.driver = {
.name = "xilinx-xps-spi",
.owner = THIS_MODULE,
.of_match_table = xilinx_spi_of_match,
},
};
static int __init xilinx_spi_of_init(void)
{
return of_register_platform_driver(&xilinx_spi_of_driver);
}
module_init(xilinx_spi_of_init);
static void __exit xilinx_spi_of_exit(void)
{
of_unregister_platform_driver(&xilinx_spi_of_driver);
}
module_exit(xilinx_spi_of_exit);
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_DESCRIPTION("Xilinx SPI platform driver");
MODULE_LICENSE("GPL v2");
/*
* Support for Xilinx SPI platform devices
* Copyright (c) 2009 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Supports:
* Xilinx SPI devices as platform devices
*
* Inspired by xilinx_spi.c, 2002-2007 (c) MontaVista Software, Inc.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
#include <linux/spi/xilinx_spi.h>
#include "xilinx_spi.h"
static int __devinit xilinx_spi_probe(struct platform_device *dev)
{
struct xspi_platform_data *pdata;
struct resource *r;
int irq;
struct spi_master *master;
u8 i;
pdata = dev->dev.platform_data;
if (!pdata)
return -ENODEV;
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!r)
return -ENODEV;
irq = platform_get_irq(dev, 0);
if (irq < 0)
return -ENXIO;
master = xilinx_spi_init(&dev->dev, r, irq, dev->id);
if (!master)
return -ENODEV;
for (i = 0; i < pdata->num_devices; i++)
spi_new_device(master, pdata->devices + i);
platform_set_drvdata(dev, master);
return 0;
}
static int __devexit xilinx_spi_remove(struct platform_device *dev)
{
xilinx_spi_deinit(platform_get_drvdata(dev));
platform_set_drvdata(dev, 0);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:" XILINX_SPI_NAME);
static struct platform_driver xilinx_spi_driver = {
.probe = xilinx_spi_probe,
.remove = __devexit_p(xilinx_spi_remove),
.driver = {
.name = XILINX_SPI_NAME,
.owner = THIS_MODULE,
},
};
static int __init xilinx_spi_pltfm_init(void)
{
return platform_driver_register(&xilinx_spi_driver);
}
module_init(xilinx_spi_pltfm_init);
static void __exit xilinx_spi_pltfm_exit(void)
{
platform_driver_unregister(&xilinx_spi_driver);
}
module_exit(xilinx_spi_pltfm_exit);
MODULE_AUTHOR("Mocean Laboratories <info@mocean-labs.com>");
MODULE_DESCRIPTION("Xilinx SPI platform driver");
MODULE_LICENSE("GPL v2");
/*
* ssp.h
* pxa2xx_ssp.h
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
*
......@@ -16,8 +16,8 @@
* PXA3xx SSP1, SSP2, SSP3, SSP4
*/
#ifndef __ASM_ARCH_SSP_H
#define __ASM_ARCH_SSP_H
#ifndef __LINUX_SSP_H
#define __LINUX_SSP_H
#include <linux/list.h>
#include <linux/io.h>
......@@ -71,11 +71,8 @@
#define SSCR1_SPO (1 << 3) /* Motorola SPI SSPSCLK polarity setting */
#define SSCR1_SPH (1 << 4) /* Motorola SPI SSPSCLK phase setting */
#define SSCR1_MWDS (1 << 5) /* Microwire Transmit Data Size */
#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
#define SSSR_ALT_FRM_MASK 3 /* Masks the SFRM signal number */
#define SSSR_TNF (1 << 2) /* Transmit FIFO Not Full */
#define SSSR_RNE (1 << 3) /* Receive FIFO Not Empty */
#define SSSR_BSY (1 << 4) /* SSP Busy */
......@@ -83,6 +80,31 @@
#define SSSR_RFS (1 << 6) /* Receive FIFO Service Request */
#define SSSR_ROR (1 << 7) /* Receive FIFO Overrun */
#ifdef CONFIG_ARCH_PXA
#define RX_THRESH_DFLT 8
#define TX_THRESH_DFLT 8
#define SSSR_TFL_MASK (0xf << 8) /* Transmit FIFO Level mask */
#define SSSR_RFL_MASK (0xf << 12) /* Receive FIFO Level mask */
#define SSCR1_TFT (0x000003c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
#define SSCR1_RFT (0x00003c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
#else
#define RX_THRESH_DFLT 2
#define TX_THRESH_DFLT 2
#define SSSR_TFL_MASK (0x3 << 8) /* Transmit FIFO Level mask */
#define SSSR_RFL_MASK (0x3 << 12) /* Receive FIFO Level mask */
#define SSCR1_TFT (0x000000c0) /* Transmit FIFO Threshold (mask) */
#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..4] */
#define SSCR1_RFT (0x00000c00) /* Receive FIFO Threshold (mask) */
#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..4] */
#endif
/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
#define SSCR0_TISSP (1 << 4) /* TI Sync Serial Protocol */
......@@ -139,6 +161,7 @@ enum pxa_ssp_type {
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
PXA168_SSP,
CE4100_SSP,
};
struct ssp_device {
......@@ -183,4 +206,4 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
#endif /* __ASM_ARCH_SSP_H */
#endif
#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H
#include <linux/io.h>
/* Bit fields in CTRLR0 */
......@@ -82,6 +83,13 @@ struct dw_spi_reg {
though only low 16 bits matters */
} __packed;
struct dw_spi;
struct dw_spi_dma_ops {
int (*dma_init)(struct dw_spi *dws);
void (*dma_exit)(struct dw_spi *dws);
int (*dma_transfer)(struct dw_spi *dws, int cs_change);
};
struct dw_spi {
struct spi_master *master;
struct spi_device *cur_dev;
......@@ -136,13 +144,15 @@ struct dw_spi {
/* Dma info */
int dma_inited;
struct dma_chan *txchan;
struct scatterlist tx_sgl;
struct dma_chan *rxchan;
int txdma_done;
int rxdma_done;
u64 tx_param;
u64 rx_param;
struct scatterlist rx_sgl;
int dma_chan_done;
struct device *dma_dev;
dma_addr_t dma_addr;
dma_addr_t dma_addr; /* phy address of the Data register */
struct dw_spi_dma_ops *dma_ops;
void *dma_priv; /* platform relate info */
struct pci_dev *dmac;
/* Bus interface info */
void *priv;
......@@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws);
extern void dw_spi_remove_host(struct dw_spi *dws);
extern int dw_spi_suspend_host(struct dw_spi *dws);
extern int dw_spi_resume_host(struct dw_spi *dws);
extern void dw_spi_xfer_done(struct dw_spi *dws);
/* platform related setup */
extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
#endif /* DW_SPI_HEADER_H */
/*
* Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __linux_pxa2xx_spi_h
#define __linux_pxa2xx_spi_h
#include <linux/pxa2xx_ssp.h>
#define PXA2XX_CS_ASSERT (0x01)
#define PXA2XX_CS_DEASSERT (0x02)
/* device.platform_data for SSP controller devices */
struct pxa2xx_spi_master {
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
};
/* spi_board_info.controller_data for SPI slave devices,
* copied to spi_device.platform_data ... mostly for dma tuning
*/
struct pxa2xx_spi_chip {
u8 tx_threshold;
u8 rx_threshold;
u8 dma_burst_size;
u32 timeout;
u8 enable_loopback;
int gpio_cs;
void (*cs_control)(u32 command);
};
#ifdef CONFIG_ARCH_PXA
#include <linux/clk.h>
#include <mach/dma.h>
extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
#else
/*
* This is the implemtation for CE4100 on x86. ARM defines them in mach/ or
* plat/ include path.
* The CE4100 does not provide DMA support. This bits are here to let the driver
* compile and will never be used. Maybe we get DMA support at a later point in
* time.
*/
#define DCSR(n) (n)
#define DSADR(n) (n)
#define DTADR(n) (n)
#define DCMD(n) (n)
#define DRCMR(n) (n)
#define DCSR_RUN (1 << 31) /* Run Bit */
#define DCSR_NODESC (1 << 30) /* No-Descriptor Fetch */
#define DCSR_STOPIRQEN (1 << 29) /* Stop Interrupt Enable */
#define DCSR_REQPEND (1 << 8) /* Request Pending (read-only) */
#define DCSR_STOPSTATE (1 << 3) /* Stop State (read-only) */
#define DCSR_ENDINTR (1 << 2) /* End Interrupt */
#define DCSR_STARTINTR (1 << 1) /* Start Interrupt */
#define DCSR_BUSERR (1 << 0) /* Bus Error Interrupt */
#define DCSR_EORIRQEN (1 << 28) /* End of Receive Interrupt Enable */
#define DCSR_EORJMPEN (1 << 27) /* Jump to next descriptor on EOR */
#define DCSR_EORSTOPEN (1 << 26) /* STOP on an EOR */
#define DCSR_SETCMPST (1 << 25) /* Set Descriptor Compare Status */
#define DCSR_CLRCMPST (1 << 24) /* Clear Descriptor Compare Status */
#define DCSR_CMPST (1 << 10) /* The Descriptor Compare Status */
#define DCSR_EORINTR (1 << 9) /* The end of Receive */
#define DRCMR_MAPVLD (1 << 7) /* Map Valid */
#define DRCMR_CHLNUM 0x1f /* mask for Channel Number */
#define DDADR_DESCADDR 0xfffffff0 /* Address of next descriptor */
#define DDADR_STOP (1 << 0) /* Stop */
#define DCMD_INCSRCADDR (1 << 31) /* Source Address Increment Setting. */
#define DCMD_INCTRGADDR (1 << 30) /* Target Address Increment Setting. */
#define DCMD_FLOWSRC (1 << 29) /* Flow Control by the source. */
#define DCMD_FLOWTRG (1 << 28) /* Flow Control by the target. */
#define DCMD_STARTIRQEN (1 << 22) /* Start Interrupt Enable */
#define DCMD_ENDIRQEN (1 << 21) /* End Interrupt Enable */
#define DCMD_ENDIAN (1 << 18) /* Device Endian-ness. */
#define DCMD_BURST8 (1 << 16) /* 8 byte burst */
#define DCMD_BURST16 (2 << 16) /* 16 byte burst */
#define DCMD_BURST32 (3 << 16) /* 32 byte burst */
#define DCMD_WIDTH1 (1 << 14) /* 1 byte width */
#define DCMD_WIDTH2 (2 << 14) /* 2 byte width (HalfWord) */
#define DCMD_WIDTH4 (3 << 14) /* 4 byte width (Word) */
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
/*
* Descriptor structure for PXA's DMA engine
* Note: this structure must always be aligned to a 16-byte boundary.
*/
typedef enum {
DMA_PRIO_HIGH = 0,
DMA_PRIO_MEDIUM = 1,
DMA_PRIO_LOW = 2
} pxa_dma_prio;
/*
* DMA registration
*/
static inline int pxa_request_dma(char *name,
pxa_dma_prio prio,
void (*irq_handler)(int, void *),
void *data)
{
return -ENODEV;
}
static inline void pxa_free_dma(int dma_ch)
{
}
/*
* The CE4100 does not have the clk framework implemented and SPI clock can
* not be switched on/off or the divider changed.
*/
static inline void clk_disable(struct clk *clk)
{
}
static inline int clk_enable(struct clk *clk)
{
return 0;
}
static inline unsigned long clk_get_rate(struct clk *clk)
{
return 3686400;
}
#endif
#endif
......@@ -20,6 +20,7 @@
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pxa2xx_ssp.h>
#include <asm/irq.h>
......@@ -33,7 +34,6 @@
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/audio.h>
#include <plat/ssp.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment