Commit 023e4163 authored by Patrick Havelange's avatar Patrick Havelange Committed by Jonathan Cameron

dt-bindings: iio/temperature: Add thermocouple types (and doc)

This patch introduces common thermocouple types used by various
temperature sensors. Also a brief documentation explaining this
"thermocouple-type" property.
Signed-off-by: default avatarPatrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent 52f171ab
If the temperature sensor device can be configured to use some specific
thermocouple type, you can use the defined types provided in the file
"include/dt-bindings/iio/temperature/thermocouple.h".
Property:
thermocouple-type: A single cell representing the type of the thermocouple
used by the device.
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _DT_BINDINGS_TEMPERATURE_THERMOCOUPLE_H
#define _DT_BINDINGS_TEMPERATURE_THERMOCOUPLE_H
#define THERMOCOUPLE_TYPE_B 0x00
#define THERMOCOUPLE_TYPE_E 0x01
#define THERMOCOUPLE_TYPE_J 0x02
#define THERMOCOUPLE_TYPE_K 0x03
#define THERMOCOUPLE_TYPE_N 0x04
#define THERMOCOUPLE_TYPE_R 0x05
#define THERMOCOUPLE_TYPE_S 0x06
#define THERMOCOUPLE_TYPE_T 0x07
#endif /* _DT_BINDINGS_TEMPERATURE_THERMOCOUPLE_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment