Commit 026ac677 authored by Greg Rose's avatar Greg Rose Committed by David S. Miller

ixgbe: Fix a bug in setting VF VLAN via PF

The PF driver does not check if the administrator has already set a VF
VLAN via the PF driver before setting the new VLAN.  This results in
the following scenario:

A) Administrator sets VF <n> to VLAN 100
B) Administrator sets VF <x> to VLAN 100
C) Administrator sets VF <n> to VLAN 200
D) The VF <n> driver continues to be able to receive traffic on VLAN
   100 because the VLVFB pool enable bit for that VF was left set
   instead of being cleared as it should be.

This fix ensures that the old VLAN filter for VF <n> is first removed
and the pool bit enable for VF <n> is cleared so that it no longer
receives traffic on VLAN 100.
Signed-off-by: default avatarGreg Rose <gregory.v.rose@intel.com>
Tested-by: default avatarSibai Li <sibai.li@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent f9d40f6a
......@@ -1049,6 +1049,12 @@ int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
return -EINVAL;
if (vlan || qos) {
if (adapter->vfinfo[vf].pf_vlan)
err = ixgbe_set_vf_vlan(adapter, false,
adapter->vfinfo[vf].pf_vlan,
vf);
if (err)
goto out;
err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
if (err)
goto out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment