Skip to content

L
linux
Commit 032c16b2 authored by Andi Kleen's avatar Andi Kleen Committed by Arnaldo Carvalho de Melo
Browse files
Options

perf vendor events intel: Update HaswellX events to V19 

Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
Link: https://lkml.kernel.org/r/20180118234518.GA27753@tassilo.jf.intel.comSigned-off-by: default avatarArnaldo Carvalho de Melo <acme@redhat.com>
parent ca3a2d05
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 991 additions and 931 deletions
tools/perf/pmu-events/arch/x86/haswellx/floating-point.json
View file @ 032c16b2
......@@ -19,6 +19,16 @@
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xC6",
"UMask": "0x7",
"BriefDescription": "Approximate counts of AVX & AVX2 256-bit instructions, including non-arithmetic instructions, loads, and stores. May count non-AVX instructions that employ 256-bit operations, including (but not necessarily limited to) rep string instructions that use 256-bit loads and stores for optimized performance, XSAVE* and XRSTOR*, and operations that transition the x87 FPU data registers between x87 and MMX.",
"Counter": "0,1,2,3",
"EventName": "AVX_INSTS.ALL",
"PublicDescription": "Note that a whole rep string only counts AVX_INST.ALL once.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0xCA",
"UMask": "0x2",
......@@ -69,15 +79,5 @@
"PublicDescription": "Cycles with any input/output SSE* or FP assists.",
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3"
},
{
"EventCode": "0xC6",
"UMask": "0x7",
"BriefDescription": "Approximate counts of AVX & AVX2 256-bit instructions, including non-arithmetic instructions, loads, and stores. May count non-AVX instructions that employ 256-bit operations, including (but not necessarily limited to) rep string instructions that use 256-bit loads and stores for optimized performance, XSAVE* and XRSTOR*, and operations that transition the x87 FPU data registers between x87 and MMX.",
"Counter": "0,1,2,3",
"EventName": "AVX_INSTS.ALL",
"PublicDescription": "Note that a whole rep string only counts AVX_INST.ALL once.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
}
]
\ No newline at end of file
tools/perf/pmu-events/arch/x86/haswellx/frontend.json
View file @ 032c16b2
......@@ -22,72 +22,41 @@
},
{
"EventCode": "0x79",
"UMask": "0x8",
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
"Counter": "0,1,2,3",
"EventName": "IDQ.DSB_UOPS",
"PublicDescription": "Increment each cycle. # of uops delivered to IDQ from DSB path. Set Cmask = 1 to count cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x10",
"BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_DSB_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by DSB. Set Cmask = 1 to count cycles. Add Edge=1 to count # of delivery.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x20",
"BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_MITE_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by MITE. Set Cmask = 1 to count cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"UMask": "0x4",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path.",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_UOPS",
"PublicDescription": "This event counts uops delivered by the Front-end with the assistance of the microcode sequencer. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance.",
"EventName": "IDQ.MITE_CYCLES",
"CounterMask": "1",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"UMask": "0x8",
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_CYCLES",
"CounterMask": "1",
"PublicDescription": "This event counts cycles during which the microcode sequencer assisted the Front-end in delivering uops. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance.",
"EventName": "IDQ.DSB_UOPS",
"PublicDescription": "Increment each cycle. # of uops delivered to IDQ from DSB path. Set Cmask = 1 to count cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x4",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path.",
"UMask": "0x8",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path.",
"Counter": "0,1,2,3",
"EventName": "IDQ.MITE_CYCLES",
"EventName": "IDQ.DSB_CYCLES",
"CounterMask": "1",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x8",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path.",
"UMask": "0x10",
"BriefDescription": "Uops initiated by Decode Stream Buffer (DSB) that are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.DSB_CYCLES",
"CounterMask": "1",
"EventName": "IDQ.MS_DSB_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by DSB. Set Cmask = 1 to count cycles. Add Edge=1 to count # of delivery.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
......@@ -134,6 +103,16 @@
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x20",
"BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_MITE_UOPS",
"PublicDescription": "Increment each cycle # of uops delivered to IDQ when MS_busy by MITE. Set Cmask = 1 to count cycles.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x24",
......@@ -156,6 +135,38 @@
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_UOPS",
"PublicDescription": "This event counts uops delivered by the Front-end with the assistance of the microcode sequencer. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_CYCLES",
"CounterMask": "1",
"PublicDescription": "This event counts cycles during which the microcode sequencer assisted the Front-end in delivering uops. Microcode assists are used for complex instructions or scenarios that can't be handled by the standard decoder. Using other instructions, if possible, will usually improve performance.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EdgeDetect": "1",
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_SWITCHES",
"CounterMask": "1",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x79",
"UMask": "0x3c",
......@@ -194,6 +205,15 @@
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x80",
"UMask": "0x4",
"BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction-cache miss.",
"Counter": "0,1,2,3",
"EventName": "ICACHE.IFDATA_STALL",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x9C",
"UMask": "0x1",
......@@ -270,25 +290,5 @@
"EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EdgeDetect": "1",
"EventCode": "0x79",
"UMask": "0x30",
"BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
"Counter": "0,1,2,3",
"EventName": "IDQ.MS_SWITCHES",
"CounterMask": "1",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x80",
"UMask": "0x4",
"BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction-cache miss.",
"Counter": "0,1,2,3",
"EventName": "ICACHE.IFDATA_STALL",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
}
]
\ No newline at end of file
tools/perf/pmu-events/arch/x86/haswellx/other.json
View file @ 032c16b2
......@@ -9,16 +9,6 @@
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x5C",
"UMask": "0x2",
"BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3",
"Counter": "0,1,2,3",
"EventName": "CPL_CYCLES.RING123",
"PublicDescription": "Unhalted core cycles when the thread is not in ring 0.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EdgeDetect": "1",
"EventCode": "0x5C",
......@@ -30,6 +20,16 @@
"SampleAfterValue": "100003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x5C",
"UMask": "0x2",
"BriefDescription": "Unhalted core cycles when thread is in rings 1, 2, or 3",
"Counter": "0,1,2,3",
"EventName": "CPL_CYCLES.RING123",
"PublicDescription": "Unhalted core cycles when the thread is not in ring 0.",
"SampleAfterValue": "2000003",
"CounterHTOff": "0,1,2,3,4,5,6,7"
},
{
"EventCode": "0x63",
"UMask": "0x1",
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7