Skip to content

L
linux
Commit 0340501b authored by Jeff Kirsher's avatar Jeff Kirsher
Browse files
Options

igbvf: Fix code comments and whitespace 

Fix the code comments to align with the drivers/net/ commenting style.
Also fix other checkpatch errors such as using tabs where possible and
properly wrap lines to conform to the 80 char limit (unless it is
a string).
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
parent 79849ebc
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 500 additions and 516 deletions
drivers/net/ethernet/intel/igbvf/defines.h
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -29,94 +28,93 @@
#define _E1000_DEFINES_H_
/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
#define REQ_TX_DESCRIPTOR_MULTIPLE 8
#define REQ_RX_DESCRIPTOR_MULTIPLE 8
/* IVAR valid bit */
#define E1000_IVAR_VALID 0x80
#define E1000_IVAR_VALID 0x80
/* Receive Descriptor bit definitions */
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
#define E1000_RXDEXT_STATERR_LB 0x00040000
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
#define E1000_RXDEXT_STATERR_CXE 0x10000000
#define E1000_RXDEXT_STATERR_TCPE 0x20000000
#define E1000_RXDEXT_STATERR_IPE 0x40000000
#define E1000_RXDEXT_STATERR_RXE 0x80000000
#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
#define E1000_RXDEXT_STATERR_LB 0x00040000
#define E1000_RXDEXT_STATERR_CE 0x01000000
#define E1000_RXDEXT_STATERR_SE 0x02000000
#define E1000_RXDEXT_STATERR_SEQ 0x04000000
#define E1000_RXDEXT_STATERR_CXE 0x10000000
#define E1000_RXDEXT_STATERR_TCPE 0x20000000
#define E1000_RXDEXT_STATERR_IPE 0x40000000
#define E1000_RXDEXT_STATERR_RXE 0x80000000
/* Same mask, but for extended and packet split descriptors */
#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
E1000_RXDEXT_STATERR_CE | \
E1000_RXDEXT_STATERR_SE | \
E1000_RXDEXT_STATERR_SEQ | \
E1000_RXDEXT_STATERR_CXE | \
E1000_RXDEXT_STATERR_RXE)
E1000_RXDEXT_STATERR_CE | \
E1000_RXDEXT_STATERR_SE | \
E1000_RXDEXT_STATERR_SEQ | \
E1000_RXDEXT_STATERR_CXE | \
E1000_RXDEXT_STATERR_RXE)
/* Device Control */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
#define E1000_CTRL_RST 0x04000000 /* Global reset */
/* Device Status */
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2
#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
#define SPEED_10 10
#define SPEED_100 100
#define SPEED_1000 1000
#define HALF_DUPLEX 1
#define FULL_DUPLEX 2
/* Transmit Descriptor bit definitions */
#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
#define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */
#define E1000_TXD_STAT_DD 0x00000001 /* Desc Done */
#define MAX_JUMBO_FRAME_SIZE 0x3F00
#define MAX_JUMBO_FRAME_SIZE 0x3F00
/* 802.1q VLAN Packet Size */
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
/* Error Codes */
#define E1000_SUCCESS 0
#define E1000_ERR_CONFIG 3
#define E1000_ERR_MAC_INIT 5
#define E1000_ERR_MBX 15
#define E1000_SUCCESS 0
#define E1000_ERR_CONFIG 3
#define E1000_ERR_MAC_INIT 5
#define E1000_ERR_MBX 15
/* SRRCTL bit definitions */
#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
#define E1000_SRRCTL_DROP_EN 0x80000000
#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
#define E1000_SRRCTL_DROP_EN 0x80000000
#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
/* Additional Descriptor Control definitions */
#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Que */
#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Que */
/* Direct Cache Access (DCA) definitions */
#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
#endif /* _E1000_DEFINES_H_ */
drivers/net/ethernet/intel/igbvf/ethtool.c
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -36,7 +35,6 @@
#include "igbvf.h"
#include <linux/if_vlan.h>
struct igbvf_stats {
char stat_string[ETH_GSTRING_LEN];
int sizeof_stat;
......@@ -74,7 +72,7 @@ static const char igbvf_gstrings_test[][ETH_GSTRING_LEN] = {
#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test)
static int igbvf_get_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
struct ethtool_cmd *ecmd)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
......@@ -111,18 +109,18 @@ static int igbvf_get_settings(struct net_device *netdev,
}
static int igbvf_set_settings(struct net_device *netdev,
struct ethtool_cmd *ecmd)
struct ethtool_cmd *ecmd)
{
return -EOPNOTSUPP;
}
static void igbvf_get_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
struct ethtool_pauseparam *pause)
{
}
static int igbvf_set_pauseparam(struct net_device *netdev,
struct ethtool_pauseparam *pause)
struct ethtool_pauseparam *pause)
{
return -EOPNOTSUPP;
}
......@@ -130,12 +128,14 @@ static int igbvf_set_pauseparam(struct net_device *netdev,
static u32 igbvf_get_msglevel(struct net_device *netdev)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
return adapter->msg_enable;
}
static void igbvf_set_msglevel(struct net_device *netdev, u32 data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
adapter->msg_enable = data;
}
......@@ -146,7 +146,7 @@ static int igbvf_get_regs_len(struct net_device *netdev)
}
static void igbvf_get_regs(struct net_device *netdev,
struct ethtool_regs *regs, void *p)
struct ethtool_regs *regs, void *p)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
......@@ -175,19 +175,19 @@ static int igbvf_get_eeprom_len(struct net_device *netdev)
}
static int igbvf_get_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, u8 *bytes)
struct ethtool_eeprom *eeprom, u8 *bytes)
{
return -EOPNOTSUPP;
}
static int igbvf_set_eeprom(struct net_device *netdev,
struct ethtool_eeprom *eeprom, u8 *bytes)
struct ethtool_eeprom *eeprom, u8 *bytes)
{
return -EOPNOTSUPP;
}
static void igbvf_get_drvinfo(struct net_device *netdev,
struct ethtool_drvinfo *drvinfo)
struct ethtool_drvinfo *drvinfo)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
......@@ -201,7 +201,7 @@ static void igbvf_get_drvinfo(struct net_device *netdev,
}
static void igbvf_get_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
struct ethtool_ringparam *ring)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *tx_ring = adapter->tx_ring;
......@@ -214,7 +214,7 @@ static void igbvf_get_ringparam(struct net_device *netdev,
}
static int igbvf_set_ringparam(struct net_device *netdev,
struct ethtool_ringparam *ring)
struct ethtool_ringparam *ring)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct igbvf_ring *temp_ring;
......@@ -255,10 +255,9 @@ static int igbvf_set_ringparam(struct net_device *netdev,
igbvf_down(adapter);
/*
* We can't just free everything and then setup again,
/* We can't just free everything and then setup again,
* because the ISRs in MSI-X mode get passed pointers
* to the tx and rx ring structs.
* to the Tx and Rx ring structs.
*/
if (new_tx_count != adapter->tx_ring->count) {
memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring));
......@@ -283,7 +282,7 @@ static int igbvf_set_ringparam(struct net_device *netdev,
igbvf_free_rx_resources(adapter->rx_ring);
memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
memcpy(adapter->rx_ring, temp_ring, sizeof(struct igbvf_ring));
}
err_setup:
igbvf_up(adapter);
......@@ -307,14 +306,13 @@ static int igbvf_link_test(struct igbvf_adapter *adapter, u64 *data)
}
static void igbvf_diag_test(struct net_device *netdev,
struct ethtool_test *eth_test, u64 *data)
struct ethtool_test *eth_test, u64 *data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
set_bit(__IGBVF_TESTING, &adapter->state);
/*
* Link test performed before hardware reset so autoneg doesn't
/* Link test performed before hardware reset so autoneg doesn't
* interfere with test result
*/
if (igbvf_link_test(adapter, &data[0]))
......@@ -325,20 +323,20 @@ static void igbvf_diag_test(struct net_device *netdev,
}
static void igbvf_get_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
struct ethtool_wolinfo *wol)
{
wol->supported = 0;
wol->wolopts = 0;
}
static int igbvf_set_wol(struct net_device *netdev,
struct ethtool_wolinfo *wol)
struct ethtool_wolinfo *wol)
{
return -EOPNOTSUPP;
}
static int igbvf_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
struct ethtool_coalesce *ec)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
......@@ -351,13 +349,13 @@ static int igbvf_get_coalesce(struct net_device *netdev,
}
static int igbvf_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
struct ethtool_coalesce *ec)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
if ((ec->rx_coalesce_usecs >= IGBVF_MIN_ITR_USECS) &&
(ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
(ec->rx_coalesce_usecs <= IGBVF_MAX_ITR_USECS)) {
adapter->current_itr = ec->rx_coalesce_usecs << 2;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
......@@ -366,8 +364,7 @@ static int igbvf_set_coalesce(struct net_device *netdev,
adapter->current_itr = IGBVF_START_ITR;
adapter->requested_itr = ec->rx_coalesce_usecs;
} else if (ec->rx_coalesce_usecs == 0) {
/*
* The user's desire is to turn off interrupt throttling
/* The user's desire is to turn off interrupt throttling
* altogether, but due to HW limitations, we can't do that.
* Instead we set a very small value in EITR, which would
* allow ~967k interrupts per second, but allow the adapter's
......@@ -376,8 +373,9 @@ static int igbvf_set_coalesce(struct net_device *netdev,
adapter->current_itr = 4;
adapter->requested_itr = 1000000000 /
(adapter->current_itr * 256);
} else
} else {
return -EINVAL;
}
writel(adapter->current_itr,
hw->hw_addr + adapter->rx_ring->itr_register);
......@@ -388,15 +386,15 @@ static int igbvf_set_coalesce(struct net_device *netdev,
static int igbvf_nway_reset(struct net_device *netdev)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
if (netif_running(netdev))
igbvf_reinit_locked(adapter);
return 0;
}
static void igbvf_get_ethtool_stats(struct net_device *netdev,
struct ethtool_stats *stats,
u64 *data)
struct ethtool_stats *stats,
u64 *data)
{
struct igbvf_adapter *adapter = netdev_priv(netdev);
int i;
......@@ -404,19 +402,18 @@ static void igbvf_get_ethtool_stats(struct net_device *netdev,
igbvf_update_stats(adapter);
for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
char *p = (char *)adapter +
igbvf_gstrings_stats[i].stat_offset;
igbvf_gstrings_stats[i].stat_offset;
char *b = (char *)adapter +
igbvf_gstrings_stats[i].base_stat_offset;
igbvf_gstrings_stats[i].base_stat_offset;
data[i] = ((igbvf_gstrings_stats[i].sizeof_stat ==
sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
(*(u32 *)p - *(u32 *)b));
sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
(*(u32 *)p - *(u32 *)b));
}
}
static int igbvf_get_sset_count(struct net_device *dev, int stringset)
{
switch(stringset) {
switch (stringset) {
case ETH_SS_TEST:
return IGBVF_TEST_LEN;
case ETH_SS_STATS:
......@@ -427,7 +424,7 @@ static int igbvf_get_sset_count(struct net_device *dev, int stringset)
}
static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
u8 *data)
u8 *data)
{
u8 *p = data;
int i;
......
drivers/net/ethernet/intel/igbvf/igbvf.h
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -43,10 +42,10 @@ struct igbvf_info;
struct igbvf_adapter;
/* Interrupt defines */
#define IGBVF_START_ITR 488 /* ~8000 ints/sec */
#define IGBVF_4K_ITR 980
#define IGBVF_20K_ITR 196
#define IGBVF_70K_ITR 56
#define IGBVF_START_ITR 488 /* ~8000 ints/sec */
#define IGBVF_4K_ITR 980
#define IGBVF_20K_ITR 196
#define IGBVF_70K_ITR 56
enum latency_range {
lowest_latency = 0,
......@@ -55,56 +54,55 @@ enum latency_range {
latency_invalid = 255
};
/* Interrupt modes, as used by the IntMode parameter */
#define IGBVF_INT_MODE_LEGACY 0
#define IGBVF_INT_MODE_MSI 1
#define IGBVF_INT_MODE_MSIX 2
#define IGBVF_INT_MODE_LEGACY 0
#define IGBVF_INT_MODE_MSI 1
#define IGBVF_INT_MODE_MSIX 2
/* Tx/Rx descriptor defines */
#define IGBVF_DEFAULT_TXD 256
#define IGBVF_MAX_TXD 4096
#define IGBVF_MIN_TXD 80
#define IGBVF_DEFAULT_TXD 256
#define IGBVF_MAX_TXD 4096
#define IGBVF_MIN_TXD 80
#define IGBVF_DEFAULT_RXD 256
#define IGBVF_MAX_RXD 4096
#define IGBVF_MIN_RXD 80
#define IGBVF_DEFAULT_RXD 256
#define IGBVF_MAX_RXD 4096
#define IGBVF_MIN_RXD 80
#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* RX descriptor control thresholds.
* PTHRESH - MAC will consider prefetch if it has fewer than this number of
* descriptors available in its onboard memory.
* Setting this to 0 disables RX descriptor prefetch.
* descriptors available in its onboard memory.
* Setting this to 0 disables RX descriptor prefetch.
* HTHRESH - MAC will only prefetch if there are at least this many descriptors
* available in host memory.
* If PTHRESH is 0, this should also be 0.
* available in host memory.
* If PTHRESH is 0, this should also be 0.
* WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
* descriptors until either it has this many to write back, or the
* ITR timer expires.
* descriptors until either it has this many to write back, or the
* ITR timer expires.
*/
#define IGBVF_RX_PTHRESH 16
#define IGBVF_RX_HTHRESH 8
#define IGBVF_RX_WTHRESH 1
#define IGBVF_RX_PTHRESH 16
#define IGBVF_RX_HTHRESH 8
#define IGBVF_RX_WTHRESH 1
/* this is the size past which hardware will drop packets when setting LPE=0 */
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
/* How many Tx Descriptors do we need to call netif_wake_queue ? */
#define IGBVF_TX_QUEUE_WAKE 32
#define IGBVF_TX_QUEUE_WAKE 32
/* How many Rx Buffers do we bundle into one write to the hardware ? */
#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define AUTO_ALL_MODES 0
#define IGBVF_EEPROM_APME 0x0400
#define AUTO_ALL_MODES 0
#define IGBVF_EEPROM_APME 0x0400
#define IGBVF_MNG_VLAN_NONE (-1)
#define IGBVF_MNG_VLAN_NONE (-1)
/* Number of packet split data buffers (not including the header buffer) */
#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
enum igbvf_boards {
board_vf,
......@@ -116,8 +114,7 @@ struct igbvf_queue_stats {
u64 bytes;
};
/*
* wrappers around a pointer to a socket buffer,
/* wrappers around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer
*/
struct igbvf_buffer {
......@@ -148,10 +145,10 @@ union igbvf_desc {
struct igbvf_ring {
struct igbvf_adapter *adapter; /* backlink */
union igbvf_desc *desc; /* pointer to ring memory */
dma_addr_t dma; /* phys address of ring */
unsigned int size; /* length of ring in bytes */
unsigned int count; /* number of desc. in ring */
union igbvf_desc *desc; /* pointer to ring memory */
dma_addr_t dma; /* phys address of ring */
unsigned int size; /* length of ring in bytes */
unsigned int count; /* number of desc. in ring */
u16 next_to_use;
u16 next_to_clean;
......@@ -202,9 +199,7 @@ struct igbvf_adapter {
u32 requested_itr; /* ints/sec or adaptive */
u32 current_itr; /* Actual ITR register value, not ints/sec */
/*
* Tx
*/
/* Tx */
struct igbvf_ring *tx_ring /* One per active queue */
____cacheline_aligned_in_smp;
......@@ -226,9 +221,7 @@ struct igbvf_adapter {
u32 tx_fifo_size;
u32 tx_dma_failed;
/*
* Rx
*/
/* Rx */
struct igbvf_ring *rx_ring;
u32 rx_int_delay;
......@@ -249,7 +242,7 @@ struct igbvf_adapter {
struct net_device *netdev;
struct pci_dev *pdev;
struct net_device_stats net_stats;
spinlock_t stats_lock; /* prevent concurrent stats updates */
spinlock_t stats_lock; /* prevent concurrent stats updates */
/* structs defined in e1000_hw.h */
struct e1000_hw hw;
......@@ -286,16 +279,16 @@ struct igbvf_adapter {
};
struct igbvf_info {
enum e1000_mac_type mac;
unsigned int flags;
u32 pba;
void (*init_ops)(struct e1000_hw *);
s32 (*get_variants)(struct igbvf_adapter *);
enum e1000_mac_type mac;
unsigned int flags;
u32 pba;
void (*init_ops)(struct e1000_hw *);
s32 (*get_variants)(struct igbvf_adapter *);
};
/* hardware capability, feature, and workaround flags */
#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
#define IGBVF_FLAG_RX_LB_VLAN_BSWAP (1 << 1)
#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
#define IGBVF_FLAG_RX_LB_VLAN_BSWAP (1 << 1)
#define IGBVF_RX_DESC_ADV(R, i) \
(&((((R).desc))[i].rx_desc))
#define IGBVF_TX_DESC_ADV(R, i) \
......
drivers/net/ethernet/intel/igbvf/mbx.c
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -54,10 +53,10 @@ static s32 e1000_poll_for_msg(struct e1000_hw *hw)
}
/**
* e1000_poll_for_ack - Wait for message acknowledgement
* e1000_poll_for_ack - Wait for message acknowledgment
* @hw: pointer to the HW structure
*
* returns SUCCESS if it successfully received a message acknowledgement
* returns SUCCESS if it successfully received a message acknowledgment
**/
static s32 e1000_poll_for_ack(struct e1000_hw *hw)
{
......@@ -218,7 +217,7 @@ static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
s32 ret_val = -E1000_ERR_MBX;
if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
E1000_V2PMAILBOX_RSTI))) {
E1000_V2PMAILBOX_RSTI))) {
ret_val = E1000_SUCCESS;
hw->mbx.stats.rsts++;
}
......@@ -239,7 +238,7 @@ static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
/* Take ownership of the buffer */
ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
/* reserve mailbox for vf use */
/* reserve mailbox for VF use */
if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
ret_val = E1000_SUCCESS;
......@@ -283,7 +282,7 @@ static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
}
/**
* e1000_read_mbx_vf - Reads a message from the inbox intended for vf
* e1000_read_mbx_vf - Reads a message from the inbox intended for VF
* @hw: pointer to the HW structure
* @msg: The message buffer
* @size: Length of buffer
......@@ -315,17 +314,18 @@ static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
}
/**
* e1000_init_mbx_params_vf - set initial values for vf mailbox
* e1000_init_mbx_params_vf - set initial values for VF mailbox
* @hw: pointer to the HW structure
*
* Initializes the hw->mbx struct to correct values for vf mailbox
* Initializes the hw->mbx struct to correct values for VF mailbox
*/
s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
{
struct e1000_mbx_info *mbx = &hw->mbx;
/* start mailbox as timed out and let the reset_hw call set the timeout
* value to being communications */
* value to being communications
*/
mbx->timeout = 0;
mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
......@@ -347,4 +347,3 @@ s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
return E1000_SUCCESS;
}
drivers/net/ethernet/intel/igbvf/mbx.h
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -30,44 +29,44 @@
#include "vf.h"
#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
* PF. The reverse is true if it is E1000_PF_*.
* Message ACK's are the value or'd with 0xF0000000
*/
#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
* this are the ACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
* this are the NACK */
#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
clear to send requests */
/* Messages below or'd with this are the ACK */
#define E1000_VT_MSGTYPE_ACK 0x80000000
/* Messages below or'd with this are the NACK */
#define E1000_VT_MSGTYPE_NACK 0x40000000
/* Indicates that VF is still clear to send requests */
#define E1000_VT_MSGTYPE_CTS 0x20000000
/* We have a total wait time of 1s for vf mailbox posted messages */
#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */
#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mbx timeout */
#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
#define E1000_VT_MSGINFO_SHIFT 16
#define E1000_VT_MSGINFO_SHIFT 16
/* bits 23:16 are used for exra info for certain messages */
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
#define E1000_VF_RESET 0x01 /* VF requests reset */
#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
s32 e1000_init_mbx_params_vf(struct e1000_hw *);
......
drivers/net/ethernet/intel/igbvf/netdev.c
View file @ 0340501b
This diff is collapsed.
drivers/net/ethernet/intel/igbvf/regs.h
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -28,81 +27,81 @@
#ifndef _E1000_REGS_H_
#define _E1000_REGS_H_
#define E1000_CTRL 0x00000 /* Device Control - RW */
#define E1000_STATUS 0x00008 /* Device Status - RO */
#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
/*
* Convenience macros
#define E1000_CTRL 0x00000 /* Device Control - RW */
#define E1000_STATUS 0x00008 /* Device Status - RO */
#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
/* Convenience macros
*
* Note: "_n" is the queue number of the register to be written to.
*
* Example usage:
* E1000_RDBAL_REG(current_rx_queue)
*/
#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
(0x0C000 + ((_n) * 0x40)))
#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
(0x0C004 + ((_n) * 0x40)))
#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
(0x0C008 + ((_n) * 0x40)))
#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
(0x0C00C + ((_n) * 0x40)))
#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
(0x0C010 + ((_n) * 0x40)))
#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
(0x0C018 + ((_n) * 0x40)))
#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
(0x0C028 + ((_n) * 0x40)))
#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
(0x0E000 + ((_n) * 0x40)))
#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
(0x0E004 + ((_n) * 0x40)))
#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
(0x0E008 + ((_n) * 0x40)))
#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
(0x0E010 + ((_n) * 0x40)))
#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
(0x0E018 + ((_n) * 0x40)))
#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
(0x0E028 + ((_n) * 0x40)))
#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
(0x054E0 + ((_i - 16) * 8)))
#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
(0x054E4 + ((_i - 16) * 8)))
#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
(0x0C000 + ((_n) * 0x40)))
#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
(0x0C004 + ((_n) * 0x40)))
#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
(0x0C008 + ((_n) * 0x40)))
#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
(0x0C00C + ((_n) * 0x40)))
#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
(0x0C010 + ((_n) * 0x40)))
#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
(0x0C018 + ((_n) * 0x40)))
#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
(0x0C028 + ((_n) * 0x40)))
#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
(0x0E000 + ((_n) * 0x40)))
#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
(0x0E004 + ((_n) * 0x40)))
#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
(0x0E008 + ((_n) * 0x40)))
#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
(0x0E010 + ((_n) * 0x40)))
#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
(0x0E018 + ((_n) * 0x40)))
#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
(0x0E028 + ((_n) * 0x40)))
#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
(0x054E0 + ((_i - 16) * 8)))
#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
(0x054E4 + ((_i - 16) * 8)))
/* Statistics registers */
#define E1000_VFGPRC 0x00F10
#define E1000_VFGORC 0x00F18
#define E1000_VFMPRC 0x00F3C
#define E1000_VFGPTC 0x00F14
#define E1000_VFGOTC 0x00F34
#define E1000_VFGOTLBC 0x00F50
#define E1000_VFGPTLBC 0x00F44
#define E1000_VFGORLBC 0x00F48
#define E1000_VFGPRLBC 0x00F40
#define E1000_VFGPRC 0x00F10
#define E1000_VFGORC 0x00F18
#define E1000_VFMPRC 0x00F3C
#define E1000_VFGPTC 0x00F14
#define E1000_VFGOTC 0x00F34
#define E1000_VFGOTLBC 0x00F50
#define E1000_VFGPTLBC 0x00F44
#define E1000_VFGORLBC 0x00F48
#define E1000_VFGPRLBC 0x00F40
/* These act per VF so an array friendly macro is used */
#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
/* Define macros for handling registers */
#define er32(reg) readl(hw->hw_addr + E1000_##reg)
#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
#define er32(reg) readl(hw->hw_addr + E1000_##reg)
#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
#define array_er32(reg, offset) \
readl(hw->hw_addr + E1000_##reg + (offset << 2))
#define array_ew32(reg, offset, val) \
writel((val), hw->hw_addr + E1000_##reg + (offset << 2))
#define e1e_flush() er32(STATUS)
#define e1e_flush() er32(STATUS)
#endif
drivers/net/ethernet/intel/igbvf/vf.c
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -25,17 +24,16 @@
*******************************************************************************/
#include "vf.h"
static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
u16 *duplex);
u16 *duplex);
static s32 e1000_init_hw_vf(struct e1000_hw *hw);
static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
u32, u32, u32);
u32, u32, u32);
static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
......@@ -94,7 +92,7 @@ void e1000_init_function_pointers_vf(struct e1000_hw *hw)
* the status register's data which is often stale and inaccurate.
**/
static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
u16 *duplex)
u16 *duplex)
{
s32 status;
......@@ -130,7 +128,7 @@ static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
u8 *addr = (u8 *)(&msgbuf[1]);
u32 ctrl;
/* assert vf queue/interrupt reset */
/* assert VF queue/interrupt reset */
ctrl = er32(CTRL);
ew32(CTRL, ctrl | E1000_CTRL_RST);
......@@ -144,7 +142,7 @@ static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
/* mailbox timeout can now become active */
mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
/* notify pf of vf reset completion */
/* notify PF of VF reset completion */
msgbuf[0] = E1000_VF_RESET;
mbx->ops.write_posted(hw, msgbuf, 1);
......@@ -153,7 +151,8 @@ static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
/* set our "perm_addr" based on info provided by PF */
ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
if (!ret_val) {
if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
if (msgbuf[0] == (E1000_VF_RESET |
E1000_VT_MSGTYPE_ACK))
memcpy(hw->mac.perm_addr, addr, ETH_ALEN);
else
ret_val = -E1000_ERR_MAC_INIT;
......@@ -194,15 +193,14 @@ static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
/* Register count multiplied by bits per register */
hash_mask = (hw->mac.mta_reg_count * 32) - 1;
/*
* The bit_shift is the number of left-shifts
/* The bit_shift is the number of left-shifts
* where 0xFF would still fall within the hash mask.
*/
while (hash_mask >> bit_shift != 0xFF)
bit_shift++;
hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
(((u16) mc_addr[5]) << bit_shift)));
(((u16)mc_addr[5]) << bit_shift)));
return hash_value;
}
......@@ -221,8 +219,8 @@ static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
* unless there are workarounds that change this.
**/
static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count)
u8 *mc_addr_list, u32 mc_addr_count,
u32 rar_used_count, u32 rar_count)
{
struct e1000_mbx_info *mbx = &hw->mbx;
u32 msgbuf[E1000_VFMAILBOX_SIZE];
......@@ -305,7 +303,7 @@ void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
* @addr: pointer to the receive address
* @index: receive address array register
**/
static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
static void e1000_rar_set_vf(struct e1000_hw *hw, u8 *addr, u32 index)
{
struct e1000_mbx_info *mbx = &hw->mbx;
u32 msgbuf[3];
......@@ -354,8 +352,7 @@ static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
s32 ret_val = E1000_SUCCESS;
u32 in_msg = 0;
/*
* We only want to run this if there has been a rst asserted.
/* We only want to run this if there has been a rst asserted.
* in this case that could mean a link change, device reset,
* or a virtual function reset
*/
......@@ -367,31 +364,33 @@ static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
if (!mac->get_link_status)
goto out;
/* if link status is down no point in checking to see if pf is up */
/* if link status is down no point in checking to see if PF is up */
if (!(er32(STATUS) & E1000_STATUS_LU))
goto out;
/* if the read failed it could just be a mailbox collision, best wait
* until we are called again and don't report an error */
* until we are called again and don't report an error
*/
if (mbx->ops.read(hw, &in_msg, 1))
goto out;
/* if incoming message isn't clear to send we are waiting on response */
if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
/* message is not CTS and is NACK we must have lost CTS status */
/* msg is not CTS and is NACK we must have lost CTS status */
if (in_msg & E1000_VT_MSGTYPE_NACK)
ret_val = -E1000_ERR_MAC_INIT;
goto out;
}
/* the pf is talking, if we timed out in the past we reinit */
/* the PF is talking, if we timed out in the past we reinit */
if (!mbx->timeout) {
ret_val = -E1000_ERR_MAC_INIT;
goto out;
}
/* if we passed all the tests above then the link is up and we no
* longer need to check for link */
* longer need to check for link
*/
mac->get_link_status = false;
out:
......
drivers/net/ethernet/intel/igbvf/vf.h
View file @ 0340501b
......@@ -13,8 +13,7 @@
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
this program; if not, see <http://www.gnu.org/licenses/>.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
......@@ -38,30 +37,29 @@
struct e1000_hw;
#define E1000_DEV_ID_82576_VF 0x10CA
#define E1000_DEV_ID_I350_VF 0x1520
#define E1000_REVISION_0 0
#define E1000_REVISION_1 1
#define E1000_REVISION_2 2
#define E1000_REVISION_3 3
#define E1000_REVISION_4 4
#define E1000_DEV_ID_82576_VF 0x10CA
#define E1000_DEV_ID_I350_VF 0x1520
#define E1000_REVISION_0 0
#define E1000_REVISION_1 1
#define E1000_REVISION_2 2
#define E1000_REVISION_3 3
#define E1000_REVISION_4 4
#define E1000_FUNC_0 0
#define E1000_FUNC_1 1
#define E1000_FUNC_0 0
#define E1000_FUNC_1 1
/*
* Receive Address Register Count
/* Receive Address Register Count
* Number of high/low register pairs in the RAR. The RAR (Receive Address
* Registers) holds the directed and multicast addresses that we monitor.
* These entries are also used for MAC-based filtering.
*/
#define E1000_RAR_ENTRIES_VF 1
#define E1000_RAR_ENTRIES_VF 1
/* Receive Descriptor - Advanced */
union e1000_adv_rx_desc {
struct {
u64 pkt_addr; /* Packet buffer address */
u64 hdr_addr; /* Header buffer address */
u64 pkt_addr; /* Packet buffer address */
u64 hdr_addr; /* Header buffer address */
} read;
struct {
struct {
......@@ -69,53 +67,53 @@ union e1000_adv_rx_desc {
u32 data;
struct {
u16 pkt_info; /* RSS/Packet type */
u16 hdr_info; /* Split Header,
* hdr buffer length */
/* Split Header, hdr buffer length */
u16 hdr_info;
} hs_rss;
} lo_dword;
union {
u32 rss; /* RSS Hash */
u32 rss; /* RSS Hash */
struct {
u16 ip_id; /* IP id */
u16 csum; /* Packet Checksum */
u16 ip_id; /* IP id */
u16 csum; /* Packet Checksum */
} csum_ip;
} hi_dword;
} lower;
struct {
u32 status_error; /* ext status/error */
u16 length; /* Packet length */
u16 vlan; /* VLAN tag */
u32 status_error; /* ext status/error */
u16 length; /* Packet length */
u16 vlan; /* VLAN tag */
} upper;
} wb; /* writeback */
};
#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
/* Transmit Descriptor - Advanced */
union e1000_adv_tx_desc {
struct {
u64 buffer_addr; /* Address of descriptor's data buf */
u64 buffer_addr; /* Address of descriptor's data buf */
u32 cmd_type_len;
u32 olinfo_status;
} read;
struct {
u64 rsvd; /* Reserved */
u64 rsvd; /* Reserved */
u32 nxtseq_seed;
u32 status;
} wb;
};
/* Adv Transmit Descriptor Config Masks */
#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
/* Context descriptors */
struct e1000_adv_tx_context_desc {
......@@ -125,11 +123,11 @@ struct e1000_adv_tx_context_desc {
u32 mss_l4len_idx;
};
#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
enum e1000_mac_type {
e1000_undefined = 0,
......@@ -262,5 +260,4 @@ struct e1000_hw {
void e1000_rlpml_set_vf(struct e1000_hw *, u16);
void e1000_init_function_pointers_vf(struct e1000_hw *hw);
#endif /* _E1000_VF_H_ */
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7