ath10k: add QCA9377 hw1.0 support

Add new BMI target version and chip id revision. Register it
on supported chips list.
Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

drivers/net/wireless/ath/ath10k/core.c

@@ -160,6 +160,24 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 			.board_ext_size = QCA99X0_BOARD_EXT_DATA_SZ,
 		},
 	},
+	{
+		.id = QCA9377_HW_1_0_DEV_VERSION,
+		.dev_id = QCA9377_1_0_DEVICE_ID,
+		.name = "qca9377 hw1.0",
+		.patch_load_addr = QCA9377_HW_1_0_PATCH_LOAD_ADDR,
+		.uart_pin = 6,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.fw = {
+			.dir = QCA9377_HW_1_0_FW_DIR,
+			.fw = QCA9377_HW_1_0_FW_FILE,
+			.otp = QCA9377_HW_1_0_OTP_FILE,
+			.board = QCA9377_HW_1_0_BOARD_DATA_FILE,
+			.board_size = QCA9377_BOARD_DATA_SZ,
+			.board_ext_size = QCA9377_BOARD_EXT_DATA_SZ,
+		},
+	},
 	{
 		.id = QCA9377_HW_1_1_DEV_VERSION,
 		.dev_id = QCA9377_1_0_DEVICE_ID,

drivers/net/wireless/ath/ath10k/hw.h

@@ -48,6 +48,8 @@
 #define QCA6174_HW_3_0_VERSION		0x05020000
 #define QCA6174_HW_3_2_VERSION		0x05030000
 
+/* QCA9377 target BMI version signatures */
+#define QCA9377_HW_1_0_DEV_VERSION	0x05020000
 #define QCA9377_HW_1_1_DEV_VERSION	0x05020001
 
 enum qca6174_pci_rev {
@@ -69,6 +71,7 @@ enum qca6174_chip_id_rev {
 };
 
 enum qca9377_chip_id_rev {
+	QCA9377_HW_1_0_CHIP_ID_REV = 0x0,
 	QCA9377_HW_1_1_CHIP_ID_REV = 0x1,
 };
 

drivers/net/wireless/ath/ath10k/pci.c

@@ -86,6 +86,8 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	{ QCA6174_2_1_DEVICE_ID, QCA6174_HW_3_2_CHIP_ID_REV },
 
 	{ QCA99X0_2_0_DEVICE_ID, QCA99X0_HW_2_0_CHIP_ID_REV },
+
+	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_0_CHIP_ID_REV },
 	{ QCA9377_1_0_DEVICE_ID, QCA9377_HW_1_1_CHIP_ID_REV },
 };