Commit 034ee299 authored by Arnd Bergmann's avatar Arnd Bergmann

Merge branch 'depends/omap2_dss' into next/cleanup

Omap cleanups conflicted with omap2_dss work in a nontrivial
way, this is the most logical fixup.

Conflicts:
	arch/arm/mach-omap2/board-2430sdp.c
	arch/arm/mach-omap2/board-4430sdp.c
	arch/arm/mach-omap2/board-apollon.c
	arch/arm/mach-omap2/board-h4.c
	arch/arm/mach-omap2/board-ldp.c
	arch/arm/mach-omap2/board-rx51.c
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents d6bb0f27 3e281890
......@@ -39,6 +39,9 @@
#include <plat/usb.h>
#include <plat/gpmc-smc91x.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
#include "hsmmc.h"
#include "common-board-devices.h"
......@@ -99,20 +102,72 @@ static struct platform_device sdp2430_flash_device = {
.resource = &sdp2430_flash_resource,
};
static struct platform_device sdp2430_lcd_device = {
.name = "sdp2430_lcd",
.id = -1,
};
static struct platform_device *sdp2430_devices[] __initdata = {
&sdp2430_flash_device,
};
/* LCD */
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
static int sdp2430_panel_enable_lcd(struct omap_dss_device *dssdev)
{
gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 1);
gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 1);
return 0;
}
static void sdp2430_panel_disable_lcd(struct omap_dss_device *dssdev)
{
gpio_direction_output(SDP2430_LCD_PANEL_ENABLE_GPIO, 0);
gpio_direction_output(SDP2430_LCD_PANEL_BACKLIGHT_GPIO, 0);
}
static struct panel_generic_dpi_data sdp2430_panel_data = {
.name = "nec_nl2432dr22-11b",
.platform_enable = sdp2430_panel_enable_lcd,
.platform_disable = sdp2430_panel_disable_lcd,
};
static struct omap_dss_device sdp2430_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &sdp2430_panel_data,
};
static struct omap_dss_device *sdp2430_dss_devices[] = {
&sdp2430_lcd_device,
};
static struct omap_lcd_config sdp2430_lcd_config __initdata = {
.ctrl_name = "internal",
static struct omap_dss_board_info sdp2430_dss_data = {
.num_devices = ARRAY_SIZE(sdp2430_dss_devices),
.devices = sdp2430_dss_devices,
.default_device = &sdp2430_lcd_device,
};
static void __init sdp2430_display_init(void)
{
int r;
static struct gpio gpios[] __initdata = {
{ SDP2430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
"LCD reset" },
{ SDP2430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW,
"LCD Backlight" },
};
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
if (r) {
pr_err("Cannot request LCD GPIOs, error %d\n", r);
return;
}
omap_display_init(&sdp2430_dss_data);
}
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
static struct omap_smc91x_platform_data board_smc91x_data = {
......@@ -137,10 +192,6 @@ static inline void board_smc91x_init(void)
#endif
static struct omap_board_config_kernel sdp2430_config[] __initdata = {
{OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -222,9 +273,6 @@ static void __init omap_2430sdp_init(void)
{
omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
omap_board_config = sdp2430_config;
omap_board_config_size = ARRAY_SIZE(sdp2430_config);
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
......@@ -241,6 +289,8 @@ static void __init omap_2430sdp_init(void)
/* Turn off secondary LCD backlight */
gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
"Secondary LCD backlight");
sdp2430_display_init();
}
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
......
......@@ -37,7 +37,7 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc-smc91x.h>
......@@ -186,8 +186,7 @@ static struct omap_dss_device sdp3430_lcd_device = {
.platform_disable = sdp3430_panel_disable_lcd,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = sdp3430_panel_enable_dvi,
.platform_disable = sdp3430_panel_disable_dvi,
};
......@@ -195,7 +194,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device sdp3430_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -38,6 +38,8 @@
#include <plat/mmc.h>
#include <plat/omap4-keypad.h>
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include <video/omap-panel-picodlp.h>
#include <linux/wl12xx.h>
#include "mux.h"
......@@ -52,6 +54,8 @@
#define OMAP4_SFH7741_ENABLE_GPIO 188
#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */
#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */
#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */
#define DLP_POWER_ON_GPIO 40
#define GPIO_WIFI_PMENA 54
#define GPIO_WIFI_IRQ 53
......@@ -340,11 +344,6 @@ static int __init omap_ethernet_init(void)
return status;
}
static struct platform_device sdp4430_lcd_device = {
.name = "sdp4430_lcd",
.id = -1,
};
static struct regulator_consumer_supply sdp4430_vbat_supply[] = {
REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"),
REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"),
......@@ -374,21 +373,12 @@ static struct platform_device sdp4430_vbat = {
};
static struct platform_device *sdp4430_devices[] __initdata = {
&sdp4430_lcd_device,
&sdp4430_gpio_keys_device,
&sdp4430_leds_gpio,
&sdp4430_leds_pwm,
&sdp4430_vbat,
};
static struct omap_lcd_config sdp4430_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_board_config_kernel sdp4430_config[] __initdata = {
{ OMAP_TAG_LCD, &sdp4430_lcd_config },
};
static struct omap_musb_board_data musb_board_data = {
.interface_type = MUSB_INTERFACE_UTMI,
.mode = MUSB_OTG,
......@@ -642,37 +632,202 @@ static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev)
gpio_free(HDMI_GPIO_HPD);
}
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.clocks = {
.dispc = {
static struct nokia_dsi_panel_data dsi1_panel = {
.name = "taal",
.reset_gpio = 102,
.use_ext_te = false,
.ext_te_gpio = 101,
.esd_interval = 0,
};
static struct omap_dss_device sdp4430_lcd_device = {
.name = "lcd",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi1_panel,
.phy.dsi = {
.clk_lane = 1,
.clk_pol = 0,
.data1_lane = 2,
.data1_pol = 0,
.data2_lane = 3,
.data2_pol = 0,
.module = 0,
},
.clocks = {
.dispc = {
.channel = {
/* Logic Clock = 172.8 MHz */
.lck_div = 1,
/* Pixel Clock = 34.56 MHz */
.pck_div = 5,
.lcd_clk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DISPC,
},
.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
},
.hdmi = {
.regn = 15,
.regm2 = 1,
.dsi = {
.regn = 16, /* Fint = 2.4 MHz */
.regm = 180, /* DDR Clock = 216 MHz */
.regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
.regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
.lp_clk_div = 10, /* LP Clock = 8.64 MHz */
.dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI_PLL_HSDIV_DSI,
},
},
.channel = OMAP_DSS_CHANNEL_LCD,
};
static struct nokia_dsi_panel_data dsi2_panel = {
.name = "taal",
.reset_gpio = 104,
.use_ext_te = false,
.ext_te_gpio = 103,
.esd_interval = 0,
};
static struct omap_dss_device sdp4430_lcd2_device = {
.name = "lcd2",
.driver_name = "taal",
.type = OMAP_DISPLAY_TYPE_DSI,
.data = &dsi2_panel,
.phy.dsi = {
.clk_lane = 1,
.clk_pol = 0,
.data1_lane = 2,
.data1_pol = 0,
.data2_lane = 3,
.data2_pol = 0,
.module = 1,
},
.clocks = {
.dispc = {
.channel = {
/* Logic Clock = 172.8 MHz */
.lck_div = 1,
/* Pixel Clock = 34.56 MHz */
.pck_div = 5,
.lcd_clk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DISPC,
},
.dispc_fclk_src = OMAP_DSS_CLK_SRC_FCK,
},
.dsi = {
.regn = 16, /* Fint = 2.4 MHz */
.regm = 180, /* DDR Clock = 216 MHz */
.regm_dispc = 5, /* PLL1_CLK1 = 172.8 MHz */
.regm_dsi = 5, /* PLL1_CLK2 = 172.8 MHz */
.lp_clk_div = 10, /* LP Clock = 8.64 MHz */
.dsi_fclk_src = OMAP_DSS_CLK_SRC_DSI2_PLL_HSDIV_DSI,
},
},
.channel = OMAP_DSS_CHANNEL_LCD2,
};
static void sdp4430_lcd_init(void)
{
int r;
r = gpio_request_one(dsi1_panel.reset_gpio, GPIOF_DIR_OUT,
"lcd1_reset_gpio");
if (r)
pr_err("%s: Could not get lcd1_reset_gpio\n", __func__);
r = gpio_request_one(dsi2_panel.reset_gpio, GPIOF_DIR_OUT,
"lcd2_reset_gpio");
if (r)
pr_err("%s: Could not get lcd2_reset_gpio\n", __func__);
}
static struct omap_dss_device sdp4430_hdmi_device = {
.name = "hdmi",
.driver_name = "hdmi_panel",
.type = OMAP_DISPLAY_TYPE_HDMI,
.platform_enable = sdp4430_panel_enable_hdmi,
.platform_disable = sdp4430_panel_disable_hdmi,
.channel = OMAP_DSS_CHANNEL_DIGIT,
};
static struct picodlp_panel_data sdp4430_picodlp_pdata = {
.picodlp_adapter_id = 2,
.emu_done_gpio = 44,
.pwrgood_gpio = 45,
};
static void sdp4430_picodlp_init(void)
{
int r;
const struct gpio picodlp_gpios[] = {
{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
"DLP POWER ON"},
{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
"DLP EMU DONE"},
{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
"DLP PWRGOOD"},
};
r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
if (r)
pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
}
static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
{
gpio_set_value(DISPLAY_SEL_GPIO, 0);
gpio_set_value(DLP_POWER_ON_GPIO, 1);
return 0;
}
static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
{
gpio_set_value(DLP_POWER_ON_GPIO, 0);
gpio_set_value(DISPLAY_SEL_GPIO, 1);
}
static struct omap_dss_device sdp4430_picodlp_device = {
.name = "picodlp",
.driver_name = "picodlp_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 24,
.channel = OMAP_DSS_CHANNEL_LCD2,
.platform_enable = sdp4430_panel_enable_picodlp,
.platform_disable = sdp4430_panel_disable_picodlp,
.data = &sdp4430_picodlp_pdata,
};
static struct omap_dss_device *sdp4430_dss_devices[] = {
&sdp4430_lcd_device,
&sdp4430_lcd2_device,
&sdp4430_hdmi_device,
&sdp4430_picodlp_device,
};
static struct omap_dss_board_info sdp4430_dss_data = {
.num_devices = ARRAY_SIZE(sdp4430_dss_devices),
.devices = sdp4430_dss_devices,
.default_device = &sdp4430_hdmi_device,
.default_device = &sdp4430_lcd_device,
};
void omap_4430sdp_display_init(void)
static void omap_4430sdp_display_init(void)
{
int r;
/* Enable LCD2 by default (instead of Pico DLP) */
r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
"display_sel");
if (r)
pr_err("%s: Could not get display_sel GPIO\n", __func__);
sdp4430_lcd_init();
sdp4430_hdmi_mux_init();
sdp4430_picodlp_init();
omap_display_init(&sdp4430_dss_data);
}
......@@ -796,9 +951,6 @@ static void __init omap_4430sdp_init(void)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, NULL, package);
omap_board_config = sdp4430_config;
omap_board_config_size = ARRAY_SIZE(sdp4430_config);
omap4_i2c_init();
omap_sfh7741prox_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
......
......@@ -36,6 +36,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "control.h"
......@@ -333,8 +334,7 @@ static void am3517_evm_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = am3517_evm_panel_enable_dvi,
.platform_disable = am3517_evm_panel_disable_dvi,
};
......@@ -342,7 +342,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device am3517_evm_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -40,6 +40,9 @@
#include <plat/common.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
......@@ -149,11 +152,6 @@ static struct platform_device apollon_smc91x_device = {
.resource = apollon_smc91x_resources,
};
static struct platform_device apollon_lcd_device = {
.name = "apollon_lcd",
.id = -1,
};
static struct omap_led_config apollon_led_config[] = {
{
.cdev = {
......@@ -191,7 +189,6 @@ static struct platform_device apollon_led_device = {
static struct platform_device *apollon_devices[] __initdata = {
&apollon_onenand_device,
&apollon_smc91x_device,
&apollon_lcd_device,
&apollon_led_device,
};
......@@ -265,12 +262,26 @@ static struct omap_usb_config apollon_usb_config __initdata = {
.pins[0] = 6,
};
static struct omap_lcd_config apollon_lcd_config __initdata = {
.ctrl_name = "internal",
static struct panel_generic_dpi_data apollon_panel_data = {
.name = "apollon",
};
static struct omap_dss_device apollon_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.data = &apollon_panel_data,
};
static struct omap_dss_device *apollon_dss_devices[] = {
&apollon_lcd_device,
};
static struct omap_board_config_kernel apollon_config[] __initdata = {
{ OMAP_TAG_LCD, &apollon_lcd_config },
static struct omap_dss_board_info apollon_dss_data = {
.num_devices = ARRAY_SIZE(apollon_dss_devices),
.devices = apollon_dss_devices,
.default_device = &apollon_lcd_device,
};
static struct gpio apollon_gpio_leds[] __initdata = {
......@@ -308,8 +319,6 @@ static void __init omap_apollon_init(void)
u32 v;
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
omap_board_config = apollon_config;
omap_board_config_size = ARRAY_SIZE(apollon_config);
apollon_init_smc91x();
apollon_led_init();
......@@ -335,6 +344,7 @@ static void __init omap_apollon_init(void)
platform_add_devices(apollon_devices, ARRAY_SIZE(apollon_devices));
omap_serial_init();
omap_sdrc_init(NULL, NULL);
omap_display_init(&apollon_dss_data);
}
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
......
......@@ -43,6 +43,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <mach/hardware.h>
......@@ -242,8 +243,7 @@ static struct omap_dss_device cm_t35_lcd_device = {
.phy.dpi.data_lines = 18,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = cm_t35_panel_enable_dvi,
.platform_disable = cm_t35_panel_disable_dvi,
};
......@@ -251,7 +251,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device cm_t35_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -47,6 +47,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
......@@ -139,7 +140,7 @@ static struct regulator_consumer_supply devkit8000_vio_supply[] = {
};
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.name = "innolux_at070tn83",
.platform_enable = devkit8000_panel_enable_lcd,
.platform_disable = devkit8000_panel_disable_lcd,
};
......@@ -152,8 +153,7 @@ static struct omap_dss_device devkit8000_lcd_device = {
.phy.dpi.data_lines = 24,
};
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = devkit8000_panel_enable_dvi,
.platform_disable = devkit8000_panel_disable_dvi,
};
......@@ -161,7 +161,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device devkit8000_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......@@ -267,7 +267,7 @@ static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
static struct regulator_consumer_supply devkit8000_vpll1_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
......
......@@ -40,6 +40,9 @@
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "mux.h"
#include "control.h"
......@@ -157,17 +160,33 @@ static struct platform_device h4_kp_device = {
},
};
static struct platform_device h4_lcd_device = {
.name = "lcd_h4",
.id = -1,
};
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
&h4_kp_device,
};
static struct panel_generic_dpi_data h4_panel_data = {
.name = "h4",
};
static struct omap_dss_device h4_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 16,
.data = &h4_panel_data,
};
static struct omap_dss_device *h4_dss_devices[] = {
&h4_lcd_device,
};
static struct omap_dss_board_info h4_dss_data = {
.num_devices = ARRAY_SIZE(h4_dss_devices),
.devices = h4_dss_devices,
.default_device = &h4_lcd_device,
};
/* 2420 Sysboot setup (2430 is different) */
static u32 get_sysboot_value(void)
{
......@@ -271,10 +290,6 @@ static void __init h4_init_flash(void)
h4_flash_resource.end = base + SZ_64M - 1;
}
static struct omap_lcd_config h4_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_usb_config h4_usb_config __initdata = {
/* S1.10 OFF -- usb "download port"
* usb0 switched to Mini-B port and isp1105 transceiver;
......@@ -286,10 +301,6 @@ static struct omap_usb_config h4_usb_config __initdata = {
.hmc_mode = 0x00, /* 0:dev|otg 1:disable 2:disable */
};
static struct omap_board_config_kernel h4_config[] __initdata = {
{ OMAP_TAG_LCD, &h4_lcd_config },
};
static struct at24_platform_data m24c01 = {
.byte_len = SZ_1K / 8,
.page_size = 16,
......@@ -320,9 +331,6 @@ static void __init omap_h4_init(void)
{
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAF);
omap_board_config = h4_config;
omap_board_config_size = ARRAY_SIZE(h4_config);
/*
* Make sure the serial ports are muxed on at this point.
* You have to mux them off in device drivers later on
......@@ -362,6 +370,8 @@ static void __init omap_h4_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
h4_init_flash();
omap_display_init(&h4_dss_data);
}
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
......
......@@ -32,7 +32,7 @@
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/onenand.h>
#include "mux.h"
......@@ -455,16 +455,16 @@ static void igep2_disable_dvi(struct omap_dss_device *dssdev)
gpio_direction_output(IGEP2_GPIO_DVI_PUP, 0);
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = igep2_enable_dvi,
.platform_disable = igep2_disable_dvi,
.i2c_bus_num = 3,
};
static struct omap_dss_device igep2_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -27,6 +27,7 @@
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
......@@ -34,7 +35,6 @@
#include <asm/mach/map.h>
#include <plat/mcspi.h>
#include <mach/gpio.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/gpmc.h>
......@@ -44,6 +44,9 @@
#include <plat/usb.h>
#include <plat/gpmc-smsc911x.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
......@@ -180,23 +183,102 @@ static inline void __init ldp_init_smsc911x(void)
gpmc_smsc911x_init(&smsc911x_cfg);
}
static struct platform_device ldp_lcd_device = {
.name = "ldp_lcd",
.id = -1,
/* LCD */
static int ldp_backlight_gpio;
static int ldp_lcd_enable_gpio;
#define LCD_PANEL_RESET_GPIO 55
#define LCD_PANEL_QVGA_GPIO 56
static int ldp_panel_enable_lcd(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(ldp_lcd_enable_gpio))
gpio_direction_output(ldp_lcd_enable_gpio, 1);
if (gpio_is_valid(ldp_backlight_gpio))
gpio_direction_output(ldp_backlight_gpio, 1);
return 0;
}
static void ldp_panel_disable_lcd(struct omap_dss_device *dssdev)
{
if (gpio_is_valid(ldp_lcd_enable_gpio))
gpio_direction_output(ldp_lcd_enable_gpio, 0);
if (gpio_is_valid(ldp_backlight_gpio))
gpio_direction_output(ldp_backlight_gpio, 0);
}
static struct panel_generic_dpi_data ldp_panel_data = {
.name = "nec_nl2432dr22-11b",
.platform_enable = ldp_panel_enable_lcd,
.platform_disable = ldp_panel_disable_lcd,
};
static struct omap_lcd_config ldp_lcd_config __initdata = {
.ctrl_name = "internal",
static struct omap_dss_device ldp_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.type = OMAP_DISPLAY_TYPE_DPI,
.phy.dpi.data_lines = 18,
.data = &ldp_panel_data,
};
static struct omap_dss_device *ldp_dss_devices[] = {
&ldp_lcd_device,
};
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_LCD, &ldp_lcd_config },
static struct omap_dss_board_info ldp_dss_data = {
.num_devices = ARRAY_SIZE(ldp_dss_devices),
.devices = ldp_dss_devices,
.default_device = &ldp_lcd_device,
};
static void __init ldp_display_init(void)
{
int r;
static struct gpio gpios[] __initdata = {
{LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"},
{LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"},
};
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
if (r) {
pr_err("Cannot request LCD GPIOs, error %d\n", r);
return;
}
omap_display_init(&ldp_dss_data);
}
static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
{
int r;
struct gpio gpios[] = {
{gpio + 7 , GPIOF_OUT_INIT_LOW, "LCD ENABLE"},
{gpio + 15, GPIOF_OUT_INIT_LOW, "LCD BACKLIGHT"},
};
r = gpio_request_array(gpios, ARRAY_SIZE(gpios));
if (r) {
pr_err("Cannot request LCD GPIOs, error %d\n", r);
ldp_backlight_gpio = -EINVAL;
ldp_lcd_enable_gpio = -EINVAL;
return r;
}
ldp_backlight_gpio = gpio + 15;
ldp_lcd_enable_gpio = gpio + 7;
return 0;
}
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
.setup = ldp_twl_gpio_setup,
};
static struct regulator_consumer_supply ldp_vmmc1_supply[] = {
......@@ -238,10 +320,31 @@ static struct regulator_init_data ldp_vaux1 = {
.consumer_supplies = ldp_vaux1_supplies,
};
static struct regulator_consumer_supply ldp_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
};
static struct regulator_init_data ldp_vpll2 = {
.constraints = {
.name = "VDVI",
.min_uV = 1800000,
.max_uV = 1800000,
.apply_uV = true,
.valid_modes_mask = REGULATOR_MODE_NORMAL
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies),
.consumer_supplies = ldp_vpll2_supplies,
};
static struct twl4030_platform_data ldp_twldata = {
/* platform_data for children goes here */
.vmmc1 = &ldp_vmmc1,
.vaux1 = &ldp_vaux1,
.vpll2 = &ldp_vpll2,
.gpio = &ldp_gpio_data,
.keypad = &ldp_kp_twl4030_data,
};
......@@ -267,7 +370,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {
};
static struct platform_device *ldp_devices[] __initdata = {
&ldp_lcd_device,
&ldp_gpio_keys_device,
};
......@@ -312,8 +414,6 @@ static struct mtd_partition ldp_nand_partitions[] = {
static void __init omap_ldp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
ldp_init_smsc911x();
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
......@@ -325,6 +425,7 @@ static void __init omap_ldp_init(void)
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
omap2_hsmmc_init(mmc);
ldp_display_init();
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
......
......@@ -42,7 +42,7 @@
#include <plat/board.h>
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <plat/nand.h>
#include <plat/usb.h>
......@@ -203,16 +203,16 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
gpio_set_value(dssdev->reset_gpio, 0);
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = beagle_enable_dvi,
.platform_disable = beagle_disable_dvi,
.i2c_bus_num = 3,
};
static struct omap_dss_device beagle_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = -EINVAL,
......
......@@ -45,7 +45,7 @@
#include <plat/common.h>
#include <plat/mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
......@@ -247,8 +247,7 @@ static void omap3_evm_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_evm_enable_dvi,
.platform_disable = omap3_evm_disable_dvi,
};
......@@ -256,7 +255,7 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device omap3_evm_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -335,7 +335,7 @@ static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
static struct regulator_consumer_supply pandora_vdds_supplies[] = {
REGULATOR_SUPPLY("vdds_sdi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = {
......
......@@ -41,6 +41,7 @@
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/mcspi.h>
#include <linux/input/matrix_keypad.h>
......@@ -107,39 +108,6 @@ static void __init omap3_stalker_display_init(void)
return;
}
static int omap3_stalker_enable_lcd(struct omap_dss_device *dssdev)
{
if (dvi_enabled) {
printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
return -EINVAL;
}
gpio_set_value(DSS_ENABLE_GPIO, 1);
gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 1);
lcd_enabled = 1;
return 0;
}
static void omap3_stalker_disable_lcd(struct omap_dss_device *dssdev)
{
gpio_set_value(DSS_ENABLE_GPIO, 0);
gpio_set_value(LCD_PANEL_BKLIGHT_GPIO, 0);
lcd_enabled = 0;
}
static struct panel_generic_dpi_data lcd_panel = {
.name = "generic",
.platform_enable = omap3_stalker_enable_lcd,
.platform_disable = omap3_stalker_disable_lcd,
};
static struct omap_dss_device omap3_stalker_lcd_device = {
.name = "lcd",
.driver_name = "generic_dpi_panel",
.data = &lcd_panel,
.phy.dpi.data_lines = 24,
.type = OMAP_DISPLAY_TYPE_DPI,
};
static int omap3_stalker_enable_tv(struct omap_dss_device *dssdev)
{
return 0;
......@@ -179,8 +147,7 @@ static void omap3_stalker_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = omap3_stalker_enable_dvi,
.platform_disable = omap3_stalker_disable_dvi,
};
......@@ -188,13 +155,12 @@ static struct panel_generic_dpi_data dvi_panel = {
static struct omap_dss_device omap3_stalker_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
static struct omap_dss_device *omap3_stalker_dss_devices[] = {
&omap3_stalker_lcd_device,
&omap3_stalker_tv_device,
&omap3_stalker_dvi_device,
};
......
......@@ -104,15 +104,6 @@ static struct omap2_hsmmc_info mmc[] = {
{} /* Terminator */
};
static struct platform_device omap3_touchbook_lcd_device = {
.name = "omap3touchbook_lcd",
.id = -1,
};
static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct regulator_consumer_supply touchbook_vmmc1_supply[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
};
......@@ -165,14 +156,12 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = {
static struct regulator_consumer_supply touchbook_vdac_supply[] = {
{
.supply = "vdac",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
static struct regulator_consumer_supply touchbook_vdvi_supply[] = {
{
.supply = "vdvi",
.dev = &omap3_touchbook_lcd_device.dev,
},
};
......@@ -316,10 +305,6 @@ static struct platform_device keys_gpio = {
},
};
static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
{ OMAP_TAG_LCD, &omap3_touchbook_lcd_config },
};
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
......@@ -327,7 +312,6 @@ static struct omap_board_mux board_mux[] __initdata = {
#endif
static struct platform_device *omap3_touchbook_devices[] __initdata = {
&omap3_touchbook_lcd_device,
&leds_gpio,
&keys_gpio,
};
......@@ -364,8 +348,6 @@ early_param("tbr", early_touchbook_revision);
static void __init omap3_touchbook_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = omap3_touchbook_config;
omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
pm_power_off = omap3_touchbook_poweroff;
......
......@@ -40,7 +40,7 @@
#include <plat/common.h>
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include "hsmmc.h"
#include "control.h"
......@@ -449,16 +449,16 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
}
/* Using generic display panel */
static struct panel_generic_dpi_data omap4_dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data omap4_dvi_panel = {
.platform_enable = omap4_panda_enable_dvi,
.platform_disable = omap4_panda_disable_dvi,
.i2c_bus_num = 3,
};
struct omap_dss_device omap4_panda_dvi_device = {
.type = OMAP_DISPLAY_TYPE_DPI,
.name = "dvi",
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &omap4_dvi_panel,
.phy.dpi.data_lines = 24,
.reset_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
......
......@@ -46,6 +46,7 @@
#include <plat/common.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-dvi.h>
#include <plat/gpmc.h>
#include <mach/hardware.h>
#include <plat/nand.h>
......@@ -182,16 +183,16 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
dvi_enabled = 0;
}
static struct panel_generic_dpi_data dvi_panel = {
.name = "generic",
static struct panel_dvi_platform_data dvi_panel = {
.platform_enable = overo_panel_enable_dvi,
.platform_disable = overo_panel_disable_dvi,
.i2c_bus_num = 3,
};
static struct omap_dss_device overo_dvi_device = {
.name = "dvi",
.type = OMAP_DISPLAY_TYPE_DPI,
.driver_name = "generic_dpi_panel",
.driver_name = "dvi",
.data = &dvi_panel,
.phy.dpi.data_lines = 24,
};
......
......@@ -79,29 +79,6 @@ static struct cpuidle_params rx51_cpuidle_params[] = {
{7505 + 15274, 484329, 1},
};
static struct omap_lcd_config rx51_lcd_config = {
.ctrl_name = "internal",
};
static struct omap_fbmem_config rx51_fbmem0_config = {
.size = 752 * 1024,
};
static struct omap_fbmem_config rx51_fbmem1_config = {
.size = 752 * 1024,
};
static struct omap_fbmem_config rx51_fbmem2_config = {
.size = 752 * 1024,
};
static struct omap_board_config_kernel rx51_config[] = {
{ OMAP_TAG_FBMEM, &rx51_fbmem0_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem1_config },
{ OMAP_TAG_FBMEM, &rx51_fbmem2_config },
{ OMAP_TAG_LCD, &rx51_lcd_config },
};
extern void __init rx51_peripherals_init(void);
#ifdef CONFIG_OMAP_MUX
......@@ -121,8 +98,6 @@ static void __init rx51_init(void)
struct omap_sdrc_params *sdrc_params;
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap_board_config = rx51_config;
omap_board_config_size = ARRAY_SIZE(rx51_config);
omap3_pm_init_cpuidle(rx51_cpuidle_params);
omap_serial_init();
......
......@@ -27,6 +27,8 @@
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include "control.h"
static struct platform_device omap_display_device = {
.name = "omapdss",
.id = -1,
......@@ -61,7 +63,7 @@ static const struct omap_dss_hwmod_data omap3_dss_hwmod_data[] __initdata = {
{ "dss_dispc", "omapdss_dispc", -1 },
{ "dss_rfbi", "omapdss_rfbi", -1 },
{ "dss_venc", "omapdss_venc", -1 },
{ "dss_dsi1", "omapdss_dsi1", -1 },
{ "dss_dsi1", "omapdss_dsi", 0 },
};
static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
......@@ -69,11 +71,58 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = {
{ "dss_dispc", "omapdss_dispc", -1 },
{ "dss_rfbi", "omapdss_rfbi", -1 },
{ "dss_venc", "omapdss_venc", -1 },
{ "dss_dsi1", "omapdss_dsi1", -1 },
{ "dss_dsi2", "omapdss_dsi2", -1 },
{ "dss_dsi1", "omapdss_dsi", 0 },
{ "dss_dsi2", "omapdss_dsi", 1 },
{ "dss_hdmi", "omapdss_hdmi", -1 },
};
static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
{
u32 enable_mask, enable_shift;
u32 pipd_mask, pipd_shift;
u32 reg;
if (dsi_id == 0) {
enable_mask = OMAP4_DSI1_LANEENABLE_MASK;
enable_shift = OMAP4_DSI1_LANEENABLE_SHIFT;
pipd_mask = OMAP4_DSI1_PIPD_MASK;
pipd_shift = OMAP4_DSI1_PIPD_SHIFT;
} else if (dsi_id == 1) {
enable_mask = OMAP4_DSI2_LANEENABLE_MASK;
enable_shift = OMAP4_DSI2_LANEENABLE_SHIFT;
pipd_mask = OMAP4_DSI2_PIPD_MASK;
pipd_shift = OMAP4_DSI2_PIPD_SHIFT;
} else {
return -ENODEV;
}
reg = omap4_ctrl_pad_readl(OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
reg &= ~enable_mask;
reg &= ~pipd_mask;
reg |= (lanes << enable_shift) & enable_mask;
reg |= (lanes << pipd_shift) & pipd_mask;
omap4_ctrl_pad_writel(reg, OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY);
return 0;
}
static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
return omap4_dsi_mux_pads(dsi_id, lane_mask);
return 0;
}
static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
{
if (cpu_is_omap44xx())
omap4_dsi_mux_pads(dsi_id, 0);
}
int __init omap_display_init(struct omap_dss_board_info *board_data)
{
int r = 0;
......@@ -96,6 +145,11 @@ int __init omap_display_init(struct omap_dss_board_info *board_data)
oh_count = ARRAY_SIZE(omap4_dss_hwmod_data);
}
if (board_data->dsi_enable_pads == NULL)
board_data->dsi_enable_pads = omap_dsi_enable_pads;
if (board_data->dsi_disable_pads == NULL)
board_data->dsi_disable_pads = omap_dsi_disable_pads;
pdata.board_data = board_data;
pdata.board_data->get_context_loss_count =
omap_pm_get_dev_context_loss_count;
......
......@@ -99,7 +99,7 @@ static struct regulator_init_data omap3_vdac_idata = {
static struct regulator_consumer_supply omap3_vpll2_supplies[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
};
static struct regulator_init_data omap3_vpll2_idata = {
......@@ -235,6 +235,12 @@ static struct regulator_init_data omap4_vana_idata = {
},
};
static struct regulator_consumer_supply omap4_vcxio_supply[] = {
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dss"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"),
REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.1"),
};
static struct regulator_init_data omap4_vcxio_idata = {
.constraints = {
.min_uV = 1800000,
......@@ -243,7 +249,10 @@ static struct regulator_init_data omap4_vcxio_idata = {
| REGULATOR_MODE_STANDBY,
.valid_ops_mask = REGULATOR_CHANGE_MODE
| REGULATOR_CHANGE_STATUS,
.always_on = true,
},
.num_consumer_supplies = ARRAY_SIZE(omap4_vcxio_supply),
.consumer_supplies = omap4_vcxio_supply,
};
static struct regulator_init_data omap4_vusb_idata = {
......
......@@ -400,7 +400,6 @@ static int omapvid_setup_overlay(struct omap_vout_device *vout,
ovl->get_overlay_info(ovl, &info);
info.paddr = addr;
info.vaddr = NULL;
info.width = cropwidth;
info.height = cropheight;
info.color_mode = vout->dss_mode;
......@@ -1165,12 +1164,17 @@ static int vidioc_try_fmt_vid_overlay(struct file *file, void *fh,
{
int ret = 0;
struct omap_vout_device *vout = fh;
struct omap_overlay *ovl;
struct omapvideo_info *ovid;
struct v4l2_window *win = &f->fmt.win;
ovid = &vout->vid_info;
ovl = ovid->overlays[0];
ret = omap_vout_try_window(&vout->fbuf, win);
if (!ret) {
if (vout->vid == OMAP_VIDEO1)
if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
win->global_alpha = 255;
else
win->global_alpha = f->fmt.win.global_alpha;
......@@ -1194,8 +1198,8 @@ static int vidioc_s_fmt_vid_overlay(struct file *file, void *fh,
ret = omap_vout_new_window(&vout->crop, &vout->win, &vout->fbuf, win);
if (!ret) {
/* Video1 plane does not support global alpha */
if (ovl->id == OMAP_DSS_VIDEO1)
/* Video1 plane does not support global alpha on OMAP3 */
if ((ovl->caps & OMAP_DSS_OVL_CAP_GLOBAL_ALPHA) == 0)
vout->win.global_alpha = 255;
else
vout->win.global_alpha = f->fmt.win.global_alpha;
......@@ -1788,7 +1792,9 @@ static int vidioc_s_fbuf(struct file *file, void *fh,
if (ovl->manager && ovl->manager->get_manager_info &&
ovl->manager->set_manager_info) {
ovl->manager->get_manager_info(ovl->manager, &info);
info.alpha_enabled = enable;
/* enable this only if there is no zorder cap */
if ((ovl->caps & OMAP_DSS_OVL_CAP_ZORDER) == 0)
info.partial_alpha_enabled = enable;
if (ovl->manager->set_manager_info(ovl->manager, &info))
return -EINVAL;
}
......@@ -1820,7 +1826,7 @@ static int vidioc_g_fbuf(struct file *file, void *fh,
}
if (ovl->manager && ovl->manager->get_manager_info) {
ovl->manager->get_manager_info(ovl->manager, &info);
if (info.alpha_enabled)
if (info.partial_alpha_enabled)
a->flags |= V4L2_FBUF_FLAG_LOCAL_ALPHA;
}
......
......@@ -9,35 +9,6 @@ config FB_OMAP
help
Frame buffer driver for OMAP based boards.
config FB_OMAP_LCD_VGA
bool "Use LCD in VGA mode"
depends on MACH_OMAP_3430SDP || MACH_OMAP_LDP
help
Set LCD resolution as VGA (640 X 480).
Default resolution without this option is QVGA(320 X 240).
Please take a look at drivers/video/omap/lcd_ldp.c file
for lcd driver code.
choice
depends on FB_OMAP && MACH_OVERO
prompt "Screen resolution"
default FB_OMAP_079M3R
help
Selected desired screen resolution
config FB_OMAP_031M3R
boolean "640 x 480 @ 60 Hz Reduced blanking"
config FB_OMAP_048M3R
boolean "800 x 600 @ 60 Hz Reduced blanking"
config FB_OMAP_079M3R
boolean "1024 x 768 @ 60 Hz Reduced blanking"
config FB_OMAP_092M9R
boolean "1280 x 720 @ 60 Hz Reduced blanking"
endchoice
config FB_OMAP_LCDC_EXTERNAL
bool "External LCD controller support"
depends on FB_OMAP
......
......@@ -17,7 +17,6 @@ objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
objs-y$(CONFIG_FB_OMAP_LCDC_BLIZZARD) += blizzard.o
objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
objs-y$(CONFIG_MACH_OMAP_H4) += lcd_h4.o
objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
......@@ -26,14 +25,7 @@ objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
objs-y$(CONFIG_MACH_OMAP_APOLLON) += lcd_apollon.o
objs-y$(CONFIG_MACH_OMAP_2430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP_3430SDP) += lcd_2430sdp.o
objs-y$(CONFIG_MACH_OMAP_LDP) += lcd_ldp.o
objs-y$(CONFIG_MACH_OMAP3EVM) += lcd_omap3evm.o
objs-y$(CONFIG_MACH_OMAP3_BEAGLE) += lcd_omap3beagle.o
objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
objs-y$(CONFIG_MACH_OVERO) += lcd_overo.o
objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
......
/*
* LCD panel support for the TI 2430SDP board
*
* Copyright (C) 2007 MontaVista
* Author: Hunyue Yau <hyau@mvista.com>
*
* Derived from drivers/video/omap/lcd-apollon.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include "omapfb.h"
#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO 91
#define SDP2430_LCD_PANEL_ENABLE_GPIO 154
#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 24
#define SDP3430_LCD_PANEL_ENABLE_GPIO 28
static unsigned backlight_gpio;
static unsigned enable_gpio;
#define LCD_PIXCLOCK_MAX 5400 /* freq 5.4 MHz */
#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
#define ENABLE_VAUX2_DEDICATED 0x09
#define ENABLE_VAUX2_DEV_GRP 0x20
#define ENABLE_VAUX3_DEDICATED 0x03
#define ENABLE_VAUX3_DEV_GRP 0x20
#define ENABLE_VPLL2_DEDICATED 0x05
#define ENABLE_VPLL2_DEV_GRP 0xE0
#define TWL4030_VPLL2_DEV_GRP 0x33
#define TWL4030_VPLL2_DEDICATED 0x36
#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
static int sdp2430_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
if (machine_is_omap_3430sdp()) {
enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO;
backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
} else {
enable_gpio = SDP2430_LCD_PANEL_ENABLE_GPIO;
backlight_gpio = SDP2430_LCD_PANEL_BACKLIGHT_GPIO;
}
gpio_request(enable_gpio, "LCD enable"); /* LCD panel */
gpio_request(backlight_gpio, "LCD bl"); /* LCD backlight */
gpio_direction_output(enable_gpio, 0);
gpio_direction_output(backlight_gpio, 0);
return 0;
}
static void sdp2430_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(backlight_gpio);
gpio_free(enable_gpio);
}
static int sdp2430_panel_enable(struct lcd_panel *panel)
{
u8 ded_val, ded_reg;
u8 grp_val, grp_reg;
if (machine_is_omap_3430sdp()) {
ded_reg = TWL4030_VAUX3_DEDICATED;
ded_val = ENABLE_VAUX3_DEDICATED;
grp_reg = TWL4030_VAUX3_DEV_GRP;
grp_val = ENABLE_VAUX3_DEV_GRP;
if (omap_rev() > OMAP3430_REV_ES1_0) {
t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
TWL4030_VPLL2_DEDICATED);
t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
TWL4030_VPLL2_DEV_GRP);
}
} else {
ded_reg = TWL4030_VAUX2_DEDICATED;
ded_val = ENABLE_VAUX2_DEDICATED;
grp_reg = TWL4030_VAUX2_DEV_GRP;
grp_val = ENABLE_VAUX2_DEV_GRP;
}
gpio_set_value(enable_gpio, 1);
gpio_set_value(backlight_gpio, 1);
if (0 != t2_out(PM_RECEIVER, ded_val, ded_reg))
return -EIO;
if (0 != t2_out(PM_RECEIVER, grp_val, grp_reg))
return -EIO;
return 0;
}
static void sdp2430_panel_disable(struct lcd_panel *panel)
{
gpio_set_value(enable_gpio, 0);
gpio_set_value(backlight_gpio, 0);
if (omap_rev() > OMAP3430_REV_ES1_0) {
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
msleep(4);
}
}
static unsigned long sdp2430_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel sdp2430_panel = {
.name = "sdp2430",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC,
.bpp = 16,
.data_lines = 16,
.x_res = 240,
.y_res = 320,
.hsw = 3, /* hsync_len (4) - 1 */
.hfp = 3, /* right_margin (4) - 1 */
.hbp = 39, /* left_margin (40) - 1 */
.vsw = 1, /* vsync_len (2) - 1 */
.vfp = 2, /* lower_margin */
.vbp = 7, /* upper_margin (8) - 1 */
.pixel_clock = LCD_PIXCLOCK_MAX,
.init = sdp2430_panel_init,
.cleanup = sdp2430_panel_cleanup,
.enable = sdp2430_panel_enable,
.disable = sdp2430_panel_disable,
.get_caps = sdp2430_panel_get_caps,
};
static int sdp2430_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&sdp2430_panel);
return 0;
}
static int sdp2430_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int sdp2430_panel_suspend(struct platform_device *pdev,
pm_message_t mesg)
{
return 0;
}
static int sdp2430_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver sdp2430_panel_driver = {
.probe = sdp2430_panel_probe,
.remove = sdp2430_panel_remove,
.suspend = sdp2430_panel_suspend,
.resume = sdp2430_panel_resume,
.driver = {
.name = "sdp2430_lcd",
.owner = THIS_MODULE,
},
};
static int __init sdp2430_panel_drv_init(void)
{
return platform_driver_register(&sdp2430_panel_driver);
}
static void __exit sdp2430_panel_drv_exit(void)
{
platform_driver_unregister(&sdp2430_panel_driver);
}
module_init(sdp2430_panel_drv_init);
module_exit(sdp2430_panel_drv_exit);
/*
* LCD panel support for the Samsung OMAP2 Apollon board
*
* Copyright (C) 2005,2006 Samsung Electronics
* Author: Kyungmin Park <kyungmin.park@samsung.com>
*
* Derived from drivers/video/omap/lcd-h4.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <mach/gpio.h>
#include "omapfb.h"
/* #define USE_35INCH_LCD 1 */
static int apollon_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
return 0;
}
static void apollon_panel_cleanup(struct lcd_panel *panel)
{
}
static int apollon_panel_enable(struct lcd_panel *panel)
{
return 0;
}
static void apollon_panel_disable(struct lcd_panel *panel)
{
}
static unsigned long apollon_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel apollon_panel = {
.name = "apollon",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC,
.bpp = 16,
.data_lines = 18,
#ifdef USE_35INCH_LCD
.x_res = 240,
.y_res = 320,
.hsw = 2,
.hfp = 3,
.hbp = 9,
.vsw = 4,
.vfp = 3,
.vbp = 5,
#else
.x_res = 480,
.y_res = 272,
.hsw = 41,
.hfp = 2,
.hbp = 2,
.vsw = 10,
.vfp = 2,
.vbp = 2,
#endif
.pixel_clock = 6250,
.init = apollon_panel_init,
.cleanup = apollon_panel_cleanup,
.enable = apollon_panel_enable,
.disable = apollon_panel_disable,
.get_caps = apollon_panel_get_caps,
};
static int apollon_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&apollon_panel);
return 0;
}
static int apollon_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int apollon_panel_suspend(struct platform_device *pdev,
pm_message_t mesg)
{
return 0;
}
static int apollon_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver apollon_panel_driver = {
.probe = apollon_panel_probe,
.remove = apollon_panel_remove,
.suspend = apollon_panel_suspend,
.resume = apollon_panel_resume,
.driver = {
.name = "apollon_lcd",
.owner = THIS_MODULE,
},
};
static int __init apollon_panel_drv_init(void)
{
return platform_driver_register(&apollon_panel_driver);
}
static void __exit apollon_panel_drv_exit(void)
{
platform_driver_unregister(&apollon_panel_driver);
}
module_init(apollon_panel_drv_init);
module_exit(apollon_panel_drv_exit);
/*
* LCD panel support for the TI OMAP H4 board
*
* Copyright (C) 2004 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include "omapfb.h"
static int h4_panel_init(struct lcd_panel *panel, struct omapfb_device *fbdev)
{
return 0;
}
static void h4_panel_cleanup(struct lcd_panel *panel)
{
}
static int h4_panel_enable(struct lcd_panel *panel)
{
return 0;
}
static void h4_panel_disable(struct lcd_panel *panel)
{
}
static unsigned long h4_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
static struct lcd_panel h4_panel = {
.name = "h4",
.config = OMAP_LCDC_PANEL_TFT,
.bpp = 16,
.data_lines = 16,
.x_res = 240,
.y_res = 320,
.pixel_clock = 6250,
.hsw = 15,
.hfp = 15,
.hbp = 60,
.vsw = 1,
.vfp = 1,
.vbp = 1,
.init = h4_panel_init,
.cleanup = h4_panel_cleanup,
.enable = h4_panel_enable,
.disable = h4_panel_disable,
.get_caps = h4_panel_get_caps,
};
static int h4_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&h4_panel);
return 0;
}
static int h4_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int h4_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
{
return 0;
}
static int h4_panel_resume(struct platform_device *pdev)
{
return 0;
}
static struct platform_driver h4_panel_driver = {
.probe = h4_panel_probe,
.remove = h4_panel_remove,
.suspend = h4_panel_suspend,
.resume = h4_panel_resume,
.driver = {
.name = "lcd_h4",
.owner = THIS_MODULE,
},
};
static int __init h4_panel_drv_init(void)
{
return platform_driver_register(&h4_panel_driver);
}
static void __exit h4_panel_drv_cleanup(void)
{
platform_driver_unregister(&h4_panel_driver);
}
module_init(h4_panel_drv_init);
module_exit(h4_panel_drv_cleanup);
/*
* LCD panel support for the TI LDP board
*
* Copyright (C) 2007 WindRiver
* Author: Stanley Miao <stanley.miao@windriver.com>
*
* Derived from drivers/video/omap/lcd-2430sdp.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/i2c/twl.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include "omapfb.h"
#define LCD_PANEL_BACKLIGHT_GPIO (15 + OMAP_MAX_GPIO_LINES)
#define LCD_PANEL_ENABLE_GPIO (7 + OMAP_MAX_GPIO_LINES)
#define LCD_PANEL_RESET_GPIO 55
#define LCD_PANEL_QVGA_GPIO 56
#ifdef CONFIG_FB_OMAP_LCD_VGA
#define LCD_XRES 480
#define LCD_YRES 640
#define LCD_PIXCLOCK_MAX 41700
#else
#define LCD_XRES 240
#define LCD_YRES 320
#define LCD_PIXCLOCK_MAX 185186
#endif
#define PM_RECEIVER TWL4030_MODULE_PM_RECEIVER
#define ENABLE_VAUX2_DEDICATED 0x09
#define ENABLE_VAUX2_DEV_GRP 0x20
#define ENABLE_VAUX3_DEDICATED 0x03
#define ENABLE_VAUX3_DEV_GRP 0x20
#define ENABLE_VPLL2_DEDICATED 0x05
#define ENABLE_VPLL2_DEV_GRP 0xE0
#define TWL4030_VPLL2_DEV_GRP 0x33
#define TWL4030_VPLL2_DEDICATED 0x36
#define t2_out(c, r, v) twl_i2c_write_u8(c, r, v)
static int ldp_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
gpio_request(LCD_PANEL_RESET_GPIO, "lcd reset");
gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga");
gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd panel");
gpio_request(LCD_PANEL_BACKLIGHT_GPIO, "lcd backlight");
gpio_direction_output(LCD_PANEL_QVGA_GPIO, 0);
gpio_direction_output(LCD_PANEL_RESET_GPIO, 0);
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
#ifdef CONFIG_FB_OMAP_LCD_VGA
gpio_set_value(LCD_PANEL_QVGA_GPIO, 0);
#else
gpio_set_value(LCD_PANEL_QVGA_GPIO, 1);
#endif
gpio_set_value(LCD_PANEL_RESET_GPIO, 1);
return 0;
}
static void ldp_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(LCD_PANEL_BACKLIGHT_GPIO);
gpio_free(LCD_PANEL_ENABLE_GPIO);
gpio_free(LCD_PANEL_QVGA_GPIO);
gpio_free(LCD_PANEL_RESET_GPIO);
}
static int ldp_panel_enable(struct lcd_panel *panel)
{
if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEDICATED,
TWL4030_VPLL2_DEDICATED))
return -EIO;
if (0 != t2_out(PM_RECEIVER, ENABLE_VPLL2_DEV_GRP,
TWL4030_VPLL2_DEV_GRP))
return -EIO;
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 1);
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 1);
if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEDICATED,
TWL4030_VAUX3_DEDICATED))
return -EIO;
if (0 != t2_out(PM_RECEIVER, ENABLE_VAUX3_DEV_GRP,
TWL4030_VAUX3_DEV_GRP))
return -EIO;
return 0;
}
static void ldp_panel_disable(struct lcd_panel *panel)
{
gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0);
gpio_direction_output(LCD_PANEL_BACKLIGHT_GPIO, 0);
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEDICATED);
t2_out(PM_RECEIVER, 0x0, TWL4030_VPLL2_DEV_GRP);
msleep(4);
}
static unsigned long ldp_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel ldp_panel = {
.name = "ldp",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC,
.bpp = 16,
.data_lines = 18,
.x_res = LCD_XRES,
.y_res = LCD_YRES,
.hsw = 3, /* hsync_len (4) - 1 */
.hfp = 3, /* right_margin (4) - 1 */
.hbp = 39, /* left_margin (40) - 1 */
.vsw = 1, /* vsync_len (2) - 1 */
.vfp = 2, /* lower_margin */
.vbp = 7, /* upper_margin (8) - 1 */
.pixel_clock = LCD_PIXCLOCK_MAX,
.init = ldp_panel_init,
.cleanup = ldp_panel_cleanup,
.enable = ldp_panel_enable,
.disable = ldp_panel_disable,
.get_caps = ldp_panel_get_caps,
};
static int ldp_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&ldp_panel);
return 0;
}
static int ldp_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int ldp_panel_suspend(struct platform_device *pdev, pm_message_t mesg)
{
return 0;
}
static int ldp_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver ldp_panel_driver = {
.probe = ldp_panel_probe,
.remove = ldp_panel_remove,
.suspend = ldp_panel_suspend,
.resume = ldp_panel_resume,
.driver = {
.name = "ldp_lcd",
.owner = THIS_MODULE,
},
};
static int __init ldp_panel_drv_init(void)
{
return platform_driver_register(&ldp_panel_driver);
}
static void __exit ldp_panel_drv_exit(void)
{
platform_driver_unregister(&ldp_panel_driver);
}
module_init(ldp_panel_drv_init);
module_exit(ldp_panel_drv_exit);
/*
* LCD panel support for the TI OMAP3 Beagle board
*
* Author: Koen Kooi <koen@openembedded.org>
*
* Derived from drivers/video/omap/lcd-omap3evm.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <asm/mach-types.h>
#include "omapfb.h"
#define LCD_PANEL_ENABLE_GPIO 170
static int omap3beagle_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
gpio_request(LCD_PANEL_ENABLE_GPIO, "LCD enable");
return 0;
}
static void omap3beagle_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(LCD_PANEL_ENABLE_GPIO);
}
static int omap3beagle_panel_enable(struct lcd_panel *panel)
{
gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
return 0;
}
static void omap3beagle_panel_disable(struct lcd_panel *panel)
{
gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
}
static unsigned long omap3beagle_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel omap3beagle_panel = {
.name = "omap3beagle",
.config = OMAP_LCDC_PANEL_TFT,
.bpp = 16,
.data_lines = 24,
.x_res = 1024,
.y_res = 768,
.hsw = 3, /* hsync_len (4) - 1 */
.hfp = 3, /* right_margin (4) - 1 */
.hbp = 39, /* left_margin (40) - 1 */
.vsw = 1, /* vsync_len (2) - 1 */
.vfp = 2, /* lower_margin */
.vbp = 7, /* upper_margin (8) - 1 */
.pixel_clock = 64000,
.init = omap3beagle_panel_init,
.cleanup = omap3beagle_panel_cleanup,
.enable = omap3beagle_panel_enable,
.disable = omap3beagle_panel_disable,
.get_caps = omap3beagle_panel_get_caps,
};
static int omap3beagle_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&omap3beagle_panel);
return 0;
}
static int omap3beagle_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int omap3beagle_panel_suspend(struct platform_device *pdev,
pm_message_t mesg)
{
return 0;
}
static int omap3beagle_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver omap3beagle_panel_driver = {
.probe = omap3beagle_panel_probe,
.remove = omap3beagle_panel_remove,
.suspend = omap3beagle_panel_suspend,
.resume = omap3beagle_panel_resume,
.driver = {
.name = "omap3beagle_lcd",
.owner = THIS_MODULE,
},
};
static int __init omap3beagle_panel_drv_init(void)
{
return platform_driver_register(&omap3beagle_panel_driver);
}
static void __exit omap3beagle_panel_drv_exit(void)
{
platform_driver_unregister(&omap3beagle_panel_driver);
}
module_init(omap3beagle_panel_drv_init);
module_exit(omap3beagle_panel_drv_exit);
/*
* LCD panel support for the TI OMAP3 EVM board
*
* Author: Steve Sakoman <steve@sakoman.com>
*
* Derived from drivers/video/omap/lcd-apollon.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include "omapfb.h"
#define LCD_PANEL_ENABLE_GPIO 153
#define LCD_PANEL_LR 2
#define LCD_PANEL_UD 3
#define LCD_PANEL_INI 152
#define LCD_PANEL_QVGA 154
#define LCD_PANEL_RESB 155
#define ENABLE_VDAC_DEDICATED 0x03
#define ENABLE_VDAC_DEV_GRP 0x20
#define ENABLE_VPLL2_DEDICATED 0x05
#define ENABLE_VPLL2_DEV_GRP 0xE0
#define TWL_LED_LEDEN 0x00
#define TWL_PWMA_PWMAON 0x00
#define TWL_PWMA_PWMAOFF 0x01
static unsigned int bklight_level;
static int omap3evm_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
gpio_request(LCD_PANEL_LR, "LCD lr");
gpio_request(LCD_PANEL_UD, "LCD ud");
gpio_request(LCD_PANEL_INI, "LCD ini");
gpio_request(LCD_PANEL_RESB, "LCD resb");
gpio_request(LCD_PANEL_QVGA, "LCD qvga");
gpio_direction_output(LCD_PANEL_RESB, 1);
gpio_direction_output(LCD_PANEL_INI, 1);
gpio_direction_output(LCD_PANEL_QVGA, 0);
gpio_direction_output(LCD_PANEL_LR, 1);
gpio_direction_output(LCD_PANEL_UD, 1);
twl_i2c_write_u8(TWL4030_MODULE_LED, 0x11, TWL_LED_LEDEN);
twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x01, TWL_PWMA_PWMAON);
twl_i2c_write_u8(TWL4030_MODULE_PWMA, 0x02, TWL_PWMA_PWMAOFF);
bklight_level = 100;
return 0;
}
static void omap3evm_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(LCD_PANEL_QVGA);
gpio_free(LCD_PANEL_RESB);
gpio_free(LCD_PANEL_INI);
gpio_free(LCD_PANEL_UD);
gpio_free(LCD_PANEL_LR);
}
static int omap3evm_panel_enable(struct lcd_panel *panel)
{
gpio_set_value(LCD_PANEL_ENABLE_GPIO, 0);
return 0;
}
static void omap3evm_panel_disable(struct lcd_panel *panel)
{
gpio_set_value(LCD_PANEL_ENABLE_GPIO, 1);
}
static unsigned long omap3evm_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
static int omap3evm_bklight_setlevel(struct lcd_panel *panel,
unsigned int level)
{
u8 c;
if ((level >= 0) && (level <= 100)) {
c = (125 * (100 - level)) / 100 + 2;
twl_i2c_write_u8(TWL4030_MODULE_PWMA, c, TWL_PWMA_PWMAOFF);
bklight_level = level;
}
return 0;
}
static unsigned int omap3evm_bklight_getlevel(struct lcd_panel *panel)
{
return bklight_level;
}
static unsigned int omap3evm_bklight_getmaxlevel(struct lcd_panel *panel)
{
return 100;
}
struct lcd_panel omap3evm_panel = {
.name = "omap3evm",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC,
.bpp = 16,
.data_lines = 18,
.x_res = 480,
.y_res = 640,
.hsw = 3, /* hsync_len (4) - 1 */
.hfp = 3, /* right_margin (4) - 1 */
.hbp = 39, /* left_margin (40) - 1 */
.vsw = 1, /* vsync_len (2) - 1 */
.vfp = 2, /* lower_margin */
.vbp = 7, /* upper_margin (8) - 1 */
.pixel_clock = 26000,
.init = omap3evm_panel_init,
.cleanup = omap3evm_panel_cleanup,
.enable = omap3evm_panel_enable,
.disable = omap3evm_panel_disable,
.get_caps = omap3evm_panel_get_caps,
.set_bklight_level = omap3evm_bklight_setlevel,
.get_bklight_level = omap3evm_bklight_getlevel,
.get_bklight_max = omap3evm_bklight_getmaxlevel,
};
static int omap3evm_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&omap3evm_panel);
return 0;
}
static int omap3evm_panel_remove(struct platform_device *pdev)
{
return 0;
}
static int omap3evm_panel_suspend(struct platform_device *pdev,
pm_message_t mesg)
{
return 0;
}
static int omap3evm_panel_resume(struct platform_device *pdev)
{
return 0;
}
struct platform_driver omap3evm_panel_driver = {
.probe = omap3evm_panel_probe,
.remove = omap3evm_panel_remove,
.suspend = omap3evm_panel_suspend,
.resume = omap3evm_panel_resume,
.driver = {
.name = "omap3evm_lcd",
.owner = THIS_MODULE,
},
};
static int __init omap3evm_panel_drv_init(void)
{
return platform_driver_register(&omap3evm_panel_driver);
}
static void __exit omap3evm_panel_drv_exit(void)
{
platform_driver_unregister(&omap3evm_panel_driver);
}
module_init(omap3evm_panel_drv_init);
module_exit(omap3evm_panel_drv_exit);
/*
* LCD panel support for the Gumstix Overo
*
* Author: Steve Sakoman <steve@sakoman.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <asm/mach-types.h>
#include "omapfb.h"
#define LCD_ENABLE 144
static int overo_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
if ((gpio_request(LCD_ENABLE, "LCD_ENABLE") == 0) &&
(gpio_direction_output(LCD_ENABLE, 1) == 0))
gpio_export(LCD_ENABLE, 0);
else
printk(KERN_ERR "could not obtain gpio for LCD_ENABLE\n");
return 0;
}
static void overo_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(LCD_ENABLE);
}
static int overo_panel_enable(struct lcd_panel *panel)
{
gpio_set_value(LCD_ENABLE, 1);
return 0;
}
static void overo_panel_disable(struct lcd_panel *panel)
{
gpio_set_value(LCD_ENABLE, 0);
}
static unsigned long overo_panel_get_caps(struct lcd_panel *panel)
{
return 0;
}
struct lcd_panel overo_panel = {
.name = "overo",
.config = OMAP_LCDC_PANEL_TFT,
.bpp = 16,
.data_lines = 24,
#if defined CONFIG_FB_OMAP_031M3R
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 640,
.y_res = 480,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
.pixel_clock = 23500,
#elif defined CONFIG_FB_OMAP_048M3R
/* 800 x 600 @ 60 Hz Reduced blanking VESA CVT 0.48M3-R */
.x_res = 800,
.y_res = 600,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 11,
.pixel_clock = 35500,
#elif defined CONFIG_FB_OMAP_079M3R
/* 1024 x 768 @ 60 Hz Reduced blanking VESA CVT 0.79M3-R */
.x_res = 1024,
.y_res = 768,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 15,
.pixel_clock = 56000,
#elif defined CONFIG_FB_OMAP_092M9R
/* 1280 x 720 @ 60 Hz Reduced blanking VESA CVT 0.92M9-R */
.x_res = 1280,
.y_res = 720,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 5,
.vbp = 13,
.pixel_clock = 64000,
#else
/* use 640 x 480 if no config option */
/* 640 x 480 @ 60 Hz Reduced blanking VESA CVT 0.31M3-R */
.x_res = 640,
.y_res = 480,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
.pixel_clock = 23500,
#endif
.init = overo_panel_init,
.cleanup = overo_panel_cleanup,
.enable = overo_panel_enable,
.disable = overo_panel_disable,
.get_caps = overo_panel_get_caps,
};
static int overo_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&overo_panel);
return 0;
}
static int overo_panel_remove(struct platform_device *pdev)
{
/* omapfb does not have unregister_panel */
return 0;
}
static struct platform_driver overo_panel_driver = {
.probe = overo_panel_probe,
.remove = overo_panel_remove,
.driver = {
.name = "overo_lcd",
.owner = THIS_MODULE,
},
};
static int __init overo_panel_drv_init(void)
{
return platform_driver_register(&overo_panel_driver);
}
static void __exit overo_panel_drv_exit(void)
{
platform_driver_unregister(&overo_panel_driver);
}
module_init(overo_panel_drv_init);
module_exit(overo_panel_drv_exit);
......@@ -10,6 +10,13 @@ config PANEL_GENERIC_DPI
Supports LCD Panel used in TI SDP3430 and EVM boards,
OMAP3517 EVM boards and CM-T35.
config PANEL_DVI
tristate "DVI output"
depends on OMAP2_DSS_DPI
help
Driver for external monitors, connected via DVI. The driver uses i2c
to read EDID information from the monitor.
config PANEL_LGPHILIPS_LB035Q02
tristate "LG.Philips LB035Q02 LCD Panel"
depends on OMAP2_DSS_DPI && SPI
......@@ -19,20 +26,30 @@ config PANEL_LGPHILIPS_LB035Q02
config PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 LCD Panel"
depends on OMAP2_DSS_DPI
select BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_CLASS_DEVICE
help
LCD Panel used in TI's SDP3430 and EVM boards
config PANEL_NEC_NL8048HL11_01B
tristate "NEC NL8048HL11-01B Panel"
depends on OMAP2_DSS_DPI
depends on SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This NEC NL8048HL11-01B panel is TFT LCD
used in the Zoom2/3/3630 sdp boards.
config PANEL_PICODLP
tristate "TI PICO DLP mini-projector"
depends on OMAP2_DSS && I2C
help
A mini-projector used in TI's SDP4430 and EVM boards
For more info please visit http://www.dlp.com/projector/
config PANEL_TAAL
tristate "Taal DSI Panel"
depends on OMAP2_DSS_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Taal DSI command mode panel from TPO.
......@@ -45,7 +62,14 @@ config PANEL_TPO_TD043MTEA1
config PANEL_ACX565AKM
tristate "ACX565AKM Panel"
depends on OMAP2_DSS_SDI && SPI
select BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N900
config PANEL_N8X0
tristate "N8X0 Panel"
depends on OMAP2_DSS_RFBI && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
This is the LCD panel used on Nokia N8x0
endmenu
obj-$(CONFIG_PANEL_GENERIC_DPI) += panel-generic-dpi.o
obj-$(CONFIG_PANEL_DVI) += panel-dvi.o
obj-$(CONFIG_PANEL_LGPHILIPS_LB035Q02) += panel-lgphilips-lb035q02.o
obj-$(CONFIG_PANEL_SHARP_LS037V7DW01) += panel-sharp-ls037v7dw01.o
obj-$(CONFIG_PANEL_NEC_NL8048HL11_01B) += panel-nec-nl8048hl11-01b.o
obj-$(CONFIG_PANEL_TAAL) += panel-taal.o
obj-$(CONFIG_PANEL_PICODLP) += panel-picodlp.o
obj-$(CONFIG_PANEL_TPO_TD043MTEA1) += panel-tpo-td043mtea1.o
obj-$(CONFIG_PANEL_ACX565AKM) += panel-acx565akm.o
obj-$(CONFIG_PANEL_N8X0) += panel-n8x0.o
/*
* DVI output support
*
* Copyright (C) 2011 Texas Instruments Inc
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <video/omapdss.h>
#include <linux/i2c.h>
#include <drm/drm_edid.h>
#include <video/omap-panel-dvi.h>
static const struct omap_video_timings panel_dvi_default_timings = {
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
};
struct panel_drv_data {
struct omap_dss_device *dssdev;
struct mutex lock;
};
static inline struct panel_dvi_platform_data
*get_pdata(const struct omap_dss_device *dssdev)
{
return dssdev->data;
}
static int panel_dvi_power_on(struct omap_dss_device *dssdev)
{
struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
int r;
if (dssdev->state == OMAP_DSS_DISPLAY_ACTIVE)
return 0;
r = omapdss_dpi_display_enable(dssdev);
if (r)
goto err0;
if (pdata->platform_enable) {
r = pdata->platform_enable(dssdev);
if (r)
goto err1;
}
return 0;
err1:
omapdss_dpi_display_disable(dssdev);
err0:
return r;
}
static void panel_dvi_power_off(struct omap_dss_device *dssdev)
{
struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
if (dssdev->state != OMAP_DSS_DISPLAY_ACTIVE)
return;
if (pdata->platform_disable)
pdata->platform_disable(dssdev);
omapdss_dpi_display_disable(dssdev);
}
static int panel_dvi_probe(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata;
ddata = kzalloc(sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
dssdev->panel.timings = panel_dvi_default_timings;
dssdev->panel.config = OMAP_DSS_LCD_TFT;
ddata->dssdev = dssdev;
mutex_init(&ddata->lock);
dev_set_drvdata(&dssdev->dev, ddata);
return 0;
}
static void __exit panel_dvi_remove(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
dev_set_drvdata(&dssdev->dev, NULL);
mutex_unlock(&ddata->lock);
kfree(ddata);
}
static int panel_dvi_enable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
int r;
mutex_lock(&ddata->lock);
r = panel_dvi_power_on(dssdev);
if (r == 0)
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&ddata->lock);
return r;
}
static void panel_dvi_disable(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
panel_dvi_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
mutex_unlock(&ddata->lock);
}
static int panel_dvi_suspend(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
panel_dvi_power_off(dssdev);
dssdev->state = OMAP_DSS_DISPLAY_SUSPENDED;
mutex_unlock(&ddata->lock);
return 0;
}
static int panel_dvi_resume(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
int r;
mutex_lock(&ddata->lock);
r = panel_dvi_power_on(dssdev);
if (r == 0)
dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
mutex_unlock(&ddata->lock);
return r;
}
static void panel_dvi_set_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
dpi_set_timings(dssdev, timings);
mutex_unlock(&ddata->lock);
}
static void panel_dvi_get_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
mutex_lock(&ddata->lock);
*timings = dssdev->panel.timings;
mutex_unlock(&ddata->lock);
}
static int panel_dvi_check_timings(struct omap_dss_device *dssdev,
struct omap_video_timings *timings)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
int r;
mutex_lock(&ddata->lock);
r = dpi_check_timings(dssdev, timings);
mutex_unlock(&ddata->lock);
return r;
}
static int panel_dvi_ddc_read(struct i2c_adapter *adapter,
unsigned char *buf, u16 count, u8 offset)
{
int r, retries;
for (retries = 3; retries > 0; retries--) {
struct i2c_msg msgs[] = {
{
.addr = DDC_ADDR,
.flags = 0,
.len = 1,
.buf = &offset,
}, {
.addr = DDC_ADDR,
.flags = I2C_M_RD,
.len = count,
.buf = buf,
}
};
r = i2c_transfer(adapter, msgs, 2);
if (r == 2)
return 0;
if (r != -EAGAIN)
break;
}
return r < 0 ? r : -EIO;
}
static int panel_dvi_read_edid(struct omap_dss_device *dssdev,
u8 *edid, int len)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
struct i2c_adapter *adapter;
int r, l, bytes_read;
mutex_lock(&ddata->lock);
if (pdata->i2c_bus_num == 0) {
r = -ENODEV;
goto err;
}
adapter = i2c_get_adapter(pdata->i2c_bus_num);
if (!adapter) {
dev_err(&dssdev->dev, "Failed to get I2C adapter, bus %d\n",
pdata->i2c_bus_num);
r = -EINVAL;
goto err;
}
l = min(EDID_LENGTH, len);
r = panel_dvi_ddc_read(adapter, edid, l, 0);
if (r)
goto err;
bytes_read = l;
/* if there are extensions, read second block */
if (len > EDID_LENGTH && edid[0x7e] > 0) {
l = min(EDID_LENGTH, len - EDID_LENGTH);
r = panel_dvi_ddc_read(adapter, edid + EDID_LENGTH,
l, EDID_LENGTH);
if (r)
goto err;
bytes_read += l;
}
mutex_unlock(&ddata->lock);
return bytes_read;
err:
mutex_unlock(&ddata->lock);
return r;
}
static bool panel_dvi_detect(struct omap_dss_device *dssdev)
{
struct panel_drv_data *ddata = dev_get_drvdata(&dssdev->dev);
struct panel_dvi_platform_data *pdata = get_pdata(dssdev);
struct i2c_adapter *adapter;
unsigned char out;
int r;
mutex_lock(&ddata->lock);
if (pdata->i2c_bus_num == 0)
goto out;
adapter = i2c_get_adapter(pdata->i2c_bus_num);
if (!adapter)
goto out;
r = panel_dvi_ddc_read(adapter, &out, 1, 0);
mutex_unlock(&ddata->lock);
return r == 0;
out:
mutex_unlock(&ddata->lock);
return true;
}
static struct omap_dss_driver panel_dvi_driver = {
.probe = panel_dvi_probe,
.remove = __exit_p(panel_dvi_remove),
.enable = panel_dvi_enable,
.disable = panel_dvi_disable,
.suspend = panel_dvi_suspend,
.resume = panel_dvi_resume,
.set_timings = panel_dvi_set_timings,
.get_timings = panel_dvi_get_timings,
.check_timings = panel_dvi_check_timings,
.read_edid = panel_dvi_read_edid,
.detect = panel_dvi_detect,
.driver = {
.name = "dvi",
.owner = THIS_MODULE,
},
};
static int __init panel_dvi_init(void)
{
return omap_dss_register_driver(&panel_dvi_driver);
}
static void __exit panel_dvi_exit(void)
{
omap_dss_unregister_driver(&panel_dvi_driver);
}
module_init(panel_dvi_init);
module_exit(panel_dvi_exit);
MODULE_LICENSE("GPL");
......@@ -58,30 +58,6 @@ struct panel_config {
/* Panel configurations */
static struct panel_config generic_dpi_panels[] = {
/* Generic Panel */
{
{
.x_res = 640,
.y_res = 480,
.pixel_clock = 23500,
.hfp = 48,
.hsw = 32,
.hbp = 80,
.vfp = 3,
.vsw = 4,
.vbp = 7,
},
.acbi = 0x0,
.acb = 0x0,
.config = OMAP_DSS_LCD_TFT,
.power_on_delay = 0,
.power_off_delay = 0,
.name = "generic",
},
/* Sharp LQ043T1DG01 */
{
{
......@@ -232,6 +208,95 @@ static struct panel_config generic_dpi_panels[] = {
.power_off_delay = 0,
.name = "powertip_ph480272t",
},
/* Innolux AT070TN83 */
{
{
.x_res = 800,
.y_res = 480,
.pixel_clock = 40000,
.hsw = 48,
.hfp = 1,
.hbp = 1,
.vsw = 3,
.vfp = 12,
.vbp = 25,
},
.acbi = 0x0,
.acb = 0x28,
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS,
.power_on_delay = 0,
.power_off_delay = 0,
.name = "innolux_at070tn83",
},
/* NEC NL2432DR22-11B */
{
{
.x_res = 240,
.y_res = 320,
.pixel_clock = 5400,
.hsw = 3,
.hfp = 3,
.hbp = 39,
.vsw = 1,
.vfp = 2,
.vbp = 7,
},
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS,
.name = "nec_nl2432dr22-11b",
},
/* Unknown panel used in OMAP H4 */
{
{
.x_res = 240,
.y_res = 320,
.pixel_clock = 6250,
.hsw = 15,
.hfp = 15,
.hbp = 60,
.vsw = 1,
.vfp = 1,
.vbp = 1,
},
.config = OMAP_DSS_LCD_TFT,
.name = "h4",
},
/* Unknown panel used in Samsung OMAP2 Apollon */
{
{
.x_res = 480,
.y_res = 272,
.pixel_clock = 6250,
.hsw = 41,
.hfp = 2,
.hbp = 2,
.vsw = 10,
.vfp = 2,
.vbp = 2,
},
.config = OMAP_DSS_LCD_TFT | OMAP_DSS_LCD_IVS |
OMAP_DSS_LCD_IHS,
.name = "apollon",
},
};
struct panel_drv_data {
......
This diff is collapsed.
This diff is collapsed.
/*
* Header file required by picodlp panel driver
*
* Copyright (C) 2009-2011 Texas Instruments
* Author: Mythri P K <mythripk@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __OMAP2_DISPLAY_PANEL_PICODLP_H
#define __OMAP2_DISPLAY_PANEL_PICODLP_H
/* Commands used for configuring picodlp panel */
#define MAIN_STATUS 0x03
#define PBC_CONTROL 0x08
#define INPUT_SOURCE 0x0B
#define INPUT_RESOLUTION 0x0C
#define DATA_FORMAT 0x0D
#define IMG_ROTATION 0x0E
#define LONG_FLIP 0x0F
#define SHORT_FLIP 0x10
#define TEST_PAT_SELECT 0x11
#define R_DRIVE_CURRENT 0x12
#define G_DRIVE_CURRENT 0x13
#define B_DRIVE_CURRENT 0x14
#define READ_REG_SELECT 0x15
#define RGB_DRIVER_ENABLE 0x16
#define CPU_IF_MODE 0x18
#define FRAME_RATE 0x19
#define CPU_IF_SYNC_METHOD 0x1A
#define CPU_IF_SOF 0x1B
#define CPU_IF_EOF 0x1C
#define CPU_IF_SLEEP 0x1D
#define SEQUENCE_MODE 0x1E
#define SOFT_RESET 0x1F
#define FRONT_END_RESET 0x21
#define AUTO_PWR_ENABLE 0x22
#define VSYNC_LINE_DELAY 0x23
#define CPU_PI_HORIZ_START 0x24
#define CPU_PI_VERT_START 0x25
#define CPU_PI_HORIZ_WIDTH 0x26
#define CPU_PI_VERT_HEIGHT 0x27
#define PIXEL_MASK_CROP 0x28
#define CROP_FIRST_LINE 0x29
#define CROP_LAST_LINE 0x2A
#define CROP_FIRST_PIXEL 0x2B
#define CROP_LAST_PIXEL 0x2C
#define DMD_PARK_TRIGGER 0x2D
#define MISC_REG 0x30
/* AGC registers */
#define AGC_CTRL 0x50
#define AGC_CLIPPED_PIXS 0x55
#define AGC_BRIGHT_PIXS 0x56
#define AGC_BG_PIXS 0x57
#define AGC_SAFETY_MARGIN 0x17
/* Color Coordinate Adjustment registers */
#define CCA_ENABLE 0x5E
#define CCA_C1A 0x5F
#define CCA_C1B 0x60
#define CCA_C1C 0x61
#define CCA_C2A 0x62
#define CCA_C2B 0x63
#define CCA_C2C 0x64
#define CCA_C3A 0x65
#define CCA_C3B 0x66
#define CCA_C3C 0x67
#define CCA_C7A 0x71
#define CCA_C7B 0x72
#define CCA_C7C 0x73
/**
* DLP Pico Processor 2600 comes with flash
* We can do DMA operations from flash for accessing Look Up Tables
*/
#define DMA_STATUS 0x100
#define FLASH_ADDR_BYTES 0x74
#define FLASH_DUMMY_BYTES 0x75
#define FLASH_WRITE_BYTES 0x76
#define FLASH_READ_BYTES 0x77
#define FLASH_OPCODE 0x78
#define FLASH_START_ADDR 0x79
#define FLASH_DUMMY2 0x7A
#define FLASH_WRITE_DATA 0x7B
#define TEMPORAL_DITH_DISABLE 0x7E
#define SEQ_CONTROL 0x82
#define SEQ_VECTOR 0x83
/* DMD is Digital Micromirror Device */
#define DMD_BLOCK_COUNT 0x84
#define DMD_VCC_CONTROL 0x86
#define DMD_PARK_PULSE_COUNT 0x87
#define DMD_PARK_PULSE_WIDTH 0x88
#define DMD_PARK_DELAY 0x89
#define DMD_SHADOW_ENABLE 0x8E
#define SEQ_STATUS 0x8F
#define FLASH_CLOCK_CONTROL 0x98
#define DMD_PARK 0x2D
#define SDRAM_BIST_ENABLE 0x46
#define DDR_DRIVER_STRENGTH 0x9A
#define SDC_ENABLE 0x9D
#define SDC_BUFF_SWAP_DISABLE 0xA3
#define CURTAIN_CONTROL 0xA6
#define DDR_BUS_SWAP_ENABLE 0xA7
#define DMD_TRC_ENABLE 0xA8
#define DMD_BUS_SWAP_ENABLE 0xA9
#define ACTGEN_ENABLE 0xAE
#define ACTGEN_CONTROL 0xAF
#define ACTGEN_HORIZ_BP 0xB0
#define ACTGEN_VERT_BP 0xB1
/* Look Up Table access */
#define CMT_SPLASH_LUT_START_ADDR 0xFA
#define CMT_SPLASH_LUT_DEST_SELECT 0xFB
#define CMT_SPLASH_LUT_DATA 0xFC
#define SEQ_RESET_LUT_START_ADDR 0xFD
#define SEQ_RESET_LUT_DEST_SELECT 0xFE
#define SEQ_RESET_LUT_DATA 0xFF
/* Input source definitions */
#define PARALLEL_RGB 0
#define INT_TEST_PATTERN 1
#define SPLASH_SCREEN 2
#define CPU_INTF 3
#define BT656 4
/* Standard input resolution definitions */
#define QWVGA_LANDSCAPE 3 /* (427h*240v) */
#define WVGA_864_LANDSCAPE 21 /* (864h*480v) */
#define WVGA_DMD_OPTICAL_TEST 35 /* (608h*684v) */
/* Standard data format definitions */
#define RGB565 0
#define RGB666 1
#define RGB888 2
/* Test Pattern definitions */
#define TPG_CHECKERBOARD 0
#define TPG_BLACK 1
#define TPG_WHITE 2
#define TPG_RED 3
#define TPG_BLUE 4
#define TPG_GREEN 5
#define TPG_VLINES_BLACK 6
#define TPG_HLINES_BLACK 7
#define TPG_VLINES_ALT 8
#define TPG_HLINES_ALT 9
#define TPG_DIAG_LINES 10
#define TPG_GREYRAMP_VERT 11
#define TPG_GREYRAMP_HORIZ 12
#define TPG_ANSI_CHECKERBOARD 13
/* sequence mode definitions */
#define SEQ_FREE_RUN 0
#define SEQ_LOCK 1
/* curtain color definitions */
#define CURTAIN_BLACK 0
#define CURTAIN_RED 1
#define CURTAIN_GREEN 2
#define CURTAIN_BLUE 3
#define CURTAIN_YELLOW 4
#define CURTAIN_MAGENTA 5
#define CURTAIN_CYAN 6
#define CURTAIN_WHITE 7
/* LUT definitions */
#define CMT_LUT_NONE 0
#define CMT_LUT_GREEN 1
#define CMT_LUT_RED 2
#define CMT_LUT_BLUE 3
#define CMT_LUT_ALL 4
#define SPLASH_LUT 5
#define SEQ_LUT_NONE 0
#define SEQ_DRC_LUT_0 1
#define SEQ_DRC_LUT_1 2
#define SEQ_DRC_LUT_2 3
#define SEQ_DRC_LUT_3 4
#define SEQ_SEQ_LUT 5
#define SEQ_DRC_LUT_ALL 6
#define WPC_PROGRAM_LUT 7
#define BITSTREAM_START_ADDR 0x00000000
#define BITSTREAM_SIZE 0x00040000
#define WPC_FW_0_START_ADDR 0x00040000
#define WPC_FW_0_SIZE 0x00000ce8
#define SEQUENCE_0_START_ADDR 0x00044000
#define SEQUENCE_0_SIZE 0x00001000
#define SEQUENCE_1_START_ADDR 0x00045000
#define SEQUENCE_1_SIZE 0x00000d10
#define SEQUENCE_2_START_ADDR 0x00046000
#define SEQUENCE_2_SIZE 0x00000d10
#define SEQUENCE_3_START_ADDR 0x00047000
#define SEQUENCE_3_SIZE 0x00000d10
#define SEQUENCE_4_START_ADDR 0x00048000
#define SEQUENCE_4_SIZE 0x00000d10
#define SEQUENCE_5_START_ADDR 0x00049000
#define SEQUENCE_5_SIZE 0x00000d10
#define SEQUENCE_6_START_ADDR 0x0004a000
#define SEQUENCE_6_SIZE 0x00000d10
#define CMT_LUT_0_START_ADDR 0x0004b200
#define CMT_LUT_0_SIZE 0x00000600
#define CMT_LUT_1_START_ADDR 0x0004b800
#define CMT_LUT_1_SIZE 0x00000600
#define CMT_LUT_2_START_ADDR 0x0004be00
#define CMT_LUT_2_SIZE 0x00000600
#define CMT_LUT_3_START_ADDR 0x0004c400
#define CMT_LUT_3_SIZE 0x00000600
#define CMT_LUT_4_START_ADDR 0x0004ca00
#define CMT_LUT_4_SIZE 0x00000600
#define CMT_LUT_5_START_ADDR 0x0004d000
#define CMT_LUT_5_SIZE 0x00000600
#define CMT_LUT_6_START_ADDR 0x0004d600
#define CMT_LUT_6_SIZE 0x00000600
#define DRC_TABLE_0_START_ADDR 0x0004dc00
#define DRC_TABLE_0_SIZE 0x00000100
#define SPLASH_0_START_ADDR 0x0004dd00
#define SPLASH_0_SIZE 0x00032280
#define SEQUENCE_7_START_ADDR 0x00080000
#define SEQUENCE_7_SIZE 0x00000d10
#define SEQUENCE_8_START_ADDR 0x00081800
#define SEQUENCE_8_SIZE 0x00000d10
#define SEQUENCE_9_START_ADDR 0x00083000
#define SEQUENCE_9_SIZE 0x00000d10
#define CMT_LUT_7_START_ADDR 0x0008e000
#define CMT_LUT_7_SIZE 0x00000600
#define CMT_LUT_8_START_ADDR 0x0008e800
#define CMT_LUT_8_SIZE 0x00000600
#define CMT_LUT_9_START_ADDR 0x0008f000
#define CMT_LUT_9_SIZE 0x00000600
#define SPLASH_1_START_ADDR 0x0009a000
#define SPLASH_1_SIZE 0x00032280
#define SPLASH_2_START_ADDR 0x000cd000
#define SPLASH_2_SIZE 0x00032280
#define SPLASH_3_START_ADDR 0x00100000
#define SPLASH_3_SIZE 0x00032280
#define OPT_SPLASH_0_START_ADDR 0x00134000
#define OPT_SPLASH_0_SIZE 0x000cb100
#endif
......@@ -35,26 +35,12 @@
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
#include <video/mipi_display.h>
/* DSI Virtual channel. Hardcoded for now. */
#define TCH 0
#define DCS_READ_NUM_ERRORS 0x05
#define DCS_READ_POWER_MODE 0x0a
#define DCS_READ_MADCTL 0x0b
#define DCS_READ_PIXEL_FORMAT 0x0c
#define DCS_RDDSDR 0x0f
#define DCS_SLEEP_IN 0x10
#define DCS_SLEEP_OUT 0x11
#define DCS_DISPLAY_OFF 0x28
#define DCS_DISPLAY_ON 0x29
#define DCS_COLUMN_ADDR 0x2a
#define DCS_PAGE_ADDR 0x2b
#define DCS_MEMORY_WRITE 0x2c
#define DCS_TEAR_OFF 0x34
#define DCS_TEAR_ON 0x35
#define DCS_MEM_ACC_CTRL 0x36
#define DCS_PIXEL_FORMAT 0x3a
#define DCS_BRIGHTNESS 0x51
#define DCS_CTRL_DISPLAY 0x53
#define DCS_WRITE_CABC 0x55
......@@ -222,8 +208,6 @@ struct taal_data {
struct delayed_work te_timeout_work;
bool use_dsi_bl;
bool cabc_broken;
unsigned cabc_mode;
......@@ -302,7 +286,7 @@ static int taal_sleep_in(struct taal_data *td)
hw_guard_wait(td);
cmd = DCS_SLEEP_IN;
cmd = MIPI_DCS_ENTER_SLEEP_MODE;
r = dsi_vc_dcs_write_nosync(td->dssdev, td->channel, &cmd, 1);
if (r)
return r;
......@@ -321,7 +305,7 @@ static int taal_sleep_out(struct taal_data *td)
hw_guard_wait(td);
r = taal_dcs_write_0(td, DCS_SLEEP_OUT);
r = taal_dcs_write_0(td, MIPI_DCS_EXIT_SLEEP_MODE);
if (r)
return r;
......@@ -356,7 +340,7 @@ static int taal_set_addr_mode(struct taal_data *td, u8 rotate, bool mirror)
u8 mode;
int b5, b6, b7;
r = taal_dcs_read_1(td, DCS_READ_MADCTL, &mode);
r = taal_dcs_read_1(td, MIPI_DCS_GET_ADDRESS_MODE, &mode);
if (r)
return r;
......@@ -390,7 +374,7 @@ static int taal_set_addr_mode(struct taal_data *td, u8 rotate, bool mirror)
mode &= ~((1<<7) | (1<<6) | (1<<5));
mode |= (b7 << 7) | (b6 << 6) | (b5 << 5);
return taal_dcs_write_1(td, DCS_MEM_ACC_CTRL, mode);
return taal_dcs_write_1(td, MIPI_DCS_SET_ADDRESS_MODE, mode);
}
static int taal_set_update_window(struct taal_data *td,
......@@ -403,7 +387,7 @@ static int taal_set_update_window(struct taal_data *td,
u16 y2 = y + h - 1;
u8 buf[5];
buf[0] = DCS_COLUMN_ADDR;
buf[0] = MIPI_DCS_SET_COLUMN_ADDRESS;
buf[1] = (x1 >> 8) & 0xff;
buf[2] = (x1 >> 0) & 0xff;
buf[3] = (x2 >> 8) & 0xff;
......@@ -413,7 +397,7 @@ static int taal_set_update_window(struct taal_data *td,
if (r)
return r;
buf[0] = DCS_PAGE_ADDR;
buf[0] = MIPI_DCS_SET_PAGE_ADDRESS;
buf[1] = (y1 >> 8) & 0xff;
buf[2] = (y1 >> 0) & 0xff;
buf[3] = (y2 >> 8) & 0xff;
......@@ -555,7 +539,6 @@ static int taal_bl_update_status(struct backlight_device *dev)
{
struct omap_dss_device *dssdev = dev_get_drvdata(&dev->dev);
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
int r;
int level;
......@@ -569,23 +552,16 @@ static int taal_bl_update_status(struct backlight_device *dev)
mutex_lock(&td->lock);
if (td->use_dsi_bl) {
if (td->enabled) {
dsi_bus_lock(dssdev);
if (td->enabled) {
dsi_bus_lock(dssdev);
r = taal_wake_up(dssdev);
if (!r)
r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
r = taal_wake_up(dssdev);
if (!r)
r = taal_dcs_write_1(td, DCS_BRIGHTNESS, level);
dsi_bus_unlock(dssdev);
} else {
r = 0;
}
dsi_bus_unlock(dssdev);
} else {
if (!panel_data->set_backlight)
r = -EINVAL;
else
r = panel_data->set_backlight(dssdev, level);
r = 0;
}
mutex_unlock(&td->lock);
......@@ -964,7 +940,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
{
struct backlight_properties props;
struct taal_data *td;
struct backlight_device *bldev;
struct backlight_device *bldev = NULL;
struct nokia_dsi_panel_data *panel_data = get_panel_data(dssdev);
struct panel_config *panel_config = NULL;
int r, i;
......@@ -990,7 +966,7 @@ static int taal_probe(struct omap_dss_device *dssdev)
dssdev->panel.config = OMAP_DSS_LCD_TFT;
dssdev->panel.timings = panel_config->timings;
dssdev->ctrl.pixel_size = 24;
dssdev->panel.dsi_pix_fmt = OMAP_DSS_DSI_FMT_RGB888;
td = kzalloc(sizeof(*td), GFP_KERNEL);
if (!td) {
......@@ -1025,35 +1001,26 @@ static int taal_probe(struct omap_dss_device *dssdev)
taal_hw_reset(dssdev);
/* if no platform set_backlight() defined, presume DSI backlight
* control */
memset(&props, 0, sizeof(struct backlight_properties));
if (!panel_data->set_backlight)
td->use_dsi_bl = true;
if (td->use_dsi_bl)
if (panel_data->use_dsi_backlight) {
memset(&props, 0, sizeof(struct backlight_properties));
props.max_brightness = 255;
else
props.max_brightness = 127;
props.type = BACKLIGHT_RAW;
bldev = backlight_device_register(dev_name(&dssdev->dev), &dssdev->dev,
dssdev, &taal_bl_ops, &props);
if (IS_ERR(bldev)) {
r = PTR_ERR(bldev);
goto err_bl;
}
td->bldev = bldev;
props.type = BACKLIGHT_RAW;
bldev = backlight_device_register(dev_name(&dssdev->dev),
&dssdev->dev, dssdev, &taal_bl_ops, &props);
if (IS_ERR(bldev)) {
r = PTR_ERR(bldev);
goto err_bl;
}
td->bldev = bldev;
bldev->props.fb_blank = FB_BLANK_UNBLANK;
bldev->props.power = FB_BLANK_UNBLANK;
if (td->use_dsi_bl)
bldev->props.fb_blank = FB_BLANK_UNBLANK;
bldev->props.power = FB_BLANK_UNBLANK;
bldev->props.brightness = 255;
else
bldev->props.brightness = 127;
taal_bl_update_status(bldev);
taal_bl_update_status(bldev);
}
if (panel_data->use_ext_te) {
int gpio = panel_data->ext_te_gpio;
......@@ -1111,7 +1078,8 @@ static int taal_probe(struct omap_dss_device *dssdev)
if (panel_data->use_ext_te)
gpio_free(panel_data->ext_te_gpio);
err_gpio:
backlight_device_unregister(bldev);
if (bldev != NULL)
backlight_device_unregister(bldev);
err_bl:
destroy_workqueue(td->workqueue);
err_wq:
......@@ -1140,9 +1108,11 @@ static void __exit taal_remove(struct omap_dss_device *dssdev)
}
bldev = td->bldev;
bldev->props.power = FB_BLANK_POWERDOWN;
taal_bl_update_status(bldev);
backlight_device_unregister(bldev);
if (bldev != NULL) {
bldev->props.power = FB_BLANK_POWERDOWN;
taal_bl_update_status(bldev);
backlight_device_unregister(bldev);
}
taal_cancel_ulps_work(dssdev);
taal_cancel_esd_work(dssdev);
......@@ -1195,7 +1165,8 @@ static int taal_power_on(struct omap_dss_device *dssdev)
if (r)
goto err;
r = taal_dcs_write_1(td, DCS_PIXEL_FORMAT, 0x7); /* 24bit/pixel */
r = taal_dcs_write_1(td, MIPI_DCS_SET_PIXEL_FORMAT,
MIPI_DCS_PIXEL_FMT_24BIT);
if (r)
goto err;
......@@ -1209,7 +1180,7 @@ static int taal_power_on(struct omap_dss_device *dssdev)
goto err;
}
r = taal_dcs_write_0(td, DCS_DISPLAY_ON);
r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_ON);
if (r)
goto err;
......@@ -1246,7 +1217,7 @@ static void taal_power_off(struct omap_dss_device *dssdev)
struct taal_data *td = dev_get_drvdata(&dssdev->dev);
int r;
r = taal_dcs_write_0(td, DCS_DISPLAY_OFF);
r = taal_dcs_write_0(td, MIPI_DCS_SET_DISPLAY_OFF);
if (!r)
r = taal_sleep_in(td);
......@@ -1529,9 +1500,9 @@ static int _taal_enable_te(struct omap_dss_device *dssdev, bool enable)
int r;
if (enable)
r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
else
r = taal_dcs_write_0(td, DCS_TEAR_OFF);
r = taal_dcs_write_0(td, MIPI_DCS_SET_TEAR_OFF);
if (!panel_data->use_ext_te)
omapdss_dsi_enable_te(dssdev, enable);
......@@ -1851,7 +1822,7 @@ static void taal_esd_work(struct work_struct *work)
goto err;
}
r = taal_dcs_read_1(td, DCS_RDDSDR, &state1);
r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state1);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
......@@ -1864,7 +1835,7 @@ static void taal_esd_work(struct work_struct *work)
goto err;
}
r = taal_dcs_read_1(td, DCS_RDDSDR, &state2);
r = taal_dcs_read_1(td, MIPI_DCS_GET_DIAGNOSTIC_RESULT, &state2);
if (r) {
dev_err(&dssdev->dev, "failed to read Taal status\n");
goto err;
......@@ -1880,7 +1851,7 @@ static void taal_esd_work(struct work_struct *work)
/* Self-diagnostics result is also shown on TE GPIO line. We need
* to re-enable TE after self diagnostics */
if (td->te_enabled && panel_data->use_ext_te) {
r = taal_dcs_write_1(td, DCS_TEAR_ON, 0);
r = taal_dcs_write_1(td, MIPI_DCS_SET_TEAR_ON, 0);
if (r)
goto err;
}
......
menuconfig OMAP2_DSS
tristate "OMAP2+ Display Subsystem support (EXPERIMENTAL)"
tristate "OMAP2+ Display Subsystem support"
depends on ARCH_OMAP2PLUS
help
OMAP2+ Display Subsystem support.
......
......@@ -6,4 +6,4 @@ omapdss-$(CONFIG_OMAP2_DSS_VENC) += venc.o
omapdss-$(CONFIG_OMAP2_DSS_SDI) += sdi.o
omapdss-$(CONFIG_OMAP2_DSS_DSI) += dsi.o
omapdss-$(CONFIG_OMAP4_DSS_HDMI) += hdmi.o \
hdmi_omap4_panel.o
hdmi_panel.o ti_hdmi_4xxx_ip.o
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
menuconfig FB_OMAP2
tristate "OMAP2+ frame buffer support (EXPERIMENTAL)"
tristate "OMAP2+ frame buffer support"
depends on FB && OMAP2_DSS
select OMAP2_VRAM
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment