Commit 036bb15e authored by Sascha Hauer's avatar Sascha Hauer Committed by Robert Schwebel

IMX UART: do not assume 16MHz reference frequency

We assumed a 16MHz reference frequency for the UART. While this
is true for i.MX1 most of the time it is not true for MX27/MX31.
Also, add handling for the ONEMS register which is present on
newer versions of the chip and pass a sane minimum baudrate to
uart_get_baud_rate().
Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent 63dd1084
......@@ -589,6 +589,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
unsigned long flags;
unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
unsigned int div, num, denom, ufcr;
/*
* If we don't support modem control lines, don't allow
......@@ -634,7 +635,7 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
baud = uart_get_baud_rate(port, termios, old, 50, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
spin_lock_irqsave(&sport->port.lock, flags);
......@@ -684,14 +685,41 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
sport->port.membase + UCR2);
old_txrxen &= (UCR2_TXEN | UCR2_RXEN);
/* set the baud rate. We assume uartclk = 16 MHz
*
* baud * 16 UBIR - 1
* --------- = --------
* uartclk UBMR - 1
*/
writel((baud / 100) - 1, sport->port.membase + UBIR);
writel(10000 - 1, sport->port.membase + UBMR);
div = sport->port.uartclk / (baud * 16);
if (div > 7)
div = 7;
if (!div)
div = 1;
num = baud;
denom = port->uartclk / div / 16;
/* shift num and denom right until they fit into 16 bits */
while (num > 0x10000 || denom > 0x10000) {
num >>= 1;
denom >>= 1;
}
if (num > 0)
num -= 1;
if (denom > 0)
denom -= 1;
writel(num, sport->port.membase + UBIR);
writel(denom, sport->port.membase + UBMR);
if (div == 7)
div = 6; /* 6 in RFDIV means divide by 7 */
else
div = 6 - div;
ufcr = readl(sport->port.membase + UFCR);
ufcr = (ufcr & (~UFCR_RFDIV)) |
(div << 7);
writel(ufcr, sport->port.membase + UFCR);
#ifdef ONEMS
writel(sport->port.uartclk / div / 1000, sport->port.membase + ONEMS);
#endif
writel(old_ucr1, sport->port.membase + UCR1);
......@@ -812,7 +840,6 @@ static struct imx_port imx_ports[] = {
.membase = (void *)IMX_UART1_BASE,
.mapbase = 0x00206000,
.irq = UART1_MINT_RX,
.uartclk = 16000000,
.fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
......@@ -828,7 +855,6 @@ static struct imx_port imx_ports[] = {
.membase = (void *)IMX_UART2_BASE,
.mapbase = 0x00207000,
.irq = UART2_MINT_RX,
.uartclk = 16000000,
.fifosize = 32,
.flags = UPF_BOOT_AUTOCONF,
.ops = &imx_pops,
......@@ -858,6 +884,8 @@ static void __init imx_init_ports(void)
init_timer(&imx_ports[i].timer);
imx_ports[i].timer.function = imx_timeout;
imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
imx_ports[i].port.uartclk = imx_get_perclk1();
}
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment