Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (47 commits)
  [MAINTAINERS] The ham radio code now has website at http://www.linux-ax25.org.
  [MIPS] Use __ffs() instead of ffs() for waybit calculation.
  [MIPS] Fix Makefile bugs for MIPS32/MIPS64 R1 and R2.
  [MIPS] Handle IDE PIO cache aliases on SMP.
  [MIPS] Make mips_srs_init static.
  [MIPS] MIPS boards: Set HZ to 100.
  [MIPS] kgdb: Let gcc compute the array size itself.
  [MIPS] FPU affinity for MT ASE.
  [MIPS] MT: Improved multithreading support.
  [MIPS] kpsd and other AP/SP improvements.
  [MIPS] R2: Instruction hazard barrier.
  [MIPS] Fix genrtc compilation.
  [MIPS] R2: Implement shadow register allocation without spinlock.
  [MIPS] Fix VR41xx build errors.
  [MIPS] Fix tx49_blast_icache32_page_indexed.
  [MIPS] Enable SCHED_NO_NO_OMIT_FRAME_POINTER for MIPS.
  [MIPS] Use "R" constraint for cache_op.
  [MIPS] Rewrite all the assembler interrupt handlers to C.
  [MIPS] Fix the crime against humanity that mipsIRQ.S is.
  [MIPS] Fixup damage done by 22a9835c.
  ...

MAINTAINERS

@@ -411,6 +411,7 @@ AX.25 NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
@@ -1869,6 +1870,7 @@ NETROM NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 NETWORK BLOCK DEVICE
@@ -2260,6 +2262,7 @@ ROSE NETWORK LAYER
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
 L:	linux-hams@vger.kernel.org
+W:	http://www.linux-ax25.org/
 S:	Maintained
 
 RISCOM8 DRIVER

arch/mips/Kconfig

@@ -816,6 +816,10 @@ config GENERIC_CALIBRATE_DELAY
 	bool
 	default y
 
+config SCHED_NO_NO_OMIT_FRAME_POINTER
+	bool
+	default y
+
 #
 # Select some configuration options automatically based on user selections.
 #
@@ -1443,6 +1447,10 @@ choice
 	prompt "MIPS MT options"
 	depends on MIPS_MT
 
+config MIPS_MT_SMTC
+	bool "SMTC: Use all TCs on all VPEs for SMP"
+	select SMP
+
 config MIPS_MT_SMP
 	bool "Use 1 TC on each available VPE for SMP"
 	select SMP
@@ -1456,6 +1464,11 @@ config MIPS_VPE_LOADER
 
 endchoice
 
+config MIPS_MT_FPAFF
+	bool "Dynamic FPU affinity for FP-intensive threads"
+	depends on MIPS_MT
+	default y
+
 config MIPS_VPE_LOADER_TOM
 	bool "Load VPE program into memory hidden from linux"
 	depends on MIPS_VPE_LOADER
@@ -1472,6 +1485,16 @@ config MIPS_VPE_APSP_API
 	depends on MIPS_VPE_LOADER
 	help
 
+config MIPS_APSP_KSPD
+	bool "Enable KSPD"
+	depends on MIPS_VPE_APSP_API
+	default y
+	help
+	  KSPD is a kernel daemon that accepts syscall requests from the SP
+	  side, actions them and returns the results. It also handles the
+	  "exit" syscall notifying other kernel modules the SP program is
+	  exiting.  You probably want to say yes here.
+
 config SB1_PASS_1_WORKAROUNDS
 	bool
 	depends on CPU_SB1_PASS_1
@@ -1599,7 +1622,7 @@ source "mm/Kconfig"
 
 config SMP
 	bool "Multi-Processing support"
-	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP
+	depends on CPU_RM9000 || ((SIBYTE_BCM1x80 || SIBYTE_BCM1x55 || SIBYTE_SB1250 || QEMU) && !SIBYTE_STANDALONE) || SGI_IP27 || MIPS_MT_SMP || MIPS_MT_SMTC
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/mips/Makefile

@@ -105,18 +105,18 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32r2 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips2 -mtune=r4600) \
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64 -Wa,--trap
-cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips2 -mtune=r4600 ) \
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
 			-Wa,-mips64r2 -Wa,--trap
 cflags-$(CONFIG_CPU_R5000)	+= -march=r5000 -Wa,--trap
-cflags-$(CONFIG_CPU_R5432)	+= $(call cc-options,-march=r5400,-march=r5000) \
+cflags-$(CONFIG_CPU_R5432)	+= $(call cc-option,-march=r5400,-march=r5000) \
 			-Wa,--trap
-cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-options,-march=rm5200,-march=r5000) \
+cflags-$(CONFIG_CPU_NEVADA)	+= $(call cc-option,-march=rm5200,-march=r5000) \
 			-Wa,--trap
 cflags-$(CONFIG_CPU_RM7000)	+= $(call cc-option,-march=rm7000,-march=r5000) \
 			-Wa,--trap

arch/mips/au1000/common/Makefile

@@ -6,7 +6,7 @@
 # Makefile for the Alchemy Au1000 CPU, generic files.
 #
 
-obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
+obj-y += prom.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
 	sleeper.o cputable.o dma.o dbdma.o gpio.o
 

arch/mips/au1000/common/int-handler.S

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: ppopov@mvista.com
- *
- * Interrupt dispatcher for Au1000 boards.
- *
- * This program is free software; you can redistribute	it and/or modify it
- * under  the terms of	the GNU General	 Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set	macro
-	.set	noat
-	.align	5
-
-NESTED(au1000_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-	mfc0	t0,CP0_CAUSE		# get pending interrupts
-	mfc0	t1,CP0_STATUS		# get enabled interrupts
-	and	t0,t1			# isolate allowed ones
-
-	andi	t0,0xff00		# isolate pending bits
-	beqz	t0, 3f			# spurious interrupt
-
-	andi	a0, t0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	move	a0, sp
-	jal	mips_timer_interrupt
-	j	ret_from_irq
-
-1:
-	andi	a0, t0, CAUSEF_IP2	# Interrupt Controller 0, Request 0
-	beq	a0, zero, 2f
-	move	a0,sp
-	jal	intc0_req0_irqdispatch
-	j	ret_from_irq
-2:
-	andi	a0, t0, CAUSEF_IP3	# Interrupt Controller 0, Request 1
-	beq	a0, zero, 3f
-	move	a0,sp
-	jal	intc0_req1_irqdispatch
-	j	ret_from_irq
-3:
-	andi	a0, t0, CAUSEF_IP4	# Interrupt Controller 1, Request 0
-	beq	a0, zero, 4f
-	move	a0,sp
-	jal	intc1_req0_irqdispatch
-	j	ret_from_irq
-4:
-	andi	a0, t0, CAUSEF_IP5	# Interrupt Controller 1, Request 1
-	beq	a0, zero, 5f
-	move	a0, sp
-	jal	intc1_req1_irqdispatch
-	j	ret_from_irq
-
-5:
-	move	a0, sp
-	j	spurious_interrupt
-END(au1000_IRQ)

arch/mips/au1000/common/irq.c

@@ -66,7 +66,6 @@
 #define EXT_INTC1_REQ1 5 /* IP 5 */
 #define MIPS_TIMER_IP  7 /* IP 7 */
 
-extern asmlinkage void au1000_IRQ(void);
 extern void set_debug_traps(void);
 extern irq_cpustat_t irq_stat [NR_CPUS];
 
@@ -446,7 +445,6 @@ void __init arch_init_irq(void)
 	extern int au1xxx_ic0_nr_irqs;
 
 	cp0_status = read_c0_status();
-	set_except_vector(0, au1000_IRQ);
 
 	/* Initialize interrupt controllers to a safe state.
 	*/
@@ -661,3 +659,21 @@ restore_au1xxx_intctl(void)
 	au_writel(sleep_intctl_mask[0], IC0_MASKSET); au_sync();
 }
 #endif /* CONFIG_PM */
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		mips_timer_interrupt(regs);
+	else if (pending & CAUSEF_IP2)
+		intc0_req0_irqdispatch(regs);
+	else if (pending & CAUSEF_IP3)
+		intc0_req1_irqdispatch(regs);
+	else if (pending & CAUSEF_IP4)
+		intc1_req0_irqdispatch(regs);
+	else if (pending  & CAUSEF_IP5)
+		intc1_req1_irqdispatch(regs);
+	else
+		spurious_interrupt(regs);
+}

arch/mips/cobalt/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y	 := irq.o int-handler.o reset.o setup.o
+obj-y	 := irq.o reset.o setup.o
 
 obj-$(CONFIG_EARLY_PRINTK)	+= console.o
 

arch/mips/cobalt/irq.c

@@ -20,8 +20,6 @@
 
 #include <asm/mach-cobalt/cobalt.h>
 
-extern void cobalt_handle_int(void);
-
 /*
  * We have two types of interrupts that we handle, ones that come in through
  * the CPU interrupt lines, and ones that come in on the via chip. The CPU
@@ -79,7 +77,7 @@ static inline void via_pic_irq(struct pt_regs *regs)
 		do_IRQ(irq, regs);
 }
 
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	unsigned pending;
 
@@ -122,8 +120,6 @@ void __init arch_init_irq(void)
 	 */
 	GALILEO_OUTL(0, GT_INTRMASK_OFS);
 
-	set_except_vector(0, cobalt_handle_int);
-
 	init_i8259_irqs();				/*  0 ... 15 */
 	mips_cpu_irq_init(COBALT_CPU_IRQ);		/* 16 ... 23 */
 

arch/mips/ddb5xxx/ddb5074/Makefile

@@ -3,6 +3,6 @@
 # under Linux.
 #
 
-obj-y			+= setup.o irq.o int-handler.o nile4_pic.o
+obj-y			+= setup.o irq.o nile4_pic.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/ddb5xxx/ddb5074/int-handler.S

-/*
- *  arch/mips/ddb5074/int-handler.S -- NEC DDB Vrc-5074 interrupt handler
- *
- *  Based on arch/mips/sgi/kernel/indyIRQ.S
- *
- *  Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
- *
- *  Copyright (C) 2000 Geert Uytterhoeven <geert@sonycom.com>
- *                     Sony Software Development Center Europe (SDCE), Brussels
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/* A lot of complication here is taken away because:
- *
- * 1) We handle one interrupt and return, sitting in a loop and moving across
- *    all the pending IRQ bits in the cause register is _NOT_ the answer, the
- *    common case is one pending IRQ so optimize in that direction.
- *
- * 2) We need not check against bits in the status register IRQ mask, that
- *    would make this routine slow as hell.
- *
- * 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
- *    between like BSD spl() brain-damage.
- *
- * Furthermore, the IRQs on the INDY look basically (barring software IRQs
- * which we don't use at all) like:
- *
- *	MIPS IRQ	Source
- *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Local IRQ level zero
- *             3        Local IRQ level one
- *             4        8254 Timer zero
- *             5        8254 Timer one
- *             6        Bus Error
- *             7        R4k timer (what we use)
- *
- * We handle the IRQ according to _our_ priority which is:
- *
- * Highest ----     R4k Timer
- *                  Local IRQ zero
- *                  Local IRQ one
- *                  Bus Error
- *                  8254 Timer zero
- * Lowest  ----     8254 Timer one
- *
- * then we just return, if multiple IRQs are pending then we will just take
- * another exception, big deal.
- */
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(ddbIRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	mfc0	s0, CP0_CAUSE		# get irq mask
-
-#if 1
-	mfc0	t2,CP0_STATUS		# get enabled interrupts
-	and	s0,t2			# isolate allowed ones
-#endif
-	/* First we check for r4k counter/timer IRQ. */
-	andi	a0, s0, CAUSEF_IP2	# delay slot, check local level zero
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP3	# delay slot, check local level one
-
-	/* Wheee, local level zero interrupt. */
-	jal	ddb_local0_irqdispatch
-	 move	a0, sp			# delay slot
-
-	j	ret_from_irq
-	 nop				# delay slot
-
-1:
-	beq	a0, zero, 1f
-	 andi	a0, s0, CAUSEF_IP6	# delay slot, check bus error
-
-	/* Wheee, local level one interrupt. */
-	move	a0, sp
-	jal	ddb_local1_irqdispatch
-	 nop
-
-	j	ret_from_irq
-	 nop
-
-1:
-	beq	a0, zero, 1f
-	 nop
-
-	/* Wheee, an asynchronous bus error... */
-	move	a0, sp
-	jal	ddb_buserror_irq
-	 nop
-
-	j	ret_from_irq
-	 nop
-
-1:
-	/* Here by mistake?  This is possible, what can happen
-	 * is that by the time we take the exception the IRQ
-	 * pin goes low, so just leave if this is the case.
-	 */
-	andi	a0, s0, (CAUSEF_IP4 | CAUSEF_IP5)
-	beq	a0, zero, 1f
-
-	/* Must be one of the 8254 timers... */
-	move	a0, sp
-	jal	ddb_8254timer_irq
-	 nop
-1:
-	j	ret_from_irq
-	 nop
-	END(ddbIRQ)

arch/mips/ddb5xxx/ddb5074/irq.c

@@ -21,8 +21,6 @@
 #include <asm/ddb5xxx/ddb5074.h>
 
 
-extern asmlinkage void ddbIRQ(void);
-
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 
 #define M1543_PNP_CONFIG	0x03f0	/* PnP Config Port */
@@ -90,7 +88,7 @@ static void m1543_irq_setup(void)
 
 }
 
-void ddb_local0_irqdispatch(struct pt_regs *regs)
+static void ddb_local0_irqdispatch(struct pt_regs *regs)
 {
 	u32 mask;
 	int nile4_irq;
@@ -118,29 +116,41 @@ void ddb_local0_irqdispatch(struct pt_regs *regs)
 		}
 }
 
-void ddb_local1_irqdispatch(void)
+static void ddb_local1_irqdispatch(void)
 {
 	printk("ddb_local1_irqdispatch called\n");
 }
 
-void ddb_buserror_irq(void)
+static void ddb_buserror_irq(void)
 {
 	printk("ddb_buserror_irq called\n");
 }
 
-void ddb_8254timer_irq(void)
+static void ddb_8254timer_irq(void)
 {
 	printk("ddb_8254timer_irq called\n");
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & CAUSEF_IP2)
+		ddb_local0_irqdispatch(regs);
+	else if (pending & CAUSEF_IP3)
+		ddb_local1_irqdispatch();
+	else if (pending & CAUSEF_IP6)
+		ddb_buserror_irq();
+	else if (pending & (CAUSEF_IP4 | CAUSEF_IP5))
+		ddb_8254timer_irq();
+}
+
 void __init arch_init_irq(void)
 {
 	/* setup cascade interrupts */
 	setup_irq(NILE4_IRQ_BASE  + NILE4_INT_INTE, &irq_cascade);
 	setup_irq(CPU_IRQ_BASE + CPU_NILE4_CASCADE, &irq_cascade);
 
-	set_except_vector(0, ddbIRQ);
-
 	nile4_irq_setup(NILE4_IRQ_BASE);
 	m1543_irq_setup();
 	init_i8259_irqs();

arch/mips/ddb5xxx/ddb5476/Makefile

@@ -3,7 +3,7 @@
 # under Linux.
 #
 
-obj-y			+= setup.o irq.o int-handler.o nile4_pic.o vrc5476_irq.o
+obj-y			+= setup.o irq.o nile4_pic.o vrc5476_irq.o
 obj-$(CONFIG_KGDB)	+= dbg_io.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/ddb5xxx/ddb5476/int-handler.S

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ddb5476
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-#include <asm/ddb5xxx/ddb5476.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-	.align	5
-	NESTED(ddb5476_handle_int, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	.set	noreorder
-	mfc0	t0, CP0_CAUSE
-	mfc0	t2, CP0_STATUS
-
-	and	t0, t2
-
-        andi    t1, t0, STATUSF_IP7     /* cpu timer */
-        bnez    t1, ll_cpu_ip7
-        andi    t1, t0, STATUSF_IP2	/* vrc5476 & i8259 */
-        bnez    t1, ll_cpu_ip2
-        andi    t1, t0, STATUSF_IP3
-        bnez    t1, ll_cpu_ip3
-        andi    t1, t0, STATUSF_IP4
-        bnez    t1, ll_cpu_ip4
-        andi    t1, t0, STATUSF_IP5
-        bnez    t1, ll_cpu_ip5
-        andi    t1, t0, STATUSF_IP6
-        bnez    t1, ll_cpu_ip6
-        andi    t1, t0, STATUSF_IP0     /* software int 0 */
-        bnez    t1, ll_cpu_ip0
-        andi    t1, t0, STATUSF_IP1     /* software int 1 */
-        bnez    t1, ll_cpu_ip1
-        nop
-
-	.set	reorder
-
-	/* wrong alarm or masked ... */
-	// j	spurious_interrupt
-	move 	a0, sp
-	jal	vrc5476_irq_dispatch
-	j	ret_from_irq
-	nop
-
-	.align	5
-
-ll_cpu_ip0:
-	li	a0, CPU_IRQ_BASE + 0
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip1:
-	li	a0, CPU_IRQ_BASE + 1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip2:		/* jump to second-level dispatching */
-	move	a0, sp
-	jal	vrc5476_irq_dispatch
-	j	ret_from_irq
-
-ll_cpu_ip3:
-	li	a0, CPU_IRQ_BASE + 3
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip4:
-	li	a0, CPU_IRQ_BASE + 4
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip5:
-	li	a0, CPU_IRQ_BASE + 5
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip6:
-	li	a0, CPU_IRQ_BASE + 6
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip7:
-	li	a0, CPU_IRQ_BASE + 7
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-	END(ddb5476_handle_int)

arch/mips/ddb5xxx/ddb5476/irq.c

@@ -110,11 +110,36 @@ static void nile4_irq_setup(void)
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 static struct irqaction irq_error = { no_action, 0, CPU_MASK_NONE, "error", NULL, NULL };
 
-extern asmlinkage void ddb5476_handle_int(void);
 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 extern void mips_cpu_irq_init(u32 irq_base);
 extern void vrc5476_irq_init(u32 irq_base);
 
+extern void vrc5476_irq_dispatch(struct pt_regs *regs);
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7, regs);
+	else if (pending & STATUSF_IP2)
+		vrc5476_irq_dispatch(regs);
+	else if (pending & STATUSF_IP3)
+		do_IRQ(CPU_IRQ_BASE + 3, regs);
+	else if (pending & STATUSF_IP4)
+		do_IRQ(CPU_IRQ_BASE + 4, regs);
+	else if (pending & STATUSF_IP5)
+		do_IRQ(CPU_IRQ_BASE + 5, regs);
+	else if (pending & STATUSF_IP6)
+		do_IRQ(CPU_IRQ_BASE + 6, regs);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1, regs);
+
+	vrc5476_irq_dispatch(regs);
+}
+
 void __init arch_init_irq(void)
 {
 	/* hardware initialization */
@@ -137,7 +162,4 @@ void __init arch_init_irq(void)
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_LBRT, &irq_error);
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCIS, &irq_error);
 	setup_irq(VRC5476_IRQ_BASE + VRC5476_IRQ_PCI, &irq_error);
-
-	/* setup the grandpa intr vector */
-	set_except_vector(0, ddb5476_handle_int);
 }

arch/mips/ddb5xxx/ddb5476/vrc5476_irq.c

@@ -77,11 +77,9 @@ vrc5476_irq_init(u32 base)
 }
 
 
-asmlinkage void
+void
 vrc5476_irq_dispatch(struct pt_regs *regs)
 {
-	extern void spurious_interrupt(void);
-
 	u32 mask;
 	int nile4_irq;
 
@@ -107,5 +105,5 @@ vrc5476_irq_dispatch(struct pt_regs *regs)
 			return;
 		}
 	}
-	spurious_interrupt();
+	spurious_interrupt(regs);
 }

arch/mips/ddb5xxx/ddb5477/Makefile

@@ -2,7 +2,7 @@
 # Makefile for NEC DDB-Vrc5477 board
 #
 
-obj-y	 		+= int-handler.o irq.o irq_5477.o setup.o lcd44780.o
+obj-y	 		+= irq.o irq_5477.o setup.o lcd44780.o
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o

arch/mips/ddb5xxx/ddb5477/int-handler.S

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ddb5477
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/ddb5xxx/ddb5477.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-	.align	5
-	NESTED(ddb5477_handle_int, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	.set	noreorder
-	mfc0	t0, CP0_CAUSE
-	mfc0	t2, CP0_STATUS
-
-	and	t0, t2
-
-	andi	t1, t0, STATUSF_IP7	/* cpu timer */
-	bnez	t1, ll_cputimer_irq
-	andi	t1, t0, (STATUSF_IP2 | STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP5 | STATUSF_IP6 )
-	bnez	t1, ll_vrc5477_irq
-	andi	t1, t0, STATUSF_IP0	/* software int 0 */
-	bnez	t1, ll_cpu_ip0
-	andi	t1, t0, STATUSF_IP1	/* software int 1 */
-	bnez	t1, ll_cpu_ip1
-	nop
-	.set	reorder
-
-	/* wrong alarm or masked ... */
-	j	spurious_interrupt
-	nop
-	END(ddb5477_handle_int)
-
-	.align	5
-
-ll_vrc5477_irq:
-	move	a0, sp
-	jal	vrc5477_irq_dispatch
-	j	ret_from_irq
-
-ll_cputimer_irq:
-	li	a0, CPU_IRQ_BASE + 7
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-
-ll_cpu_ip0:
-	li	a0, CPU_IRQ_BASE + 0
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq
-
-ll_cpu_ip1:
-	li	a0, CPU_IRQ_BASE + 1
-	move	a1, sp
-	jal	do_IRQ
-	j	ret_from_irq

arch/mips/ddb5xxx/ddb5477/irq.c

@@ -75,7 +75,6 @@ set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger)
 
 extern void vrc5477_irq_init(u32 base);
 extern void mips_cpu_irq_init(u32 base);
-extern asmlinkage void ddb5477_handle_int(void);
 extern int setup_irq(unsigned int irq, struct irqaction *irqaction);
 static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
 
@@ -135,9 +134,6 @@ void __init arch_init_irq(void)
 	/* setup cascade interrupts */
 	setup_irq(VRC5477_IRQ_BASE + VRC5477_I8259_CASCADE, &irq_cascade);
 	setup_irq(CPU_IRQ_BASE + CPU_VRC5477_CASCADE, &irq_cascade);
-
-	/* hook up the first-level interrupt handler */
-	set_except_vector(0, ddb5477_handle_int);
 }
 
 u8 i8259_interrupt_ack(void)
@@ -159,7 +155,7 @@ u8 i8259_interrupt_ack(void)
  * the first level int-handler will jump here if it is a vrc5477 irq
  */
 #define	NUM_5477_IRQS	32
-asmlinkage void
+static void
 vrc5477_irq_dispatch(struct pt_regs *regs)
 {
 	u32 intStatus;
@@ -197,3 +193,21 @@ vrc5477_irq_dispatch(struct pt_regs *regs)
 		}
 	}
 }
+
+#define VR5477INTS (STATUSF_IP2|STATUSF_IP3|STATUSF_IP4|STATUSF_IP5|STATUSF_IP6)
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status();
+
+	if (pending & STATUSF_IP7)
+		do_IRQ(CPU_IRQ_BASE + 7, regs);
+	else if (pending & VR5477INTS)
+		vrc5477_irq_dispatch(regs);
+	else if (pending & STATUSF_IP0)
+		do_IRQ(CPU_IRQ_BASE, regs);
+	else if (pending & STATUSF_IP1)
+		do_IRQ(CPU_IRQ_BASE + 1, regs);
+	else
+		spurious_interrupt(regs);
+}

arch/mips/dec/boot/decstation.c

 /*
  * arch/mips/dec/decstation.c
  */
+#include <asm/sections.h>
 
 #define RELOC
 #define INITRD
@@ -24,7 +25,7 @@
 #define INITRD_START (*(unsigned long *) (PARAM+0x218))
 #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c))
 
-extern int _ftext, _end;		/* begin and end of kernel image */
+extern int _ftext;			/* begin and end of kernel image */
 extern void kernel_entry(int, char **, unsigned long, int *);
 
 void * memcpy(void * dest, const void *src, unsigned int count)

arch/mips/dec/int-handler.S

@@ -36,7 +36,7 @@
 		.text
 		.set	noreorder
 /*
- * decstation_handle_int: Interrupt handler for DECstations
+ * plat_irq_dispatch: Interrupt handler for DECstations
  *
  * We follow the model in the Indy interrupt code by David Miller, where he
  * says: a lot of complication here is taken away because:
@@ -125,11 +125,7 @@
  * just take another exception, big deal.
  */
 		.align	5
-		NESTED(decstation_handle_int, PT_SIZE, ra)
-		.set	noat
-		SAVE_ALL
-		CLI				# TEST: interrupts should be off
-		.set	at
+		NESTED(plat_irq_dispatch, PT_SIZE, ra)
 		.set	noreorder
 
 		/*
@@ -282,9 +278,11 @@ fpu:
 #endif
 
 spurious:
-		j	spurious_interrupt
+		jal	spurious_interrupt
 		 nop
-		END(decstation_handle_int)
+		j	ret_from_irq
+		 nop
+		END(plat_irq_dispatch)
 
 /*
  * Generic unimplemented interrupt routines -- cpu_mask_nr_tbl

arch/mips/dec/setup.c

@@ -48,8 +48,6 @@ extern void dec_machine_halt(void);
 extern void dec_machine_power_off(void);
 extern irqreturn_t dec_intr_halt(int irq, void *dev_id, struct pt_regs *regs);
 
-extern asmlinkage void decstation_handle_int(void);
-
 unsigned long dec_kn_slot_base, dec_kn_slot_size;
 
 EXPORT_SYMBOL(dec_kn_slot_base);
@@ -744,7 +742,6 @@ void __init arch_init_irq(void)
 		panic("Don't know how to set this up!");
 		break;
 	}
-	set_except_vector(0, decstation_handle_int);
 
 	/* Free the FPU interrupt if the exception is present. */
 	if (!cpu_has_nofpuex) {

arch/mips/galileo-boards/ev96100/Makefile

@@ -6,4 +6,4 @@
 # Makefile for the Galileo EV96100 board.
 #
 
-obj-y		+= init.o irq.o puts.o reset.o time.o int-handler.o setup.o
+obj-y		+= init.o irq.o puts.o reset.o time.o setup.o

arch/mips/galileo-boards/ev96100/int-handler.S

-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.set	noat
-	.align	5
-
-NESTED(ev96100IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-	mfc0	t0, CP0_CAUSE		# get pending interrupts
-	mfc0	t1, CP0_STATUS		# get enabled interrupts
-	and	t0, t1			# isolate allowed ones
-
-	# FIX ME add R7000 extensions
-	andi	t0,0xff00		# isolate pending bits
-	andi	a0, t0, CAUSEF_IP7
-	beq	a0, zero, 1f
-	move	a0, sp
-	jal	mips_timer_interrupt
-	j	ret_from_irq
-
-1:	beqz	t0, 3f			# spurious interrupt
-
-	move	a0, t0
-	move	a1, sp
-	jal	ev96100_cpu_irq
-	j	ret_from_irq
-
-3:	j	spurious_interrupt
-	END(ev96100IRQ)

arch/mips/galileo-boards/ev96100/irq.c

@@ -40,8 +40,6 @@
 #include <linux/interrupt.h>
 #include <asm/irq_cpu.h>
 
-extern asmlinkage void ev96100IRQ(void);
-
 static inline unsigned int ffz8(unsigned int word)
 {
 	unsigned long k;
@@ -54,13 +52,26 @@ static inline unsigned int ffz8(unsigned int word)
 	return k;
 }
 
-asmlinkage void ev96100_cpu_irq(unsigned int pendin)
+extern void mips_timer_interrupt(struct pt_regs *regs);
+
+asmlinkage void ev96100_cpu_irq(unsigned int pending, struct pt_regs *regs)
 {
 	do_IRQ(ffz8(pending >> 8), regs);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & CAUSEF_IP7)
+		mips_timer_interrupt(regs);
+	else if (pending)
+		ev96100_cpu_irq(pending, regs);
+	else
+		spurious_interrupt(regs);
+}
+
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, ev96100IRQ);
 	mips_cpu_irq_init(0);
 }

arch/mips/gt64120/ev64120/Makefile

@@ -6,6 +6,6 @@
 # Makefile for the Galileo EV64120 board.
 #
 
-obj-y	+= int-handler.o irq.o promcon.o reset.o serialGT.o setup.o
+obj-y	+= irq.o promcon.o reset.o serialGT.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/gt64120/ev64120/int-handler.S

-/*
- * int-handler.S
- *
- * Based on the cobalt handler.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * galileo_handle_int -
- *      We check for the timer first, then check PCI ints A and D.
- *      Then check for serial IRQ and fall through.
- */
-		.align	5
-		.set	reorder
-		.set	noat
-		NESTED(galileo_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0,CP0_CAUSE
-		mfc0	t2,CP0_STATUS
-
-		and	t0,t2
-
-		andi	t1,t0,STATUSF_IP4 /* int2 hardware line (timer) */
-		bnez	t1,ll_gt64120_irq
-		andi	t1,t0,STATUSF_IP2 /* int0 hardware line */
-		bnez	t1,ll_pci_intA
-		andi	t1,t0,STATUSF_IP5 /* int3 hardware line */
-		bnez	t1,ll_pci_intD
-		andi	t1,t0,STATUSF_IP6 /* int4 hardware line */
-		bnez	t1,ll_serial_irq
-		andi	t1,t0,STATUSF_IP7 /* compare int */
-		bnez	t1,ll_compare_irq
-		nop
-
-    /* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(galileo_handle_int)
-
-
-		.align	5
-		.set	reorder
-ll_gt64120_irq:
-		li	a0,4
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_compare_irq:
-		li 	a0,7
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_pci_intA:
-		move	a0,sp
-		jal	pci_intA
-		nop
-		j	ret_from_irq
-		nop
-
-#if 0
-		.align	5
-		.set	reorder
-ll_pci_intB:
-		move 	a0,sp
-		jal	pci_intB
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_pci_intC:
-		move 	a0,sp
-		jal	pci_intC
-		nop
-		j	ret_from_irq
-		nop
-#endif
-
-		.align	5
-		.set	reorder
-ll_pci_intD:
-		move 	a0,sp
-		jal	pci_intD
-		nop
-		j	ret_from_irq
-		nop
-
-		.align	5
-		.set	reorder
-ll_serial_irq:
-		li	a0,6
-		move	a1,sp
-		jal	do_IRQ
-		nop
-		j	ret_from_irq
-		nop

arch/mips/gt64120/ev64120/irq.c

@@ -46,14 +46,22 @@
 #include <asm/system.h>
 #include <asm/gt64120.h>
 
-asmlinkage inline void pci_intA(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
-	do_IRQ(GT_INTA, regs);
-}
-
-asmlinkage inline void pci_intD(struct pt_regs *regs)
-{
-	do_IRQ(GT_INTD, regs);
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP4)		/* int2 hardware line (timer) */
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP2)		/* int0 hardware line */
+		do_IRQ(GT_INTA, regs);
+	else if (pending & STATUSF_IP5)		/* int3 hardware line */
+		do_IRQ(GT_INTD, regs);
+	else if (pending & STATUSF_IP6)		/* int4 hardware line */
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)		/* compare int */
+		do_IRQ(7, regs);
+	else
+		spurious_interrupt(regs);
 }
 
 static void disable_ev64120_irq(unsigned int irq_nr)
@@ -109,16 +117,11 @@ static struct hw_interrupt_type ev64120_irq_type = {
 
 void gt64120_irq_setup(void)
 {
-	extern asmlinkage void galileo_handle_int(void);
-
 	/*
 	 * Clear all of the interrupts while we change the able around a bit.
 	 */
 	clear_c0_status(ST0_IM);
 
-	/* Sets the exception_handler array. */
-	set_except_vector(0, galileo_handle_int);
-
 	local_irq_disable();
 
 	/*

arch/mips/gt64120/momenco_ocelot/Makefile

@@ -2,7 +2,7 @@
 # Makefile for Momentum's Ocelot board.
 #
 
-obj-y	 		+= int-handler.o irq.o prom.o reset.o setup.o
+obj-y	 		+= irq.o prom.o reset.o setup.o
 
 obj-$(CONFIG_KGDB)	+= dbg_io.o
 

arch/mips/gt64120/momenco_ocelot/int-handler.S

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: jsun@mvista.com or jsun@junsun.net
- *
- * First-level interrupt dispatcher for ocelot board.
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/addrspace.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * first level interrupt dispatcher for ocelot board -
- * We check for the timer first, then check PCI ints A and D.
- * Then check for serial IRQ and fall through.
- */
-		.align	5
-		NESTED(ocelot_handle_int, PT_SIZE, sp)
-		SAVE_ALL
-		CLI
-		.set	at
-		mfc0	t0, CP0_CAUSE
-		mfc0	t2, CP0_STATUS
-
-		and	t0, t2
-
-		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
-		bnez	t1, ll_pri_enet_irq
-		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
-		bnez	t1, ll_sec_enet_irq
-		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
-		bnez	t1, ll_uart1_irq
-		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
-		bnez	t1, ll_cpci_irq
-		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
-		bnez	t1, ll_galileo_irq
-		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
-		bnez	t1, ll_cputimer_irq
-
-                /* now look at the extended interrupts */
-		mfc0	t0, CP0_CAUSE
-		cfc0	t1, CP0_S1_INTCONTROL
-
-		/* shift the mask 8 bits left to line up the bits */
-		 sll	t2, t1, 8
-
-		 and	t0, t2
-		 srl	t0, t0, 16
-
-		 andi	t1, t0, STATUSF_IP8	/* int6 hardware line */
-		bnez	t1, ll_pmc1_irq
-		 andi	t1, t0, STATUSF_IP9	/* int7 hardware line */
-		bnez	t1, ll_pmc2_irq
-		 andi	t1, t0, STATUSF_IP10	/* int8 hardware line */
-		bnez	t1, ll_cpci_abcd_irq
-		 andi	t1, t0, STATUSF_IP11	/* int9 hardware line */
-		bnez	t1, ll_uart2_irq
-
-		.set	reorder
-
-		/* wrong alarm or masked ... */
-		j	spurious_interrupt
-		nop
-		END(ocelot_handle_int)
-
-		.align	5
-ll_pri_enet_irq:
-		li	a0, 2
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_sec_enet_irq:
-		li	a0, 3
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart1_irq:
-		li	a0, 4
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_irq:
-		li	a0, 5
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_galileo_irq:
-		li	a0, 6
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cputimer_irq:
-		li	a0, 7
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pmc1_irq:
-		li	a0, 8
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_pmc2_irq:
-		li	a0, 9
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_cpci_abcd_irq:
-		li	a0, 10
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq
-
-ll_uart2_irq:
-		li	a0, 11
-		move	a1, sp
-		jal	do_IRQ
-		j	ret_from_irq

arch/mips/gt64120/momenco_ocelot/irq.c

@@ -48,7 +48,38 @@
 #include <asm/mipsregs.h>
 #include <asm/system.h>
 
-extern asmlinkage void ocelot_handle_int(void);
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_status() & read_c0_cause();
+
+	if (pending & STATUSF_IP2)		/* int0 hardware line */
+		do_IRQ(2, regs);
+	else if (pending & STATUSF_IP3)		/* int1 hardware line */
+		do_IRQ(3, regs);
+	else if (pending & STATUSF_IP4)		/* int2 hardware line */
+		do_IRQ(4, regs);
+	else if (pending & STATUSF_IP5)		/* int3 hardware line */
+		do_IRQ(5, regs);
+	else if (pending & STATUSF_IP6)		/* int4 hardware line */
+		do_IRQ(6, regs);
+	else if (pending & STATUSF_IP7)		/* cpu timer */
+		do_IRQ(7, regs);
+	else {
+		/*
+		 * Now look at the extended interrupts
+		 */
+		pending = (read_c0_cause() & (read_c0_intcontrol() << 8)) >> 16;
+
+		if (pending & STATUSF_IP8)		/* int6 hardware line */
+			do_IRQ(8, regs);
+		else if (pending & STATUSF_IP9)		/* int7 hardware line */
+			do_IRQ(9, regs);
+		else if (pending & STATUSF_IP10)	/* int8 hardware line */
+			do_IRQ(10, regs);
+		else if (pending & STATUSF_IP11)	/* int9 hardware line */
+			do_IRQ(11, regs);
+	}
+}
 
 void __init arch_init_irq(void)
 {
@@ -59,9 +90,6 @@ void __init arch_init_irq(void)
 	clear_c0_status(ST0_IM);
 	local_irq_disable();
 
-	/* Sets the first-level interrupt dispatcher. */
-	set_except_vector(0, ocelot_handle_int);
-
 	mips_cpu_irq_init(0);
 	rm7k_cpu_irq_init(8);
 }

arch/mips/ite-boards/generic/Makefile

@@ -6,7 +6,7 @@
 # Makefile for the ITE 8172 (qed-4n-s01b) board, generic files.
 #
 
-obj-y			+= it8172_setup.o irq.o int-handler.o pmon_prom.o \
+obj-y			+= it8172_setup.o irq.o pmon_prom.o \
 			   time.o lpc.o puts.o reset.o
 
 obj-$(CONFIG_IT8172_CIR)+= it8172_cir.o

arch/mips/ite-boards/generic/int-handler.S

-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-	.text
-	.set    macro
-	.set    noat
-	.align	5
-
-NESTED(it8172_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI				# Important: mark KERNEL mode !
-
-        /* We're working with 'reorder' set at this point. */
-	/*
-	 * Get pending interrupts
-	 */
-
-	mfc0	t0,CP0_CAUSE		# get pending interrupts
-	mfc0	t1,CP0_STATUS		# get enabled interrupts
-	and	t0,t1			# isolate allowed ones
-
-	andi	t0,0xff00		# isolate pending bits
-        beqz    t0, 3f                  # spurious interrupt
-
-        andi    a0, t0, CAUSEF_IP7
-        beq     a0, zero, 1f
-
-        li	a0, 127			# MIPS_CPU_TIMER_IRQ = (NR_IRQS-1)
-        move    a1, sp
-        jal     ll_timer_interrupt
-	j	ret_from_irq
-        nop
-
-1:
-        andi    a0, t0, CAUSEF_IP2      # the only int we expect at this time
-        beq     a0, zero, 3f
-	move	a0,sp
-	jal	it8172_hw0_irqdispatch
-
-	mfc0	t0,CP0_STATUS		# disable interrupts
-	ori	t0,1
-	xori	t0,1
-	mtc0	t0,CP0_STATUS
-        nop
-        nop
-        nop
-
-	la      a1, ret_from_irq
-	jr	a1
-        nop
-
-3:
-	move a0, sp
-	jal	mips_spurious_interrupt
-        nop
-	la      a1, ret_from_irq
-	jr	a1
-        nop
-
-END(it8172_IRQ)
-

arch/mips/ite-boards/generic/irq.c

@@ -62,12 +62,8 @@
 
 #define ALLINTS_NOTIMER (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
 
-void disable_it8172_irq(unsigned int irq_nr);
-void enable_it8172_irq(unsigned int irq_nr);
-
 extern void set_debug_traps(void);
 extern void mips_timer_interrupt(int irq, struct pt_regs *regs);
-extern asmlinkage void it8172_IRQ(void);
 
 struct it8172_intc_regs volatile *it8172_hw0_icregs =
 	(struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE));
@@ -181,8 +177,6 @@ void __init arch_init_irq(void)
 	int i;
         unsigned long flags;
 
-        set_except_vector(0, it8172_IRQ);
-
 	/* mask all interrupts */
 	it8172_hw0_icregs->lb_mask  = 0xffff;
 	it8172_hw0_icregs->lpc_mask = 0xffff;
@@ -282,6 +276,18 @@ void it8172_hw0_irqdispatch(struct pt_regs *regs)
 	do_IRQ(irq, regs);
 }
 
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (!pending)
+		mips_spurious_interrupt(regs);
+	else if (pending & CAUSEF_IP7)
+		ll_timer_interrupt(127, regs);
+	else if (pending & CAUSEF_IP2)
+		it8172_hw0_irqdispatch(regs);
+}
+
 void show_pending_irqs(void)
 {
 	fputs("intstatus:  ");

arch/mips/ite-boards/generic/time.c

@@ -29,6 +29,7 @@
 #include <linux/sched.h>
 #include <linux/time.h>
 #include <linux/spinlock.h>
+#include <linux/mc146818rtc.h>
 
 #include <asm/time.h>
 #include <asm/mipsregs.h>

arch/mips/ite-boards/ivr/init.c

@@ -34,13 +34,13 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/sections.h>
 #include <asm/it8172/it8172.h>
 #include <asm/it8172/it8172_dbg.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
 
-extern char _end;
 extern void  __init prom_init_cmdline(void);
 extern unsigned long __init prom_get_memsize(void);
 extern void __init it8172_init_ram_resource(unsigned long memsize);

arch/mips/ite-boards/qed-4n-s01b/init.c

@@ -34,13 +34,13 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
+#include <asm/sections.h>
 #include <asm/it8172/it8172.h>
 #include <asm/it8172/it8172_dbg.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;
 
-extern char _end;
 extern void  __init prom_init_cmdline(void);
 extern unsigned long __init prom_get_memsize(void);
 extern void __init it8172_init_ram_resource(unsigned long memsize);

arch/mips/jazz/Makefile

@@ -2,6 +2,6 @@
 # Makefile for the Jazz family specific parts of the kernel
 #
 
-obj-y	 	:= int-handler.o irq.o jazzdma.o reset.o setup.o
+obj-y	 	:= irq.o jazzdma.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/jazz/int-handler.S

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle and Andreas Busse
- *
- * Jazz family specific interrupt stuff
- *
- * To do: On Jazz machines we remap some non-ISA interrupts to ISA
- *        interrupts.  These interrupts should use their own vectors.
- *        Squeeze the last cycles out of the handlers.  Only a dead
- *        cycle is a good cycle.
- */
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/jazz.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-
-/*
- * jazz_handle_int: Interrupt handler for the ACER Pica-61 boards
- */
-		.set	noreorder
-
-		NESTED(jazz_handle_int, PT_SIZE, ra)
-		.set	noat
-		SAVE_ALL
-		CLI
-		.set	at
-
-		/*
-		 * Get pending interrupts
-		 */
-		mfc0	t0,CP0_CAUSE		# get pending interrupts
-		mfc0	t1,CP0_STATUS		# get enabled interrupts
-		and	t0,t1			# isolate allowed ones
-		andi	t0,0xff00		# isolate pending bits
-		beqz	t0,3f
-		sll	t0,16			# delay slot
-
-		/*
-		 * Find irq with highest priority
-		 * FIXME: This is slow - use binary search
-		 */
-		la	t1,ll_vectors
-1:		bltz	t0,2f			# found pending irq
-		sll	t0,1
-		b	1b
-		subu	t1,PTRSIZE		# delay slot
-
-		/*
-		 * Do the low-level stuff
-		 */
-2:		lw	t0,(t1)
-		jr	t0
-		nop				# delay slot
-		END(jazz_handle_int)
-
-ll_sw0:		li	s1,~IE_SW0
-		mfc0	t0,CP0_CAUSE
-		and	t0,s1
-		mtc0	t0,CP0_CAUSE
-		PANIC("Unimplemented sw0 handler")
-
-ll_sw1:		li	s1,~IE_SW1
-		mfc0	t0,CP0_CAUSE
-		and	t0,s1
-		mtc0	t0,CP0_CAUSE
-		PANIC("Unimplemented sw1 handler")
-
-ll_local_dma:	li	s1,~IE_IRQ0
-		PANIC("Unimplemented local_dma handler")
-
-ll_local_dev:	lbu	t0,JAZZ_IO_IRQ_SOURCE
-#if PTRSIZE == 8	/* True 64 bit kernel */
-		dsll	t0,1
-#endif
-		.set	reorder
-		LONG_L	t0,local_vector(t0)
-		jr	t0
-		.set	noreorder
-
-/*
- * The braindead PICA hardware gives us no way to distinguish if we really
- * received interrupt 7 from the (E)ISA bus or if we just received an
- * interrupt with no findable cause.  This sometimes happens with braindead
- * cards.  Oh well - for all the Jazz boxes slots are more or less just
- * whistles and bells and we're aware of the problem.
- */
-ll_isa_irq:	lw	a0, JAZZ_EISA_IRQ_ACK
-
-		jal	do_IRQ
-		 move	a1,sp
-
-		j	ret_from_irq
-		nop
-
-/*
- * Hmm...  This is not just a plain PC clone so the question is
- * which devices on Jazz machines can generate an (E)ISA NMI?
- * (Writing to nonexistent memory?)
- */
-ll_isa_nmi:	li	s1,~IE_IRQ3
-		PANIC("Unimplemented isa_nmi handler")
-
-/*
- * Timer IRQ - remapped to be more similar to an IBM compatible.
- *
- * The timer interrupt is handled specially to ensure that the jiffies
- * variable is updated at all times.  Specifically, the timer interrupt is
- * just like the complete handlers except that it is invoked with interrupts
- * disabled and should never re-enable them.  If other interrupts were
- * allowed to be processed while the timer interrupt is active, then the
- * other interrupts would have to avoid using the jiffies variable for delay
- * and interval timing operations to avoid hanging the system.
- */
-ll_timer:	lw	zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
-		li	s1,~IE_IRQ4
-
-		li	a0, JAZZ_TIMER_IRQ
-		jal	do_IRQ
-		 move	a1,sp
-
-		mfc0	t0,CP0_STATUS		# disable interrupts again
-		ori	t0,1
-		xori	t0,1
-		mtc0	t0,CP0_STATUS
-
-		j	ret_from_irq
-		 nop
-
-/*
- * CPU count/compare IRQ (unused)
- */
-ll_count:	j	ret_from_irq
-		 mtc0	zero,CP0_COMPARE
-
-#if 0
-/*
- * Call the handler for the interrupt
- * (Currently unused)
- */
-call_real:	/*
-		 * temporarily disable interrupt
-		 */
-		mfc0	t2,CP0_STATUS
-		and	t2,s1
-		mtc0	t2,CP0_STATUS
-		nor	s1,zero,s1
-		jal	do_IRQ
-
-		/*
-		 * reenable interrupt
-		 */
-		mfc0	t2,CP0_STATUS
-		or	t2,s1
-		mtc0	t2,CP0_STATUS
-		j	ret_from_irq
-#endif
-
-		.data
-		PTR	ll_sw0			# SW0
-		PTR	ll_sw1			# SW1
-		PTR	ll_local_dma		# Local DMA
-		PTR	ll_local_dev		# Local devices
-		PTR	ll_isa_irq		# ISA IRQ
-		PTR	ll_isa_nmi		# ISA NMI
-		PTR	ll_timer		# Timer
-ll_vectors:	PTR	ll_count		# Count/Compare IRQ
-
-		/*
-		 * Interrupt handlers for local devices.
-		 */
-		.text
-		.set	reorder
-loc_no_irq:	PANIC("Unimplemented loc_no_irq handler")
-/*
- * Parallel port IRQ
- */
-loc_parallel:	li	s1,~JAZZ_IE_PARALLEL
-		li	a0,JAZZ_PARALLEL_IRQ
-		b	loc_call
-
-/*
- * Floppy IRQ
- */
-loc_floppy:	li	s1,~JAZZ_IE_FLOPPY
-		li	a0,JAZZ_FLOPPY_IRQ
-		b	loc_call
-
-/*
- * Sound IRQ
- */
-loc_sound:	PANIC("Unimplemented loc_sound handler")
-loc_video:	PANIC("Unimplemented loc_video handler")
-
-/*
- * Ethernet interrupt handler
- */
-loc_ethernet: 	li	s1,~JAZZ_IE_ETHERNET
-		li	a0,JAZZ_ETHERNET_IRQ
-		b	loc_call
-
-/*
- * SCSI interrupt handler
- */
-loc_scsi:	li	s1,~JAZZ_IE_SCSI
-		li	a0,JAZZ_SCSI_IRQ
-		b	loc_call
-
-/*
- * Keyboard interrupt handler
- */
-loc_keyboard:	li	s1,~JAZZ_IE_KEYBOARD
-		li	a0,JAZZ_KEYBOARD_IRQ
-		b	loc_call
-
-/*
- * Mouse interrupt handler
- */
-loc_mouse:	li	s1,~JAZZ_IE_MOUSE
-		li	a0,JAZZ_MOUSE_IRQ
-		b	loc_call
-
-/*
- * Serial port 1 IRQ
- */
-loc_serial1:	li	s1,~JAZZ_IE_SERIAL1
-		li	a0,JAZZ_SERIAL1_IRQ
-		b	loc_call
-
-/*
- * Serial port 2 IRQ
- */
-loc_serial2:	li	s1,~JAZZ_IE_SERIAL2
-		li	a0,JAZZ_SERIAL2_IRQ
-		b	loc_call
-
-/*
- * Call the interrupt handler for an interrupt generated by a
- * local device.
- */
-loc_call:	/*
-		 * Temporarily disable interrupt source
-		 */
-		lhu	t2,JAZZ_IO_IRQ_ENABLE
-		and	t2,s1
-		sh	t2,JAZZ_IO_IRQ_ENABLE
-
-		nor	s1,zero,s1
-		jal	do_IRQ
-
-		/*
-		 * Reenable interrupt
-		 */
-		lhu	t2,JAZZ_IO_IRQ_ENABLE
-		or	t2,s1
-		sh	t2,JAZZ_IO_IRQ_ENABLE
-
-		j	ret_from_irq
-
-/*
- * "Jump extender" to reach spurious_interrupt
- */
-3:		j	spurious_interrupt
-
-/*
- * Vectors for interrupts generated by local devices
- */
-		.data
-local_vector:	PTR	loc_no_irq
-		PTR	loc_parallel
-		PTR	loc_floppy
-		PTR	loc_sound
-		PTR	loc_video
-		PTR	loc_ethernet
-		PTR	loc_scsi
-		PTR	loc_keyboard
-		PTR	loc_mouse
-		PTR	loc_serial1
-		PTR	loc_serial2

arch/mips/jazz/irq.c

@@ -15,8 +15,6 @@
 #include <asm/io.h>
 #include <asm/jazz.h>
 
-extern asmlinkage void jazz_handle_int(void);
-
 static DEFINE_SPINLOCK(r4030_lock);
 
 static void enable_r4030_irq(unsigned int irq)
@@ -90,10 +88,82 @@ void __init init_r4030_ints(void)
  */
 void __init arch_init_irq(void)
 {
-	set_except_vector(0, jazz_handle_int);
-
 	init_i8259_irqs();			/* Integrated i8259  */
 	init_r4030_ints();
 
 	change_c0_status(ST0_IM, IE_IRQ4 | IE_IRQ3 | IE_IRQ2 | IE_IRQ1);
 }
+
+static void loc_call(unsigned int irq, struct pt_regs *regs, unsigned int mask)
+{
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE,
+	                  r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) & mask);
+	do_IRQ(irq, regs);
+	r4030_write_reg16(JAZZ_IO_IRQ_ENABLE,
+	                  r4030_read_reg16(JAZZ_IO_IRQ_ENABLE) | mask);
+}
+
+static void ll_local_dev(struct pt_regs *regs)
+{
+	switch (r4030_read_reg32(JAZZ_IO_IRQ_SOURCE)) {
+	case 0:
+		panic("Unimplemented loc_no_irq handler");
+		break;
+	case 4:
+		loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_PARALLEL);
+		break;
+	case 8:
+		loc_call(JAZZ_PARALLEL_IRQ, regs, JAZZ_IE_FLOPPY);
+		break;
+	case 12:
+		panic("Unimplemented loc_sound handler");
+		break;
+	case 16:
+		panic("Unimplemented loc_video handler");
+		break;
+	case 20:
+		loc_call(JAZZ_ETHERNET_IRQ, regs, JAZZ_IE_ETHERNET);
+		break;
+	case 24:
+		loc_call(JAZZ_SCSI_IRQ, regs, JAZZ_IE_SCSI);
+		break;
+	case 28:
+		loc_call(JAZZ_KEYBOARD_IRQ, regs, JAZZ_IE_KEYBOARD);
+		break;
+	case 32:
+		loc_call(JAZZ_MOUSE_IRQ, regs, JAZZ_IE_MOUSE);
+		break;
+	case 36:
+		loc_call(JAZZ_SERIAL1_IRQ, regs, JAZZ_IE_SERIAL1);
+		break;
+	case 40:
+		loc_call(JAZZ_SERIAL2_IRQ, regs, JAZZ_IE_SERIAL2);
+		break;
+	}
+}
+
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
+{
+	unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
+
+	if (pending & IE_IRQ5)
+		write_c0_compare(0);
+	else if (pending & IE_IRQ4) {
+		r4030_read_reg32(JAZZ_TIMER_REGISTER);
+		do_IRQ(JAZZ_TIMER_IRQ, regs);
+	} else if (pending & IE_IRQ3)
+		panic("Unimplemented ISA NMI handler");
+	else if (pending & IE_IRQ2)
+		do_IRQ(r4030_read_reg32(JAZZ_EISA_IRQ_ACK), regs);
+	else if (pending & IE_IRQ1) {
+		ll_local_dev(regs);
+	} else if (unlikely(pending & IE_IRQ0))
+		panic("Unimplemented local_dma handler");
+	else if (pending & IE_SW1) {
+		clear_c0_cause(IE_SW1);
+		panic("Unimplemented sw1 handler");
+	} else if (pending & IE_SW0) {
+		clear_c0_cause(IE_SW0);
+		panic("Unimplemented sw0 handler");
+	}
+}

arch/mips/jmr3927/common/rtc_ds1742.c

@@ -60,15 +60,15 @@ rtc_ds1742_get_time(void)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	second = BCD2BIN(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	minute = BCD2BIN(CMOS_READ(RTC_MINUTES));
-	hour = BCD2BIN(CMOS_READ(RTC_HOURS));
-	day = BCD2BIN(CMOS_READ(RTC_DATE));
-	month = BCD2BIN(CMOS_READ(RTC_MONTH));
-	year = BCD2BIN(CMOS_READ(RTC_YEAR));
-	century = BCD2BIN(CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK);
-	CMOS_WRITE(0, RTC_CONTROL);
+	rtc_write(RTC_READ, RTC_CONTROL);
+	second = BCD2BIN(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	minute = BCD2BIN(rtc_read(RTC_MINUTES));
+	hour = BCD2BIN(rtc_read(RTC_HOURS));
+	day = BCD2BIN(rtc_read(RTC_DATE));
+	month = BCD2BIN(rtc_read(RTC_MONTH));
+	year = BCD2BIN(rtc_read(RTC_YEAR));
+	century = BCD2BIN(rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK);
+	rtc_write(0, RTC_CONTROL);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	year += century * 100;
@@ -87,16 +87,16 @@ rtc_ds1742_set_time(unsigned long t)
 	unsigned long flags;
 
 	spin_lock_irqsave(&rtc_lock, flags);
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	cmos_minute = (u8)CMOS_READ(RTC_MINUTES);
-	cmos_hour = (u8)CMOS_READ(RTC_HOURS);
-	cmos_day = (u8)CMOS_READ(RTC_DATE);
-	cmos_month = (u8)CMOS_READ(RTC_MONTH);
-	cmos_year = (u8)CMOS_READ(RTC_YEAR);
-	cmos_century = CMOS_READ(RTC_CENTURY) & RTC_CENTURY_MASK;
+	rtc_write(RTC_READ, RTC_CONTROL);
+	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	cmos_minute = (u8)rtc_read(RTC_MINUTES);
+	cmos_hour = (u8)rtc_read(RTC_HOURS);
+	cmos_day = (u8)rtc_read(RTC_DATE);
+	cmos_month = (u8)rtc_read(RTC_MONTH);
+	cmos_year = (u8)rtc_read(RTC_YEAR);
+	cmos_century = rtc_read(RTC_CENTURY) & RTC_CENTURY_MASK;
 
-	CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
+	rtc_write(RTC_WRITE, RTC_CONTROL);
 
 	/* convert */
 	to_tm(t, &tm);
@@ -104,18 +104,18 @@ rtc_ds1742_set_time(unsigned long t)
 	/* check each field one by one */
 	year = BIN2BCD(tm.tm_year - EPOCH);
 	if (year != cmos_year) {
-		CMOS_WRITE(year,RTC_YEAR);
+		rtc_write(year,RTC_YEAR);
 	}
 
 	month = BIN2BCD(tm.tm_mon);
 	if (month != (cmos_month & 0x1f)) {
-		CMOS_WRITE((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
+		rtc_write((month & 0x1f) | (cmos_month & ~0x1f),RTC_MONTH);
 	}
 
 	day = BIN2BCD(tm.tm_mday);
 	if (day != cmos_day) {
 
-		CMOS_WRITE(day, RTC_DATE);
+		rtc_write(day, RTC_DATE);
 	}
 
 	if (cmos_hour & 0x40) {
@@ -130,20 +130,20 @@ rtc_ds1742_set_time(unsigned long t)
 		/* 24 hour format */
 		hour = BIN2BCD(tm.tm_hour) & 0x3f;
 	}
-	if (hour != cmos_hour) CMOS_WRITE(hour, RTC_HOURS);
+	if (hour != cmos_hour) rtc_write(hour, RTC_HOURS);
 
 	minute = BIN2BCD(tm.tm_min);
 	if (minute !=  cmos_minute) {
-		CMOS_WRITE(minute, RTC_MINUTES);
+		rtc_write(minute, RTC_MINUTES);
 	}
 
 	second = BIN2BCD(tm.tm_sec);
 	if (second !=  cmos_second) {
-		CMOS_WRITE(second & RTC_SECONDS_MASK,RTC_SECONDS);
+		rtc_write(second & RTC_SECONDS_MASK,RTC_SECONDS);
 	}
 
 	/* RTC_CENTURY and RTC_CONTROL share same address... */
-	CMOS_WRITE(cmos_century, RTC_CONTROL);
+	rtc_write(cmos_century, RTC_CONTROL);
 	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return 0;
@@ -163,9 +163,9 @@ rtc_ds1742_init(unsigned long base)
 	rtc_mips_set_time = rtc_ds1742_set_time;
 
 	/* clear oscillator stop bit */
-	CMOS_WRITE(RTC_READ, RTC_CONTROL);
-	cmos_second = (u8)(CMOS_READ(RTC_SECONDS) & RTC_SECONDS_MASK);
-	CMOS_WRITE(RTC_WRITE, RTC_CONTROL);
-	CMOS_WRITE(cmos_second, RTC_SECONDS); /* clear msb */
-	CMOS_WRITE(0, RTC_CONTROL);
+	rtc_write(RTC_READ, RTC_CONTROL);
+	cmos_second = (u8)(rtc_read(RTC_SECONDS) & RTC_SECONDS_MASK);
+	rtc_write(RTC_WRITE, RTC_CONTROL);
+	rtc_write(cmos_second, RTC_SECONDS); /* clear msb */
+	rtc_write(0, RTC_CONTROL);
 }

arch/mips/jmr3927/rbhma3100/Makefile

@@ -2,7 +2,7 @@
 # Makefile for TOSHIBA JMR-TX3927 board
 #
 
-obj-y	 			+= init.o int-handler.o irq.o setup.o
+obj-y	 			+= init.o irq.o setup.o
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o
 

arch/mips/jmr3927/rbhma3100/int-handler.S

-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *              ahennessy@mvista.com
- *
- * Based on arch/mips/tsdb/kernel/int-handler.S
- *
- * Copyright (C) 2000-2001 Toshiba Corporation
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <asm/asm.h>
-#include <asm/mipsregs.h>
-#include <asm/regdef.h>
-#include <asm/stackframe.h>
-#include <asm/jmr3927/jmr3927.h>
-
-	/* A lot of complication here is taken away because:
-	 *
-	 * 1) We handle one interrupt and return, sitting in a loop
-	 *    and moving across all the pending IRQ bits in the cause
-	 *    register is _NOT_ the answer, the common case is one
-	 *    pending IRQ so optimize in that direction.
-	 *
-	 * 2) We need not check against bits in the status register
-	 *    IRQ mask, that would make this routine slow as hell.
-	 *
-	 * 3) Linux only thinks in terms of all IRQs on or all IRQs
-	 *    off, nothing in between like BSD spl() brain-damage.
-	 *
-	 */
-
-/* Flush write buffer (needed?)
- * NOTE: TX39xx performs "non-blocking load", so explicitly use the target
- * register of LBU to flush immediately.
- */
-#define FLUSH_WB(tmp)	\
-	la	tmp, JMR3927_IOC_REV_ADDR; \
-	lbu	tmp, (tmp); \
-	move	tmp, zero;
-
-	.text
-	.set	noreorder
-	.set	noat
-	.align	5
-	NESTED(jmr3927_IRQ, PT_SIZE, sp)
-	SAVE_ALL
-	CLI
-	.set	at
-	jal	jmr3927_irc_irqdispatch
-	 move	a0, sp
-	FLUSH_WB(t0)
-	j	ret_from_irq
-	 nop
-	END(jmr3927_IRQ)

arch/mips/jmr3927/rbhma3100/irq.c

@@ -77,8 +77,6 @@ static int jmr3927_gen_iack(void)
 }
 #endif
 
-extern asmlinkage void jmr3927_IRQ(void);
-
 #define irc_dlevel	0
 #define irc_elevel	1
 
@@ -262,7 +260,7 @@ void jmr3927_spurious(struct pt_regs *regs)
 	       regs->cp0_cause, regs->cp0_epc, regs->regs[31]);
 }
 
-void jmr3927_irc_irqdispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	int irq;
 
@@ -398,8 +396,6 @@ void __init arch_init_irq(void)
 
 	jmr3927_irq_init(NR_ISA_IRQS);
 
-	set_except_vector(0, jmr3927_IRQ);
-
 	/* setup irq space */
 	add_tb_irq_space(&jmr3927_isac_irqspace);
 	add_tb_irq_space(&jmr3927_ioc_irqspace);

arch/mips/kernel/Makefile

@@ -34,8 +34,11 @@ obj-$(CONFIG_CPU_R6000)		+= r6000_fpu.o r4k_switch.o
 
 obj-$(CONFIG_SMP)		+= smp.o
 
-obj-$(CONFIG_MIPS_MT_SMP)	+= smp_mt.o
+obj-$(CONFIG_MIPS_MT)		+= mips-mt.o
+obj-$(CONFIG_MIPS_MT_SMTC)	+= smtc.o smtc-asm.o smtc-proc.o
+obj-$(CONFIG_MIPS_MT_SMP)	+= smp-mt.o
 
+obj-$(CONFIG_MIPS_APSP_KSPD)	+= kspd.o
 obj-$(CONFIG_MIPS_VPE_LOADER)	+= vpe.o
 obj-$(CONFIG_MIPS_VPE_APSP_API)	+= rtlx.o
 

arch/mips/kernel/asm-offsets.c

@@ -69,6 +69,9 @@ void output_ptreg_defines(void)
 	offset("#define PT_BVADDR ", struct pt_regs, cp0_badvaddr);
 	offset("#define PT_STATUS ", struct pt_regs, cp0_status);
 	offset("#define PT_CAUSE  ", struct pt_regs, cp0_cause);
+#ifdef CONFIG_MIPS_MT_SMTC
+	offset("#define PT_TCSTATUS  ", struct pt_regs, cp0_tcstatus);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	size("#define PT_SIZE   ", struct pt_regs);
 	linefeed;
 }

arch/mips/kernel/entry.S

@@ -17,6 +17,9 @@
 #include <asm/isadep.h>
 #include <asm/thread_info.h>
 #include <asm/war.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif
 
 #ifdef CONFIG_PREEMPT
 	.macro	preempt_stop
@@ -75,6 +78,37 @@ FEXPORT(syscall_exit)
 	bnez	t0, syscall_exit_work
 
 FEXPORT(restore_all)			# restore full frame
+#ifdef CONFIG_MIPS_MT_SMTC
+/* Detect and execute deferred IPI "interrupts" */
+	move	a0,sp
+	jal	deferred_smtc_ipi
+/* Re-arm any temporarily masked interrupts not explicitly "acked" */
+	mfc0	v0, CP0_TCSTATUS
+	ori	v1, v0, TCSTATUS_IXMT
+	mtc0	v1, CP0_TCSTATUS
+	andi	v0, TCSTATUS_IXMT
+	ehb
+	mfc0	t0, CP0_TCCONTEXT
+	DMT	9				# dmt t1
+	jal	mips_ihb
+	mfc0	t2, CP0_STATUS
+	andi	t3, t0, 0xff00
+	or	t2, t2, t3
+	mtc0	t2, CP0_STATUS
+	ehb
+	andi	t1, t1, VPECONTROL_TE
+	beqz	t1, 1f
+	EMT
+1:
+	mfc0	v1, CP0_TCSTATUS
+	/* We set IXMT above, XOR should cler it here */
+	xori	v1, v1, TCSTATUS_IXMT
+	or	v1, v0, v1
+	mtc0	v1, CP0_TCSTATUS
+	ehb
+	xor	t0, t0, t3
+	mtc0	t0, CP0_TCCONTEXT
+#endif /* CONFIG_MIPS_MT_SMTC */
 	.set	noat
 	RESTORE_TEMP
 	RESTORE_AT
@@ -120,28 +154,17 @@ syscall_exit_work:
 	jal	do_syscall_trace
 	b	resume_userspace
 
+#if defined(CONFIG_CPU_MIPSR2) || defined(CONFIG_MIPS_MT)
+
 /*
- * Common spurious interrupt handler.
+ * MIPS32R2 Instruction Hazard Barrier - must be called
+ *
+ * For C code use the inline version named instruction_hazard().
  */
-LEAF(spurious_interrupt)
-	/*
-	 * Someone tried to fool us by sending an interrupt but we
-	 * couldn't find a cause for it.
-	 */
-	PTR_LA	t1, irq_err_count
-#ifdef CONFIG_SMP
-1:	ll      t0, (t1)
-	addiu   t0, 1
-	sc      t0, (t1)
-#if R10000_LLSC_WAR
-	beqzl	t0, 1b
-#else
-	beqz	t0, 1b
-#endif
-#else
-	lw      t0, (t1)
-	addiu   t0, 1
-	sw      t0, (t1)
-#endif
-	j	ret_from_irq
-	END(spurious_interrupt)
+LEAF(mips_ihb)
+	.set	mips32r2
+	jr.hb	ra
+	nop
+	END(mips_ihb)
+
+#endif /* CONFIG_CPU_MIPSR2 or CONFIG_MIPS_MT */

arch/mips/kernel/gdb-low.S

@@ -283,11 +283,33 @@
  */
 
 3:
+#ifdef CONFIG_MIPS_MT_SMTC
+		/* Read-modify write of Status must be atomic */
+		mfc0	t2, CP0_TCSTATUS
+		ori	t1, t2, TCSTATUS_IXMT
+		mtc0	t1, CP0_TCSTATUS
+		andi	t2, t2, TCSTATUS_IXMT
+		ehb
+		DMT	9				# dmt	t1
+		jal	mips_ihb
+		nop
+#endif /* CONFIG_MIPS_MT_SMTC */
 		mfc0	t0, CP0_STATUS
 		ori	t0, 0x1f
 		xori	t0, 0x1f
 		mtc0	t0, CP0_STATUS
-
+#ifdef CONFIG_MIPS_MT_SMTC
+        	andi    t1, t1, VPECONTROL_TE
+        	beqz    t1, 9f
+		nop
+        	EMT					# emt
+9:
+		mfc0	t1, CP0_TCSTATUS
+		xori	t1, t1, TCSTATUS_IXMT
+		or	t1, t1, t2
+		mtc0	t1, CP0_TCSTATUS
+		ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 		LONG_L	v0, GDB_FR_STATUS(sp)
 		LONG_L	v1, GDB_FR_EPC(sp)
 		mtc0	v0, CP0_STATUS

arch/mips/kernel/gdb-stub.c

@@ -140,6 +140,7 @@
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
 #include <asm/inst.h>
+#include <asm/smp.h>
 
 /*
  * external low-level support routines
@@ -669,6 +670,64 @@ static void kgdb_wait(void *arg)
 	local_irq_restore(flags);
 }
 
+/*
+ * GDB stub needs to call kgdb_wait on all processor with interrupts
+ * disabled, so it uses it's own special variant.
+ */
+static int kgdb_smp_call_kgdb_wait(void)
+{
+#ifdef CONFIG_SMP
+	struct call_data_struct data;
+	int i, cpus = num_online_cpus() - 1;
+	int cpu = smp_processor_id();
+
+	/*
+	 * Can die spectacularly if this CPU isn't yet marked online
+	 */
+	BUG_ON(!cpu_online(cpu));
+
+	if (!cpus)
+		return 0;
+
+	if (spin_is_locked(&smp_call_lock)) {
+		/*
+		 * Some other processor is trying to make us do something
+		 * but we're not going to respond... give up
+		 */
+		return -1;
+		}
+
+	/*
+	 * We will continue here, accepting the fact that
+	 * the kernel may deadlock if another CPU attempts
+	 * to call smp_call_function now...
+	 */
+
+	data.func = kgdb_wait;
+	data.info = NULL;
+	atomic_set(&data.started, 0);
+	data.wait = 0;
+
+	spin_lock(&smp_call_lock);
+	call_data = &data;
+	mb();
+
+	/* Send a message to all other CPUs and wait for them to respond */
+	for (i = 0; i < NR_CPUS; i++)
+		if (cpu_online(i) && i != cpu)
+			core_send_ipi(i, SMP_CALL_FUNCTION);
+
+	/* Wait for response */
+	/* FIXME: lock-up detection, backtrace on lock-up */
+	while (atomic_read(&data.started) != cpus)
+		barrier();
+
+	call_data = NULL;
+	spin_unlock(&smp_call_lock);
+#endif
+
+	return 0;
+}
 
 /*
  * This function does all command processing for interfacing to gdb.  It
@@ -718,7 +777,7 @@ void handle_exception (struct gdb_regs *regs)
 	/*
 	 * force other cpus to enter kgdb
 	 */
-	smp_call_function(kgdb_wait, NULL, 0, 0);
+	kgdb_smp_call_kgdb_wait();
 
 	/*
 	 * If we're in breakpoint() increment the PC

arch/mips/kernel/genex.S

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 
 #include <asm/asm.h>
+#include <asm/asmmacro.h>
 #include <asm/cacheops.h>
 #include <asm/regdef.h>
 #include <asm/fpregdef.h>
@@ -122,6 +123,20 @@ handle_vcei:
 	.set	pop
 	END(except_vec3_r4000)
 
+	__FINIT
+
+	.align  5
+NESTED(handle_int, PT_SIZE, sp)
+	SAVE_ALL
+	CLI
+
+	PTR_LA	ra, ret_from_irq
+	move	a0, sp
+	j	plat_irq_dispatch
+	END(handle_int)
+
+	__INIT
+
 /*
  * Special interrupt vector for MIPS64 ISA & embedded MIPS processors.
  * This is a dedicated interrupt exception vector which reduces the
@@ -157,6 +172,15 @@ NESTED(except_vec_vi, 0, sp)
 	SAVE_AT
 	.set	push
 	.set	noreorder
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * To keep from blindly blocking *all* interrupts
+	 * during service by SMTC kernel, we also want to
+	 * pass the IM value to be cleared.
+	 */
+EXPORT(except_vec_vi_mori)
+	ori	a0, $0, 0
+#endif /* CONFIG_MIPS_MT_SMTC */
 EXPORT(except_vec_vi_lui)
 	lui	v0, 0		/* Patched */
 	j	except_vec_vi_handler
@@ -173,6 +197,25 @@ EXPORT(except_vec_vi_end)
 NESTED(except_vec_vi_handler, 0, sp)
 	SAVE_TEMP
 	SAVE_STATIC
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * SMTC has an interesting problem that interrupts are level-triggered,
+	 * and the CLI macro will clear EXL, potentially causing a duplicate
+	 * interrupt service invocation. So we need to clear the associated
+	 * IM bit of Status prior to doing CLI, and restore it after the
+	 * service routine has been invoked - we must assume that the
+	 * service routine will have cleared the state, and any active
+	 * level represents a new or otherwised unserviced event...
+	 */
+	mfc0	t1, CP0_STATUS
+	and	t0, a0, t1
+	mfc0	t2, CP0_TCCONTEXT
+	or	t0, t0, t2
+	mtc0	t0, CP0_TCCONTEXT
+	xor	t1, t1, t0
+	mtc0	t1, CP0_STATUS
+	ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	CLI
 	move	a0, sp
 	jalr	v0

arch/mips/kernel/head.S

@@ -18,6 +18,7 @@
 #include <linux/threads.h>
 
 #include <asm/asm.h>
+#include <asm/asmmacro.h>
 #include <asm/regdef.h>
 #include <asm/page.h>
 #include <asm/mipsregs.h>
@@ -82,12 +83,33 @@
 	 */
 	.macro	setup_c0_status set clr
 	.set	push
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * For SMTC, we need to set privilege and disable interrupts only for
+	 * the current TC, using the TCStatus register.
+	 */
+	mfc0	t0, CP0_TCSTATUS
+	/* Fortunately CU 0 is in the same place in both registers */
+	/* Set TCU0, TMX, TKSU (for later inversion) and IXMT */
+	li	t1, ST0_CU0 | 0x08001c00
+	or	t0, t1
+	/* Clear TKSU, leave IXMT */
+	xori	t0, 0x00001800
+	mtc0	t0, CP0_TCSTATUS
+	ehb
+	/* We need to leave the global IE bit set, but clear EXL...*/
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0 | ST0_EXL | ST0_ERL | \set | \clr
+	xor	t0, ST0_EXL | ST0_ERL | \clr
+	mtc0	t0, CP0_STATUS
+#else
 	mfc0	t0, CP0_STATUS
 	or	t0, ST0_CU0|\set|0x1f|\clr
 	xor	t0, 0x1f|\clr
 	mtc0	t0, CP0_STATUS
 	.set	noreorder
 	sll	zero,3				# ehb
+#endif
 	.set	pop
 	.endm
 
@@ -134,6 +156,24 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
 
 	ARC64_TWIDDLE_PC
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * In SMTC kernel, "CLI" is thread-specific, in TCStatus.
+	 * We still need to enable interrupts globally in Status,
+	 * and clear EXL/ERL.
+	 *
+	 * TCContext is used to track interrupt levels under
+	 * service in SMTC kernel. Clear for boot TC before
+	 * allowing any interrupts.
+	 */
+	mtc0	zero, CP0_TCCONTEXT
+
+	mfc0	t0, CP0_STATUS
+	ori	t0, t0, 0xff1f
+	xori	t0, t0, 0x001e
+	mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 	PTR_LA		t0, __bss_start		# clear .bss
 	LONG_S		zero, (t0)
 	PTR_LA		t1, __bss_stop - LONGSIZE
@@ -166,8 +206,25 @@ NESTED(kernel_entry, 16, sp)			# kernel entry point
  * function after setting up the stack and gp registers.
  */
 NESTED(smp_bootstrap, 16, sp)
+#ifdef CONFIG_MIPS_MT_SMTC
+	/*
+	 * Read-modify-writes of Status must be atomic, and this
+	 * is one case where CLI is invoked without EXL being
+	 * necessarily set. The CLI and setup_c0_status will
+	 * in fact be redundant for all but the first TC of
+	 * each VPE being booted.
+	 */
+	DMT	10	# dmt t2 /* t0, t1 are used by CLI and setup_c0_status() */
+	jal	mips_ihb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	setup_c0_status_sec
 	smp_slave_setup
+#ifdef CONFIG_MIPS_MT_SMTC
+	andi	t2, t2, VPECONTROL_TE
+	beqz	t2, 2f
+	EMT		# emt
+2:
+#endif /* CONFIG_MIPS_MT_SMTC */
 	j	start_secondary
 	END(smp_bootstrap)
 #endif /* CONFIG_SMP */

arch/mips/kernel/i8259.c

@@ -187,6 +187,10 @@ void mask_and_ack_8259A(unsigned int irq)
 		outb(cached_21,0x21);
 		outb(0x60+irq,0x20);	/* 'Specific EOI' to master */
 	}
+#ifdef CONFIG_MIPS_MT_SMTC
+        if (irq_hwmask[irq] & ST0_IM)
+        	set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 	spin_unlock_irqrestore(&i8259A_lock, flags);
 	return;
 

arch/mips/kernel/irq-msc01.c

@@ -76,6 +76,11 @@ static void level_mask_and_ack_msc_irq(unsigned int irq)
 	mask_msc_irq(irq);
 	if (!cpu_has_veic)
 		MSCIC_WRITE(MSC01_IC_EOI, 0);
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* This actually needs to be a call into platform code */
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*
@@ -92,6 +97,10 @@ static void edge_mask_and_ack_msc_irq(unsigned int irq)
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r | ~MSC01_IC_SUP_EDGE_BIT);
 		MSCIC_WRITE(MSC01_IC_SUP+irq*8, r);
 	}
+#ifdef CONFIG_MIPS_MT_SMTC
+	if (irq_hwmask[irq] & ST0_IM)
+		set_c0_status(irq_hwmask[irq] & ST0_IM);
+#endif /* CONFIG_MIPS_MT_SMTC */
 }
 
 /*

arch/mips/kernel/irq.c

@@ -38,6 +38,15 @@ void ack_bad_irq(unsigned int irq)
 
 atomic_t irq_err_count;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+/*
+ * SMTC Kernel needs to manipulate low-level CPU interrupt mask
+ * in do_IRQ. These are passed in setup_irq_smtc() and stored
+ * in this table.
+ */
+unsigned long irq_hwmask[NR_IRQS];
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 #undef do_IRQ
 
 /*
@@ -49,6 +58,7 @@ asmlinkage unsigned int do_IRQ(unsigned int irq, struct pt_regs *regs)
 {
 	irq_enter();
 
+	__DO_IRQ_SMTC_HOOK();
 	__do_IRQ(irq, regs);
 
 	irq_exit();
@@ -101,6 +111,11 @@ int show_interrupts(struct seq_file *p, void *v)
 	return 0;
 }
 
+asmlinkage void spurious_interrupt(struct pt_regs *regs)
+{
+	atomic_inc(&irq_err_count);
+}
+
 #ifdef CONFIG_KGDB
 extern void breakpoint(void);
 extern void set_debug_traps(void);
@@ -124,6 +139,9 @@ void __init init_IRQ(void)
 		irq_desc[i].depth   = 1;
 		irq_desc[i].handler = &no_irq_type;
 		spin_lock_init(&irq_desc[i].lock);
+#ifdef CONFIG_MIPS_MT_SMTC
+		irq_hwmask[i] = 0;
+#endif /* CONFIG_MIPS_MT_SMTC */
 	}
 
 	arch_init_irq();

arch/mips/kernel/kspd.c

+/*
+ * Copyright (C) 2005 MIPS Technologies, Inc.  All rights reserved.
+ *
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
+ *
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
+ *
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/unistd.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/syscalls.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/list.h>
+
+#include <asm/vpe.h>
+#include <asm/rtlx.h>
+#include <asm/kspd.h>
+
+static struct workqueue_struct *workqueue = NULL;
+static struct work_struct work;
+
+extern unsigned long cpu_khz;
+
+struct mtsp_syscall {
+	int cmd;
+	unsigned char abi;
+	unsigned char size;
+};
+
+struct mtsp_syscall_ret {
+	int retval;
+	int errno;
+};
+
+struct mtsp_syscall_generic {
+	int arg0;
+	int arg1;
+	int arg2;
+	int arg3;
+	int arg4;
+	int arg5;
+	int arg6;
+};
+
+static struct list_head kspd_notifylist;
+static int sp_stopping = 0;
+
+/* these should match with those in the SDE kit */
+#define MTSP_SYSCALL_BASE	0
+#define MTSP_SYSCALL_EXIT	(MTSP_SYSCALL_BASE + 0)
+#define MTSP_SYSCALL_OPEN	(MTSP_SYSCALL_BASE + 1)
+#define MTSP_SYSCALL_READ	(MTSP_SYSCALL_BASE + 2)
+#define MTSP_SYSCALL_WRITE	(MTSP_SYSCALL_BASE + 3)
+#define MTSP_SYSCALL_CLOSE	(MTSP_SYSCALL_BASE + 4)
+#define MTSP_SYSCALL_LSEEK32	(MTSP_SYSCALL_BASE + 5)
+#define MTSP_SYSCALL_ISATTY	(MTSP_SYSCALL_BASE + 6)
+#define MTSP_SYSCALL_GETTIME	(MTSP_SYSCALL_BASE + 7)
+#define MTSP_SYSCALL_PIPEFREQ	(MTSP_SYSCALL_BASE + 8)
+#define MTSP_SYSCALL_GETTOD	(MTSP_SYSCALL_BASE + 9)
+
+#define MTSP_O_RDONLY		0x0000
+#define MTSP_O_WRONLY		0x0001
+#define MTSP_O_RDWR		0x0002
+#define MTSP_O_NONBLOCK		0x0004
+#define MTSP_O_APPEND		0x0008
+#define MTSP_O_SHLOCK		0x0010
+#define MTSP_O_EXLOCK		0x0020
+#define MTSP_O_ASYNC		0x0040
+#define MTSP_O_FSYNC		O_SYNC
+#define MTSP_O_NOFOLLOW		0x0100
+#define MTSP_O_SYNC		0x0080
+#define MTSP_O_CREAT		0x0200
+#define MTSP_O_TRUNC		0x0400
+#define MTSP_O_EXCL		0x0800
+#define MTSP_O_BINARY		0x8000
+
+#define SP_VPE 1
+
+struct apsp_table  {
+	int sp;
+	int ap;
+};
+
+/* we might want to do the mode flags too */
+struct apsp_table open_flags_table[] = {
+	{ MTSP_O_RDWR, O_RDWR },
+	{ MTSP_O_WRONLY, O_WRONLY },
+	{ MTSP_O_CREAT, O_CREAT },
+	{ MTSP_O_TRUNC, O_TRUNC },
+	{ MTSP_O_NONBLOCK, O_NONBLOCK },
+	{ MTSP_O_APPEND, O_APPEND },
+	{ MTSP_O_NOFOLLOW, O_NOFOLLOW }
+};
+
+struct apsp_table syscall_command_table[] = {
+	{ MTSP_SYSCALL_OPEN, __NR_open },
+	{ MTSP_SYSCALL_CLOSE, __NR_close },
+	{ MTSP_SYSCALL_READ, __NR_read },
+	{ MTSP_SYSCALL_WRITE, __NR_write },
+	{ MTSP_SYSCALL_LSEEK32, __NR_lseek }
+};
+
+static int sp_syscall(int num, int arg0, int arg1, int arg2, int arg3)
+{
+	register long int _num  __asm__ ("$2") = num;
+	register long int _arg0  __asm__ ("$4") = arg0;
+	register long int _arg1  __asm__ ("$5") = arg1;
+	register long int _arg2  __asm__ ("$6") = arg2;
+	register long int _arg3  __asm__ ("$7") = arg3;
+
+	mm_segment_t old_fs;
+
+	old_fs = get_fs();
+ 	set_fs(KERNEL_DS);
+
+  	__asm__ __volatile__ (
+ 	"	syscall					\n"
+ 	: "=r" (_num), "=r" (_arg3)
+ 	: "r" (_num), "r" (_arg0), "r" (_arg1), "r" (_arg2), "r" (_arg3));
+
+	set_fs(old_fs);
+
+	/* $a3 is error flag */
+	if (_arg3)
+		return -_num;
+
+	return _num;
+}
+
+static int translate_syscall_command(int cmd)
+{
+	int i;
+	int ret = -1;
+
+	for (i = 0; i < ARRAY_SIZE(syscall_command_table); i++) {
+		if ((cmd == syscall_command_table[i].sp))
+			return syscall_command_table[i].ap;
+	}
+
+	return ret;
+}
+
+static unsigned int translate_open_flags(int flags)
+{
+	int i;
+	unsigned int ret = 0;
+
+	for (i = 0; i < (sizeof(open_flags_table) / sizeof(struct apsp_table));
+	     i++) {
+		if( (flags & open_flags_table[i].sp) ) {
+			ret |= open_flags_table[i].ap;
+		}
+	}
+
+	return ret;
+}
+
+
+static void sp_setfsuidgid( uid_t uid, gid_t gid)
+{
+	current->fsuid = uid;
+	current->fsgid = gid;
+
+	key_fsuid_changed(current);
+	key_fsgid_changed(current);
+}
+
+/*
+ * Expects a request to be on the sysio channel. Reads it.  Decides whether
+ * its a linux syscall and runs it, or whatever.  Puts the return code back
+ * into the request and sends the whole thing back.
+ */
+void sp_work_handle_request(void)
+{
+	struct mtsp_syscall sc;
+	struct mtsp_syscall_generic generic;
+	struct mtsp_syscall_ret ret;
+	struct kspd_notifications *n;
+	struct timeval tv;
+	struct timezone tz;
+	int cmd;
+
+	char *vcwd;
+	mm_segment_t old_fs;
+	int size;
+
+	ret.retval = -1;
+
+	if (!rtlx_read(RTLX_CHANNEL_SYSIO, &sc, sizeof(struct mtsp_syscall), 0)) {
+		printk(KERN_ERR "Expected request but nothing to read\n");
+		return;
+	}
+
+	size = sc.size;
+
+	if (size) {
+		if (!rtlx_read(RTLX_CHANNEL_SYSIO, &generic, size, 0)) {
+			printk(KERN_ERR "Expected request but nothing to read\n");
+			return;
+		}
+	}
+
+	/* Run the syscall at the priviledge of the user who loaded the
+	   SP program */
+
+	if (vpe_getuid(SP_VPE))
+		sp_setfsuidgid( vpe_getuid(SP_VPE), vpe_getgid(SP_VPE));
+
+	switch (sc.cmd) {
+	/* needs the flags argument translating from SDE kit to
+	   linux */
+ 	case MTSP_SYSCALL_PIPEFREQ:
+ 		ret.retval = cpu_khz * 1000;
+ 		ret.errno = 0;
+ 		break;
+
+ 	case MTSP_SYSCALL_GETTOD:
+ 		memset(&tz, 0, sizeof(tz));
+ 		if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv,
+ 		                             (int)&tz, 0,0)) == 0)
+		ret.retval = tv.tv_sec;
+
+		ret.errno = errno;
+		break;
+
+ 	case MTSP_SYSCALL_EXIT:
+		list_for_each_entry(n, &kspd_notifylist, list)
+ 			n->kspd_sp_exit(SP_VPE);
+		sp_stopping = 1;
+
+		printk(KERN_DEBUG "KSPD got exit syscall from SP exitcode %d\n",
+		       generic.arg0);
+ 		break;
+
+ 	case MTSP_SYSCALL_OPEN:
+ 		generic.arg1 = translate_open_flags(generic.arg1);
+
+ 		vcwd = vpe_getcwd(SP_VPE);
+
+ 		/* change to the cwd of the process that loaded the SP program */
+		old_fs = get_fs();
+		set_fs(KERNEL_DS);
+		sys_chdir(vcwd);
+		set_fs(old_fs);
+
+ 		sc.cmd = __NR_open;
+
+		/* fall through */
+
+  	default:
+ 		if ((sc.cmd >= __NR_Linux) &&
+		    (sc.cmd <= (__NR_Linux +  __NR_Linux_syscalls)) )
+			cmd = sc.cmd;
+		else
+			cmd = translate_syscall_command(sc.cmd);
+
+		if (cmd >= 0) {
+			ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1,
+			                        generic.arg2, generic.arg3);
+			ret.errno = errno;
+		} else
+ 			printk(KERN_WARNING
+			       "KSPD: Unknown SP syscall number %d\n", sc.cmd);
+		break;
+ 	} /* switch */
+
+	if (vpe_getuid(SP_VPE))
+		sp_setfsuidgid( 0, 0);
+
+	if ((rtlx_write(RTLX_CHANNEL_SYSIO, &ret, sizeof(struct mtsp_syscall_ret), 0))
+	    < sizeof(struct mtsp_syscall_ret))
+		printk("KSPD: sp_work_handle_request failed to send to SP\n");
+}
+
+static void sp_cleanup(void)
+{
+	struct files_struct *files = current->files;
+	int i, j;
+	struct fdtable *fdt;
+
+	j = 0;
+
+	/*
+	 * It is safe to dereference the fd table without RCU or
+	 * ->file_lock
+	 */
+	fdt = files_fdtable(files);
+	for (;;) {
+		unsigned long set;
+		i = j * __NFDBITS;
+		if (i >= fdt->max_fdset || i >= fdt->max_fds)
+			break;
+		set = fdt->open_fds->fds_bits[j++];
+		while (set) {
+			if (set & 1) {
+				struct file * file = xchg(&fdt->fd[i], NULL);
+				if (file)
+					filp_close(file, files);
+			}
+			i++;
+			set >>= 1;
+		}
+	}
+}
+
+static int channel_open = 0;
+
+/* the work handler */
+static void sp_work(void *data)
+{
+	if (!channel_open) {
+		if( rtlx_open(RTLX_CHANNEL_SYSIO, 1) != 0) {
+			printk("KSPD: unable to open sp channel\n");
+			sp_stopping = 1;
+		} else {
+			channel_open++;
+			printk(KERN_DEBUG "KSPD: SP channel opened\n");
+		}
+	} else {
+		/* wait for some data, allow it to sleep */
+		rtlx_read_poll(RTLX_CHANNEL_SYSIO, 1);
+
+		/* Check we haven't been woken because we are stopping */
+		if (!sp_stopping)
+			sp_work_handle_request();
+	}
+
+	if (!sp_stopping)
+		queue_work(workqueue, &work);
+	else
+		sp_cleanup();
+}
+
+static void startwork(int vpe)
+{
+	sp_stopping = channel_open = 0;
+
+	if (workqueue == NULL) {
+		if ((workqueue = create_singlethread_workqueue("kspd")) == NULL) {
+			printk(KERN_ERR "unable to start kspd\n");
+			return;
+		}
+
+		INIT_WORK(&work, sp_work, NULL);
+		queue_work(workqueue, &work);
+	} else
+		queue_work(workqueue, &work);
+
+}
+
+static void stopwork(int vpe)
+{
+	sp_stopping = 1;
+
+	printk(KERN_DEBUG "KSPD: SP stopping\n");
+}
+
+void kspd_notify(struct kspd_notifications *notify)
+{
+	list_add(&notify->list, &kspd_notifylist);
+}
+
+static struct vpe_notifications notify;
+static int kspd_module_init(void)
+{
+	INIT_LIST_HEAD(&kspd_notifylist);
+
+	notify.start = startwork;
+	notify.stop = stopwork;
+	vpe_notify(SP_VPE, &notify);
+
+	return 0;
+}
+
+static void kspd_module_exit(void)
+{
+
+}
+
+module_init(kspd_module_init);
+module_exit(kspd_module_exit);
+
+MODULE_DESCRIPTION("MIPS KSPD");
+MODULE_AUTHOR("Elizabeth Oldham, MIPS Technologies, Inc.");
+MODULE_LICENSE("GPL");

arch/mips/kernel/linux32.c

@@ -1182,6 +1182,16 @@ asmlinkage ssize_t sys32_readahead(int fd, u32 pad0, u64 a2, u64 a3,
 	return sys_readahead(fd, merge_64(a2, a3), count);
 }
 
+asmlinkage long sys32_sync_file_range(int fd, int __pad,
+	unsigned long a2, unsigned long a3,
+	unsigned long a4, unsigned long a5,
+	int flags)
+{
+	return sys_sync_file_range(fd,
+			merge_64(a2, a3), merge_64(a4, a5),
+			flags);
+}
+
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned int))
 static unsigned char socketcall_nargs[18]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),

arch/mips/kernel/mips_ksyms.c

@@ -28,21 +28,9 @@ extern long __strnlen_user_asm(const char *s);
 /*
  * String functions
  */
-EXPORT_SYMBOL(memchr);
-EXPORT_SYMBOL(memcmp);
 EXPORT_SYMBOL(memset);
 EXPORT_SYMBOL(memcpy);
 EXPORT_SYMBOL(memmove);
-EXPORT_SYMBOL(strcat);
-EXPORT_SYMBOL(strchr);
-#ifdef CONFIG_64BIT
-EXPORT_SYMBOL(strncmp);
-#endif
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strncat);
-EXPORT_SYMBOL(strnlen);
-EXPORT_SYMBOL(strrchr);
-EXPORT_SYMBOL(strstr);
 
 EXPORT_SYMBOL(kernel_thread);
 
@@ -61,6 +49,3 @@ EXPORT_SYMBOL(__strnlen_user_asm);
 EXPORT_SYMBOL(csum_partial);
 
 EXPORT_SYMBOL(invalid_pte_table);
-#ifdef CONFIG_GENERIC_IRQ_PROBE
-EXPORT_SYMBOL(probe_irq_mask);
-#endif

arch/mips/kernel/process.c

@@ -41,6 +41,10 @@
 #include <asm/elf.h>
 #include <asm/isadep.h>
 #include <asm/inst.h>
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+extern void smtc_idle_loop_hook(void);
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 /*
  * The idle thread. There's no useful work to be done, so just try to conserve
@@ -51,9 +55,13 @@ ATTRIB_NORET void cpu_idle(void)
 {
 	/* endless idle loop with no priority at all */
 	while (1) {
-		while (!need_resched())
+		while (!need_resched()) {
+#ifdef CONFIG_MIPS_MT_SMTC
+			smtc_idle_loop_hook();
+#endif /* CONFIG_MIPS_MT_SMTC */
 			if (cpu_wait)
 				(*cpu_wait)();
+		}
 		preempt_enable_no_resched();
 		schedule();
 		preempt_disable();
@@ -177,6 +185,17 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
 	childregs->cp0_status &= ~(ST0_CU2|ST0_CU1);
 	clear_tsk_thread_flag(p, TIF_USEDFPU);
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/*
+	 * FPU affinity support is cleaner if we track the
+	 * user-visible CPU affinity from the very beginning.
+	 * The generic cpus_allowed mask will already have
+	 * been copied from the parent before copy_thread
+	 * is invoked.
+	 */
+	p->thread.user_cpus_allowed = p->cpus_allowed;
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	if (clone_flags & CLONE_SETTLS)
 		ti->tp_value = regs->regs[7];
 

arch/mips/kernel/ptrace.c

@@ -248,10 +248,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 			break;
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+			unsigned int irqflags;
+			unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 			if (!cpu_has_fpu)
 				break;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+			/* Read-modify-write of Status must be atomic */
+			local_irq_save(irqflags);
+			mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 			preempt_disable();
 			if (cpu_has_mipsmt) {
 				unsigned int vpflags = dvpe();
@@ -266,6 +276,10 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
 				write_c0_status(flags);
 			}
+#ifdef CONFIG_MIPS_MT_SMTC
+			emt(mtflags);
+			local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
 			preempt_enable();
 			break;
 		}

arch/mips/kernel/ptrace32.c

@@ -173,12 +173,22 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 			break;
 		case FPC_EIR: {	/* implementation / version register */
 			unsigned int flags;
+#ifdef CONFIG_MIPS_MT_SMTC
+			unsigned int irqflags;
+			unsigned int mtflags;
+#endif /* CONFIG_MIPS_MT_SMTC */
 
 			if (!cpu_has_fpu) {
 				tmp = 0;
 				break;
 			}
 
+#ifdef CONFIG_MIPS_MT_SMTC
+			/* Read-modify-write of Status must be atomic */
+			local_irq_save(irqflags);
+			mtflags = dmt();
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 			preempt_disable();
 			if (cpu_has_mipsmt) {
 				unsigned int vpflags = dvpe();
@@ -193,6 +203,10 @@ asmlinkage int sys32_ptrace(int request, int pid, int addr, int data)
 				__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
 				write_c0_status(flags);
 			}
+#ifdef CONFIG_MIPS_MT_SMTC
+			emt(mtflags);
+			local_irq_restore(irqflags);
+#endif /* CONFIG_MIPS_MT_SMTC */
 			preempt_enable();
 			break;
 		}

arch/mips/kernel/r4k_switch.S

@@ -88,7 +88,18 @@
 
 	PTR_ADDIU	t0, $28, _THREAD_SIZE - 32
 	set_saved_sp	t0, t1, t2
-
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Read-modify-writes of Status must be atomic on a VPE */
+	mfc0	t2, CP0_TCSTATUS
+	ori	t1, t2, TCSTATUS_IXMT
+	mtc0	t1, CP0_TCSTATUS
+	andi	t2, t2, TCSTATUS_IXMT
+	ehb
+	DMT	8				# dmt	t0
+	move	t1,ra
+	jal	mips_ihb
+	move	ra,t1
+#endif /* CONFIG_MIPS_MT_SMTC */
 	mfc0	t1, CP0_STATUS		/* Do we really need this? */
 	li	a3, 0xff01
 	and	t1, a3
@@ -97,6 +108,18 @@
 	and	a2, a3
 	or	a2, t1
 	mtc0	a2, CP0_STATUS
+#ifdef CONFIG_MIPS_MT_SMTC
+	ehb
+	andi	t0, t0, VPECONTROL_TE
+	beqz	t0, 1f
+	emt
+1:
+	mfc0	t1, CP0_TCSTATUS
+	xori	t1, t1, TCSTATUS_IXMT
+	or	t1, t1, t2
+	mtc0	t1, CP0_TCSTATUS
+	ehb
+#endif /* CONFIG_MIPS_MT_SMTC */
 	move	v0, a0
 	jr	ra
 	END(resume)
@@ -131,10 +154,19 @@ LEAF(_restore_fp)
 #define FPU_DEFAULT  0x00000000
 
 LEAF(_init_fpu)
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Rather than manipulate per-VPE Status, set per-TC bit in TCStatus */
+	mfc0	t0, CP0_TCSTATUS
+	/* Bit position is the same for Status, TCStatus */
+	li	t1, ST0_CU1
+	or	t0, t1
+	mtc0	t0, CP0_TCSTATUS
+#else /* Normal MIPS CU1 enable */
 	mfc0	t0, CP0_STATUS
 	li	t1, ST0_CU1
 	or	t0, t1
 	mtc0	t0, CP0_STATUS
+#endif /* CONFIG_MIPS_MT_SMTC */
 	fpu_enable_hazard
 
 	li	t1, FPU_DEFAULT

arch/mips/kernel/scall32-o32.S

@@ -569,8 +569,19 @@ einval:	li	v0, -EINVAL
 	sys	sys_tkill		2
 	sys	sys_sendfile64		5
 	sys	sys_futex		6
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/*
+	 * For FPU affinity scheduling on MIPS MT processors, we need to
+	 * intercept sys_sched_xxxaffinity() calls until we get a proper hook
+	 * in kernel/sched.c.  Considered only temporary we only support these
+	 * hooks for the 32-bit kernel - there is no MIPS64 MT processor atm.
+	 */
+	sys	mipsmt_sys_sched_setaffinity	3
+	sys	mipsmt_sys_sched_getaffinity	3
+#else
 	sys	sys_sched_setaffinity	3
 	sys	sys_sched_getaffinity	3	/* 4240 */
+#endif /* CONFIG_MIPS_MT_FPAFF */
 	sys	sys_io_setup		2
 	sys	sys_io_destroy		1
 	sys	sys_io_getevents	5
@@ -634,6 +645,8 @@ einval:	li	v0, -EINVAL
 	sys	sys_pselect6		6
 	sys	sys_ppoll		5
 	sys	sys_unshare		1
+	sys	sys_splice		4
+	sys	sys_sync_file_range	7	/* 4305 */
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to

arch/mips/kernel/scall64-64.S

@@ -460,3 +460,5 @@ sys_call_table:
 	PTR	sys_pselect6			/* 5260 */
 	PTR	sys_ppoll
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range

arch/mips/kernel/scall64-n32.S

@@ -386,3 +386,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_pselect6
 	PTR	sys_ppoll			/* 6265 */
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys_sync_file_range

arch/mips/kernel/scall64-o32.S

@@ -508,4 +508,6 @@ sys_call_table:
 	PTR	sys_pselect6
 	PTR	sys_ppoll
 	PTR	sys_unshare
+	PTR	sys_splice
+	PTR	sys32_sync_file_range		/* 4305 */
 	.size	sys_call_table,.-sys_call_table

arch/mips/kernel/setup.c

@@ -529,7 +529,10 @@ void __init setup_arch(char **cmdline_p)
 
 int __init fpu_disable(char *s)
 {
-	cpu_data[0].options &= ~MIPS_CPU_FPU;
+	int i;
+
+	for (i = 0; i < NR_CPUS; i++)
+		cpu_data[i].options &= ~MIPS_CPU_FPU;
 
 	return 1;
 }

arch/mips/kernel/smp_mt.c → arch/mips/kernel/smp-mt.c

 /*
- * Copyright (C) 2004, 2005 MIPS Technologies, Inc.  All rights reserved.
- *
- *  Elizabeth Clarke (beth@mips.com)
- *
  *  This program is free software; you can distribute it and/or modify it
  *  under the terms of the GNU General Public License (Version 2) as
  *  published by the Free Software Foundation.
@@ -16,6 +12,10 @@
  *  with this program; if not, write to the Free Software Foundation, Inc.,
  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
+ * Copyright (C) 2004, 05, 06 MIPS Technologies, Inc.
+ *    Elizabeth Clarke (beth@mips.com)
+ *    Ralf Baechle (ralf@linux-mips.org)
+ * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org)
  */
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -24,6 +24,7 @@
 #include <linux/compiler.h>
 
 #include <asm/atomic.h>
+#include <asm/cacheflush.h>
 #include <asm/cpu.h>
 #include <asm/processor.h>
 #include <asm/system.h>
@@ -33,8 +34,8 @@
 #include <asm/time.h>
 #include <asm/mipsregs.h>
 #include <asm/mipsmtregs.h>
-#include <asm/cacheflush.h>
-#include <asm/mips-boards/maltaint.h>
+#include <asm/mips_mt.h>
+#include <asm/mips-boards/maltaint.h>  /* This is f*cking wrong */
 
 #define MIPS_CPU_IPI_RESCHED_IRQ 0
 #define MIPS_CPU_IPI_CALL_IRQ 1
@@ -66,6 +67,7 @@ void __init sanitize_tlb_entries(void)
 	if (!cpu_has_mipsmt)
 		return;
 
+	/* Enable VPC */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
 	back_to_back_c0_hazard();
@@ -106,12 +108,12 @@ void __init sanitize_tlb_entries(void)
 
 static void ipi_resched_dispatch (struct pt_regs *regs)
 {
-	do_IRQ(MIPS_CPU_IPI_RESCHED_IRQ, regs);
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ, regs);
 }
 
 static void ipi_call_dispatch (struct pt_regs *regs)
 {
-	do_IRQ(MIPS_CPU_IPI_CALL_IRQ, regs);
+	do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ, regs);
 }
 
 irqreturn_t ipi_resched_interrupt(int irq, void *dev_id, struct pt_regs *regs)
@@ -148,6 +150,11 @@ void plat_smp_setup(void)
 	unsigned long val;
 	int i, num;
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(0, mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
 	if (!cpu_has_mipsmt)
 		return;
 
@@ -155,6 +162,8 @@ void plat_smp_setup(void)
 	dvpe();
 	dmt();
 
+	mips_mt_set_cpuoptions();
+
 	/* Put MVPE's into 'configuration state' */
 	set_c0_mvpcontrol(MVPCONTROL_VPC);
 
@@ -189,11 +198,13 @@ void plat_smp_setup(void)
 
 			if (i != 0) {
 				write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0);
-				write_vpe_c0_cause(read_vpe_c0_cause() & ~CAUSEF_IP);
 
 				/* set config to be the same as vpe0, particularly kseg0 coherency alg */
 				write_vpe_c0_config( read_c0_config());
 
+				/* make sure there are no software interrupts pending */
+				write_vpe_c0_cause(read_vpe_c0_cause() & ~(C_SW1|C_SW0));
+
 				/* Propagate Config7 */
 				write_vpe_c0_config7(read_c0_config7());
 			}
@@ -233,16 +244,16 @@ void plat_smp_setup(void)
 	/* We'll wait until starting the secondaries before starting MVPE */
 
 	printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
+}
 
+void __init plat_prepare_cpus(unsigned int max_cpus)
+{
 	/* set up ipi interrupts */
 	if (cpu_has_vint) {
 		set_vi_handler (MIPS_CPU_IPI_RESCHED_IRQ, ipi_resched_dispatch);
 		set_vi_handler (MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
 	}
-}
 
-void __init plat_prepare_cpus(unsigned int max_cpus)
-{
 	cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
 	cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
 
@@ -287,7 +298,8 @@ void prom_boot_secondary(int cpu, struct task_struct *idle)
 	/* global pointer */
 	write_tc_gpr_gp((unsigned long)gp);
 
-	flush_icache_range((unsigned long)gp, (unsigned long)(gp + 1));
+	flush_icache_range((unsigned long)gp,
+	                   (unsigned long)(gp + sizeof(struct thread_info)));
 
 	/* finally out of configuration and into chaos */
 	clear_c0_mvpcontrol(MVPCONTROL_VPC);
@@ -305,6 +317,12 @@ void prom_smp_finish(void)
 {
 	write_c0_compare(read_c0_count() + (8* mips_hpt_frequency/HZ));
 
+#ifdef CONFIG_MIPS_MT_FPAFF
+	/* If we have an FPU, enroll ourselves in the FPU-full mask */
+	if (cpu_has_fpu)
+		cpu_set(smp_processor_id(), mt_fpu_cpumask);
+#endif /* CONFIG_MIPS_MT_FPAFF */
+
 	local_irq_enable();
 }
 

arch/mips/kernel/smp.c

@@ -38,6 +38,10 @@
 #include <asm/mmu_context.h>
 #include <asm/smp.h>
 
+#ifdef CONFIG_MIPS_MT_SMTC
+#include <asm/mipsmtregs.h>
+#endif /* CONFIG_MIPS_MT_SMTC */
+
 cpumask_t phys_cpu_present_map;		/* Bitmask of available CPUs */
 volatile cpumask_t cpu_callin_map;	/* Bitmask of started secondaries */
 cpumask_t cpu_online_map;		/* Bitmask of currently online CPUs */
@@ -85,6 +89,10 @@ asmlinkage void start_secondary(void)
 {
 	unsigned int cpu;
 
+#ifdef CONFIG_MIPS_MT_SMTC
+	/* Only do cpu_probe for first TC of CPU */
+	if ((read_c0_tcbind() & TCBIND_CURTC) == 0)
+#endif /* CONFIG_MIPS_MT_SMTC */
 	cpu_probe();
 	cpu_report();
 	per_cpu_trap_init();
@@ -179,11 +187,13 @@ int smp_call_function (void (*func) (void *info), void *info, int retry,
 	if (wait)
 		while (atomic_read(&data.finished) != cpus)
 			barrier();
+	call_data = NULL;
 	spin_unlock(&smp_call_lock);
 
 	return 0;
 }
 
+
 void smp_call_function_interrupt(void)
 {
 	void (*func) (void *info) = call_data->func;
@@ -446,5 +456,3 @@ subsys_initcall(topology_init);
 
 EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(flush_tlb_one);
-EXPORT_SYMBOL(cpu_data);
-EXPORT_SYMBOL(synchronize_irq);

arch/mips/kernel/smtc-asm.S

+/*
+ * Assembly Language Functions for MIPS MT SMTC support
+ */
+
+/*
+ * This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set. */
+
+#include <asm/regdef.h>
+#include <asm/asmmacro.h>
+#include <asm/stackframe.h>
+#include <asm/stackframe.h>
+
+/*
+ * "Software Interrupt" linkage.
+ *
+ * This is invoked when an "Interrupt" is sent from one TC to another,
+ * where the TC to be interrupted is halted, has it's Restart address
+ * and Status values saved by the "remote control" thread, then modified
+ * to cause execution to begin here, in kenel mode. This code then
+ * disguises the TC state as that of an exception and transfers
+ * control to the general exception or vectored interrupt handler.
+ */
+	.set noreorder
+
+/*
+The __smtc_ipi_vector would use k0 and k1 as temporaries and
+1) Set EXL (this is per-VPE, so this can't be done by proxy!)
+2) Restore the K/CU and IXMT bits to the pre "exception" state
+   (EXL means no interrupts and access to the kernel map).
+3) Set EPC to be the saved value of TCRestart.
+4) Jump to the exception handler entry point passed by the sender.
+
+CAN WE PROVE THAT WE WON'T DO THIS IF INTS DISABLED??
+*/
+
+/*
+ * Reviled and slandered vision: Set EXL and restore K/CU/IXMT
+ * state of pre-halt thread, then save everything and call
+ * thought some function pointer to imaginary_exception, which
+ * will parse a register value or memory message queue to
+ * deliver things like interprocessor interrupts. On return
+ * from that function, jump to the global ret_from_irq code
+ * to invoke the scheduler and return as appropriate.
+ */
+
+#define PT_PADSLOT4 (PT_R0-8)
+#define PT_PADSLOT5 (PT_R0-4)
+
+	.text
+	.align 5
+FEXPORT(__smtc_ipi_vector)
+	.set	noat
+	/* Disable thread scheduling to make Status update atomic */
+	DMT	27					# dmt	k1
+	ehb
+	/* Set EXL */
+	mfc0	k0,CP0_STATUS
+	ori	k0,k0,ST0_EXL
+	mtc0	k0,CP0_STATUS
+	ehb
+	/* Thread scheduling now inhibited by EXL. Restore TE state. */
+	andi	k1,k1,VPECONTROL_TE
+	beqz	k1,1f
+	emt
+1:
+	/*
+	 * The IPI sender has put some information on the anticipated
+	 * kernel stack frame.  If we were in user mode, this will be
+	 * built above the saved kernel SP.  If we were already in the
+	 * kernel, it will be built above the current CPU SP.
+	 *
+	 * Were we in kernel mode, as indicated by CU0?
+	 */
+	sll	k1,k0,3
+	.set noreorder
+	bltz	k1,2f
+	move	k1,sp
+	.set reorder
+	/*
+	 * If previously in user mode, set CU0 and use kernel stack.
+	 */
+	li	k1,ST0_CU0
+	or	k1,k1,k0
+	mtc0	k1,CP0_STATUS
+	ehb
+	get_saved_sp
+	/* Interrupting TC will have pre-set values in slots in the new frame */
+2:	subu	k1,k1,PT_SIZE
+	/* Load TCStatus Value */
+	lw	k0,PT_TCSTATUS(k1)
+	/* Write it to TCStatus to restore CU/KSU/IXMT state */
+	mtc0	k0,$2,1
+	ehb
+	lw	k0,PT_EPC(k1)
+	mtc0	k0,CP0_EPC
+	/* Save all will redundantly recompute the SP, but use it for now */
+	SAVE_ALL
+	CLI
+	move	a0,sp
+	/* Function to be invoked passed stack pad slot 5 */
+	lw	t0,PT_PADSLOT5(sp)
+	/* Argument from sender passed in stack pad slot 4 */
+	lw	a1,PT_PADSLOT4(sp)
+	jalr	t0
+	nop
+	j	ret_from_irq
+	nop
+
+/*
+ * Called from idle loop to provoke processing of queued IPIs
+ * First IPI message in queue passed as argument.
+ */
+
+LEAF(self_ipi)
+	/* Before anything else, block interrupts */
+	mfc0	t0,CP0_TCSTATUS
+	ori	t1,t0,TCSTATUS_IXMT
+	mtc0	t1,CP0_TCSTATUS
+	ehb
+	/* We know we're in kernel mode, so prepare stack frame */
+	subu	t1,sp,PT_SIZE
+	sw	ra,PT_EPC(t1)
+	sw	a0,PT_PADSLOT4(t1)
+	la	t2,ipi_decode
+	sw	t2,PT_PADSLOT5(t1)
+	/* Save pre-disable value of TCStatus */
+	sw	t0,PT_TCSTATUS(t1)
+	j	__smtc_ipi_vector
+	nop
+END(self_ipi)

arch/mips/kernel/time.c

@@ -116,8 +116,7 @@ static void c0_timer_ack(void)
 	write_c0_compare(expirelo);
 
 	/* Check to see if we have missed any timer interrupts.  */
-	count = read_c0_count();
-	if ((count - expirelo) < 0x7fffffff) {
+	while (((count = read_c0_count()) - expirelo) < 0x7fffffff) {
 		/* missed_timer_count++; */
 		expirelo = count + cycles_per_jiffy;
 		write_c0_compare(expirelo);

arch/mips/kernel/vmlinux.lds.S

@@ -2,7 +2,7 @@
 #include <asm/asm-offsets.h>
 #include <asm-generic/vmlinux.lds.h>
 
-#undef mips		/* CPP really sucks for this job  */
+#undef mips
 #define mips mips
 OUTPUT_ARCH(mips)
 ENTRY(kernel_entry)

arch/mips/lasat/Makefile

@@ -3,7 +3,7 @@
 #
 
 obj-y	 			+= reset.o setup.o prom.o lasat_board.o \
-				   at93c.o interrupt.o lasatIRQ.o
+				   at93c.o interrupt.o
 
 obj-$(CONFIG_LASAT_SYSCTL)	+= sysctl.o
 obj-$(CONFIG_DS1603)		+= ds1603.o

arch/mips/lasat/interrupt.c

@@ -27,14 +27,13 @@
 #include <asm/bootinfo.h>
 #include <asm/irq.h>
 #include <asm/lasat/lasatint.h>
+#include <asm/time.h>
 #include <asm/gdb-stub.h>
 
 static volatile int *lasat_int_status = NULL;
 static volatile int *lasat_int_mask = NULL;
 static volatile int lasat_int_mask_shift;
 
-extern asmlinkage void lasatIRQ(void);
-
 void disable_lasat_irq(unsigned int irq_nr)
 {
 	unsigned long flags;
@@ -109,11 +108,17 @@ static unsigned long get_int_status_200(void)
 	return int_status;
 }
 
-void lasat_hw0_irqdispatch(struct pt_regs *regs)
+asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 {
 	unsigned long int_status;
+	unsigned int cause = read_c0_cause();
 	int irq;
 
+	if (cause & CAUSEF_IP7) {	/* R4000 count / compare IRQ */
+		ll_timer_interrupt(7, regs);
+		return;
+	}
+
 	int_status = get_int_status();
 
 	/* if int_status == 0, then the interrupt has already been cleared */
@@ -147,9 +152,6 @@ void __init arch_init_irq(void)
 		panic("arch_init_irq: mips_machtype incorrect");
 	}
 
-	/* Now safe to set the exception vector. */
-	set_except_vector(0, lasatIRQ);
-
 	for (i = 0; i <= LASATINT_END; i++) {
 		irq_desc[i].status	= IRQ_DISABLED;
 		irq_desc[i].action	= 0;

arch/mips/mips-boards/generic/Makefile

@@ -18,8 +18,8 @@
 # Makefile for the MIPS boards generic routines under Linux.
 #
 
-obj-y				:= mipsIRQ.o reset.o display.o init.o memory.o \
-				   printf.o cmdline.o time.o
+obj-y				:= reset.o display.o init.o memory.o printf.o \
+				   cmdline.o time.o
 obj-$(CONFIG_PCI)		+= pci.o
 obj-$(CONFIG_KGDB)		+= gdb_hook.o
 

arch/mips/mips-boards/generic/gdb_hook.c

@@ -25,7 +25,7 @@
 #include <asm/serial.h>
 #include <asm/io.h>
 
-static struct serial_state rs_table[RS_TABLE_SIZE] = {
+static struct serial_state rs_table[] = {
 	SERIAL_PORT_DFNS	/* Defined in serial.h */
 };