i2c: at91: use dma safe buffers

The supplied buffer might be on the stack and we get the following error
message:
[    3.312058] at91_i2c e0070600.i2c: rejecting DMA map of vmalloc memory

Use i2c_{get,put}_dma_safe_msg_buf() to get a DMA-able memory region if
necessary.

Fixes: 60937b2c ("i2c: at91: add dma support")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

drivers/i2c/busses/i2c-at91-master.c

@@ -656,6 +656,7 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	unsigned int_addr_flag = 0;
 	struct i2c_msg *m_start = msg;
 	bool is_read;
+	u8 *dma_buf;
 
 	dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
 
@@ -703,7 +704,17 @@ static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
 	dev->msg = m_start;
 	dev->recv_len_abort = false;
 
+	if (dev->use_dma) {
+		dma_buf = i2c_get_dma_safe_msg_buf(m_start, 1);
+		if (!dma_buf) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		dev->buf = dma_buf;
+	}
+
 	ret = at91_do_twi_transfer(dev);
+	i2c_put_dma_safe_msg_buf(dma_buf, m_start, !ret);
 
 	ret = (ret < 0) ? ret : num;
 out: