Commit 0432e833 authored by Holger Hoffstätte's avatar Holger Hoffstätte Committed by David S. Miller

net: phy: realtek: fix RTL8201F sysfs name

Since 4.19 the following error in sysfs has appeared when using the
r8169 NIC driver:

$cd /sys/module/realtek/drivers
$ls -l
ls: cannot access 'mdio_bus:RTL8201F 10/100Mbps Ethernet': No such file or directory
[..garbled dir entries follow..]

Apparently the forward slash in "10/100Mbps Ethernet" is interpreted
as directory separator that leads nowhere, and was introduced in commit
513588dd ("net: phy: realtek: add RTL8201F phy-id and functions").

Fix this by removing the offending slash in the driver name.

Other drivers in net/phy seem to have the same problem, but I cannot
test/verify them.

Fixes: 513588dd ("net: phy: realtek: add RTL8201F phy-id and functions")
Signed-off-by: default avatarHolger Hoffstätte <holger@applied-asynchrony.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 12480e3b
......@@ -220,7 +220,7 @@ static struct phy_driver realtek_drvs[] = {
.flags = PHY_HAS_INTERRUPT,
}, {
.phy_id = 0x001cc816,
.name = "RTL8201F 10/100Mbps Ethernet",
.name = "RTL8201F Fast Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment