Merge branch 'fixes-non-critical' of...

Merge branch 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical

* 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  OMAP4: dma: Correct CPU version check for dma_common_ch_end
  ARM: OMAP: Fix section mismatch warning for platform_cpu_die()
  ARM: OMAP: fix section mismatch warning for omap4_hotplug_cpu()
  ARM: OMAP: convert omap_device_build() and callers to __init
  ARM: OMAP2+: Mark omap_hsmmc_init and omap_mux related functions as __init
  ARM: OMAP2+: Fix multiple randconfig errors with SOC_OMAP and SOC_OMAP_NOOP
  ARM: OMAP: Fix devexit for dma when CONFIG_HOTPLUG is not set
  ARM: OMAP2+: Fix devexit for smartreflex when CONFIG_HOTPLUG is not set
  ARM: OMAP2+: Fix zoom LCD backlight if TWL_CORE is not selected
  ARM: OMAP2+: Fix board_mux section type conflict when OMAP_MUX is not set
  ARM: OMAP2+: Fix OMAP_HDQ_BASE build error
  ARM: OMAP2+: Fix Kconfig dependencies for USB_ARCH_HAS_EHCI
  ARM: OMAP2+: I2C: always compile I2C reset code, even if I2C driver is not built
  ARM: OMAP2+: Split omap2_hsmmc_init() to properly support I2C GPIO pins
  ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}
  ARM: OMAP: Fix build error when mmc_omap is built as module
  ARM: OMAP: Fix kernel panic with HSMMC when twl4030_gpio is a module

arch/arm/Makefile

@@ -164,9 +164,7 @@ machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_OMAP1)		:= omap1
-machine-$(CONFIG_ARCH_OMAP2)		:= omap2
-machine-$(CONFIG_ARCH_OMAP3)		:= omap2
-machine-$(CONFIG_ARCH_OMAP4)		:= omap2
+machine-$(CONFIG_ARCH_OMAP2PLUS)	:= omap2
 machine-$(CONFIG_ARCH_ORION5X)		:= orion5x
 machine-$(CONFIG_ARCH_PICOXCELL)	:= picoxcell
 machine-$(CONFIG_ARCH_PNX4008)		:= pnx4008

arch/arm/mach-omap2/Kconfig

@@ -21,27 +21,21 @@ config ARCH_OMAP2PLUS_TYPICAL
 	  Compile a kernel suitable for booting most boards
 
 config ARCH_OMAP2
-	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
-	default y
+	bool
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP3
-	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
-	default y
+	bool
 	select CPU_V7
-	select USB_ARCH_HAS_EHCI
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
 	select ARM_CPU_SUSPEND if PM
 	select MULTI_IRQ_HANDLER
 
 config ARCH_OMAP4
-	bool "TI OMAP4"
-	default y
-	depends on ARCH_OMAP2PLUS
+	bool
 	select CACHE_L2X0
 	select CPU_V7
 	select ARM_GIC
@@ -52,40 +46,62 @@ config ARCH_OMAP4
 	select ARM_ERRATA_720789
 	select ARCH_HAS_OPP
 	select PM_OPP if PM
-	select USB_ARCH_HAS_EHCI
+	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
-	depends on ARCH_OMAP2
+
+config SOC_OMAP
+	bool
 
 config SOC_OMAP2420
 	bool "OMAP2420 support"
-	depends on ARCH_OMAP2
 	default y
+	select SOC_OMAP
+	select ARCH_OMAP2
 	select OMAP_DM_TIMER
 	select ARCH_OMAP_OTG
 
 config SOC_OMAP2430
 	bool "OMAP2430 support"
-	depends on ARCH_OMAP2
 	default y
+	select SOC_OMAP
+	select ARCH_OMAP2
 	select ARCH_OMAP_OTG
 
 config SOC_OMAP3430
 	bool "OMAP3430 support"
-	depends on ARCH_OMAP3
 	default y
+	select SOC_OMAP
+	select ARCH_OMAP3
 	select ARCH_OMAP_OTG
 
 config SOC_OMAPTI81XX
 	bool "TI81XX support"
-	depends on ARCH_OMAP3
 	default y
+	select SOC_OMAP
+	select ARCH_OMAP3
 
 config SOC_OMAPAM33XX
 	bool "AM33XX support"
-	depends on ARCH_OMAP3
 	default y
+	select SOC_OMAP
+	select ARCH_OMAP3
+
+config SOC_OMAP44XX
+	bool "OMAP44XX support"
+	default y
+	select SOC_OMAP
+	select ARCH_OMAP4
+
+config SOC_OMAP_NOOP
+	bool
+	depends on !SOC_OMAP
+	default y
+	select ARCH_OMAP2
+	select ARCH_OMAP3
+	select ARCH_OMAP4
+	select MACH_OMAP_GENERIC
 
 config OMAP_PACKAGE_ZAF
        bool
@@ -112,17 +128,17 @@ config OMAP_PACKAGE_CBS
        bool
 
 comment "OMAP Board Type"
-	depends on ARCH_OMAP2PLUS
 
 config MACH_OMAP_GENERIC
 	bool "Generic OMAP2+ board"
-	depends on ARCH_OMAP2PLUS
 	select USE_OF
 	default y
 	help
 	  Support for generic TI OMAP2+ boards using Flattened Device Tree.
 	  More information at Documentation/devicetree
 
+if SOC_OMAP
+
 config MACH_OMAP2_TUSB6010
 	bool
 	depends on ARCH_OMAP2 && SOC_OMAP2420
@@ -343,6 +359,7 @@ config MACH_OMAP4_PANDA
 	select OMAP_PACKAGE_CBS
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
+endif
 config OMAP3_EMU
 	bool "OMAP3 debugging peripherals"
 	depends on ARCH_OMAP3

arch/arm/mach-omap2/Makefile

@@ -4,7 +4,7 @@
 
 # Common support
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
-	 common.o gpio.o dma.o wd_timer.o display.o
+	 common.o gpio.o dma.o wd_timer.o display.o i2c.o
 
 omap-2-3-common				= irq.o sdrc.o
 hwmod-common				= omap_hwmod.o \
@@ -182,9 +182,6 @@ obj-$(CONFIG_OMAP_IOMMU)		+= iommu2.o
 iommu-$(CONFIG_OMAP_IOMMU)		:= omap-iommu.o
 obj-y					+= $(iommu-m) $(iommu-y)
 
-i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
-obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
-
 ifneq ($(CONFIG_TIDSPBRIDGE),)
 obj-y					+= dsp.o
 endif

arch/arm/mach-omap2/board-2430sdp.c

@@ -279,7 +279,7 @@ static void __init omap_2430sdp_init(void)
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
 	omap_serial_init();
 	omap_sdrc_init(NULL, NULL);
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 	omap2_usbfs_init(&sdp2430_usb_config);
 
 	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);

arch/arm/mach-omap2/board-3430sdp.c

@@ -232,11 +232,13 @@ static struct omap2_hsmmc_info mmc[] = {
 		 */
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 4,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 7,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -249,7 +251,7 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 	 */
 	mmc[0].gpio_cd = gpio + 0;
 	mmc[1].gpio_cd = gpio + 1;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
 	gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
@@ -606,6 +608,7 @@ static void __init omap_3430sdp_init(void)
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_board_config = sdp3430_config;
 	omap_board_config_size = ARRAY_SIZE(sdp3430_config);
+	omap_hsmmc_init(mmc);
 	omap3430_i2c_init();
 	omap_display_init(&sdp3430_dss_data);
 	if (omap_rev() > OMAP3430_REV_ES1_0)

arch/arm/mach-omap2/board-4430sdp.c

@@ -491,9 +491,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	struct omap2_hsmmc_info *c;
 
-	omap2_hsmmc_init(controllers);
+	omap_hsmmc_init(controllers);
 	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(c->dev);
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 
 	return 0;
 }

arch/arm/mach-omap2/board-am3517evm.c

@@ -504,7 +504,7 @@ static void __init am3517_evm_init(void)
 	am3517_evm_musb_init();
 
 	/* MMC init function */
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 }
 
 MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")

arch/arm/mach-omap2/board-cm-t35.c

@@ -413,7 +413,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
-
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
@@ -471,7 +471,7 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	return 0;
 }
@@ -639,6 +639,7 @@ static void __init cm_t3x_common_init(void)
 	omap_serial_init();
 	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
+	omap_hsmmc_init(mmc);
 	cm_t35_init_i2c();
 	omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL);
 	cm_t35_init_ethernet();

arch/arm/mach-omap2/board-devkit8000.c

@@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -228,7 +229,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -636,6 +637,7 @@ static void __init devkit8000_init(void)
 
 	omap_dm9000_init();
 
+	omap_hsmmc_init(mmc);
 	devkit8000_i2c_init();
 	platform_add_devices(devkit8000_devices,
 			ARRAY_SIZE(devkit8000_devices));

arch/arm/mach-omap2/board-flash.c

@@ -189,7 +189,7 @@ static u8 get_gpmc0_type(void)
  *
  * @return - void.
  */
-void board_flash_init(struct flash_partitions partition_info[],
+void __init board_flash_init(struct flash_partitions partition_info[],
 			char chip_sel_board[][GPMC_CS_NUM], int nand_type)
 {
 	u8		cs = 0;

arch/arm/mach-omap2/board-igep0020.c

@@ -295,6 +295,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= -EINVAL,
+		.deferred	= true,
 	},
 #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)
 	{
@@ -402,7 +403,7 @@ static int igep_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
 #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE)
@@ -639,6 +640,9 @@ static void __init igep_init(void)
 
 	/* Get IGEP2 hardware revision */
 	igep2_get_revision();
+
+	omap_hsmmc_init(mmc);
+
 	/* Register I2C busses and drivers */
 	igep_i2c_init();
 	platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices));

arch/arm/mach-omap2/board-ldp.c

@@ -424,7 +424,7 @@ static void __init omap_ldp_init(void)
 	board_nand_init(ldp_nand_partitions,
 		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
 
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 	ldp_display_init();
 }
 

arch/arm/mach-omap2/board-n8x0.c

@@ -371,7 +371,11 @@ static void n8x0_mmc_callback(void *data, u8 card_mask)
 	else
 		*openp = 0;
 
+#ifdef CONFIG_MMC_OMAP
 	omap_mmc_notify_cover_event(mmc_device, index, *openp);
+#else
+	pr_warn("MMC: notify cover event not available\n");
+#endif
 }
 
 static int n8x0_mmc_late_init(struct device *dev)

arch/arm/mach-omap2/board-omap3beagle.c

@@ -253,6 +253,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= -EINVAL,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -272,12 +273,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 {
 	int r;
 
-	if (beagle_config.mmc1_gpio_wp != -EINVAL)
-		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
 	mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp;
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active
@@ -521,6 +520,11 @@ static void __init omap3_beagle_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_init_rev();
+
+	if (beagle_config.mmc1_gpio_wp != -EINVAL)
+		omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_beagle_i2c_init();
 
 	gpio_buttons[0].gpio = beagle_config.usr_button_gpio;

arch/arm/mach-omap2/board-omap3evm.c

@@ -317,6 +317,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 63,
+		.deferred	= true,
 	},
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 	{
@@ -361,9 +362,8 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 	int r, lcd_bl_en;
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
@@ -644,6 +644,9 @@ static void __init omap3_evm_init(void)
 	omap_board_config = omap3_evm_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
 
+	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_evm_i2c_init();
 
 	omap_display_init(&omap3_evm_dss_data);

arch/arm/mach-omap2/board-omap3logic.c

@@ -128,7 +128,7 @@ static void __init board_mmc_init(void)
 		return;
 	}
 
-	omap2_hsmmc_init(board_mmc_info);
+	omap_hsmmc_init(board_mmc_info);
 }
 
 static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = {

arch/arm/mach-omap2/board-omap3pandora.c

@@ -273,6 +273,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_cd	= -EINVAL,
 		.gpio_wp	= 126,
 		.ext_clock	= 0,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 2,
@@ -281,6 +282,7 @@ static struct omap2_hsmmc_info omap3pandora_mmc[] = {
 		.gpio_wp	= 127,
 		.ext_clock	= 1,
 		.transceiver	= true,
+		.deferred	= true,
 	},
 	{
 		.mmc		= 3,
@@ -300,7 +302,7 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 	/* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */
 	omap3pandora_mmc[0].gpio_cd = gpio + 0;
 	omap3pandora_mmc[1].gpio_cd = gpio + 1;
-	omap2_hsmmc_init(omap3pandora_mmc);
+	omap_hsmmc_late_init(omap3pandora_mmc);
 
 	/* gpio + 13 drives 32kHz buffer for wifi module */
 	gpio_32khz = gpio + 13;
@@ -580,6 +582,7 @@ static struct omap_board_mux board_mux[] __initdata = {
 static void __init omap3pandora_init(void)
 {
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_hsmmc_init(omap3pandora_mmc);
 	omap3pandora_i2c_init();
 	pandora_wl1251_init();
 	platform_add_devices(omap3pandora_devices,

arch/arm/mach-omap2/board-omap3stalker.c

@@ -209,10 +209,11 @@ static struct regulator_init_data omap3stalker_vsim = {
 
 static struct omap2_hsmmc_info mmc[] = {
 	{
-	 .mmc		= 1,
-	 .caps		= MMC_CAP_4_BIT_DATA,
-	 .gpio_cd	= -EINVAL,
-	 .gpio_wp	= 23,
+		.mmc		= 1,
+		.caps		= MMC_CAP_4_BIT_DATA,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= 23,
+		.deferred	= true,
 	 },
 	{}			/* Terminator */
 };
@@ -282,9 +283,8 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 			    unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
@@ -425,6 +425,9 @@ static void __init omap3_stalker_init(void)
 	omap_board_config = omap3_stalker_config;
 	omap_board_config_size = ARRAY_SIZE(omap3_stalker_config);
 
+	omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+	omap_hsmmc_init(mmc);
+
 	omap3_stalker_i2c_init();
 
 	platform_add_devices(omap3_stalker_devices,

arch/arm/mach-omap2/board-omap3touchbook.c

@@ -100,6 +100,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.mmc		= 1,
 		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
 		.gpio_wp	= 29,
+		.deferred	= true,
 	},
 	{}	/* Terminator */
 };
@@ -117,15 +118,9 @@ static struct gpio_led gpio_leds[];
 static int touchbook_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
-		mmc[0].gpio_wp = 23;
-	} else {
-		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
-	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	/* REVISIT: need ehci-omap hooks for external VBUS
 	 * power switch and overcurrent detect
@@ -351,6 +346,14 @@ static void __init omap3_touchbook_init(void)
 
 	pm_power_off = omap3_touchbook_poweroff;
 
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	}
+	omap_hsmmc_init(mmc);
+
 	omap3_touchbook_i2c_init();
 	platform_add_devices(omap3_touchbook_devices,
 			ARRAY_SIZE(omap3_touchbook_devices));

arch/arm/mach-omap2/board-omap4panda.c

@@ -245,9 +245,9 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	struct omap2_hsmmc_info *c;
 
-	omap2_hsmmc_init(controllers);
+	omap_hsmmc_init(controllers);
 	for (c = controllers; c->mmc; c++)
-		omap4_twl6030_hsmmc_set_late_init(c->dev);
+		omap4_twl6030_hsmmc_set_late_init(&c->pdev->dev);
 
 	return 0;
 }
@@ -461,7 +461,7 @@ static struct omap_dss_board_info omap4_panda_dss_data = {
 	.default_device	= &omap4_panda_dvi_device,
 };
 
-void omap4_panda_display_init(void)
+void __init omap4_panda_display_init(void)
 {
 	int r;
 

arch/arm/mach-omap2/board-overo.c

@@ -407,8 +407,6 @@ static inline void __init overo_init_keys(void) { return; }
 static int overo_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
-	omap2_hsmmc_init(mmc);
-
 #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
 	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
 	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
@@ -505,6 +503,7 @@ static void __init overo_init(void)
 	int ret;
 
 	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_hsmmc_init(mmc);
 	overo_i2c_init();
 	omap_display_init(&overo_dss_data);
 	omap_serial_init();

arch/arm/mach-omap2/board-rm680.c

@@ -120,7 +120,7 @@ static void __init rm680_peripherals_init(void)
 				ARRAY_SIZE(rm680_peripherals_devices));
 	rm680_i2c_init();
 	gpmc_onenand_init(board_onenand_data);
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_init(mmc);
 }
 
 #ifdef CONFIG_OMAP_MUX

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -1145,7 +1145,7 @@ void __init rx51_peripherals_init(void)
 
 	partition = omap_mux_get("core");
 	if (partition)
-		omap2_hsmmc_init(mmc);
+		omap_hsmmc_init(mmc);
 
 	rx51_charger_init();
 }

arch/arm/mach-omap2/board-zoom-display.c

@@ -55,6 +55,7 @@ static void zoom_panel_disable_lcd(struct omap_dss_device *dssdev)
 
 static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
 {
+#ifdef CONFIG_TWL4030_CORE
 	unsigned char c;
 	u8 mux_pwm, enb_pwm;
 
@@ -90,6 +91,9 @@ static int zoom_set_bl_intensity(struct omap_dss_device *dssdev, int level)
 	c = ((50 * (100 - level)) / 100) + 1;
 	twl_i2c_write_u8(TWL4030_MODULE_PWM1, 0x7F, TWL_LED_PWMOFF);
 	twl_i2c_write_u8(TWL4030_MODULE_PWM1, c, TWL_LED_PWMON);
+#else
+	pr_warn("Backlight not enabled\n");
+#endif
 
 	return 0;
 }

arch/arm/mach-omap2/board-zoom-peripherals.c

@@ -205,6 +205,7 @@ static struct omap2_hsmmc_info mmc[] = {
 		.caps		= MMC_CAP_4_BIT_DATA,
 		.gpio_wp	= -EINVAL,
 		.power_saving	= true,
+		.deferred	= true,
 	},
 	{
 		.name		= "internal",
@@ -233,7 +234,7 @@ static int zoom_twl_gpio_setup(struct device *dev,
 
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
-	omap2_hsmmc_init(mmc);
+	omap_hsmmc_late_init(mmc);
 
 	ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW,
 			       "lcd enable");
@@ -301,6 +302,7 @@ void __init zoom_peripherals_init(void)
 	if (ret)
 		pr_err("error setting wl12xx data: %d\n", ret);
 
+	omap_hsmmc_init(mmc);
 	omap_i2c_init();
 	platform_device_register(&omap_vwlan_device);
 	usb_musb_init(NULL);

arch/arm/mach-omap2/devices.c

@@ -276,7 +276,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data
 }
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
-static inline void omap_init_mbox(void)
+static inline void __init omap_init_mbox(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -337,7 +337,7 @@ static inline void omap_init_audio(void) {}
 #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \
 		defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE)
 
-static void omap_init_mcpdm(void)
+static void __init omap_init_mcpdm(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -358,7 +358,7 @@ static inline void omap_init_mcpdm(void) {}
 #if defined(CONFIG_SND_OMAP_SOC_DMIC) || \
 		defined(CONFIG_SND_OMAP_SOC_DMIC_MODULE)
 
-static void omap_init_dmic(void)
+static void __init omap_init_dmic(void)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;
@@ -380,7 +380,7 @@ static inline void omap_init_dmic(void) {}
 
 #include <plat/mcspi.h>
 
-static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
 	char *name = "omap2_mcspi";
@@ -654,9 +654,7 @@ void __init omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
 /*-------------------------------------------------------------------------*/
 
 #if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
-#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
 #define OMAP_HDQ_BASE	0x480B2000
-#endif
 static struct resource omap_hdq_resources[] = {
 	{
 		.start		= OMAP_HDQ_BASE,
@@ -679,7 +677,10 @@ static struct platform_device omap_hdq_dev = {
 };
 static inline void omap_hdq_init(void)
 {
-	(void) platform_device_register(&omap_hdq_dev);
+	if (cpu_is_omap2420())
+		return;
+
+	platform_device_register(&omap_hdq_dev);
 }
 #else
 static inline void omap_hdq_init(void) {}

arch/arm/mach-omap2/display.c

@@ -124,7 +124,7 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags)
 	}
 }
 
-static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
+static int __init omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 {
 	u32 enable_mask, enable_shift;
 	u32 pipd_mask, pipd_shift;
@@ -157,7 +157,7 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes)
 	return 0;
 }
 
-int omap_hdmi_init(enum omap_hdmi_flags flags)
+int __init omap_hdmi_init(enum omap_hdmi_flags flags)
 {
 	if (cpu_is_omap44xx())
 		omap4_hdmi_mux_pads(flags);
@@ -165,7 +165,7 @@ int omap_hdmi_init(enum omap_hdmi_flags flags)
 	return 0;
 }
 
-static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
+static int __init omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())
 		return omap4_dsi_mux_pads(dsi_id, lane_mask);
@@ -173,7 +173,7 @@ static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask)
 	return 0;
 }
 
-static void omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
+static void __init omap_dsi_disable_pads(int dsi_id, unsigned lane_mask)
 {
 	if (cpu_is_omap44xx())
 		omap4_dsi_mux_pads(dsi_id, 0);

arch/arm/mach-omap2/dma.c

@@ -227,7 +227,7 @@ static int __init omap2_system_dma_init_dev(struct omap_hwmod *oh, void *unused)
 
 	dma_stride		= OMAP2_DMA_STRIDE;
 	dma_common_ch_start	= CSDP;
-	if (cpu_is_omap3630() || cpu_is_omap4430())
+	if (cpu_is_omap3630() || cpu_is_omap44xx())
 		dma_common_ch_end = CCDN;
 	else
 		dma_common_ch_end = CCFN;

arch/arm/mach-omap2/gpio.c

@@ -24,7 +24,7 @@
 #include <plat/omap_hwmod.h>
 #include <plat/omap_device.h>
 
-static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
 {
 	struct platform_device *pdev;
 	struct omap_gpio_platform_data *pdata;

arch/arm/mach-omap2/hsmmc.c

@@ -293,8 +293,8 @@ static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
 	}
 }
 
-static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
-				 struct omap_mmc_platform_data *mmc)
+static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
+					struct omap_mmc_platform_data *mmc)
 {
 	char *hc_name;
 
@@ -428,69 +428,140 @@ static int omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 	return 0;
 }
 
+static int omap_hsmmc_done;
+
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
+{
+	struct platform_device *pdev;
+	struct omap_mmc_platform_data *mmc_pdata;
+	int res;
+
+	if (omap_hsmmc_done != 1)
+		return;
+
+	omap_hsmmc_done++;
+
+	for (; c->mmc; c++) {
+		if (!c->deferred)
+			continue;
+
+		pdev = c->pdev;
+		if (!pdev)
+			continue;
+
+		mmc_pdata = pdev->dev.platform_data;
+		if (!mmc_pdata)
+			continue;
+
+		mmc_pdata->slots[0].switch_pin = c->gpio_cd;
+		mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+
+		res = omap_device_register(pdev);
+		if (res)
+			pr_err("Could not late init MMC %s\n",
+			       c->name);
+	}
+}
+
 #define MAX_OMAP_MMC_HWMOD_NAME_LEN		16
 
-void omap_init_hsmmc(struct omap2_hsmmc_info *hsmmcinfo, int ctrl_nr)
+static void omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
+					int ctrl_nr)
 {
 	struct omap_hwmod *oh;
+	struct omap_hwmod *ohs[1];
+	struct omap_device *od;
 	struct platform_device *pdev;
 	char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
 	struct omap_mmc_platform_data *mmc_data;
 	struct omap_mmc_dev_attr *mmc_dev_attr;
 	char *name;
-	int l;
+	int res;
 
 	mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 	if (!mmc_data) {
 		pr_err("Cannot allocate memory for mmc device!\n");
-		goto done;
+		return;
 	}
 
-	if (omap_hsmmc_pdata_init(hsmmcinfo, mmc_data) < 0) {
-		pr_err("%s fails!\n", __func__);
-		goto done;
-	}
+	res = omap_hsmmc_pdata_init(hsmmcinfo, mmc_data);
+	if (res < 0)
+		goto free_mmc;
+
 	omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
 
 	name = "omap_hsmmc";
-
-	l = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
+	res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
 		     "mmc%d", ctrl_nr);
-	WARN(l >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
+	WARN(res >= MAX_OMAP_MMC_HWMOD_NAME_LEN,
 	     "String buffer overflow in MMC%d device setup\n", ctrl_nr);
+
 	oh = omap_hwmod_lookup(oh_name);
 	if (!oh) {
 		pr_err("Could not look up %s\n", oh_name);
-		kfree(mmc_data->slots[0].name);
-		goto done;
+		goto free_name;
 	}
-
+	ohs[0] = oh;
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
 	}
 
-	pdev = omap_device_build(name, ctrl_nr - 1, oh, mmc_data,
-		sizeof(struct omap_mmc_platform_data), NULL, 0, false);
-	if (IS_ERR(pdev)) {
-		WARN(1, "Can't build omap_device for %s:%s.\n", name, oh->name);
-		kfree(mmc_data->slots[0].name);
-		goto done;
+	pdev = platform_device_alloc(name, ctrl_nr - 1);
+	if (!pdev) {
+		pr_err("Could not allocate pdev for %s\n", name);
+		goto free_name;
 	}
-	/*
-	 * return device handle to board setup code
-	 * required to populate for regulator framework structure
-	 */
-	hsmmcinfo->dev = &pdev->dev;
+	dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
+
+	od = omap_device_alloc(pdev, ohs, 1, NULL, 0);
+	if (!od) {
+		pr_err("Could not allocate od for %s\n", name);
+		goto put_pdev;
+	}
+
+	res = platform_device_add_data(pdev, mmc_data,
+			      sizeof(struct omap_mmc_platform_data));
+	if (res) {
+		pr_err("Could not add pdata for %s\n", name);
+		goto put_pdev;
+	}
+
+	hsmmcinfo->pdev = pdev;
+
+	if (hsmmcinfo->deferred)
+		goto free_mmc;
 
-done:
+	res = omap_device_register(pdev);
+	if (res) {
+		pr_err("Could not register od for %s\n", name);
+		goto free_od;
+	}
+
+	goto free_mmc;
+
+free_od:
+	omap_device_delete(od);
+
+put_pdev:
+	platform_device_put(pdev);
+
+free_name:
+	kfree(mmc_data->slots[0].name);
+
+free_mmc:
 	kfree(mmc_data);
 }
 
-void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
+void __init omap_hsmmc_init(struct omap2_hsmmc_info *controllers)
 {
 	u32 reg;
 
+	if (omap_hsmmc_done)
+		return;
+
+	omap_hsmmc_done = 1;
+
 	if (!cpu_is_omap44xx()) {
 		if (cpu_is_omap2430()) {
 			control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -515,7 +586,7 @@ void omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	}
 
 	for (; controllers->mmc; controllers++)
-		omap_init_hsmmc(controllers, controllers->mmc);
+		omap_hsmmc_init_one(controllers, controllers->mmc);
 
 }
 

arch/arm/mach-omap2/hsmmc.h

@@ -21,10 +21,11 @@ struct omap2_hsmmc_info {
 	bool	no_off;		/* power_saving and power is not to go off */
 	bool	no_off_init;	/* no power off when not in MMC sleep state */
 	bool	vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
+	bool	deferred;	/* mmc needs a deferred probe */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
 	char	*name;		/* or NULL for default */
-	struct device *dev;	/* returned: pointer to mmc adapter */
+	struct platform_device *pdev;	/* mmc controller instance */
 	int	ocr_mask;	/* temporary HACK */
 	/* Remux (pad configuration) when powering on/off */
 	void (*remux)(struct device *dev, int slot, int power_on);
@@ -34,11 +35,16 @@ struct omap2_hsmmc_info {
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
 
-void omap2_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_init(struct omap2_hsmmc_info *);
+void omap_hsmmc_late_init(struct omap2_hsmmc_info *);
 
 #else
 
-static inline void omap2_hsmmc_init(struct omap2_hsmmc_info *info)
+static inline void omap_hsmmc_init(struct omap2_hsmmc_info *info)
+{
+}
+
+static inline void omap_hsmmc_late_init(struct omap2_hsmmc_info *info)
 {
 }
 

arch/arm/mach-omap2/mcbsp.c

@@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigned int id, bool enable)
 	return 0;
 }
 
-static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 {
 	int id, count = 1;
 	char *name = "omap-mcbsp";

arch/arm/mach-omap2/mux.c

@@ -100,8 +100,8 @@ void omap_mux_write_array(struct omap_mux_partition *partition,
 
 static char *omap_mux_options;
 
-static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
-			       int gpio, int val)
+static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition,
+				      int gpio, int val)
 {
 	struct omap_mux_entry *e;
 	struct omap_mux *gpio_mux = NULL;
@@ -145,7 +145,7 @@ static int _omap_mux_init_gpio(struct omap_mux_partition *partition,
 	return 0;
 }
 
-int omap_mux_init_gpio(int gpio, int val)
+int __init omap_mux_init_gpio(int gpio, int val)
 {
 	struct omap_mux_partition *partition;
 	int ret;
@@ -159,9 +159,9 @@ int omap_mux_init_gpio(int gpio, int val)
 	return -ENODEV;
 }
 
-static int _omap_mux_get_by_name(struct omap_mux_partition *partition,
-				 const char *muxname,
-				 struct omap_mux **found_mux)
+static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition,
+					const char *muxname,
+					struct omap_mux **found_mux)
 {
 	struct omap_mux *mux = NULL;
 	struct omap_mux_entry *e;
@@ -240,7 +240,7 @@ omap_mux_get_by_name(const char *muxname,
 	return -ENODEV;
 }
 
-int omap_mux_init_signal(const char *muxname, int val)
+int __init omap_mux_init_signal(const char *muxname, int val)
 {
 	struct omap_mux_partition *partition = NULL;
 	struct omap_mux *mux = NULL;

arch/arm/mach-omap2/mux.h

@@ -246,7 +246,7 @@ static inline void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state)
 {
 }
 
-static struct omap_board_mux *board_mux __initdata __maybe_unused;
+static struct omap_board_mux *board_mux __maybe_unused;
 
 #endif
 

arch/arm/mach-omap2/omap-hotplug.c

@@ -33,7 +33,7 @@ int platform_cpu_kill(unsigned int cpu)
  * platform-specific code to shutdown a CPU
  * Called with IRQs disabled
  */
-void platform_cpu_die(unsigned int cpu)
+void __ref platform_cpu_die(unsigned int cpu)
 {
 	unsigned int this_cpu;
 

arch/arm/mach-omap2/omap-mpuss-lowpower.c

@@ -300,7 +300,7 @@ int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
  * @cpu : CPU ID
  * @power_state: CPU low power state.
  */
-int omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
+int __cpuinit omap4_hotplug_cpu(unsigned int cpu, unsigned int power_state)
 {
 	unsigned int cpu_state = 0;
 

arch/arm/mach-omap2/pm.c

@@ -28,7 +28,7 @@
 
 static struct omap_device_pm_latency *pm_lats;
 
-static int _init_omap_device(char *name)
+static int __init _init_omap_device(char *name)
 {
 	struct omap_hwmod *oh;
 	struct platform_device *pdev;

arch/arm/mach-omap2/smartreflex.c

@@ -1012,7 +1012,7 @@ static int __devexit omap_sr_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver smartreflex_driver = {
-	.remove         = omap_sr_remove,
+	.remove         = __devexit_p(omap_sr_remove),
 	.driver		= {
 		.name	= "smartreflex",
 	},

arch/arm/mach-omap2/sr_device.c

@@ -69,7 +69,7 @@ static void __init sr_set_nvalues(struct omap_volt_data *volt_data,
 	sr_data->nvalue_count = count;
 }
 
-static int sr_dev_init(struct omap_hwmod *oh, void *user)
+static int __init sr_dev_init(struct omap_hwmod *oh, void *user)
 {
 	struct omap_sr_data *sr_data;
 	struct platform_device *pdev;

arch/arm/plat-omap/dma.c

@@ -2125,7 +2125,7 @@ static int __devexit omap_system_dma_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_system_dma_driver = {
 	.probe		= omap_system_dma_probe,
-	.remove		= omap_system_dma_remove,
+	.remove		= __devexit_p(omap_system_dma_remove),
 	.driver		= {
 		.name	= "omap_dma_system"
 	},

arch/arm/plat-omap/include/plat/omap_device.h

@@ -100,6 +100,13 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 struct omap_device_pm_latency *pm_lats,
 					 int pm_lats_cnt, int is_early_device);
 
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
+				      struct omap_hwmod **ohs, int oh_cnt,
+				      struct omap_device_pm_latency *pm_lats,
+				      int pm_lats_cnt);
+void omap_device_delete(struct omap_device *od);
+int omap_device_register(struct platform_device *pdev);
+
 void __iomem *omap_device_get_rt_va(struct omap_device *od);
 struct device *omap_device_get_by_hwmod_name(const char *oh_name);
 

arch/arm/plat-omap/omap_device.c

+
 /*
  * omap_device implementation
  *
@@ -97,14 +98,7 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-static int omap_device_register(struct platform_device *pdev);
 static int omap_early_device_register(struct platform_device *pdev);
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
-				      struct omap_hwmod **ohs, int oh_cnt,
-				      struct omap_device_pm_latency *pm_lats,
-				      int pm_lats_cnt);
-static void omap_device_delete(struct omap_device *od);
-
 
 static struct omap_device_pm_latency omap_default_latency[] = {
 	{
@@ -509,7 +503,7 @@ static int omap_device_fill_resources(struct omap_device *od,
  *
  * Returns an struct omap_device pointer or ERR_PTR() on error;
  */
-static struct omap_device *omap_device_alloc(struct platform_device *pdev,
+struct omap_device *omap_device_alloc(struct platform_device *pdev,
 					struct omap_hwmod **ohs, int oh_cnt,
 					struct omap_device_pm_latency *pm_lats,
 					int pm_lats_cnt)
@@ -591,7 +585,7 @@ static struct omap_device *omap_device_alloc(struct platform_device *pdev,
 	return ERR_PTR(ret);
 }
 
-static void omap_device_delete(struct omap_device *od)
+void omap_device_delete(struct omap_device *od)
 {
 	if (!od)
 		return;
@@ -619,7 +613,7 @@ static void omap_device_delete(struct omap_device *od)
  * information.  Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
  * passes along the return value of omap_device_build_ss().
  */
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build(const char *pdev_name, int pdev_id,
 				      struct omap_hwmod *oh, void *pdata,
 				      int pdata_len,
 				      struct omap_device_pm_latency *pm_lats,
@@ -652,7 +646,7 @@ struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
  * platform_device record.  Returns an ERR_PTR() on error, or passes
  * along the return value of omap_device_register().
  */
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+struct platform_device __init *omap_device_build_ss(const char *pdev_name, int pdev_id,
 					 struct omap_hwmod **ohs, int oh_cnt,
 					 void *pdata, int pdata_len,
 					 struct omap_device_pm_latency *pm_lats,
@@ -717,7 +711,7 @@ struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
  * platform_early_add_device() on the underlying platform_device.
  * Returns 0 by default.
  */
-static int omap_early_device_register(struct platform_device *pdev)
+static int __init omap_early_device_register(struct platform_device *pdev)
 {
 	struct platform_device *devices[1];
 
@@ -817,7 +811,7 @@ static struct dev_pm_domain omap_device_pm_domain = {
  * platform_device_register() on the underlying platform_device.
  * Returns the return value of platform_device_register().
  */
-static int omap_device_register(struct platform_device *pdev)
+int omap_device_register(struct platform_device *pdev)
 {
 	pr_debug("omap_device: %s: registering\n", pdev->name);