Merge tag 'timers-v5.7' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clockevent/clocksource updates from Daniel Lezcano:

- Avoid creating dead devices by flagging the driver with OF_POPULATED
  in order to prevent the platform to create another device (Saravana Kannan)

- Remove unused includes from imx family drivers (Anson Huang)

- timer-dm-ti rework to prepare for pwm and suspend support (Lokesh Vutla)

- Fix the rate for the global clock on the pit64b (Claudiu Beznea)

- Fix timer-cs5535 by requesting an irq with non-NULL dev_id (Afzal Mohammed)

- Replace setup_irq() by request_irq() (Afzal Mohammed)

- Add support for the TCU of X1000 (Zhou Yanjie)

- Drop the bogus omap_dm_timer_of_set_source() function (Suman Anna)

- Do not update the counter when updating the period in order to
  prevent a disruption when the pwm is used (Lokesh Vutla)

- Improve owl_timer_init() failure messages (Matheus Castello)

- Add driver for the Ingenic JZ47xx OST (Maarten ter Huurne)

- Pass the interrupt and the shutdown callbacks in the init function
  for ast2600 support (Joel Stanley)

- Add the ast2600 compatible string for the fttmr010 (Joel Stanley)

Documentation/devicetree/bindings/timer/faraday,fttmr010.txt

@@ -11,6 +11,7 @@ Required properties:
   "moxa,moxart-timer", "faraday,fttmr010"
   "aspeed,ast2400-timer"
   "aspeed,ast2500-timer"
+  "aspeed,ast2600-timer"
 
 - reg : Should contain registers location and length
 - interrupts : Should contain the three timer interrupts usually with

Documentation/devicetree/bindings/timer/ingenic,tcu.txt

@@ -10,6 +10,7 @@ Required properties:
   * ingenic,jz4740-tcu
   * ingenic,jz4725b-tcu
   * ingenic,jz4770-tcu
+  * ingenic,x1000-tcu
   followed by "simple-mfd".
 - reg: Should be the offset/length value corresponding to the TCU registers
 - clocks: List of phandle & clock specifiers for clocks external to the TCU.

drivers/clocksource/Kconfig

@@ -697,6 +697,14 @@ config INGENIC_TIMER
 	help
 	  Support for the timer/counter unit of the Ingenic JZ SoCs.
 
+config INGENIC_OST
+	bool "Clocksource for Ingenic OS Timer"
+	depends on MIPS || COMPILE_TEST
+	depends on COMMON_CLK
+	select MFD_SYSCON
+	help
+	  Support for the Operating System Timer of the Ingenic JZ SoCs.
+
 config MICROCHIP_PIT64B
 	bool "Microchip PIT64B support"
 	depends on OF || COMPILE_TEST

drivers/clocksource/Makefile

@@ -80,6 +80,7 @@ obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o
 obj-$(CONFIG_H8300_TPU)			+= h8300_tpu.o
+obj-$(CONFIG_INGENIC_OST)		+= ingenic-ost.o
 obj-$(CONFIG_INGENIC_TIMER)		+= ingenic-timer.o
 obj-$(CONFIG_CLKSRC_ST_LPC)		+= clksrc_st_lpc.o
 obj-$(CONFIG_X86_NUMACHIP)		+= numachip.o

drivers/clocksource/bcm2835_timer.c

@@ -31,7 +31,6 @@ struct bcm2835_timer {
 	void __iomem *compare;
 	int match_mask;
 	struct clock_event_device evt;
-	struct irqaction act;
 };
 
 static void __iomem *system_clock __read_mostly;
@@ -113,12 +112,9 @@ static int __init bcm2835_timer_init(struct device_node *node)
 	timer->evt.features = CLOCK_EVT_FEAT_ONESHOT;
 	timer->evt.set_next_event = bcm2835_time_set_next_event;
 	timer->evt.cpumask = cpumask_of(0);
-	timer->act.name = node->name;
-	timer->act.flags = IRQF_TIMER | IRQF_SHARED;
-	timer->act.dev_id = timer;
-	timer->act.handler = bcm2835_time_interrupt;
 
-	ret = setup_irq(irq, &timer->act);
+	ret = request_irq(irq, bcm2835_time_interrupt, IRQF_TIMER | IRQF_SHARED,
+			  node->name, timer);
 	if (ret) {
 		pr_err("Can't set up timer IRQ\n");
 		goto err_timer_free;

drivers/clocksource/bcm_kona_timer.c

@@ -160,12 +160,6 @@ static irqreturn_t kona_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction kona_timer_irq = {
-	.name = "Kona Timer Tick",
-	.flags = IRQF_TIMER,
-	.handler = kona_timer_interrupt,
-};
-
 static int __init kona_timer_init(struct device_node *node)
 {
 	u32 freq;
@@ -192,7 +186,9 @@ static int __init kona_timer_init(struct device_node *node)
 	kona_timer_disable_and_clear(timers.tmr_regs);
 
 	kona_timer_clockevents_init();
-	setup_irq(timers.tmr_irq, &kona_timer_irq);
+	if (request_irq(timers.tmr_irq, kona_timer_interrupt, IRQF_TIMER,
+			"Kona Timer Tick", NULL))
+		pr_err("%s: request_irq() failed\n", "Kona Timer Tick");
 	kona_timer_set_next_event((arch_timer_rate / HZ), NULL);
 
 	return 0;

drivers/clocksource/dw_apb_timer.c

@@ -270,15 +270,10 @@ dw_apb_clockevent_init(int cpu, const char *name, unsigned rating,
 	dw_ced->ced.rating = rating;
 	dw_ced->ced.name = name;
 
-	dw_ced->irqaction.name		= dw_ced->ced.name;
-	dw_ced->irqaction.handler	= dw_apb_clockevent_irq;
-	dw_ced->irqaction.dev_id	= &dw_ced->ced;
-	dw_ced->irqaction.irq		= irq;
-	dw_ced->irqaction.flags		= IRQF_TIMER | IRQF_IRQPOLL |
-					  IRQF_NOBALANCING;
-
 	dw_ced->eoi = apbt_eoi;
-	err = setup_irq(irq, &dw_ced->irqaction);
+	err = request_irq(irq, dw_apb_clockevent_irq,
+			  IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
+			  dw_ced->ced.name, &dw_ced->ced);
 	if (err) {
 		pr_err("failed to request timer irq\n");
 		kfree(dw_ced);

drivers/clocksource/exynos_mct.c

@@ -329,19 +329,15 @@ static irqreturn_t exynos4_mct_comp_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mct_comp_event_irq = {
-	.name		= "mct_comp_irq",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= exynos4_mct_comp_isr,
-	.dev_id		= &mct_comp_device,
-};
-
 static int exynos4_clockevent_init(void)
 {
 	mct_comp_device.cpumask = cpumask_of(0);
 	clockevents_config_and_register(&mct_comp_device, clk_rate,
 					0xf, 0xffffffff);
-	setup_irq(mct_irqs[MCT_G0_IRQ], &mct_comp_event_irq);
+	if (request_irq(mct_irqs[MCT_G0_IRQ], exynos4_mct_comp_isr,
+			IRQF_TIMER | IRQF_IRQPOLL, "mct_comp_irq",
+			&mct_comp_device))
+		pr_err("%s: request_irq() failed\n", "mct_comp_irq");
 
 	return 0;
 }

drivers/clocksource/ingenic-ost.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * JZ47xx SoCs TCU Operating System Timer driver
+ *
+ * Copyright (C) 2016 Maarten ter Huurne <maarten@treewalker.org>
+ * Copyright (C) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/sched_clock.h>
+
+#define TCU_OST_TCSR_MASK	0xffc0
+#define TCU_OST_TCSR_CNT_MD	BIT(15)
+
+#define TCU_OST_CHANNEL		15
+
+/*
+ * The TCU_REG_OST_CNT{L,R} from <linux/mfd/ingenic-tcu.h> are only for the
+ * regmap; these are for use with the __iomem pointer.
+ */
+#define OST_REG_CNTL		0x4
+#define OST_REG_CNTH		0x8
+
+struct ingenic_ost_soc_info {
+	bool is64bit;
+};
+
+struct ingenic_ost {
+	void __iomem *regs;
+	struct clk *clk;
+
+	struct clocksource cs;
+};
+
+static struct ingenic_ost *ingenic_ost;
+
+static u64 notrace ingenic_ost_read_cntl(void)
+{
+	/* Read using __iomem pointer instead of regmap to avoid locking */
+	return readl(ingenic_ost->regs + OST_REG_CNTL);
+}
+
+static u64 notrace ingenic_ost_read_cnth(void)
+{
+	/* Read using __iomem pointer instead of regmap to avoid locking */
+	return readl(ingenic_ost->regs + OST_REG_CNTH);
+}
+
+static u64 notrace ingenic_ost_clocksource_readl(struct clocksource *cs)
+{
+	return ingenic_ost_read_cntl();
+}
+
+static u64 notrace ingenic_ost_clocksource_readh(struct clocksource *cs)
+{
+	return ingenic_ost_read_cnth();
+}
+
+static int __init ingenic_ost_probe(struct platform_device *pdev)
+{
+	const struct ingenic_ost_soc_info *soc_info;
+	struct device *dev = &pdev->dev;
+	struct ingenic_ost *ost;
+	struct clocksource *cs;
+	struct regmap *map;
+	unsigned long rate;
+	int err;
+
+	soc_info = device_get_match_data(dev);
+	if (!soc_info)
+		return -EINVAL;
+
+	ost = devm_kzalloc(dev, sizeof(*ost), GFP_KERNEL);
+	if (!ost)
+		return -ENOMEM;
+
+	ingenic_ost = ost;
+
+	ost->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ost->regs))
+		return PTR_ERR(ost->regs);
+
+	map = device_node_to_regmap(dev->parent->of_node);
+	if (!map) {
+		dev_err(dev, "regmap not found");
+		return -EINVAL;
+	}
+
+	ost->clk = devm_clk_get(dev, "ost");
+	if (IS_ERR(ost->clk))
+		return PTR_ERR(ost->clk);
+
+	err = clk_prepare_enable(ost->clk);
+	if (err)
+		return err;
+
+	/* Clear counter high/low registers */
+	if (soc_info->is64bit)
+		regmap_write(map, TCU_REG_OST_CNTL, 0);
+	regmap_write(map, TCU_REG_OST_CNTH, 0);
+
+	/* Don't reset counter at compare value. */
+	regmap_update_bits(map, TCU_REG_OST_TCSR,
+			   TCU_OST_TCSR_MASK, TCU_OST_TCSR_CNT_MD);
+
+	rate = clk_get_rate(ost->clk);
+
+	/* Enable OST TCU channel */
+	regmap_write(map, TCU_REG_TESR, BIT(TCU_OST_CHANNEL));
+
+	cs = &ost->cs;
+	cs->name	= "ingenic-ost";
+	cs->rating	= 320;
+	cs->flags	= CLOCK_SOURCE_IS_CONTINUOUS;
+	cs->mask	= CLOCKSOURCE_MASK(32);
+
+	if (soc_info->is64bit)
+		cs->read = ingenic_ost_clocksource_readl;
+	else
+		cs->read = ingenic_ost_clocksource_readh;
+
+	err = clocksource_register_hz(cs, rate);
+	if (err) {
+		dev_err(dev, "clocksource registration failed");
+		clk_disable_unprepare(ost->clk);
+		return err;
+	}
+
+	if (soc_info->is64bit)
+		sched_clock_register(ingenic_ost_read_cntl, 32, rate);
+	else
+		sched_clock_register(ingenic_ost_read_cnth, 32, rate);
+
+	return 0;
+}
+
+static int __maybe_unused ingenic_ost_suspend(struct device *dev)
+{
+	struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+	clk_disable(ost->clk);
+
+	return 0;
+}
+
+static int __maybe_unused ingenic_ost_resume(struct device *dev)
+{
+	struct ingenic_ost *ost = dev_get_drvdata(dev);
+
+	return clk_enable(ost->clk);
+}
+
+static const struct dev_pm_ops __maybe_unused ingenic_ost_pm_ops = {
+	/* _noirq: We want the OST clock to be gated last / ungated first */
+	.suspend_noirq = ingenic_ost_suspend,
+	.resume_noirq  = ingenic_ost_resume,
+};
+
+static const struct ingenic_ost_soc_info jz4725b_ost_soc_info = {
+	.is64bit = false,
+};
+
+static const struct ingenic_ost_soc_info jz4770_ost_soc_info = {
+	.is64bit = true,
+};
+
+static const struct of_device_id ingenic_ost_of_match[] = {
+	{ .compatible = "ingenic,jz4725b-ost", .data = &jz4725b_ost_soc_info, },
+	{ .compatible = "ingenic,jz4770-ost", .data = &jz4770_ost_soc_info, },
+	{ }
+};
+
+static struct platform_driver ingenic_ost_driver = {
+	.driver = {
+		.name = "ingenic-ost",
+#ifdef CONFIG_PM_SUSPEND
+		.pm = &ingenic_ost_pm_ops,
+#endif
+		.of_match_table = ingenic_ost_of_match,
+	},
+};
+builtin_platform_driver_probe(ingenic_ost_driver, ingenic_ost_probe);

drivers/clocksource/ingenic-timer.c

@@ -230,6 +230,7 @@ static const struct of_device_id ingenic_tcu_of_match[] = {
 	{ .compatible = "ingenic,jz4740-tcu", .data = &jz4740_soc_info, },
 	{ .compatible = "ingenic,jz4725b-tcu", .data = &jz4725b_soc_info, },
 	{ .compatible = "ingenic,jz4770-tcu", .data = &jz4740_soc_info, },
+	{ .compatible = "ingenic,x1000-tcu", .data = &jz4740_soc_info, },
 	{ /* sentinel */ }
 };
 
@@ -302,7 +303,7 @@ static int __init ingenic_tcu_init(struct device_node *np)
 TIMER_OF_DECLARE(jz4740_tcu_intc,  "ingenic,jz4740-tcu",  ingenic_tcu_init);
 TIMER_OF_DECLARE(jz4725b_tcu_intc, "ingenic,jz4725b-tcu", ingenic_tcu_init);
 TIMER_OF_DECLARE(jz4770_tcu_intc,  "ingenic,jz4770-tcu",  ingenic_tcu_init);
-
+TIMER_OF_DECLARE(x1000_tcu_intc,  "ingenic,x1000-tcu",  ingenic_tcu_init);
 
 static int __init ingenic_tcu_probe(struct platform_device *pdev)
 {

drivers/clocksource/mxs_timer.c

@@ -117,13 +117,6 @@ static irqreturn_t mxs_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mxs_timer_irq = {
-	.name		= "MXS Timer Tick",
-	.dev_id		= &mxs_clockevent_device,
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= mxs_timer_interrupt,
-};
-
 static void mxs_irq_clear(char *state)
 {
 	/* Disable interrupt in timer module */
@@ -277,6 +270,7 @@ static int __init mxs_timer_init(struct device_node *np)
 	if (irq <= 0)
 		return -EINVAL;
 
-	return setup_irq(irq, &mxs_timer_irq);
+	return request_irq(irq, mxs_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			   "MXS Timer Tick", &mxs_clockevent_device);
 }
 TIMER_OF_DECLARE(mxs, "fsl,timrot", mxs_timer_init);

drivers/clocksource/nomadik-mtu.c

@@ -181,13 +181,6 @@ static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction nmdk_timer_irq = {
-	.name		= "Nomadik Timer Tick",
-	.flags		= IRQF_TIMER,
-	.handler	= nmdk_timer_interrupt,
-	.dev_id		= &nmdk_clkevt,
-};
-
 static int __init nmdk_timer_init(void __iomem *base, int irq,
 				   struct clk *pclk, struct clk *clk)
 {
@@ -232,7 +225,9 @@ static int __init nmdk_timer_init(void __iomem *base, int irq,
 	sched_clock_register(nomadik_read_sched_clock, 32, rate);
 
 	/* Timer 1 is used for events, register irq and clockevents */
-	setup_irq(irq, &nmdk_timer_irq);
+	if (request_irq(irq, nmdk_timer_interrupt, IRQF_TIMER,
+			"Nomadik Timer Tick", &nmdk_clkevt))
+		pr_err("%s: request_irq() failed\n", "Nomadik Timer Tick");
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	nmdk_clkevt.irq = irq;
 	clockevents_config_and_register(&nmdk_clkevt, rate, 2, 0xffffffffU);

drivers/clocksource/samsung_pwm_timer.c

@@ -256,13 +256,6 @@ static irqreturn_t samsung_clock_event_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction samsung_clock_event_irq = {
-	.name		= "samsung_time_irq",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= samsung_clock_event_isr,
-	.dev_id		= &time_event_device,
-};
-
 static void __init samsung_clockevent_init(void)
 {
 	unsigned long pclk;
@@ -282,7 +275,10 @@ static void __init samsung_clockevent_init(void)
 						clock_rate, 1, pwm.tcnt_max);
 
 	irq_number = pwm.irq[pwm.event_id];
-	setup_irq(irq_number, &samsung_clock_event_irq);
+	if (request_irq(irq_number, samsung_clock_event_isr,
+			IRQF_TIMER | IRQF_IRQPOLL, "samsung_time_irq",
+			&time_event_device))
+		pr_err("%s: request_irq() failed\n", "samsung_time_irq");
 
 	if (pwm.variant.has_tint_cstat) {
 		u32 mask = (1 << pwm.event_id);

drivers/clocksource/timer-atlas7.c

@@ -159,29 +159,23 @@ static struct clocksource sirfsoc_clocksource = {
 	.resume = sirfsoc_clocksource_resume,
 };
 
-static struct irqaction sirfsoc_timer_irq = {
-	.name = "sirfsoc_timer0",
-	.flags = IRQF_TIMER | IRQF_NOBALANCING,
-	.handler = sirfsoc_timer_interrupt,
-};
-
-static struct irqaction sirfsoc_timer1_irq = {
-	.name = "sirfsoc_timer1",
-	.flags = IRQF_TIMER | IRQF_NOBALANCING,
-	.handler = sirfsoc_timer_interrupt,
-};
+static unsigned int sirfsoc_timer_irq, sirfsoc_timer1_irq;
 
 static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
 {
 	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
-	struct irqaction *action;
-
-	if (cpu == 0)
-		action = &sirfsoc_timer_irq;
-	else
-		action = &sirfsoc_timer1_irq;
+	unsigned int irq;
+	const char *name;
+
+	if (cpu == 0) {
+		irq = sirfsoc_timer_irq;
+		name = "sirfsoc_timer0";
+	} else {
+		irq = sirfsoc_timer1_irq;
+		name = "sirfsoc_timer1";
+	}
 
-	ce->irq = action->irq;
+	ce->irq = irq;
 	ce->name = "local_timer";
 	ce->features = CLOCK_EVT_FEAT_ONESHOT;
 	ce->rating = 200;
@@ -196,9 +190,9 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
 	ce->min_delta_ticks = 2;
 	ce->cpumask = cpumask_of(cpu);
 
-	action->dev_id = ce;
-	BUG_ON(setup_irq(ce->irq, action));
-	irq_force_affinity(action->irq, cpumask_of(cpu));
+	BUG_ON(request_irq(ce->irq, sirfsoc_timer_interrupt,
+			   IRQF_TIMER | IRQF_NOBALANCING, name, ce));
+	irq_force_affinity(ce->irq, cpumask_of(cpu));
 
 	clockevents_register_device(ce);
 	return 0;
@@ -206,12 +200,14 @@ static int sirfsoc_local_timer_starting_cpu(unsigned int cpu)
 
 static int sirfsoc_local_timer_dying_cpu(unsigned int cpu)
 {
+	struct clock_event_device *ce = per_cpu_ptr(sirfsoc_clockevent, cpu);
+
 	sirfsoc_timer_count_disable(1);
 
 	if (cpu == 0)
-		remove_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+		free_irq(sirfsoc_timer_irq, ce);
 	else
-		remove_irq(sirfsoc_timer1_irq.irq, &sirfsoc_timer1_irq);
+		free_irq(sirfsoc_timer1_irq, ce);
 	return 0;
 }
 
@@ -268,14 +264,14 @@ static int __init sirfsoc_of_timer_init(struct device_node *np)
 		return -ENXIO;
 	}
 
-	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
-	if (!sirfsoc_timer_irq.irq) {
+	sirfsoc_timer_irq = irq_of_parse_and_map(np, 0);
+	if (!sirfsoc_timer_irq) {
 		pr_err("No irq passed for timer0 via DT\n");
 		return -EINVAL;
 	}
 
-	sirfsoc_timer1_irq.irq = irq_of_parse_and_map(np, 1);
-	if (!sirfsoc_timer1_irq.irq) {
+	sirfsoc_timer1_irq = irq_of_parse_and_map(np, 1);
+	if (!sirfsoc_timer1_irq) {
 		pr_err("No irq passed for timer1 via DT\n");
 		return -EINVAL;
 	}

drivers/clocksource/timer-cs5535.c

@@ -131,14 +131,9 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction mfgptirq  = {
-	.handler = mfgpt_tick,
-	.flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED,
-	.name = DRV_NAME,
-};
-
 static int __init cs5535_mfgpt_init(void)
 {
+	unsigned long flags = IRQF_NOBALANCING | IRQF_TIMER | IRQF_SHARED;
 	struct cs5535_mfgpt_timer *timer;
 	int ret;
 	uint16_t val;
@@ -158,7 +153,7 @@ static int __init cs5535_mfgpt_init(void)
 	}
 
 	/* And register it with the kernel */
-	ret = setup_irq(timer_irq, &mfgptirq);
+	ret = request_irq(timer_irq, mfgpt_tick, flags, DRV_NAME, timer);
 	if (ret) {
 		printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
 		goto err_irq;

drivers/clocksource/timer-efm32.c

@@ -119,13 +119,6 @@ static struct efm32_clock_event_ddata clock_event_ddata = {
 	},
 };
 
-static struct irqaction efm32_clock_event_irq = {
-	.name = "efm32 clockevent",
-	.flags = IRQF_TIMER,
-	.handler = efm32_clock_event_handler,
-	.dev_id = &clock_event_ddata,
-};
-
 static int __init efm32_clocksource_init(struct device_node *np)
 {
 	struct clk *clk;
@@ -230,7 +223,8 @@ static int __init efm32_clockevent_init(struct device_node *np)
 					DIV_ROUND_CLOSEST(rate, 1024),
 					0xf, 0xffff);
 
-	ret = setup_irq(irq, &efm32_clock_event_irq);
+	ret = request_irq(irq, efm32_clock_event_handler, IRQF_TIMER,
+			  "efm32 clockevent", &clock_event_ddata);
 	if (ret) {
 		pr_err("Failed setup irq\n");
 		goto err_setup_irq;

drivers/clocksource/timer-fsl-ftm.c

@@ -176,13 +176,6 @@ static struct clock_event_device ftm_clockevent = {
 	.rating			= 300,
 };
 
-static struct irqaction ftm_timer_irq = {
-	.name		= "Freescale ftm timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= ftm_evt_interrupt,
-	.dev_id		= &ftm_clockevent,
-};
-
 static int __init ftm_clockevent_init(unsigned long freq, int irq)
 {
 	int err;
@@ -192,7 +185,8 @@ static int __init ftm_clockevent_init(unsigned long freq, int irq)
 
 	ftm_reset_counter(priv->clkevt_base);
 
-	err = setup_irq(irq, &ftm_timer_irq);
+	err = request_irq(irq, ftm_evt_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "Freescale ftm timer", &ftm_clockevent);
 	if (err) {
 		pr_err("ftm: setup irq failed: %d\n", err);
 		return err;

drivers/clocksource/timer-fttmr010.c

@@ -37,6 +37,11 @@
 #define TIMER3_MATCH2		(0x2c)
 #define TIMER_CR		(0x30)
 
+/*
+ * Control register set to clear for ast2600 only.
+ */
+#define AST2600_TIMER_CR_CLR	(0x3c)
+
 /*
  * Control register (TMC30) bit fields for fttmr010/gemini/moxart timers.
  */
@@ -97,6 +102,7 @@ struct fttmr010 {
 	bool is_aspeed;
 	u32 t1_enable_val;
 	struct clock_event_device clkevt;
+	int (*timer_shutdown)(struct clock_event_device *evt);
 #ifdef CONFIG_ARM
 	struct delay_timer delay_timer;
 #endif
@@ -140,9 +146,7 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	if (fttmr010->is_aspeed) {
 		/*
@@ -164,6 +168,16 @@ static int fttmr010_timer_set_next_event(unsigned long cycles,
 	return 0;
 }
 
+static int ast2600_timer_shutdown(struct clock_event_device *evt)
+{
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	/* Stop */
+	writel(fttmr010->t1_enable_val, fttmr010->base + AST2600_TIMER_CR_CLR);
+
+	return 0;
+}
+
 static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 {
 	struct fttmr010 *fttmr010 = to_fttmr010(evt);
@@ -183,9 +197,7 @@ static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup counter start from 0 or ~0 */
 	writel(0, fttmr010->base + TIMER1_COUNT);
@@ -211,9 +223,7 @@ static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 	u32 cr;
 
 	/* Stop */
-	cr = readl(fttmr010->base + TIMER_CR);
-	cr &= ~fttmr010->t1_enable_val;
-	writel(cr, fttmr010->base + TIMER_CR);
+	fttmr010->timer_shutdown(evt);
 
 	/* Setup timer to fire at 1/HZ intervals. */
 	if (fttmr010->is_aspeed) {
@@ -249,7 +259,21 @@ static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
+static irqreturn_t ast2600_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+	struct fttmr010 *fttmr010 = to_fttmr010(evt);
+
+	writel(0x1, fttmr010->base + TIMER_INTR_STATE);
+
+	evt->event_handler(evt);
+	return IRQ_HANDLED;
+}
+
+static int __init fttmr010_common_init(struct device_node *np,
+		bool is_aspeed,
+		int (*timer_shutdown)(struct clock_event_device *),
+		irq_handler_t irq_handler)
 {
 	struct fttmr010 *fttmr010;
 	int irq;
@@ -350,6 +374,8 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 				     fttmr010->tick_rate);
 	}
 
+	fttmr010->timer_shutdown = timer_shutdown;
+
 	/*
 	 * Setup clockevent timer (interrupt-driven) on timer 1.
 	 */
@@ -357,7 +383,7 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	writel(0, fttmr010->base + TIMER1_LOAD);
 	writel(0, fttmr010->base + TIMER1_MATCH1);
 	writel(0, fttmr010->base + TIMER1_MATCH2);
-	ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
+	ret = request_irq(irq, irq_handler, IRQF_TIMER,
 			  "FTTMR010-TIMER1", &fttmr010->clkevt);
 	if (ret) {
 		pr_err("FTTMR010-TIMER1 no IRQ\n");
@@ -370,10 +396,10 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
 		CLOCK_EVT_FEAT_ONESHOT;
 	fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
-	fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
+	fttmr010->clkevt.set_state_shutdown = fttmr010->timer_shutdown;
 	fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
 	fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
-	fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
+	fttmr010->clkevt.tick_resume = fttmr010->timer_shutdown;
 	fttmr010->clkevt.cpumask = cpumask_of(0);
 	fttmr010->clkevt.irq = irq;
 	clockevents_config_and_register(&fttmr010->clkevt,
@@ -404,14 +430,25 @@ static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 	return ret;
 }
 
+static __init int ast2600_timer_init(struct device_node *np)
+{
+	return fttmr010_common_init(np, true,
+			ast2600_timer_shutdown,
+			ast2600_timer_interrupt);
+}
+
 static __init int aspeed_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, true);
+	return fttmr010_common_init(np, true,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 static __init int fttmr010_timer_init(struct device_node *np)
 {
-	return fttmr010_common_init(np, false);
+	return fttmr010_common_init(np, false,
+			fttmr010_timer_shutdown,
+			fttmr010_timer_interrupt);
 }
 
 TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
@@ -419,3 +456,4 @@ TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
 TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
 TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
 TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);
+TIMER_OF_DECLARE(ast2600, "aspeed,ast2600-timer", ast2600_timer_init);

drivers/clocksource/timer-imx-gpt.c

@@ -67,7 +67,6 @@ struct imx_timer {
 	struct clk *clk_ipg;
 	const struct imx_gpt_data *gpt;
 	struct clock_event_device ced;
-	struct irqaction act;
 };
 
 struct imx_gpt_data {
@@ -273,7 +272,6 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
 static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 {
 	struct clock_event_device *ced = &imxtm->ced;
-	struct irqaction *act = &imxtm->act;
 
 	ced->name = "mxc_timer1";
 	ced->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_DYNIRQ;
@@ -287,12 +285,8 @@ static int __init mxc_clockevent_init(struct imx_timer *imxtm)
 	clockevents_config_and_register(ced, clk_get_rate(imxtm->clk_per),
 					0xff, 0xfffffffe);
 
-	act->name = "i.MX Timer Tick";
-	act->flags = IRQF_TIMER | IRQF_IRQPOLL;
-	act->handler = mxc_timer_interrupt;
-	act->dev_id = ced;
-
-	return setup_irq(imxtm->irq, act);
+	return request_irq(imxtm->irq, mxc_timer_interrupt,
+			   IRQF_TIMER | IRQF_IRQPOLL, "i.MX Timer Tick", ced);
 }
 
 static void imx1_gpt_setup_tctl(struct imx_timer *imxtm)

drivers/clocksource/timer-imx-sysctr.c

@@ -4,8 +4,6 @@
 
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 
 #include "timer-of.h"
 

drivers/clocksource/timer-imx-tpm.c

@@ -8,8 +8,6 @@
 #include <linux/clocksource.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/sched_clock.h>
 
 #include "timer-of.h"

drivers/clocksource/timer-integrator-ap.c

@@ -123,13 +123,6 @@ static struct clock_event_device integrator_clockevent = {
 	.rating			= 300,
 };
 
-static struct irqaction integrator_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= integrator_timer_interrupt,
-	.dev_id		= &integrator_clockevent,
-};
-
 static int integrator_clockevent_init(unsigned long inrate,
 				      void __iomem *base, int irq)
 {
@@ -149,7 +142,9 @@ static int integrator_clockevent_init(unsigned long inrate,
 	timer_reload = rate / HZ;
 	writel(ctrl, clkevt_base + TIMER_CTRL);
 
-	ret = setup_irq(irq, &integrator_timer_irq);
+	ret = request_irq(irq, integrator_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "timer",
+			  &integrator_clockevent);
 	if (ret)
 		return ret;
 

drivers/clocksource/timer-meson6.c

@@ -150,13 +150,6 @@ static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction meson6_timer_irq = {
-	.name		= "meson6_timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= meson6_timer_interrupt,
-	.dev_id		= &meson6_clockevent,
-};
-
 static int __init meson6_timer_init(struct device_node *node)
 {
 	u32 val;
@@ -194,7 +187,9 @@ static int __init meson6_timer_init(struct device_node *node)
 	/* Stop the timer A */
 	meson6_clkevt_time_stop();
 
-	ret = setup_irq(irq, &meson6_timer_irq);
+	ret = request_irq(irq, meson6_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer",
+			  &meson6_clockevent);
 	if (ret) {
 		pr_warn("failed to setup irq %d\n", irq);
 		return ret;

drivers/clocksource/timer-microchip-pit64b.c

@@ -264,6 +264,7 @@ static int __init mchp_pit64b_init_mode(struct mchp_pit64b_timer *timer,
 
 	if (!best_diff) {
 		timer->mode |= MCHP_PIT64B_MR_SGCLK;
+		clk_set_rate(timer->gclk, gclk_round);
 		goto done;
 	}
 

drivers/clocksource/timer-orion.c

@@ -114,12 +114,6 @@ static irqreturn_t orion_clkevt_irq_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction orion_clkevt_irq = {
-	.name		= "orion_event",
-	.flags		= IRQF_TIMER,
-	.handler	= orion_clkevt_irq_handler,
-};
-
 static int __init orion_timer_init(struct device_node *np)
 {
 	unsigned long rate;
@@ -172,7 +166,8 @@ static int __init orion_timer_init(struct device_node *np)
 	sched_clock_register(orion_read_sched_clock, 32, rate);
 
 	/* setup timer1 as clockevent timer */
-	ret = setup_irq(irq, &orion_clkevt_irq);
+	ret = request_irq(irq, orion_clkevt_irq_handler, IRQF_TIMER,
+			  "orion_event", NULL);
 	if (ret) {
 		pr_err("%pOFn: unable to setup irq\n", np);
 		return ret;

drivers/clocksource/timer-owl.c

@@ -135,8 +135,11 @@ static int __init owl_timer_init(struct device_node *node)
 	}
 
 	clk = of_clk_get(node, 0);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
+		pr_err("Failed to get clock for clocksource (%d)\n", ret);
+		return ret;
+	}
 
 	rate = clk_get_rate(clk);
 
@@ -144,8 +147,12 @@ static int __init owl_timer_init(struct device_node *node)
 	owl_timer_set_enabled(owl_clksrc_base, true);
 
 	sched_clock_register(owl_timer_sched_read, 32, rate);
-	clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
-			      rate, 200, 32, clocksource_mmio_readl_up);
+	ret = clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+				    rate, 200, 32, clocksource_mmio_readl_up);
+	if (ret) {
+		pr_err("Failed to register clocksource (%d)\n", ret);
+		return ret;
+	}
 
 	owl_timer_reset(owl_clkevt_base);
 

drivers/clocksource/timer-prima2.c

@@ -165,14 +165,6 @@ static struct clocksource sirfsoc_clocksource = {
 	.resume = sirfsoc_clocksource_resume,
 };
 
-static struct irqaction sirfsoc_timer_irq = {
-	.name = "sirfsoc_timer0",
-	.flags = IRQF_TIMER,
-	.irq = 0,
-	.handler = sirfsoc_timer_interrupt,
-	.dev_id = &sirfsoc_clockevent,
-};
-
 /* Overwrite weak default sched_clock with more precise one */
 static u64 notrace sirfsoc_read_sched_clock(void)
 {
@@ -190,6 +182,7 @@ static void __init sirfsoc_clockevent_init(void)
 static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 {
 	unsigned long rate;
+	unsigned int irq;
 	struct clk *clk;
 	int ret;
 
@@ -218,7 +211,7 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 		return -ENXIO;
 	}
 
-	sirfsoc_timer_irq.irq = irq_of_parse_and_map(np, 0);
+	irq = irq_of_parse_and_map(np, 0);
 
 	writel_relaxed(rate / PRIMA2_CLOCK_FREQ / 2 - 1,
 		sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
@@ -234,7 +227,8 @@ static int __init sirfsoc_prima2_timer_init(struct device_node *np)
 
 	sched_clock_register(sirfsoc_read_sched_clock, 64, PRIMA2_CLOCK_FREQ);
 
-	ret = setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq);
+	ret = request_irq(irq, sirfsoc_timer_interrupt, IRQF_TIMER,
+			  "sirfsoc_timer0", &sirfsoc_clockevent);
 	if (ret) {
 		pr_err("Failed to setup irq\n");
 		return ret;

drivers/clocksource/timer-probe.c

@@ -27,8 +27,10 @@ void __init timer_probe(void)
 
 		init_func_ret = match->data;
 
+		of_node_set_flag(np, OF_POPULATED);
 		ret = init_func_ret(np);
 		if (ret) {
+			of_node_clear_flag(np, OF_POPULATED);
 			if (ret != -EPROBE_DEFER)
 				pr_err("Failed to initialize '%pOF': %d\n", np,
 				       ret);

drivers/clocksource/timer-pxa.c

@@ -143,13 +143,6 @@ static struct clock_event_device ckevt_pxa_osmr0 = {
 	.resume			= pxa_timer_resume,
 };
 
-static struct irqaction pxa_ost0_irq = {
-	.name		= "ost0",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pxa_ost0_interrupt,
-	.dev_id		= &ckevt_pxa_osmr0,
-};
-
 static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 {
 	int ret;
@@ -161,7 +154,8 @@ static int __init pxa_timer_common_init(int irq, unsigned long clock_tick_rate)
 
 	ckevt_pxa_osmr0.cpumask = cpumask_of(0);
 
-	ret = setup_irq(irq, &pxa_ost0_irq);
+	ret = request_irq(irq, pxa_ost0_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			  "ost0", &ckevt_pxa_osmr0);
 	if (ret) {
 		pr_err("Failed to setup irq\n");
 		return ret;

drivers/clocksource/timer-sp804.c

@@ -168,13 +168,6 @@ static struct clock_event_device sp804_clockevent = {
 	.rating			= 300,
 };
 
-static struct irqaction sp804_timer_irq = {
-	.name		= "timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= sp804_timer_interrupt,
-	.dev_id		= &sp804_clockevent,
-};
-
 int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct clk *clk, const char *name)
 {
 	struct clock_event_device *evt = &sp804_clockevent;
@@ -200,7 +193,9 @@ int __init __sp804_clockevents_init(void __iomem *base, unsigned int irq, struct
 
 	writel(0, base + TIMER_CTRL);
 
-	setup_irq(irq, &sp804_timer_irq);
+	if (request_irq(irq, sp804_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			"timer", &sp804_clockevent))
+		pr_err("%s: request_irq() failed\n", "timer");
 	clockevents_config_and_register(evt, rate, 0xf, 0xffffffff);
 
 	return 0;

drivers/clocksource/timer-u300.c

@@ -330,12 +330,6 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction u300_timer_irq = {
-	.name		= "U300 Timer Tick",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= u300_timer_interrupt,
-};
-
 /*
  * Override the global weak sched_clock symbol with this
  * local implementation which uses the clocksource to get some
@@ -420,7 +414,8 @@ static int __init u300_timer_init_of(struct device_node *np)
 		u300_timer_base + U300_TIMER_APP_RGPT1);
 
 	/* Set up the IRQ handler */
-	ret = setup_irq(irq, &u300_timer_irq);
+	ret = request_irq(irq, u300_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "U300 Timer Tick", NULL);
 	if (ret)
 		return ret;
 

drivers/clocksource/timer-vf-pit.c

@@ -123,19 +123,13 @@ static struct clock_event_device clockevent_pit = {
 	.rating		= 300,
 };
 
-static struct irqaction pit_timer_irq = {
-	.name		= "VF pit timer",
-	.flags		= IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= pit_timer_interrupt,
-	.dev_id		= &clockevent_pit,
-};
-
 static int __init pit_clockevent_init(unsigned long rate, int irq)
 {
 	__raw_writel(0, clkevt_base + PITTCTRL);
 	__raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG);
 
-	BUG_ON(setup_irq(irq, &pit_timer_irq));
+	BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
+			   "VF pit timer", &clockevent_pit);
 
 	clockevent_pit.cpumask = cpumask_of(0);
 	clockevent_pit.irq = irq;

drivers/clocksource/timer-vt8500.c

@@ -101,13 +101,6 @@ static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static struct irqaction irq = {
-	.name    = "vt8500_timer",
-	.flags   = IRQF_TIMER | IRQF_IRQPOLL,
-	.handler = vt8500_timer_interrupt,
-	.dev_id  = &clockevent,
-};
-
 static int __init vt8500_timer_init(struct device_node *np)
 {
 	int timer_irq, ret;
@@ -139,7 +132,9 @@ static int __init vt8500_timer_init(struct device_node *np)
 
 	clockevent.cpumask = cpumask_of(0);
 
-	ret = setup_irq(timer_irq, &irq);
+	ret = request_irq(timer_irq, vt8500_timer_interrupt,
+			  IRQF_TIMER | IRQF_IRQPOLL, "vt8500_timer",
+			  &clockevent);
 	if (ret) {
 		pr_err("%s: setup_irq failed for %s\n", __func__,
 							clockevent.name);

drivers/clocksource/timer-zevio.c

@@ -53,7 +53,6 @@ struct zevio_timer {
 
 	struct clk *clk;
 	struct clock_event_device clkevt;
-	struct irqaction clkevt_irq;
 
 	char clocksource_name[64];
 	char clockevent_name[64];
@@ -172,12 +171,12 @@ static int __init zevio_timer_add(struct device_node *node)
 		/* Interrupt to occur when timer value matches 0 */
 		writel(0, timer->base + IO_MATCH(TIMER_MATCH));
 
-		timer->clkevt_irq.name		= timer->clockevent_name;
-		timer->clkevt_irq.handler	= zevio_timer_interrupt;
-		timer->clkevt_irq.dev_id	= timer;
-		timer->clkevt_irq.flags		= IRQF_TIMER | IRQF_IRQPOLL;
-
-		setup_irq(irqnr, &timer->clkevt_irq);
+		if (request_irq(irqnr, zevio_timer_interrupt,
+				IRQF_TIMER | IRQF_IRQPOLL,
+				timer->clockevent_name, timer)) {
+			pr_err("%s: request_irq() failed\n",
+			       timer->clockevent_name);
+		}
 
 		clockevents_config_and_register(&timer->clkevt,
 				clk_get_rate(timer->clk), 0x0001, 0xffff);

drivers/pwm/pwm-omap-dmtimer.c

@@ -183,7 +183,7 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 	if (timer_active)
 		omap->pdata->stop(omap->dm_timer);
 
-	omap->pdata->set_load(omap->dm_timer, true, load_value);
+	omap->pdata->set_load(omap->dm_timer, load_value);
 	omap->pdata->set_match(omap->dm_timer, true, match_value);
 
 	dev_dbg(chip->dev, "load value: %#08x (%d), match value: %#08x (%d)\n",
@@ -192,7 +192,8 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
 	omap->pdata->set_pwm(omap->dm_timer,
 			      pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED,
 			      true,
-			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE);
+			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+			      true);
 
 	/* If config was called while timer was running it must be reenabled. */
 	if (timer_active)
@@ -222,7 +223,8 @@ static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
 	omap->pdata->set_pwm(omap->dm_timer,
 			      polarity == PWM_POLARITY_INVERSED,
 			      true,
-			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE);
+			      PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+			      true);
 	mutex_unlock(&omap->mutex);
 
 	return 0;

include/clocksource/timer-ti-dm.h

@@ -105,17 +105,17 @@ struct omap_dm_timer {
 	void __iomem	*pend;		/* write pending */
 	void __iomem	*func_base;	/* function register base */
 
+	atomic_t enabled;
 	unsigned long rate;
 	unsigned reserved:1;
 	unsigned posted:1;
 	struct timer_regs context;
-	int (*get_context_loss_count)(struct device *);
-	int ctx_loss_count;
 	int revision;
 	u32 capability;
 	u32 errata;
 	struct platform_device *pdev;
 	struct list_head node;
+	struct notifier_block nb;
 };
 
 int omap_dm_timer_reserve_systimer(int id);

include/linux/dw_apb_timer.h

@@ -25,7 +25,6 @@ struct dw_apb_timer {
 struct dw_apb_clock_event_device {
 	struct clock_event_device		ced;
 	struct dw_apb_timer			timer;
-	struct irqaction			irqaction;
 	void					(*eoi)(struct dw_apb_timer *);
 };
 

include/linux/platform_data/dmtimer-omap.h

@@ -30,12 +30,12 @@ struct omap_dm_timer_ops {
 	int	(*stop)(struct omap_dm_timer *timer);
 	int	(*set_source)(struct omap_dm_timer *timer, int source);
 
-	int	(*set_load)(struct omap_dm_timer *timer, int autoreload,
-			    unsigned int value);
+	int	(*set_load)(struct omap_dm_timer *timer, unsigned int value);
 	int	(*set_match)(struct omap_dm_timer *timer, int enable,
 			     unsigned int match);
 	int	(*set_pwm)(struct omap_dm_timer *timer, int def_on,
-			   int toggle, int trigger);
+			   int toggle, int trigger, int autoreload);
+	int	(*get_pwm_status)(struct omap_dm_timer *timer);
 	int	(*set_prescaler)(struct omap_dm_timer *timer, int prescaler);
 
 	unsigned int (*read_counter)(struct omap_dm_timer *timer);