Merge branches 'cleanups/assorted', 'cleanups/shawn-cleanup-mxc-gpio',...

Merge branches 'cleanups/assorted', 'cleanups/shawn-cleanup-mxc-gpio', 'cleanups/troy-cleanup-iomux-v3' and 'cleanups/ukl-mx5-dynamically-allocate-devices' into imx-cleanups-for-arnd

arch/arm/mach-imx/Makefile

 obj-$(CONFIG_IMX_HAVE_DMA_V1) += dma-v1.o
 
-obj-$(CONFIG_ARCH_MX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_MACH_MX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
 
-obj-$(CONFIG_ARCH_MX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 
-obj-$(CONFIG_MACH_MX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_MACH_MX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
 obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o

arch/arm/mach-imx/mach-armadillo5x0.c

@@ -314,25 +314,19 @@ static struct mtd_partition armadillo5x0_nor_flash_partitions[] = {
 	},
 };
 
-static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
+static const struct physmap_flash_data
+		armadillo5x0_nor_flash_pdata __initconst = {
 	.width		= 2,
 	.parts		= armadillo5x0_nor_flash_partitions,
 	.nr_parts	= ARRAY_SIZE(armadillo5x0_nor_flash_partitions),
 };
 
-static struct resource armadillo5x0_nor_flash_resource = {
+static const struct resource armadillo5x0_nor_flash_resource __initconst = {
 	.flags		= IORESOURCE_MEM,
 	.start		= MX31_CS0_BASE_ADDR,
 	.end		= MX31_CS0_BASE_ADDR + SZ_64M - 1,
 };
 
-static struct platform_device armadillo5x0_nor_flash = {
-	.name			= "physmap-flash",
-	.id			= -1,
-	.num_resources		= 1,
-	.resource		= &armadillo5x0_nor_flash_resource,
-};
-
 /*
  * FB support
  */
@@ -514,8 +508,10 @@ static void __init armadillo5x0_init(void)
 	imx31_add_mx3_sdc_fb(&mx3fb_pdata);
 
 	/* Register NOR Flash */
-	mxc_register_device(&armadillo5x0_nor_flash,
-			    &armadillo5x0_nor_flash_pdata);
+	platform_device_register_resndata(NULL, "physmap-flash", -1,
+			&armadillo5x0_nor_flash_resource, 1,
+			&armadillo5x0_nor_flash_pdata,
+			sizeof(armadillo5x0_nor_flash_pdata));
 
 	/* Register NAND Flash */
 	imx31_add_mxc_nand(&armadillo5x0_nand_board_info);

arch/arm/mach-imx/mach-cpuimx35.c

@@ -66,7 +66,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x48),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 

arch/arm/mach-imx/mach-mx1ads.c

@@ -68,23 +68,16 @@ static const struct imxuart_platform_data uart1_pdata __initconst = {
  * Physmap flash
  */
 
-static struct physmap_flash_data mx1ads_flash_data = {
+static const struct physmap_flash_data mx1ads_flash_data __initconst = {
 	.width		= 4,		/* bankwidth in bytes */
 };
 
-static struct resource flash_resource = {
+static const struct resource flash_resource __initconst = {
 	.start	= MX1_CS0_PHYS,
 	.end	= MX1_CS0_PHYS + SZ_32M - 1,
 	.flags	= IORESOURCE_MEM,
 };
 
-static struct platform_device flash_device = {
-	.name	= "physmap-flash",
-	.id	= 0,
-	.resource = &flash_resource,
-	.num_resources = 1,
-};
-
 /*
  * I2C
  */
@@ -125,7 +118,9 @@ static void __init mx1ads_init(void)
 	imx1_add_imx_uart1(&uart1_pdata);
 
 	/* Physmap flash */
-	mxc_register_device(&flash_device, &mx1ads_flash_data);
+	platform_device_register_resndata(NULL, "physmap-flash", 0,
+			&flash_resource, 1,
+			&mx1ads_flash_data, sizeof(mx1ads_flash_data));
 
 	/* I2C */
 	i2c_register_board_info(0, mx1ads_i2c_devices,

arch/arm/mach-imx/mach-mx27_3ds.c

@@ -359,7 +359,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = {
 		.bus_num	= 1,
 		.chip_select	= 0, /* SS0 */
 		.platform_data	= &mc13783_pdata,
-		.irq = gpio_to_irq(PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(PMIC_INT),
 		.mode = SPI_CS_HIGH,
 	}, {
 		.modalias	= "l4f00242t03",

arch/arm/mach-imx/mach-vpr200.c

@@ -162,7 +162,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
 	}, {
 		I2C_BOARD_INFO("mc13892", 0x08),
 		.platform_data = &vpr200_pmic,
-		.irq = gpio_to_irq(GPIO_PMIC_INT),
+		.irq = IMX_GPIO_TO_IRQ(GPIO_PMIC_INT),
 	}
 };
 

arch/arm/mach-mx5/Kconfig

@@ -52,7 +52,6 @@ config MACH_MX50_RDP
 	select IMX_HAVE_PLATFORM_IMX_UART
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
-	select IMX_HAVE_PLATFORM_FEC
 	help
 	  Include support for MX50 reference design platform (RDP) board. This
 	  includes specific configurations for the board and its peripherals.
@@ -65,9 +64,11 @@ comment "i.MX51 machines:"
 config MACH_MX51_BABBAGE
 	bool "Support MX51 BABBAGE platforms"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -91,8 +92,10 @@ config MACH_MX51_3DS
 config MACH_EUKREA_CPUIMX51
 	bool "Support Eukrea CPUIMX51 module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
@@ -119,10 +122,12 @@ endchoice
 config MACH_EUKREA_CPUIMX51SD
 	bool "Support Eukrea CPUIMX51SD module"
 	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SPI_IMX
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  Include support for Eukrea CPUIMX51SD platform. This includes
 	  specific configurations for the module and its peripherals.
@@ -147,6 +152,7 @@ config MX51_EFIKA_COMMON
 	bool
 	select SOC_IMX51
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 	select IMX_HAVE_PLATFORM_SPI_IMX
 	select MXC_ULPI if USB_ULPI

arch/arm/mach-mx5/Makefile

@@ -3,7 +3,7 @@
 #
 
 # Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o
+obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
 obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_PM) += pm-imx5.o

arch/arm/mach-mx5/board-cpuimx51.c

@@ -22,21 +22,18 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 
 #include <mach/eukrea-baseboards.h>
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define CPUIMX51_USBH1_STP	IMX_GPIO_NR(1, 27)
 #define CPUIMX51_QUARTA_GPIO	IMX_GPIO_NR(3, 28)
@@ -57,7 +54,7 @@
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -65,7 +62,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -73,7 +70,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -81,7 +78,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
+		.irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
@@ -167,7 +164,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -190,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -206,17 +203,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -270,12 +267,12 @@ static void __init eukrea_cpuimx51_init(void)
 				ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
 	eukrea_mbimx51_baseboard_init();

arch/arm/mach-mx5/board-cpuimx51sd.c

@@ -22,7 +22,6 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/can/platform/mcp251x.h>
@@ -32,14 +31,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define USBH1_RST		IMX_GPIO_NR(2, 28)
@@ -108,7 +105,7 @@ static iomux_v3_cfg_t eukrea_cpuimx51sd_pads[] = {
 
 	/* Touchscreen */
 	/* IRQ */
-	_MX51_PAD_GPIO_NAND__GPIO_NAND | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO_NAND__GPIO_NAND, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };
@@ -129,7 +126,7 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = {
 		I2C_BOARD_INFO("tsc2007", 0x49),
 		.type		= "tsc2007",
 		.platform_data	= &tsc2007_info,
-		.irq		= gpio_to_irq(TSC2007_IRQGPIO),
+		.irq		= IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
 	},
 };
 
@@ -149,7 +146,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -172,7 +169,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -189,17 +186,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -245,7 +242,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = {
 		.mode		= SPI_MODE_0,
 		.chip_select     = 0,
 		.platform_data   = &mcp251x_info,
-		.irq             = gpio_to_irq(CAN_IRQGPIO)
+		.irq             = IMX_GPIO_TO_IRQ(CAN_IRQGPIO)
 	},
 };
 
@@ -303,17 +300,17 @@ static void __init eukrea_cpuimx51sd_init(void)
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_request(USBH1_RST, "usb_rst");
 	gpio_direction_output(USBH1_RST, 0);
 	msleep(20);
 	gpio_set_value(USBH1_RST, 1);
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 
 #ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
 	eukrea_mbimxsd51_baseboard_init();

arch/arm/mach-mx5/board-mx51_3ds.c

@@ -25,7 +25,6 @@
 #include <mach/3ds_debugboard.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define EXPIO_PARENT_INT	gpio_to_irq(IMX_GPIO_NR(1, 6))
 #define MX51_3DS_ECSPI2_CS	(GPIO_PORTC + 28)

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -24,14 +24,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "cpu_op-mx51.h"
 
 #define BABBAGE_USB_HUB_RESET	IMX_GPIO_NR(1, 7)
@@ -176,7 +174,7 @@ static const struct imxi2c_platform_data babbage_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
-static struct imxi2c_platform_data babbage_hsi2c_data = {
+static const struct imxi2c_platform_data babbage_hsi2c_data __initconst = {
 	.bitrate = 400000,
 };
 
@@ -249,7 +247,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -272,7 +270,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
@@ -288,17 +286,17 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 			MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init		= initialize_otg_port,
 	.portsc	= MXC_EHCI_UTMI_16BIT,
 };
 
-static struct fsl_usb2_platform_data usb_pdata = {
+static const struct fsl_usb2_platform_data usb_pdata __initconst = {
 	.operating_mode	= FSL_USB2_DR_DEVICE,
 	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static const struct mxc_usbh_platform_data usbh1_config __initconst = {
 	.init		= initialize_usbh1_port,
 	.portsc	= MXC_EHCI_MODE_ULPI,
 };
@@ -357,8 +355,8 @@ static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = {
 static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
-	iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 |
-		MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
 
 	imx51_soc_init();
 
@@ -381,17 +379,17 @@ static void __init mx51_babbage_init(void)
 
 	imx51_add_imx_i2c(0, &babbage_i2c_data);
 	imx51_add_imx_i2c(1, &babbage_i2c_data);
-	mxc_register_device(&mxc_hsi2c_device, &babbage_hsi2c_data);
+	imx51_add_hsi2c(&babbage_hsi2c_data);
 
 	if (otg_mode_host)
-		mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+		imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	else {
 		initialize_otg_port(NULL);
-		mxc_register_device(&mxc_usbdr_udc_device, &usb_pdata);
+		imx51_add_fsl_usb2_udc(&usb_pdata);
 	}
 
 	gpio_usbh1_active();
-	mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+	imx51_add_mxc_ehci_hs(1, &usbh1_config);
 	/* setback USBH1_STP to be function */
 	mxc_iomux_v3_setup_pad(usbh1stp);
 	babbage_usbhub_reset();

arch/arm/mach-mx5/board-mx51_efikamx.c

@@ -32,14 +32,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKAMX_PCBID0		IMX_GPIO_NR(3, 16)

arch/arm/mach-mx5/board-mx51_efikasb.c

@@ -35,14 +35,12 @@
 #include <mach/hardware.h>
 #include <mach/iomux-mx51.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 
 #define EFIKASB_USBH2_STP	IMX_GPIO_NR(2, 20)
@@ -119,7 +117,7 @@ static int initialize_usbh2_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh2_config = {
+static struct mxc_usbh_platform_data usbh2_config __initdata = {
 	.init   = initialize_usbh2_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -129,7 +127,7 @@ static void __init mx51_efikasb_usb(void)
 	usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 	if (usbh2_config.otg)
-		mxc_register_device(&mxc_usbh2_device, &usbh2_config);
+		imx51_add_mxc_ehci_hs(2, &usbh2_config);
 }
 
 static const struct gpio_led mx51_efikasb_leds[] __initconst = {

arch/arm/mach-mx5/board-mx53_ard.c

@@ -134,8 +134,8 @@ static struct resource ard_smsc911x_resources[] = {
 		.flags = IORESOURCE_MEM,
 	},
 	{
-		.start =  gpio_to_irq(ARD_ETHERNET_INT_B),
-		.end =  gpio_to_irq(ARD_ETHERNET_INT_B),
+		.start =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
+		.end =  IMX_GPIO_TO_IRQ(ARD_ETHERNET_INT_B),
 		.flags = IORESOURCE_IRQ,
 	},
 };

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1568,7 +1568,7 @@ int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
 
 	/* System timer */
 	mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
-		MX51_MXC_INT_GPT);
+		MX51_INT_GPT);
 	return 0;
 }
 

arch/arm/mach-mx5/devices-imx51.h

@@ -13,9 +13,15 @@ extern const struct imx_fec_data imx51_fec_data;
 #define imx51_add_fec(pdata)	\
 	imx_add_fec(&imx51_fec_data, pdata)
 
+extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
+#define imx51_add_fsl_usb2_udc(pdata)	\
+	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
+
 extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
 #define imx51_add_imx_i2c(id, pdata)	\
 	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
+#define imx51_add_hsi2c(pdata)	\
+	imx51_add_imx_i2c(2, pdata)
 
 extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
 #define imx51_add_imx_ssi(id, pdata)	\
@@ -25,6 +31,13 @@ extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
 #define imx51_add_imx_uart(id, pdata)	\
 	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
 
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
+#define imx51_add_mxc_ehci_otg(pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
+extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
+#define imx51_add_mxc_ehci_hs(id, pdata)	\
+	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
+
 extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
 #define imx51_add_mxc_nand(pdata)	\
 	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)

arch/arm/mach-mx5/devices.c

-/*
- * Copyright 2009 Amit Kucheria <amit.kucheria@canonical.com>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <mach/hardware.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
-
-static struct resource mxc_hsi2c_resources[] = {
-	{
-		.start = MX51_HSI2C_DMA_BASE_ADDR,
-		.end = MX51_HSI2C_DMA_BASE_ADDR + SZ_16K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_HS_I2C,
-		.end = MX51_MXC_INT_HS_I2C,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_hsi2c_device = {
-	.name = "imx-i2c",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(mxc_hsi2c_resources),
-	.resource = mxc_hsi2c_resources
-};
-
-static u64 usb_dma_mask = DMA_BIT_MASK(32);
-
-static struct resource usbotg_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR,
-		.end = MX51_OTG_BASE_ADDR + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_OTG,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-/* OTG gadget device */
-struct platform_device mxc_usbdr_udc_device = {
-	.name		= "fsl-usb2-udc",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(usbotg_resources),
-	.resource	= usbotg_resources,
-	.dev		= {
-		.dma_mask		= &usb_dma_mask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-};
-
-struct platform_device mxc_usbdr_host_device = {
-	.name = "mxc-ehci",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(usbotg_resources),
-	.resource = usbotg_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh1_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x200,
-		.end = MX51_OTG_BASE_ADDR + 0x200 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H1,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh1_device = {
-	.name = "mxc-ehci",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(usbh1_resources),
-	.resource = usbh1_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};
-
-static struct resource usbh2_resources[] = {
-	{
-		.start = MX51_OTG_BASE_ADDR + 0x400,
-		.end = MX51_OTG_BASE_ADDR + 0x400 + 0x1ff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = MX51_MXC_INT_USB_H2,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device mxc_usbh2_device = {
-	.name = "mxc-ehci",
-	.id = 2,
-	.num_resources = ARRAY_SIZE(usbh2_resources),
-	.resource = usbh2_resources,
-	.dev = {
-		.dma_mask = &usb_dma_mask,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-};

arch/arm/mach-mx5/devices.h

-extern struct platform_device mxc_usbdr_host_device;
-extern struct platform_device mxc_usbh1_device;
-extern struct platform_device mxc_usbh2_device;
-extern struct platform_device mxc_usbdr_udc_device;
-extern struct platform_device mxc_hsi2c_device;

arch/arm/mach-mx5/ehci.c

@@ -52,7 +52,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags)
 	void __iomem *usbother_base;
 	int ret = 0;
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base) {
 		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
 		return -ENOMEM;

arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c

@@ -28,7 +28,6 @@
 #include <asm/mach/arch.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 #define MBIMX51_TSC2007_GPIO	IMX_GPIO_NR(3, 30)
 #define MBIMX51_LED0		IMX_GPIO_NR(3, 5)
@@ -160,7 +159,7 @@ struct tsc2007_platform_data tsc2007_data = {
 static struct i2c_board_info mbimx51_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tsc2007", 0x49),
-		.irq  = gpio_to_irq(MBIMX51_TSC2007_GPIO),
+		.irq  = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO),
 		.platform_data = &tsc2007_data,
 	}, {
 		I2C_BOARD_INFO("tlv320aic23", 0x1a),

arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c

@@ -24,7 +24,6 @@
 
 #include <linux/gpio.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
@@ -41,13 +40,12 @@
 #include <mach/audmux.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 
 static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	/* LED */
 	MX51_PAD_NANDF_D10__GPIO3_30,
 	/* SWITCH */
-	_MX51_PAD_NANDF_D9__GPIO3_31 | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_NANDF_D9__GPIO3_31, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 	/* UART2 */
@@ -66,7 +64,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
 	MX51_PAD_SD1_DATA2__SD1_DATA2,
 	MX51_PAD_SD1_DATA3__SD1_DATA3,
 	/* SD1 CD */
-	_MX51_PAD_GPIO1_0__SD1_CD | MUX_PAD_CTRL(PAD_CTL_PUS_22K_UP |
+	NEW_PAD_CTRL(MX51_PAD_GPIO1_0__SD1_CD, PAD_CTL_PUS_22K_UP |
 			PAD_CTL_PKE | PAD_CTL_SRE_FAST |
 			PAD_CTL_DSE_HIGH | PAD_CTL_PUE | PAD_CTL_HYS),
 };

arch/arm/mach-mx5/mm.c

@@ -141,10 +141,10 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
 void __init imx51_soc_init(void)
 {
 	/* i.mx51 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_INT_GPIO1_LOW, MX51_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_INT_GPIO2_LOW, MX51_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
 
 	/* i.mx51 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);

arch/arm/mach-mx5/mx51_efika.c

@@ -34,14 +34,12 @@
 #include <linux/usb/ulpi.h>
 #include <mach/ulpi.h>
 
-#include <asm/irq.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
 #include "devices-imx51.h"
-#include "devices.h"
 #include "efika.h"
 #include "cpu_op-mx51.h"
 
@@ -133,7 +131,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	u32 v;
 	void __iomem *usb_base;
 	void __iomem *usbother_base;
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	if (!usb_base)
 		return -ENOMEM;
 	usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
@@ -150,7 +148,7 @@ static int initialize_otg_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY);
 }
 
-static struct mxc_usbh_platform_data dr_utmi_config = {
+static const struct mxc_usbh_platform_data dr_utmi_config __initconst = {
 	.init   = initialize_otg_port,
 	.portsc = MXC_EHCI_UTMI_16BIT,
 };
@@ -170,7 +168,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	gpio_set_value(EFIKAMX_USBH1_STP, 1);
 	msleep(1);
 
-	usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
+	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
 	socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET);
 
 	/* The clock for the USBH1 ULPI port will come externally */
@@ -189,7 +187,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
 	return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
 }
 
-static struct mxc_usbh_platform_data usbh1_config = {
+static struct mxc_usbh_platform_data usbh1_config __initdata = {
 	.init   = initialize_usbh1_port,
 	.portsc = MXC_EHCI_MODE_ULPI,
 };
@@ -217,9 +215,9 @@ static void __init mx51_efika_usb(void)
 	usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
 			ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
 
-	mxc_register_device(&mxc_usbdr_host_device, &dr_utmi_config);
+	imx51_add_mxc_ehci_otg(&dr_utmi_config);
 	if (usbh1_config.otg)
-		mxc_register_device(&mxc_usbh1_device, &usbh1_config);
+		imx51_add_mxc_ehci_hs(1, &usbh1_config);
 }
 
 static struct mtd_partition mx51_efika_spi_nor_partitions[] = {
@@ -589,7 +587,7 @@ static struct spi_board_info mx51_efika_spi_board_info[] __initdata = {
 		.bus_num = 0,
 		.chip_select = 0,
 		.platform_data = &mx51_efika_mc13892_data,
-		.irq = gpio_to_irq(EFIKAMX_PMIC),
+		.irq = IMX_GPIO_TO_IRQ(EFIKAMX_PMIC),
 	},
 };
 
@@ -631,4 +629,3 @@ void __init efika_board_common_init(void)
 	get_cpu_op = mx51_get_cpu_op;
 #endif
 }
-

arch/arm/mach-mxs/include/mach/gpio.h

@@ -22,14 +22,10 @@
 
 #include <asm-generic/gpio.h>
 
-#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
-
 /* use gpiolib dispatchers */
 #define gpio_get_value		__gpio_get_value
 #define gpio_set_value		__gpio_set_value
 #define gpio_cansleep		__gpio_cansleep
 #define gpio_to_irq		__gpio_to_irq
 
-#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
-
 #endif /* __MACH_MXS_GPIO_H__ */

arch/arm/mach-mxs/include/mach/mxs.h

@@ -86,6 +86,8 @@
 	.type = _type,							\
 }
 
+#define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
+
 #define MXS_SET_ADDR		0x4
 #define MXS_CLR_ADDR		0x8
 #define MXS_TOG_ADDR		0xc

arch/arm/mach-mxs/mach-mx23evk.c

@@ -15,7 +15,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>

arch/arm/mach-mxs/mach-mx28evk.c

@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
-#include <linux/irq.h>
 #include <linux/clk.h>
 
 #include <asm/mach-types.h>

arch/arm/mach-mxs/mach-stmp378x_devb.c

@@ -19,7 +19,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/irq.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach-types.h>

arch/arm/plat-mxc/audmux-v2.c

@@ -187,18 +187,11 @@ EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
 static int mxc_audmux_v2_init(void)
 {
 	int ret;
-#if defined(CONFIG_ARCH_MX5)
 	if (cpu_is_mx51()) {
 		audmux_base = MX51_IO_ADDRESS(MX51_AUDMUX_BASE_ADDR);
-		ret = 0;
-		return ret;
-	}
-#endif
-#if defined(CONFIG_ARCH_MX3)
-	if (cpu_is_mx31())
+	} else if (cpu_is_mx31()) {
 		audmux_base = MX31_IO_ADDRESS(MX31_AUDMUX_BASE_ADDR);
-
-	else if (cpu_is_mx35()) {
+	} else if (cpu_is_mx35()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
 			ret = PTR_ERR(audmux_clk);
@@ -207,10 +200,7 @@ static int mxc_audmux_v2_init(void)
 			return ret;
 		}
 		audmux_base = MX35_IO_ADDRESS(MX35_AUDMUX_BASE_ADDR);
-	}
-#endif
-#if defined(CONFIG_SOC_IMX25)
-	if (cpu_is_mx25()) {
+	} else if (cpu_is_mx25()) {
 		audmux_clk = clk_get(NULL, "audmux");
 		if (IS_ERR(audmux_clk)) {
 			ret = PTR_ERR(audmux_clk);
@@ -220,7 +210,7 @@ static int mxc_audmux_v2_init(void)
 		}
 		audmux_base = MX25_IO_ADDRESS(MX25_AUDMUX_BASE_ADDR);
 	}
-#endif /* if defined(CONFIG_SOC_IMX25) */
+
 	audmux_debugfs_init();
 
 	return 0;

arch/arm/plat-mxc/devices.c

@@ -23,20 +23,6 @@
 #include <linux/platform_device.h>
 #include <mach/common.h>
 
-int __init mxc_register_device(struct platform_device *pdev, void *data)
-{
-	int ret;
-
-	pdev->dev.platform_data = data;
-
-	ret = platform_device_register(pdev);
-	if (ret)
-		pr_debug("Unable to register platform device '%s': %d\n",
-			 pdev->name, ret);
-
-	return ret;
-}
-
 struct platform_device *__init imx_add_platform_device_dmamask(
 		const char *name, int id,
 		const struct resource *res, unsigned int num_resources,

arch/arm/plat-mxc/devices/Kconfig

 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	select HAVE_CAN_FLEXCAN if CAN

arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c

@@ -36,6 +36,11 @@ const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
 	imx_fsl_usb2_udc_data_entry_single(MX35);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
+#ifdef CONFIG_SOC_IMX51
+const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
+	imx_fsl_usb2_udc_data_entry_single(MX51);
+#endif
+
 struct platform_device *__init imx_add_fsl_usb2_udc(
 		const struct imx_fsl_usb2_udc_data *data,
 		const struct fsl_usb2_platform_data *pdata)

arch/arm/plat-mxc/devices/platform-imx-i2c.c

@@ -85,6 +85,12 @@ const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 	imx_imx_i2c_data_entry(MX51, _id, _hwid, SZ_4K)
 	imx51_imx_i2c_data_entry(0, 1),
 	imx51_imx_i2c_data_entry(1, 2),
+	{
+		.id = 2,
+		.iobase = MX51_HSI2C_DMA_BASE_ADDR,
+		.iosize = SZ_16K,
+		.irq = MX51_INT_HS_I2C,
+	},
 };
 #endif /* ifdef CONFIG_SOC_IMX51 */
 

arch/arm/plat-mxc/devices/platform-mxc-ehci.c

@@ -49,6 +49,15 @@ const struct imx_mxc_ehci_data imx35_mxc_ehci_hs_data __initconst =
 	imx_mxc_ehci_data_entry_single(MX35, 1, HS);
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
+#ifdef CONFIG_SOC_IMX51
+const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data __initconst =
+	imx_mxc_ehci_data_entry_single(MX51, 0, OTG);
+const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[] __initconst = {
+	imx_mxc_ehci_data_entry_single(MX51, 1, HS1),
+	imx_mxc_ehci_data_entry_single(MX51, 2, HS2),
+};
+#endif /* ifdef CONFIG_SOC_IMX51 */
+
 struct platform_device *__init imx_add_mxc_ehci(
 		const struct imx_mxc_ehci_data *data,
 		const struct mxc_usbh_platform_data *pdata)

arch/arm/plat-mxc/include/mach/common.h

@@ -66,7 +66,6 @@ extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
 			unsigned long ckih1, unsigned long ckih2);
 extern struct platform_device *mxc_register_gpio(char *name, int id,
 	resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
-extern int mxc_register_device(struct platform_device *pdev, void *data);
 extern void mxc_set_cpu_type(unsigned int type);
 extern void mxc_arch_reset_init(void __iomem *);
 extern void mx51_efikamx_reset(void);

arch/arm/plat-mxc/include/mach/gpio.h

@@ -23,17 +23,10 @@
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
-
-/* There's a off-by-one betweem the gpio bank number and the gpiochip */
-/* range e.g. GPIO_1_5 is gpio 5 under linux */
-#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
-
 /* use gpiolib dispatchers */
 #define gpio_get_value		__gpio_get_value
 #define gpio_set_value		__gpio_set_value
 #define gpio_cansleep		__gpio_cansleep
-
-#define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
-#define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
+#define gpio_to_irq		__gpio_to_irq
 
 #endif

arch/arm/plat-mxc/include/mach/hardware.h

@@ -116,4 +116,10 @@
 	.type = _type,							\
 }
 
+/* There's a off-by-one betweem the gpio bank number and the gpiochip */
+/* range e.g. GPIO_1_5 is gpio 5 under linux */
+#define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
+
+#define IMX_GPIO_TO_IRQ(gpio)	(MXC_GPIO_IRQ_START + (gpio))
+
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */

arch/arm/plat-mxc/include/mach/iomux-v3.h

@@ -80,6 +80,7 @@ typedef u64 iomux_v3_cfg_t;
 		((iomux_v3_cfg_t)(_sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT) | \
 		((iomux_v3_cfg_t)(_sel_input) << MUX_SEL_INPUT_SHIFT))
 
+#define NEW_PAD_CTRL(cfg, pad)	(((cfg) & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(pad))
 /*
  * Use to set PAD control
  */

arch/arm/plat-mxc/include/mach/mx51.h

@@ -55,7 +55,10 @@
 #define MX51_AIPS1_BASE_ADDR		0x73f00000
 #define MX51_AIPS1_SIZE			SZ_1M
 
-#define MX51_OTG_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x80000)
+#define MX51_USB_OTG_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0000)
+#define MX51_USB_HS1_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0200)
+#define MX51_USB_HS2_BASE_ADDR		(MX51_USB_BASE_ADDR + 0x0400)
 #define MX51_GPIO1_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x84000)
 #define MX51_GPIO2_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x88000)
 #define MX51_GPIO3_BASE_ADDR		(MX51_AIPS1_BASE_ADDR + 0x8c000)
@@ -240,110 +243,110 @@
 /*
  * Interrupt numbers
  */
-#define MX51_MXC_INT_BASE		0
-#define MX51_MXC_INT_RESV0		0
+#define MX51_INT_BASE			0
+#define MX51_INT_RESV0			0
 #define MX51_INT_ESDHC1			1
 #define MX51_INT_ESDHC2			2
 #define MX51_INT_ESDHC3			3
 #define MX51_INT_ESDHC4			4
-#define MX51_MXC_INT_RESV5		5
+#define MX51_INT_RESV5			5
 #define MX51_INT_SDMA			6
-#define MX51_MXC_INT_IOMUX		7
+#define MX51_INT_IOMUX			7
 #define MX51_INT_NFC			8
-#define MX51_MXC_INT_VPU		9
+#define MX51_INT_VPU			9
 #define MX51_INT_IPU_ERR		10
 #define MX51_INT_IPU_SYN		11
-#define MX51_MXC_INT_GPU		12
-#define MX51_MXC_INT_RESV13		13
-#define MX51_MXC_INT_USB_H1		14
-#define MX51_MXC_INT_EMI		15
-#define MX51_MXC_INT_USB_H2		16
-#define MX51_MXC_INT_USB_H3		17
-#define MX51_MXC_INT_USB_OTG		18
-#define MX51_MXC_INT_SAHARA_H0		19
-#define MX51_MXC_INT_SAHARA_H1		20
-#define MX51_MXC_INT_SCC_SMN		21
-#define MX51_MXC_INT_SCC_STZ		22
-#define MX51_MXC_INT_SCC_SCM		23
-#define MX51_MXC_INT_SRTC_NTZ		24
-#define MX51_MXC_INT_SRTC_TZ		25
-#define MX51_MXC_INT_RTIC		26
-#define MX51_MXC_INT_CSU		27
-#define MX51_MXC_INT_SLIM_B		28
+#define MX51_INT_GPU			12
+#define MX51_INT_RESV13			13
+#define MX51_INT_USB_HS1		14
+#define MX51_INT_EMI			15
+#define MX51_INT_USB_HS2		16
+#define MX51_INT_USB_HS3		17
+#define MX51_INT_USB_OTG		18
+#define MX51_INT_SAHARA_H0		19
+#define MX51_INT_SAHARA_H1		20
+#define MX51_INT_SCC_SMN		21
+#define MX51_INT_SCC_STZ		22
+#define MX51_INT_SCC_SCM		23
+#define MX51_INT_SRTC_NTZ		24
+#define MX51_INT_SRTC_TZ		25
+#define MX51_INT_RTIC			26
+#define MX51_INT_CSU			27
+#define MX51_INT_SLIM_B			28
 #define MX51_INT_SSI1			29
 #define MX51_INT_SSI2			30
 #define MX51_INT_UART1			31
 #define MX51_INT_UART2			32
 #define MX51_INT_UART3			33
-#define MX51_MXC_INT_RESV34		34
-#define MX51_MXC_INT_RESV35		35
+#define MX51_INT_RESV34			34
+#define MX51_INT_RESV35			35
 #define MX51_INT_ECSPI1			36
 #define MX51_INT_ECSPI2			37
 #define MX51_INT_CSPI			38
-#define MX51_MXC_INT_GPT		39
-#define MX51_MXC_INT_EPIT1		40
-#define MX51_MXC_INT_EPIT2		41
-#define MX51_MXC_INT_GPIO1_INT7		42
-#define MX51_MXC_INT_GPIO1_INT6		43
-#define MX51_MXC_INT_GPIO1_INT5		44
-#define MX51_MXC_INT_GPIO1_INT4		45
-#define MX51_MXC_INT_GPIO1_INT3		46
-#define MX51_MXC_INT_GPIO1_INT2		47
-#define MX51_MXC_INT_GPIO1_INT1		48
-#define MX51_MXC_INT_GPIO1_INT0		49
-#define MX51_MXC_INT_GPIO1_LOW		50
-#define MX51_MXC_INT_GPIO1_HIGH		51
-#define MX51_MXC_INT_GPIO2_LOW		52
-#define MX51_MXC_INT_GPIO2_HIGH		53
-#define MX51_MXC_INT_GPIO3_LOW		54
-#define MX51_MXC_INT_GPIO3_HIGH		55
-#define MX51_MXC_INT_GPIO4_LOW		56
-#define MX51_MXC_INT_GPIO4_HIGH		57
-#define MX51_MXC_INT_WDOG1		58
-#define MX51_MXC_INT_WDOG2		59
+#define MX51_INT_GPT			39
+#define MX51_INT_EPIT1			40
+#define MX51_INT_EPIT2			41
+#define MX51_INT_GPIO1_INT7		42
+#define MX51_INT_GPIO1_INT6		43
+#define MX51_INT_GPIO1_INT5		44
+#define MX51_INT_GPIO1_INT4		45
+#define MX51_INT_GPIO1_INT3		46
+#define MX51_INT_GPIO1_INT2		47
+#define MX51_INT_GPIO1_INT1		48
+#define MX51_INT_GPIO1_INT0		49
+#define MX51_INT_GPIO1_LOW		50
+#define MX51_INT_GPIO1_HIGH		51
+#define MX51_INT_GPIO2_LOW		52
+#define MX51_INT_GPIO2_HIGH		53
+#define MX51_INT_GPIO3_LOW		54
+#define MX51_INT_GPIO3_HIGH		55
+#define MX51_INT_GPIO4_LOW		56
+#define MX51_INT_GPIO4_HIGH		57
+#define MX51_INT_WDOG1			58
+#define MX51_INT_WDOG2			59
 #define MX51_INT_KPP			60
 #define MX51_INT_PWM1			61
 #define MX51_INT_I2C1			62
 #define MX51_INT_I2C2			63
-#define MX51_MXC_INT_HS_I2C		64
-#define MX51_MXC_INT_RESV65		65
-#define MX51_MXC_INT_RESV66		66
-#define MX51_MXC_INT_SIM_IPB		67
-#define MX51_MXC_INT_SIM_DAT		68
-#define MX51_MXC_INT_IIM		69
-#define MX51_MXC_INT_ATA		70
-#define MX51_MXC_INT_CCM1		71
-#define MX51_MXC_INT_CCM2		72
-#define MX51_MXC_INT_GPC1		73
-#define MX51_MXC_INT_GPC2		74
-#define MX51_MXC_INT_SRC		75
-#define MX51_MXC_INT_NM			76
-#define MX51_MXC_INT_PMU		77
-#define MX51_MXC_INT_CTI_IRQ		78
-#define MX51_MXC_INT_CTI1_TG0		79
-#define MX51_MXC_INT_CTI1_TG1		80
-#define MX51_MXC_INT_MCG_ERR		81
-#define MX51_MXC_INT_MCG_TMR		82
-#define MX51_MXC_INT_MCG_FUNC		83
-#define MX51_MXC_INT_GPU2_IRQ		84
-#define MX51_MXC_INT_GPU2_BUSY		85
-#define MX51_MXC_INT_RESV86		86
+#define MX51_INT_HS_I2C			64
+#define MX51_INT_RESV65			65
+#define MX51_INT_RESV66			66
+#define MX51_INT_SIM_IPB		67
+#define MX51_INT_SIM_DAT		68
+#define MX51_INT_IIM			69
+#define MX51_INT_ATA			70
+#define MX51_INT_CCM1			71
+#define MX51_INT_CCM2			72
+#define MX51_INT_GPC1				73
+#define MX51_INT_GPC2			74
+#define MX51_INT_SRC			75
+#define MX51_INT_NM			76
+#define MX51_INT_PMU			77
+#define MX51_INT_CTI_IRQ		78
+#define MX51_INT_CTI1_TG0		79
+#define MX51_INT_CTI1_TG1		80
+#define MX51_INT_MCG_ERR		81
+#define MX51_INT_MCG_TMR		82
+#define MX51_INT_MCG_FUNC		83
+#define MX51_INT_GPU2_IRQ		84
+#define MX51_INT_GPU2_BUSY		85
+#define MX51_INT_RESV86			86
 #define MX51_INT_FEC			87
-#define MX51_MXC_INT_OWIRE		88
-#define MX51_MXC_INT_CTI1_TG2		89
-#define MX51_MXC_INT_SJC		90
-#define MX51_MXC_INT_SPDIF		91
-#define MX51_MXC_INT_TVE		92
-#define MX51_MXC_INT_FIRI		93
+#define MX51_INT_OWIRE			88
+#define MX51_INT_CTI1_TG2		89
+#define MX51_INT_SJC			90
+#define MX51_INT_SPDIF			91
+#define MX51_INT_TVE			92
+#define MX51_INT_FIRI			93
 #define MX51_INT_PWM2			94
-#define MX51_MXC_INT_SLIM_EXP		95
+#define MX51_INT_SLIM_EXP		95
 #define MX51_INT_SSI3			96
-#define MX51_MXC_INT_EMI_BOOT		97
-#define MX51_MXC_INT_CTI1_TG3		98
-#define MX51_MXC_INT_SMC_RX		99
-#define MX51_MXC_INT_VPU_IDLE		100
-#define MX51_MXC_INT_EMI_NFC		101
-#define MX51_MXC_INT_GPU_IDLE		102
+#define MX51_INT_EMI_BOOT		97
+#define MX51_INT_CTI1_TG3		98
+#define MX51_INT_SMC_RX			99
+#define MX51_INT_VPU_IDLE		100
+#define MX51_INT_EMI_NFC		101
+#define MX51_INT_GPU_IDLE		102
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 extern int mx51_revision(void);

drivers/gpio/gpio-mxc.c

@@ -31,6 +31,8 @@
 #include <linux/of_device.h>
 #include <asm-generic/bug.h>
 
+#define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
+
 enum mxc_gpio_hwtype {
 	IMX1_GPIO,	/* runs on i.mx1 */
 	IMX21_GPIO,	/* runs on i.mx21 and i.mx27 */
@@ -337,6 +339,15 @@ static void __devinit mxc_gpio_get_hw(struct platform_device *pdev)
 	mxc_gpio_hwtype = hwtype;
 }
 
+static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
+{
+	struct bgpio_chip *bgc = to_bgpio_chip(gc);
+	struct mxc_gpio_port *port =
+		container_of(bgc, struct mxc_gpio_port, bgc);
+
+	return port->virtual_irq_start + offset;
+}
+
 static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
@@ -403,6 +414,7 @@ static int __devinit mxc_gpio_probe(struct platform_device *pdev)
 	if (err)
 		goto out_iounmap;
 
+	port->bgc.gc.to_irq = mxc_gpio_to_irq;
 	port->bgc.gc.base = pdev->id * 32;
 	port->bgc.dir = port->bgc.read_reg(port->bgc.reg_dir);
 	port->bgc.data = port->bgc.read_reg(port->bgc.reg_set);

drivers/gpio/gpio-mxs.c

@@ -49,6 +49,8 @@
 #define GPIO_INT_LEV_MASK	(1 << 0)
 #define GPIO_INT_POL_MASK	(1 << 1)
 
+#define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
+
 struct mxs_gpio_port {
 	void __iomem *base;
 	int id;