Commit 0487fff7 authored by Stanley Chu's avatar Stanley Chu Committed by Martin K. Petersen

scsi: ufs: Fix regulator load and icc-level configuration

Currently if a regulator has "<name>-fixed-regulator" property in device
tree, it will skip current limit initialization.  This lead to a zero
"max_uA" value in struct ufs_vreg.

However, "regulator_set_load" operation shall be required on regulators
which have valid current limits, otherwise a zero "max_uA" set by
"regulator_set_load" may cause unexpected behavior when this regulator is
enabled or set as high power mode.

Similarly, in device's icc_level configuration flow, the target icc_level
shall be updated if regulator also has valid current limit, otherwise a
wrong icc_level will be calculated by zero "max_uA" and thus causes
unexpected results after it is written to device.
Signed-off-by: default avatarStanley Chu <stanley.chu@mediatek.com>
Reviewed-by: default avatarAvri Altman <avri.altman@wdc.com>
Acked-by: default avatarAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
parent 3b141e8c
...@@ -6294,19 +6294,19 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba, ...@@ -6294,19 +6294,19 @@ static u32 ufshcd_find_max_sup_active_icc_level(struct ufs_hba *hba,
goto out; goto out;
} }
if (hba->vreg_info.vcc) if (hba->vreg_info.vcc && hba->vreg_info.vcc->max_uA)
icc_level = ufshcd_get_max_icc_level( icc_level = ufshcd_get_max_icc_level(
hba->vreg_info.vcc->max_uA, hba->vreg_info.vcc->max_uA,
POWER_DESC_MAX_ACTV_ICC_LVLS - 1, POWER_DESC_MAX_ACTV_ICC_LVLS - 1,
&desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]); &desc_buf[PWR_DESC_ACTIVE_LVLS_VCC_0]);
if (hba->vreg_info.vccq) if (hba->vreg_info.vccq && hba->vreg_info.vccq->max_uA)
icc_level = ufshcd_get_max_icc_level( icc_level = ufshcd_get_max_icc_level(
hba->vreg_info.vccq->max_uA, hba->vreg_info.vccq->max_uA,
icc_level, icc_level,
&desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]); &desc_buf[PWR_DESC_ACTIVE_LVLS_VCCQ_0]);
if (hba->vreg_info.vccq2) if (hba->vreg_info.vccq2 && hba->vreg_info.vccq2->max_uA)
icc_level = ufshcd_get_max_icc_level( icc_level = ufshcd_get_max_icc_level(
hba->vreg_info.vccq2->max_uA, hba->vreg_info.vccq2->max_uA,
icc_level, icc_level,
...@@ -7004,6 +7004,15 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg, ...@@ -7004,6 +7004,15 @@ static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
if (!vreg) if (!vreg)
return 0; return 0;
/*
* "set_load" operation shall be required on those regulators
* which specifically configured current limitation. Otherwise
* zero max_uA may cause unexpected behavior when regulator is
* enabled or set as high power mode.
*/
if (!vreg->max_uA)
return 0;
ret = regulator_set_load(vreg->reg, ua); ret = regulator_set_load(vreg->reg, ua);
if (ret < 0) { if (ret < 0) {
dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n", dev_err(dev, "%s: %s set load (ua=%d) failed, err=%d\n",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment