[media] m88ts2022: do not use dynamic stack allocation

I2C transfer were using dynamic stack allocation. Get rid of it.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>

drivers/media/tuners/m88ts2022.c

@@ -26,17 +26,22 @@
 static int m88ts2022_wr_regs(struct m88ts2022_priv *priv,
 		u8 reg, const u8 *val, int len)
 {
+#define MAX_WR_LEN 3
+#define MAX_WR_XFER_LEN (MAX_WR_LEN + 1)
 	int ret;
-	u8 buf[1 + len];
+	u8 buf[MAX_WR_XFER_LEN];
 	struct i2c_msg msg[1] = {
 		{
 			.addr = priv->cfg->i2c_addr,
 			.flags = 0,
-			.len = sizeof(buf),
+			.len = 1 + len,
 			.buf = buf,
 		}
 	};
 
+	if (WARN_ON(len > MAX_WR_LEN))
+		return -EINVAL;
+
 	buf[0] = reg;
 	memcpy(&buf[1], val, len);
 
@@ -57,8 +62,10 @@ static int m88ts2022_wr_regs(struct m88ts2022_priv *priv,
 static int m88ts2022_rd_regs(struct m88ts2022_priv *priv, u8 reg,
 		u8 *val, int len)
 {
+#define MAX_RD_LEN 1
+#define MAX_RD_XFER_LEN (MAX_RD_LEN)
 	int ret;
-	u8 buf[len];
+	u8 buf[MAX_RD_XFER_LEN];
 	struct i2c_msg msg[2] = {
 		{
 			.addr = priv->cfg->i2c_addr,
@@ -68,11 +75,14 @@ static int m88ts2022_rd_regs(struct m88ts2022_priv *priv, u8 reg,
 		}, {
 			.addr = priv->cfg->i2c_addr,
 			.flags = I2C_M_RD,
-			.len = sizeof(buf),
+			.len = len,
 			.buf = buf,
 		}
 	};
 
+	if (WARN_ON(len > MAX_RD_LEN))
+		return -EINVAL;
+
 	ret = i2c_transfer(priv->i2c, msg, 2);
 	if (ret == 2) {
 		memcpy(val, buf, len);