Commit 05822c83 authored by Sascha Hauer's avatar Sascha Hauer

ARM i.MX entry-macro.S: remove now unused code

Signed-off-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
parent ffa2ea3f
......@@ -9,72 +9,16 @@
* published by the Free Software Foundation.
*/
#include <mach/hardware.h>
/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
#define AVIC_NIMASK 0x04
@ this macro disables fast irq (not implemented)
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
#ifndef CONFIG_MXC_TZIC
ldr \base, =avic_base
ldr \base, [\base]
#ifdef CONFIG_MXC_IRQ_PRIOR
ldr r4, [\base, #AVIC_NIMASK]
#endif
#elif defined CONFIG_MXC_TZIC
ldr \base, =tzic_base
ldr \base, [\base]
#endif /* CONFIG_MXC_TZIC */
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
@ this macro checks which interrupt occurred
@ and returns its number in irqnr
@ and returns if an interrupt occurred in irqstat
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
#ifndef CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending from AVIC_NIVECSR
ldr \irqstat, [\base, #0x40]
@ Shift to get the decoded IRQ number, using ASR so
@ 'no interrupt pending' becomes 0xffffffff
mov \irqnr, \irqstat, asr #16
@ set zero flag if IRQ + 1 == 0
adds \tmp, \irqnr, #1
#ifdef CONFIG_MXC_IRQ_PRIOR
bicne \tmp, \irqstat, #0xFFFFFFE0
strne \tmp, [\base, #AVIC_NIMASK]
streq r4, [\base, #AVIC_NIMASK]
#endif
#elif defined CONFIG_MXC_TZIC
@ Load offset & priority of the highest priority
@ interrupt pending.
@ 0x080 is INTSEC0 register
@ 0xD80 is HIPND0 register
mov \irqnr, #0
1000: add \irqstat, \base, \irqnr, lsr #3
ldr \tmp, [\irqstat, #0xd80]
ldr \irqstat, [\irqstat, #0x080]
ands \tmp, \tmp, \irqstat
bne 1001f
add \irqnr, \irqnr, #32
cmp \irqnr, #128
blo 1000b
b 2001f
1001: mov \irqstat, #1
1002: tst \tmp, \irqstat
bne 2002f
movs \tmp, \tmp, lsr #1
addne \irqnr, \irqnr, #1
bne 1002b
2001:
mov \irqnr, #0
2002:
movs \irqnr, \irqnr
#endif
.endm
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment