rapidio: modify initialization of switch operations

Modify the way how RapidIO switch operations are declared.  Multiple
assignments through the linker script replaced by single initialization
call.
Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/rapidio/rio-scan.c

@@ -246,24 +246,24 @@ static int rio_is_switch(struct rio_dev *rdev)
 }
 
 /**
- * rio_route_set_ops- Sets routing operations for a particular vendor switch
+ * rio_switch_init - Sets switch operations for a particular vendor switch
  * @rdev: RIO device
+ * @do_enum: Enumeration/Discovery mode flag
  *
- * Searches the RIO route ops table for known switch types. If the vid
- * and did match a switch table entry, then set the add_entry() and
- * get_entry() ops to the table entry values.
+ * Searches the RIO switch ops table for known switch types. If the vid
+ * and did match a switch table entry, then call switch initialization
+ * routine to setup switch-specific routines.
  */
-static void rio_route_set_ops(struct rio_dev *rdev)
+static void rio_switch_init(struct rio_dev *rdev, int do_enum)
 {
-	struct rio_route_ops *cur = __start_rio_route_ops;
-	struct rio_route_ops *end = __end_rio_route_ops;
+	struct rio_switch_ops *cur = __start_rio_switch_ops;
+	struct rio_switch_ops *end = __end_rio_switch_ops;
 
 	while (cur < end) {
 		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
-			pr_debug("RIO: adding routing ops for %s\n", rio_name(rdev));
-			rdev->rswitch->add_entry = cur->add_hook;
-			rdev->rswitch->get_entry = cur->get_hook;
-			rdev->rswitch->clr_table = cur->clr_hook;
+			pr_debug("RIO: calling init routine for %s\n",
+				 rio_name(rdev));
+			cur->init_hook(rdev, do_enum);
 			break;
 		}
 		cur++;
@@ -282,30 +282,6 @@ static void rio_route_set_ops(struct rio_dev *rdev)
 		       rio_name(rdev));
 }
 
-/**
- * rio_em_set_ops- Sets Error Managment operations for a particular vendor switch
- * @rdev: RIO device
- *
- * Searches the RIO EM ops table for known switch types. If the vid
- * and did match a switch table entry, then set the em_init() and
- * em_handle() ops to the table entry values.
- */
-static void rio_em_set_ops(struct rio_dev *rdev)
-{
-	struct rio_em_ops *cur = __start_rio_em_ops;
-	struct rio_em_ops *end = __end_rio_em_ops;
-
-	while (cur < end) {
-		if ((cur->vid == rdev->vid) && (cur->did == rdev->did)) {
-			pr_debug("RIO: adding EM ops for %s\n", rio_name(rdev));
-			rdev->rswitch->em_init = cur->init_hook;
-			rdev->rswitch->em_handle = cur->handler_hook;
-			break;
-		}
-		cur++;
-	}
-}
-
 /**
  * rio_add_device- Adds a RIO device to the device model
  * @rdev: RIO device
@@ -484,8 +460,7 @@ static struct rio_dev __devinit *rio_setup_device(struct rio_net *net,
 		rdev->rswitch = rswitch;
 		dev_set_name(&rdev->dev, "%02x:s:%04x", rdev->net->id,
 			     rdev->rswitch->switchid);
-		rio_route_set_ops(rdev);
-		rio_em_set_ops(rdev);
+		rio_switch_init(rdev, do_enum);
 
 		if (do_enum && rdev->rswitch->clr_table)
 			rdev->rswitch->clr_table(port, destid, hopcount,

drivers/rapidio/rio.h

@@ -39,55 +39,29 @@ extern int rio_set_port_lockout(struct rio_dev *rdev, u32 pnum, int lock);
 extern struct device_attribute rio_dev_attrs[];
 extern spinlock_t rio_global_list_lock;
 
-extern struct rio_route_ops __start_rio_route_ops[];
-extern struct rio_route_ops __end_rio_route_ops[];
+extern struct rio_switch_ops __start_rio_switch_ops[];
+extern struct rio_switch_ops __end_rio_switch_ops[];
 
 /* Helpers internal to the RIO core code */
-#define DECLARE_RIO_ROUTE_SECTION(section, name, vid, did, add_hook, get_hook, clr_hook) \
-	static const struct rio_route_ops __rio_route_##name __used \
-	__section(section) = { vid, did, add_hook, get_hook, clr_hook };
+#define DECLARE_RIO_SWITCH_SECTION(section, name, vid, did, init_hook) \
+	static const struct rio_switch_ops __rio_switch_##name __used \
+	__section(section) = { vid, did, init_hook };
 
 /**
- * DECLARE_RIO_ROUTE_OPS - Registers switch routing operations
+ * DECLARE_RIO_SWITCH_INIT - Registers switch initialization routine
  * @vid: RIO vendor ID
  * @did: RIO device ID
- * @add_hook: Callback that adds a route entry
- * @get_hook: Callback that gets a route entry
+ * @init_hook: Callback that performs switch-specific initialization
  *
- * Manipulating switch route tables in RIO is switch specific. This
- * registers a switch by vendor and device ID with two callbacks for
- * modifying and retrieving route entries in a switch. A &struct
- * rio_route_ops is initialized with the ops and placed into a
- * RIO-specific kernel section.
+ * Manipulating switch route tables and error management in RIO
+ * is switch specific. This registers a switch by vendor and device ID with
+ * initialization callback for setting up switch operations and (if required)
+ * hardware initialization. A &struct rio_switch_ops is initialized with
+ * pointer to the init routine and placed into a RIO-specific kernel section.
  */
-#define DECLARE_RIO_ROUTE_OPS(vid, did, add_hook, get_hook, clr_hook)	\
-	DECLARE_RIO_ROUTE_SECTION(.rio_route_ops, vid##did,		\
-			vid, did, add_hook, get_hook, clr_hook)
+#define DECLARE_RIO_SWITCH_INIT(vid, did, init_hook)		\
+	DECLARE_RIO_SWITCH_SECTION(.rio_switch_ops, vid##did, \
+			vid, did, init_hook)
 
 #define RIO_GET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x00ff0000) >> 16))
 #define RIO_SET_DID(size, x)	(size ? (x & 0xffff) : ((x & 0x000000ff) << 16))
-
-/*
- *   RapidIO Error Management
- */
-extern struct rio_em_ops __start_rio_em_ops[];
-extern struct rio_em_ops __end_rio_em_ops[];
-
-/* Helpers internal to the RIO core code */
-#define DECLARE_RIO_EM_SECTION(section, name, vid, did, init_hook, em_hook)  \
-	static const struct rio_em_ops __rio_em_##name __used   \
-	__section(section) = { vid, did, init_hook, em_hook };
-
-/**
- * DECLARE_RIO_EM_OPS - Registers switch EM operations
- * @vid: RIO vendor ID
- * @did: RIO device ID
- * @init_hook: Callback that initializes device specific EM
- * @em_hook: Callback that handles device specific EM
- *
- * A &struct rio_em_ops is initialized with the ops and placed into a
- * RIO-specific kernel section.
- */
-#define DECLARE_RIO_EM_OPS(vid, did, init_hook, em_hook)	\
-	DECLARE_RIO_EM_SECTION(.rio_em_ops, vid##did,		\
-			vid, did, init_hook, em_hook)

drivers/rapidio/switches/idtcps.c

 /*
  * IDT CPS RapidIO switches support
  *
- * Copyright 2009 Integrated Device Technology, Inc.
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -81,9 +82,21 @@ idtcps_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
 	return 0;
 }
 
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_route_add_entry, idtcps_route_get_entry, idtcps_route_clr_table);
+static int idtcps_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = idtcps_route_add_entry;
+	rdev->rswitch->get_entry = idtcps_route_get_entry;
+	rdev->rswitch->clr_table = idtcps_route_clr_table;
+	rdev->rswitch->em_init = NULL;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS6Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS8, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS10Q, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS12, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDTCPS16, idtcps_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_IDT, RIO_DID_IDT70K200, idtcps_switch_init);

drivers/rapidio/switches/tsi500.c

 /*
  * RapidIO Tsi500 switch support
  *
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Modified switch operations initialization.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -57,4 +61,16 @@ tsi500_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, u16 tab
 	return ret;
 }
 
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_route_add_entry, tsi500_route_get_entry, NULL);
+static int tsi500_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi500_route_add_entry;
+	rdev->rswitch->get_entry = tsi500_route_get_entry;
+	rdev->rswitch->clr_table = NULL;
+	rdev->rswitch->em_init = NULL;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI500, tsi500_switch_init);

drivers/rapidio/switches/tsi568.c

@@ -2,6 +2,10 @@
  * RapidIO Tsi568 switch support
  *
  * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -106,8 +110,6 @@ tsi568_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
 	return 0;
 }
 
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_route_add_entry, tsi568_route_get_entry, tsi568_route_clr_table);
-
 static int
 tsi568_em_init(struct rio_dev *rdev)
 {
@@ -127,4 +129,16 @@ tsi568_em_init(struct rio_dev *rdev)
 	return 0;
 }
 
-DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_em_init, NULL);
+static int tsi568_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi568_route_add_entry;
+	rdev->rswitch->get_entry = tsi568_route_get_entry;
+	rdev->rswitch->clr_table = tsi568_route_clr_table;
+	rdev->rswitch->em_init = tsi568_em_init;
+	rdev->rswitch->em_handle = NULL;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI568, tsi568_switch_init);

drivers/rapidio/switches/tsi57x.c

 /*
  * RapidIO Tsi57x switch family support
  *
- * Copyright 2009 Integrated Device Technology, Inc.
+ * Copyright 2009-2010 Integrated Device Technology, Inc.
+ * Alexandre Bounine <alexandre.bounine@idt.com>
+ *  - Added EM support
+ *  - Modified switch operations initialization.
+ *
  * Copyright 2005 MontaVista Software, Inc.
  * Matt Porter <mporter@kernel.crashing.org>
  *
@@ -108,11 +112,6 @@ tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount,
 	return 0;
 }
 
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
-DECLARE_RIO_ROUTE_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_route_add_entry, tsi57x_route_get_entry, tsi57x_route_clr_table);
-
 static int
 tsi57x_em_init(struct rio_dev *rdev)
 {
@@ -253,7 +252,19 @@ tsi57x_em_handler(struct rio_dev *rdev, u8 portnum)
 	return 0;
 }
 
-DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_em_init, tsi57x_em_handler);
-DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_em_init, tsi57x_em_handler);
-DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_em_init, tsi57x_em_handler);
-DECLARE_RIO_EM_OPS(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_em_init, tsi57x_em_handler);
+static int tsi57x_switch_init(struct rio_dev *rdev, int do_enum)
+{
+	pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev));
+	rdev->rswitch->add_entry = tsi57x_route_add_entry;
+	rdev->rswitch->get_entry = tsi57x_route_get_entry;
+	rdev->rswitch->clr_table = tsi57x_route_clr_table;
+	rdev->rswitch->em_init = tsi57x_em_init;
+	rdev->rswitch->em_handle = tsi57x_em_handler;
+
+	return 0;
+}
+
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI572, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI574, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI577, tsi57x_switch_init);
+DECLARE_RIO_SWITCH_INIT(RIO_VID_TUNDRA, RIO_DID_TSI578, tsi57x_switch_init);

include/asm-generic/vmlinux.lds.h

@@ -248,12 +248,9 @@
 									\
 	/* RapidIO route ops */						\
 	.rio_ops        : AT(ADDR(.rio_ops) - LOAD_OFFSET) {		\
-		VMLINUX_SYMBOL(__start_rio_route_ops) = .;		\
-		*(.rio_route_ops)					\
-		VMLINUX_SYMBOL(__end_rio_route_ops) = .;		\
-		VMLINUX_SYMBOL(__start_rio_em_ops) = .;			\
-		*(.rio_em_ops)						\
-		VMLINUX_SYMBOL(__end_rio_em_ops) = .;			\
+		VMLINUX_SYMBOL(__start_rio_switch_ops) = .;		\
+		*(.rio_switch_ops)					\
+		VMLINUX_SYMBOL(__end_rio_switch_ops) = .;		\
 	}								\
 									\
 	TRACEDATA							\

include/linux/rio.h

@@ -320,40 +320,17 @@ struct rio_device_id {
 };
 
 /**
- * struct rio_route_ops - Per-switch route operations
+ * struct rio_switch_ops - Per-switch operations
  * @vid: RIO vendor ID
  * @did: RIO device ID
- * @add_hook: Callback that adds a route entry
- * @get_hook: Callback that gets a route entry
- * @clr_hook: Callback that clears a switch route table (may be NULL)
+ * @init_hook: Callback that performs switch device initialization
  *
- * Defines the operations that are necessary to manipulate the route
- * tables for a particular RIO switch device.
+ * Defines the operations that are necessary to initialize/control
+ * a particular RIO switch device.
  */
-struct rio_route_ops {
+struct rio_switch_ops {
 	u16 vid, did;
-	int (*add_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
-			 u16 table, u16 route_destid, u8 route_port);
-	int (*get_hook) (struct rio_mport * mport, u16 destid, u8 hopcount,
-			 u16 table, u16 route_destid, u8 * route_port);
-	int (*clr_hook) (struct rio_mport *mport, u16 destid, u8 hopcount,
-			 u16 table);
-};
-
-/**
- * struct rio_em_ops - Per-switch error management operations
- * @vid: RIO vendor ID
- * @did: RIO device ID
- * @init_hook: Switch specific error management initialization (may be NULL)
- * @handler_hook: Switch specific error management handler (may be NULL)
- *
- * Defines the operations that are necessary to initialize and handle
- * error management events for a particular RIO switch device.
- */
-struct rio_em_ops {
-	u16 vid, did;
-	int (*init_hook) (struct rio_dev *dev);
-	int (*handler_hook) (struct rio_dev *dev, u8 swport);
+	int (*init_hook) (struct rio_dev *rdev, int do_enum);
 };
 
 union rio_pw_msg {