Commit 05b1159e authored by Radim Krčmář's avatar Radim Krčmář

Merge tag 'kvms390-20160420' of...

Merge tag 'kvms390-20160420' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into next

KVM/s390 patches for 4.7:
- improve perf output
- cleanup and a new feature in the floating interrupt controller (FLIC)
parents 5e1b59ab 6d28f789
...@@ -11,6 +11,7 @@ FLIC provides support to ...@@ -11,6 +11,7 @@ FLIC provides support to
- add interrupts (KVM_DEV_FLIC_ENQUEUE) - add interrupts (KVM_DEV_FLIC_ENQUEUE)
- inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS) - inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS)
- purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS) - purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS)
- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
- enable/disable for the guest transparent async page faults - enable/disable for the guest transparent async page faults
- register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*) - register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
...@@ -40,6 +41,11 @@ Groups: ...@@ -40,6 +41,11 @@ Groups:
Simply deletes all elements from the list of currently pending floating Simply deletes all elements from the list of currently pending floating
interrupts. No interrupts are injected into the guest. interrupts. No interrupts are injected into the guest.
KVM_DEV_FLIC_CLEAR_IO_IRQ
Deletes one (if any) I/O interrupt for a subchannel identified by the
subsystem identification word passed via the buffer specified by
attr->addr (address) and attr->attr (length).
KVM_DEV_FLIC_APF_ENABLE KVM_DEV_FLIC_APF_ENABLE
Enables async page faults for the guest. So in case of a major page fault Enables async page faults for the guest. So in case of a major page fault
the host is allowed to handle this async and continues the guest. the host is allowed to handle this async and continues the guest.
...@@ -94,3 +100,9 @@ struct kvm_s390_io_adapter_req { ...@@ -94,3 +100,9 @@ struct kvm_s390_io_adapter_req {
KVM_S390_IO_ADAPTER_UNMAP KVM_S390_IO_ADAPTER_UNMAP
release a userspace page for the translated address specified in addr release a userspace page for the translated address specified in addr
from the list of mappings from the list of mappings
Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
FLIC with an unknown group or attribute gives the error code EINVAL (instead of
ENXIO, as specified in the API documentation). It is not possible to conclude
that a FLIC operation is unavailable based on the error code resulting from a
usage attempt.
...@@ -25,6 +25,7 @@ ...@@ -25,6 +25,7 @@
#define KVM_DEV_FLIC_APF_DISABLE_WAIT 5 #define KVM_DEV_FLIC_APF_DISABLE_WAIT 5
#define KVM_DEV_FLIC_ADAPTER_REGISTER 6 #define KVM_DEV_FLIC_ADAPTER_REGISTER 6
#define KVM_DEV_FLIC_ADAPTER_MODIFY 7 #define KVM_DEV_FLIC_ADAPTER_MODIFY 7
#define KVM_DEV_FLIC_CLEAR_IO_IRQ 8
/* /*
* We can have up to 4*64k pending subchannels + 8 adapter interrupts, * We can have up to 4*64k pending subchannels + 8 adapter interrupts,
* as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts. * as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
......
...@@ -16,14 +16,19 @@ ...@@ -16,14 +16,19 @@
{ 0x01, "SIGP sense" }, \ { 0x01, "SIGP sense" }, \
{ 0x02, "SIGP external call" }, \ { 0x02, "SIGP external call" }, \
{ 0x03, "SIGP emergency signal" }, \ { 0x03, "SIGP emergency signal" }, \
{ 0x04, "SIGP start" }, \
{ 0x05, "SIGP stop" }, \ { 0x05, "SIGP stop" }, \
{ 0x06, "SIGP restart" }, \ { 0x06, "SIGP restart" }, \
{ 0x09, "SIGP stop and store status" }, \ { 0x09, "SIGP stop and store status" }, \
{ 0x0b, "SIGP initial cpu reset" }, \ { 0x0b, "SIGP initial cpu reset" }, \
{ 0x0c, "SIGP cpu reset" }, \
{ 0x0d, "SIGP set prefix" }, \ { 0x0d, "SIGP set prefix" }, \
{ 0x0e, "SIGP store status at address" }, \ { 0x0e, "SIGP store status at address" }, \
{ 0x12, "SIGP set architecture" }, \ { 0x12, "SIGP set architecture" }, \
{ 0x15, "SIGP sense running" } { 0x13, "SIGP conditional emergency signal" }, \
{ 0x15, "SIGP sense running" }, \
{ 0x16, "SIGP set multithreading"}, \
{ 0x17, "SIGP store additional status ait address"}
#define icpt_prog_codes \ #define icpt_prog_codes \
{ 0x0001, "Prog Operation" }, \ { 0x0001, "Prog Operation" }, \
......
...@@ -2034,6 +2034,27 @@ static int modify_io_adapter(struct kvm_device *dev, ...@@ -2034,6 +2034,27 @@ static int modify_io_adapter(struct kvm_device *dev,
return ret; return ret;
} }
static int clear_io_irq(struct kvm *kvm, struct kvm_device_attr *attr)
{
const u64 isc_mask = 0xffUL << 24; /* all iscs set */
u32 schid;
if (attr->flags)
return -EINVAL;
if (attr->attr != sizeof(schid))
return -EINVAL;
if (copy_from_user(&schid, (void __user *) attr->addr, sizeof(schid)))
return -EFAULT;
kfree(kvm_s390_get_io_int(kvm, isc_mask, schid));
/*
* If userspace is conforming to the architecture, we can have at most
* one pending I/O interrupt per subchannel, so this is effectively a
* clear all.
*/
return 0;
}
static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr) static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
{ {
int r = 0; int r = 0;
...@@ -2067,6 +2088,9 @@ static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr) ...@@ -2067,6 +2088,9 @@ static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
case KVM_DEV_FLIC_ADAPTER_MODIFY: case KVM_DEV_FLIC_ADAPTER_MODIFY:
r = modify_io_adapter(dev, attr); r = modify_io_adapter(dev, attr);
break; break;
case KVM_DEV_FLIC_CLEAR_IO_IRQ:
r = clear_io_irq(dev->kvm, attr);
break;
default: default:
r = -EINVAL; r = -EINVAL;
} }
...@@ -2074,6 +2098,23 @@ static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr) ...@@ -2074,6 +2098,23 @@ static int flic_set_attr(struct kvm_device *dev, struct kvm_device_attr *attr)
return r; return r;
} }
static int flic_has_attr(struct kvm_device *dev,
struct kvm_device_attr *attr)
{
switch (attr->group) {
case KVM_DEV_FLIC_GET_ALL_IRQS:
case KVM_DEV_FLIC_ENQUEUE:
case KVM_DEV_FLIC_CLEAR_IRQS:
case KVM_DEV_FLIC_APF_ENABLE:
case KVM_DEV_FLIC_APF_DISABLE_WAIT:
case KVM_DEV_FLIC_ADAPTER_REGISTER:
case KVM_DEV_FLIC_ADAPTER_MODIFY:
case KVM_DEV_FLIC_CLEAR_IO_IRQ:
return 0;
}
return -ENXIO;
}
static int flic_create(struct kvm_device *dev, u32 type) static int flic_create(struct kvm_device *dev, u32 type)
{ {
if (!dev) if (!dev)
...@@ -2095,6 +2136,7 @@ struct kvm_device_ops kvm_flic_ops = { ...@@ -2095,6 +2136,7 @@ struct kvm_device_ops kvm_flic_ops = {
.name = "kvm-flic", .name = "kvm-flic",
.get_attr = flic_get_attr, .get_attr = flic_get_attr,
.set_attr = flic_set_attr, .set_attr = flic_set_attr,
.has_attr = flic_has_attr,
.create = flic_create, .create = flic_create,
.destroy = flic_destroy, .destroy = flic_destroy,
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment