Merge branch 'for-russell' of...

Merge branch 'for-russell' of git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6 into devel

arch/arm/include/asm/sizes.h

@@ -43,6 +43,7 @@
 #define SZ_8M                           0x00800000
 #define SZ_16M                          0x01000000
 #define SZ_32M                          0x02000000
+#define SZ_48M                          0x03000000
 #define SZ_64M                          0x04000000
 #define SZ_128M                         0x08000000
 #define SZ_256M                         0x10000000

arch/arm/mach-ixp4xx/common-pci.c

@@ -366,7 +366,7 @@ void __init ixp4xx_adjust_zones(int node, unsigned long *zone_size,
 }
 
 void __init ixp4xx_pci_preinit(void)
-{  
+{
 	unsigned long cpuid = read_cpuid_id();
 
 	/*
@@ -386,17 +386,17 @@ void __init ixp4xx_pci_preinit(void)
 
 	pr_debug("setup PCI-AHB(inbound) and AHB-PCI(outbound) address mappings\n");
 
-	/* 
+	/*
 	 * We use identity AHB->PCI address translation
 	 * in the 0x48000000 to 0x4bffffff address space
 	 */
 	*PCI_PCIMEMBASE = 0x48494A4B;
 
-	/* 
+	/*
 	 * We also use identity PCI->AHB address translation
 	 * in 4 16MB BARs that begin at the physical memory start
 	 */
-	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) + 
+	*PCI_AHBMEMBASE = (PHYS_OFFSET & 0xFF000000) +
 		((PHYS_OFFSET & 0xFF000000) >> 8) +
 		((PHYS_OFFSET & 0xFF000000) >> 16) +
 		((PHYS_OFFSET & 0xFF000000) >> 24) +
@@ -408,18 +408,19 @@ void __init ixp4xx_pci_preinit(void)
 		pr_debug("setup BARs in controller\n");
 
 		/*
-		 * We configure the PCI inbound memory windows to be 
+		 * We configure the PCI inbound memory windows to be
 		 * 1:1 mapped to SDRAM
 		 */
-		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET + 0x00000000);
-		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + 0x01000000);
-		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + 0x02000000);
-		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + 0x03000000);
+		local_write_config(PCI_BASE_ADDRESS_0, 4, PHYS_OFFSET);
+		local_write_config(PCI_BASE_ADDRESS_1, 4, PHYS_OFFSET + SZ_16M);
+		local_write_config(PCI_BASE_ADDRESS_2, 4, PHYS_OFFSET + SZ_32M);
+		local_write_config(PCI_BASE_ADDRESS_3, 4, PHYS_OFFSET + SZ_48M);
 
 		/*
-		 * Enable CSR window at 0xff000000.
+		 * Enable CSR window at 64 MiB to allow PCI masters
+		 * to continue prefetching past 64 MiB boundary.
 		 */
-		local_write_config(PCI_BASE_ADDRESS_4, 4, 0xff000008);
+		local_write_config(PCI_BASE_ADDRESS_4, 4, PHYS_OFFSET + SZ_64M);
 
 		/*
 		 * Enable the IO window to be way up high, at 0xfffffc00
@@ -500,7 +501,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 	return 1;
 }
 
-struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __devinit ixp4xx_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &ixp4xx_ops, sys);
 }

arch/arm/mach-ixp4xx/include/mach/cpu.h

@@ -17,26 +17,31 @@
 #include <asm/cputype.h>
 
 /* Processor id value in CP15 Register 0 */
-#define IXP425_PROCESSOR_ID_VALUE	0x690541c0
-#define IXP435_PROCESSOR_ID_VALUE	0x69054040
-#define IXP465_PROCESSOR_ID_VALUE	0x69054200
-#define IXP4XX_PROCESSOR_ID_MASK	0xfffffff0
-
-#define cpu_is_ixp42x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP425_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp43x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP435_PROCESSOR_ID_VALUE)
-#define cpu_is_ixp46x()	((read_cpuid_id() & IXP4XX_PROCESSOR_ID_MASK) == \
-			  IXP465_PROCESSOR_ID_VALUE)
+#define IXP42X_PROCESSOR_ID_VALUE	0x690541c0 /* including unused 0x690541Ex */
+#define IXP42X_PROCESSOR_ID_MASK	0xffffffc0
+
+#define IXP43X_PROCESSOR_ID_VALUE	0x69054040
+#define IXP43X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define IXP46X_PROCESSOR_ID_VALUE	0x69054200 /* including IXP455 */
+#define IXP46X_PROCESSOR_ID_MASK	0xfffffff0
+
+#define cpu_is_ixp42x()	((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
+			 IXP42X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp43x()	((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
+			 IXP43X_PROCESSOR_ID_VALUE)
+#define cpu_is_ixp46x()	((read_cpuid_id() & IXP46X_PROCESSOR_ID_MASK) == \
+			 IXP46X_PROCESSOR_ID_VALUE)
 
 static inline u32 ixp4xx_read_feature_bits(void)
 {
 	unsigned int val = ~*IXP4XX_EXP_CFG2;
-	val &= ~IXP4XX_FEATURE_RESERVED;
-	if (!cpu_is_ixp46x())
-		val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
 
-	return val;
+	if (cpu_is_ixp42x())
+		return val & IXP42X_FEATURE_MASK;
+	if (cpu_is_ixp43x())
+		return val & IXP43X_FEATURE_MASK;
+	return val & IXP46X_FEATURE_MASK;
 }
 
 static inline void ixp4xx_write_feature_bits(u32 value)

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -604,6 +604,7 @@
 #define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
 
 /* "fuse" bits of IXP_EXP_CFG2 */
+/* All IXP4xx CPUs */
 #define IXP4XX_FEATURE_RCOMP		(1 << 0)
 #define IXP4XX_FEATURE_USB_DEVICE	(1 << 1)
 #define IXP4XX_FEATURE_HASH		(1 << 2)
@@ -619,20 +620,41 @@
 #define IXP4XX_FEATURE_RESET_NPEB	(1 << 12)
 #define IXP4XX_FEATURE_RESET_NPEC	(1 << 13)
 #define IXP4XX_FEATURE_PCI		(1 << 14)
-#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT	(3 << 16)
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
+#define IXP42X_FEATURE_MASK		(IXP4XX_FEATURE_RCOMP            | \
+					 IXP4XX_FEATURE_USB_DEVICE       | \
+					 IXP4XX_FEATURE_HASH             | \
+					 IXP4XX_FEATURE_AES              | \
+					 IXP4XX_FEATURE_DES              | \
+					 IXP4XX_FEATURE_HDLC             | \
+					 IXP4XX_FEATURE_AAL              | \
+					 IXP4XX_FEATURE_HSS              | \
+					 IXP4XX_FEATURE_UTOPIA           | \
+					 IXP4XX_FEATURE_NPEB_ETH0        | \
+					 IXP4XX_FEATURE_NPEC_ETH         | \
+					 IXP4XX_FEATURE_RESET_NPEA       | \
+					 IXP4XX_FEATURE_RESET_NPEB       | \
+					 IXP4XX_FEATURE_RESET_NPEC       | \
+					 IXP4XX_FEATURE_PCI              | \
+					 IXP4XX_FEATURE_UTOPIA_PHY_LIMIT | \
+					 IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+
+
+/* IXP43x/46x CPUs */
+#define IXP4XX_FEATURE_ECC_TIMESYNC	(1 << 15)
 #define IXP4XX_FEATURE_USB_HOST		(1 << 18)
 #define IXP4XX_FEATURE_NPEA_ETH		(1 << 19)
+#define IXP43X_FEATURE_MASK		(IXP42X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_ECC_TIMESYNC     | \
+					 IXP4XX_FEATURE_USB_HOST         | \
+					 IXP4XX_FEATURE_NPEA_ETH)
+
+/* IXP46x CPU (including IXP455) only */
 #define IXP4XX_FEATURE_NPEB_ETH_1_TO_3	(1 << 20)
 #define IXP4XX_FEATURE_RSA		(1 << 21)
-#define IXP4XX_FEATURE_XSCALE_MAX_FREQ	(3 << 22)
-#define IXP4XX_FEATURE_RESERVED		(0xFF << 24)
-
-#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC |	\
-				    IXP4XX_FEATURE_USB_HOST |		\
-				    IXP4XX_FEATURE_NPEA_ETH |		\
-				    IXP4XX_FEATURE_NPEB_ETH_1_TO_3 |	\
-				    IXP4XX_FEATURE_RSA |		\
-				    IXP4XX_FEATURE_XSCALE_MAX_FREQ)
+#define IXP46X_FEATURE_MASK		(IXP43X_FEATURE_MASK             | \
+					 IXP4XX_FEATURE_NPEB_ETH_1_TO_3  | \
+					 IXP4XX_FEATURE_RSA)
 
 #endif

arch/arm/mach-ixp4xx/ixp4xx_npe.c

@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		for (i = 0; i < image->size; i++)
 			image->data[i] = swab32(image->data[i]);
 
-	if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
-		print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
+	if (cpu_is_ixp42x() && ((image->id >> 28) & 0xF /* device ID */)) {
+		print_npe(KERN_INFO, npe, "IXP43x/IXP46x firmware ignored on "
 			  "IXP42x\n");
 		goto err;
 	}
@@ -596,7 +596,7 @@ int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
 		  "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
 		  (image->id >> 8) & 0xFF, image->id & 0xFF);
 
-	if (!cpu_is_ixp46x()) {
+	if (cpu_is_ixp42x()) {
 		if (!npe->id)
 			instr_size = NPE_A_42X_INSTR_SIZE;
 		else

drivers/net/arm/ixp4xx_eth.c

@@ -335,11 +335,20 @@ static int ixp4xx_mdio_register(void)
 	if (!(mdio_bus = mdiobus_alloc()))
 		return -ENOMEM;
 
-	/* All MII PHY accesses use NPE-B Ethernet registers */
-	spin_lock_init(&mdio_lock);
-	mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
-	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+	if (cpu_is_ixp43x()) {
+		/* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
+		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
+			return -ENOSYS;
+		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
+	} else {
+		/* All MII PHY accesses use NPE-B Ethernet registers */
+		if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
+			return -ENOSYS;
+		mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
+	}
 
+	__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
+	spin_lock_init(&mdio_lock);
 	mdio_bus->name = "IXP4xx MII Bus";
 	mdio_bus->read = &ixp4xx_mdio_read;
 	mdio_bus->write = &ixp4xx_mdio_write;
@@ -1250,9 +1259,6 @@ static struct platform_driver ixp4xx_eth_driver = {
 static int __init eth_init_module(void)
 {
 	int err;
-	if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
-		return -ENOSYS;
-
 	if ((err = ixp4xx_mdio_register()))
 		return err;
 	return platform_driver_register(&ixp4xx_eth_driver);