ASoC: qcom: apq8016-sbc: add support to routing via DT

This patch adds support to allow audio routing via Device Tree.
This is mostly used to specify MICBIAS and other power supplies
relation.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

Documentation/devicetree/bindings/sound/qcom,apq8016-sbc.txt

@@ -16,6 +16,24 @@ Required properties:
 				* "spkr-iomux"
 - qcom,model		: Name of the sound card.
 
+- qcom,audio-routing	: A list of the connections between audio components.
+			  Each entry is a pair of strings, the first being the
+			  connection's sink, the second being the connection's
+			  source. Valid names could be power supplies, MicBias
+			  of msm8x16_wcd codec and the jacks on the board:
+
+			  Power supplies:
+			  * MIC BIAS External1
+			  * MIC BIAS External2
+			  * MIC BIAS Internal1
+			  * MIC BIAS Internal2
+
+			  Board connectors:
+			  * Headset Mic
+			  * Secondary Mic",
+			  * DMIC
+			  * Ext Spk
+
 Dai-link subnode properties and subnodes:
 
 Required dai-link subnodes:
@@ -37,6 +55,18 @@ sound: sound {
 	reg-names = "mic-iomux", "spkr-iomux";
 	qcom,model = "DB410c";
 
+	qcom,audio-routing =
+		"MIC BIAS External1", "Handset Mic",
+		"MIC BIAS Internal2", "Headset Mic",
+		"MIC BIAS External1", "Secondary Mic",
+		"AMIC1", "MIC BIAS External1",
+		"AMIC2", "MIC BIAS Internal2",
+		"AMIC3", "MIC BIAS External1",
+		"DMIC1", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic1",
+		"DMIC2", "MIC BIAS Internal1",
+		"MIC BIAS Internal1", "Digital Mic2";
+
 	/* I2S - Internal codec */
 	internal-dai-link@0 {
 		cpu { /* PRIMARY */

sound/soc/qcom/apq8016_sbc.c

@@ -85,6 +85,15 @@ static struct apq8016_sbc_data *apq8016_sbc_parse_of(struct snd_soc_card *card)
 		return ERR_PTR(ret);
 	}
 
+	/* DAPM routes */
+	if (of_property_read_bool(node, "qcom,audio-routing")) {
+		ret = snd_soc_of_parse_audio_routing(card,
+					"qcom,audio-routing");
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+
 	/* Populate links */
 	num_links = of_get_child_count(node);