usb: mtu3: add new helpers for host suspend/resume

Extract two helpers for host suspend and resume, will make it easy
to support dual-role mode suspend/resume later.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1626340078-29111-10-git-send-email-chunfeng.yun@mediatek.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/mtu3/mtu3_dr.h

@@ -16,8 +16,8 @@ int ssusb_host_init(struct ssusb_mtk *ssusb, struct device_node *parent_dn);
 void ssusb_host_exit(struct ssusb_mtk *ssusb);
 int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
 				struct device_node *dn);
-int ssusb_host_enable(struct ssusb_mtk *ssusb);
-int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend);
+int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped);
+int ssusb_host_suspend(struct ssusb_mtk *ssusb);
 void ssusb_wakeup_set(struct ssusb_mtk *ssusb, bool enable);
 
 #else
@@ -38,12 +38,12 @@ static inline int ssusb_wakeup_of_property_parse(
 	return 0;
 }
 
-static inline int ssusb_host_enable(struct ssusb_mtk *ssusb)
+static inline int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped)
 {
 	return 0;
 }
 
-static inline int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
+static inline int ssusb_host_suspend(struct ssusb_mtk *ssusb)
 {
 	return 0;
 }

drivers/usb/mtu3/mtu3_host.c

@@ -126,7 +126,7 @@ static void host_ports_num_get(struct ssusb_mtk *ssusb)
 }
 
 /* only configure ports will be used later */
-int ssusb_host_enable(struct ssusb_mtk *ssusb)
+static int ssusb_host_enable(struct ssusb_mtk *ssusb)
 {
 	void __iomem *ibase = ssusb->ippc_base;
 	int num_u3p = ssusb->u3_ports;
@@ -171,13 +171,12 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
 	return ssusb_check_clocks(ssusb, check_clk);
 }
 
-int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
+static int ssusb_host_disable(struct ssusb_mtk *ssusb)
 {
 	void __iomem *ibase = ssusb->ippc_base;
 	int num_u3p = ssusb->u3_ports;
 	int num_u2p = ssusb->u2_ports;
 	u32 value;
-	int ret;
 	int i;
 
 	/* power down and disable u3 ports except skipped ones */
@@ -186,8 +185,7 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 			continue;
 
 		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
-		value |= SSUSB_U3_PORT_PDN;
-		value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
+		value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
 		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
 	}
 
@@ -197,16 +195,90 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
 			continue;
 
 		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
-		value |= SSUSB_U2_PORT_PDN;
-		value |= suspend ? 0 : SSUSB_U2_PORT_DIS;
+		value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
 		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
 	}
 
 	/* power down host ip */
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
 
-	if (!suspend)
-		return 0;
+	return 0;
+}
+
+int ssusb_host_resume(struct ssusb_mtk *ssusb, bool p0_skipped)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int u3p_skip_msk = ssusb->u3p_dis_msk;
+	int u2p_skip_msk = ssusb->u2p_dis_msk;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	u32 value;
+	int i;
+
+	if (p0_skipped) {
+		u2p_skip_msk |= 0x1;
+		if (ssusb->otg_switch.is_u3_drd)
+			u3p_skip_msk |= 0x1;
+	}
+
+	/* power on host ip */
+	mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
+
+	/* power on u3 ports except skipped ones */
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & u3p_skip_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value &= ~SSUSB_U3_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power on all u2 ports except skipped ones */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & u2p_skip_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value &= ~SSUSB_U2_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	return 0;
+}
+
+/* here not skip port0 due to PDN can be set repeatedly */
+int ssusb_host_suspend(struct ssusb_mtk *ssusb)
+{
+	void __iomem *ibase = ssusb->ippc_base;
+	int num_u3p = ssusb->u3_ports;
+	int num_u2p = ssusb->u2_ports;
+	u32 value;
+	int ret;
+	int i;
+
+	/* power down u3 ports except skipped ones */
+	for (i = 0; i < num_u3p; i++) {
+		if ((0x1 << i) & ssusb->u3p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
+		value |= SSUSB_U3_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U3_CTRL(i), value);
+	}
+
+	/* power down u2 ports except skipped ones */
+	for (i = 0; i < num_u2p; i++) {
+		if ((0x1 << i) & ssusb->u2p_dis_msk)
+			continue;
+
+		value = mtu3_readl(ibase, SSUSB_U2_CTRL(i));
+		value |= SSUSB_U2_PORT_PDN;
+		mtu3_writel(ibase, SSUSB_U2_CTRL(i), value);
+	}
+
+	/* power down host ip */
+	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
 
 	/* wait for host ip to sleep */
 	ret = readl_poll_timeout(ibase + U3D_SSUSB_IP_PW_STS1, value,
@@ -237,7 +309,7 @@ static void ssusb_host_cleanup(struct ssusb_mtk *ssusb)
 	if (ssusb->is_host)
 		ssusb_set_vbus(&ssusb->otg_switch, 0);
 
-	ssusb_host_disable(ssusb, false);
+	ssusb_host_disable(ssusb);
 }
 
 /*

drivers/usb/mtu3/mtu3_plat.c

@@ -411,7 +411,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev)
 	if (!ssusb->is_host)
 		return 0;
 
-	ssusb_host_disable(ssusb, true);
+	ssusb_host_suspend(ssusb);
 	ssusb_phy_power_off(ssusb);
 	clk_bulk_disable_unprepare(BULK_CLKS_CNT, ssusb->clks);
 	ssusb_wakeup_set(ssusb, true);
@@ -438,7 +438,7 @@ static int __maybe_unused mtu3_resume(struct device *dev)
 	if (ret)
 		goto phy_err;
 
-	ssusb_host_enable(ssusb);
+	ssusb_host_resume(ssusb, false);
 
 	return 0;