ASoC: ateml: Use dev_err_probe() helper

Use the dev_err_probe() helper, instead of open-coding the same
operation.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20211214020843.2225831-12-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

sound/soc/atmel/mikroe-proto.c

@@ -144,9 +144,9 @@ static int snd_proto_probe(struct platform_device *pdev)
 	of_node_put(cpu_np);
 
 	ret = snd_soc_register_card(&snd_proto);
-	if (ret && ret != -EPROBE_DEFER)
-		dev_err(&pdev->dev,
-			"snd_soc_register_card() failed: %d\n", ret);
+	if (ret)
+		dev_err_probe(&pdev->dev, ret,
+			"snd_soc_register_card() failed\n");
 
 	return ret;
 }

sound/soc/atmel/tse850-pcm5142.c

@@ -371,35 +371,27 @@ static int tse850_probe(struct platform_device *pdev)
 	}
 
 	tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH);
-	if (IS_ERR(tse850->add)) {
-		if (PTR_ERR(tse850->add) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'add' gpio\n");
-		return PTR_ERR(tse850->add);
-	}
+	if (IS_ERR(tse850->add))
+		return dev_err_probe(dev, PTR_ERR(tse850->add),
+				     "failed to get 'add' gpio\n");
 	tse850->add_cache = 1;
 
 	tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH);
-	if (IS_ERR(tse850->loop1)) {
-		if (PTR_ERR(tse850->loop1) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'loop1' gpio\n");
-		return PTR_ERR(tse850->loop1);
-	}
+	if (IS_ERR(tse850->loop1))
+		return dev_err_probe(dev, PTR_ERR(tse850->loop1),
+				     "failed to get 'loop1' gpio\n");
 	tse850->loop1_cache = 1;
 
 	tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH);
-	if (IS_ERR(tse850->loop2)) {
-		if (PTR_ERR(tse850->loop2) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'loop2' gpio\n");
-		return PTR_ERR(tse850->loop2);
-	}
+	if (IS_ERR(tse850->loop2))
+		return dev_err_probe(dev, PTR_ERR(tse850->loop2),
+				     "failed to get 'loop2' gpio\n");
 	tse850->loop2_cache = 1;
 
 	tse850->ana = devm_regulator_get(dev, "axentia,ana");
-	if (IS_ERR(tse850->ana)) {
-		if (PTR_ERR(tse850->ana) != -EPROBE_DEFER)
-			dev_err(dev, "failed to get 'ana' regulator\n");
-		return PTR_ERR(tse850->ana);
-	}
+	if (IS_ERR(tse850->ana))
+		return dev_err_probe(dev, PTR_ERR(tse850->ana),
+				     "failed to get 'ana' regulator\n");
 
 	ret = regulator_enable(tse850->ana);
 	if (ret < 0) {