Commit 06bab589 authored by Paul Hsieh's avatar Paul Hsieh Committed by Alex Deucher

drm/amd/display: Power down hardware if timer not trigger

[WHY]
In headless systems, if SetMode/Power down timer
is not called, hardware will not be powered down
causing HW/SW discrepancies. Powering down hardware
on SetPowerState to D3 will ensure SW/HW state is accurate.

[HOW]
If PowerDownThread timer is not trigger but OS call
SetPowerState to D3, power down hardware.
Reviewed-by: default avatarEric Yang <Eric.Yang2@amd.com>
Acked-by: default avatarAlex Hung <alex.hung@amd.com>
Signed-off-by: default avatarPaul Hsieh <paul.hsieh@amd.com>
Tested-by: default avatarDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 83bb5032
...@@ -615,13 +615,37 @@ static void dcn31_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk ...@@ -615,13 +615,37 @@ static void dcn31_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk
} }
} }
void dcn31_set_low_power_state(struct clk_mgr *clk_mgr_base)
{
int display_count;
struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base);
struct dc *dc = clk_mgr_base->ctx->dc;
struct dc_state *context = dc->current_state;
if (clk_mgr_base->clks.pwr_state != DCN_PWR_STATE_LOW_POWER) {
display_count = dcn31_get_active_display_cnt_wa(dc, context);
/* if we can go lower, go lower */
if (display_count == 0) {
union display_idle_optimization_u idle_info = { 0 };
idle_info.idle_info.df_request_disabled = 1;
idle_info.idle_info.phy_ref_clk_off = 1;
idle_info.idle_info.s0i2_rdy = 1;
dcn31_smu_set_display_idle_optimization(clk_mgr, idle_info.data);
/* update power state */
clk_mgr_base->clks.pwr_state = DCN_PWR_STATE_LOW_POWER;
}
}
}
static struct clk_mgr_funcs dcn31_funcs = { static struct clk_mgr_funcs dcn31_funcs = {
.get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz, .get_dp_ref_clk_frequency = dce12_get_dp_ref_freq_khz,
.update_clocks = dcn31_update_clocks, .update_clocks = dcn31_update_clocks,
.init_clocks = dcn31_init_clocks, .init_clocks = dcn31_init_clocks,
.enable_pme_wa = dcn31_enable_pme_wa, .enable_pme_wa = dcn31_enable_pme_wa,
.are_clock_states_equal = dcn31_are_clock_states_equal, .are_clock_states_equal = dcn31_are_clock_states_equal,
.notify_wm_ranges = dcn31_notify_wm_ranges .notify_wm_ranges = dcn31_notify_wm_ranges,
.set_low_power_state = dcn31_set_low_power_state
}; };
extern struct clk_mgr_funcs dcn3_fpga_funcs; extern struct clk_mgr_funcs dcn3_fpga_funcs;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment