Commit 06c4998b authored by Axel Lin's avatar Axel Lin Committed by Mark Brown

regulator: tps65090: Use generic regmap enable/disable operations

This patch converts tps65090 regulator driver to use generic regmap
enable/disable operations.

Also move struct tps65090 to include/linux/mfd/tps65090.h because
the regulator driver needs to access the rmap field of struct tps65090.
Signed-off-by: default avatarAxel Lin <axel.lin@gmail.com>
Acked-by: default avatarVenu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent ee7b1914
......@@ -78,17 +78,6 @@ static struct mfd_cell tps65090s[] = {
},
};
struct tps65090 {
struct mutex lock;
struct device *dev;
struct i2c_client *client;
struct regmap *rmap;
struct irq_chip irq_chip;
struct mutex irq_lock;
int irq_base;
unsigned int id;
};
int tps65090_write(struct device *dev, int reg, uint8_t val)
{
struct tps65090 *tps = dev_get_drvdata(dev);
......
......@@ -29,10 +29,6 @@
struct tps65090_regulator {
int id;
/* Regulator register address.*/
u8 reg_en_reg;
u8 en_bit;
/* used by regulator core */
struct regulator_desc desc;
......@@ -40,64 +36,14 @@ struct tps65090_regulator {
struct device *dev;
};
static inline struct device *to_tps65090_dev(struct regulator_dev *rdev)
{
return rdev_get_dev(rdev)->parent->parent;
}
static int tps65090_reg_is_enabled(struct regulator_dev *rdev)
{
struct tps65090_regulator *ri = rdev_get_drvdata(rdev);
struct device *parent = to_tps65090_dev(rdev);
uint8_t control;
int ret;
ret = tps65090_read(parent, ri->reg_en_reg, &control);
if (ret < 0) {
dev_err(&rdev->dev, "Error in reading reg 0x%x\n",
ri->reg_en_reg);
return ret;
}
return (((control >> ri->en_bit) & 1) == 1);
}
static int tps65090_reg_enable(struct regulator_dev *rdev)
{
struct tps65090_regulator *ri = rdev_get_drvdata(rdev);
struct device *parent = to_tps65090_dev(rdev);
int ret;
ret = tps65090_set_bits(parent, ri->reg_en_reg, ri->en_bit);
if (ret < 0)
dev_err(&rdev->dev, "Error in updating reg 0x%x\n",
ri->reg_en_reg);
return ret;
}
static int tps65090_reg_disable(struct regulator_dev *rdev)
{
struct tps65090_regulator *ri = rdev_get_drvdata(rdev);
struct device *parent = to_tps65090_dev(rdev);
int ret;
ret = tps65090_clr_bits(parent, ri->reg_en_reg, ri->en_bit);
if (ret < 0)
dev_err(&rdev->dev, "Error in updating reg 0x%x\n",
ri->reg_en_reg);
return ret;
}
static struct regulator_ops tps65090_ops = {
.enable = tps65090_reg_enable,
.disable = tps65090_reg_disable,
.is_enabled = tps65090_reg_is_enabled,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
};
#define tps65090_REG(_id) \
{ \
.reg_en_reg = (TPS65090_ID_##_id) + 12, \
.en_bit = 0, \
.id = TPS65090_ID_##_id, \
.desc = { \
.name = tps65090_rails(_id), \
......@@ -105,6 +51,8 @@ static struct regulator_ops tps65090_ops = {
.ops = &tps65090_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_reg = (TPS65090_ID_##_id) + 12, \
.enable_mask = BIT(0), \
}, \
}
......@@ -136,6 +84,7 @@ static inline struct tps65090_regulator *find_regulator_info(int id)
static int __devinit tps65090_regulator_probe(struct platform_device *pdev)
{
struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
struct tps65090_regulator *ri = NULL;
struct regulator_config config = { };
struct regulator_dev *rdev;
......@@ -155,6 +104,7 @@ static int __devinit tps65090_regulator_probe(struct platform_device *pdev)
config.dev = &pdev->dev;
config.init_data = &tps_pdata->regulator;
config.driver_data = ri;
config.regmap = tps65090_mfd->rmap;
rdev = regulator_register(&ri->desc, &config);
if (IS_ERR(rdev)) {
......
......@@ -22,6 +22,19 @@
#ifndef __LINUX_MFD_TPS65090_H
#define __LINUX_MFD_TPS65090_H
#include <linux/irq.h>
struct tps65090 {
struct mutex lock;
struct device *dev;
struct i2c_client *client;
struct regmap *rmap;
struct irq_chip irq_chip;
struct mutex irq_lock;
int irq_base;
unsigned int id;
};
struct tps65090_subdev_info {
int id;
const char *name;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment