Commit 073e3cf2 authored by Ben Hutchings's avatar Ben Hutchings Committed by David S. Miller

ethtool: Fix unwanted section breaks in kernel-doc

A colon almost unavoidably starts a new section.  The script should be
changed to provide a way to avoid this, but for now reword the
comments to avoid using colons.
Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ba569dc3
......@@ -351,17 +351,18 @@ struct ethtool_modinfo {
* @rate_sample_interval: How often to do adaptive coalescing packet rate
* sampling, measured in seconds. Must not be zero.
*
* Each pair of (usecs, max_frames) fields specifies this exit
* condition for interrupt coalescing:
* Each pair of (usecs, max_frames) fields specifies that interrupts
* should be coalesced until
* (usecs > 0 && time_since_first_completion >= usecs) ||
* (max_frames > 0 && completed_frames >= max_frames)
*
* It is illegal to set both usecs and max_frames to zero as this
* would cause interrupts to never be generated. To disable
* coalescing, set usecs = 0 and max_frames = 1.
*
* Some implementations ignore the value of max_frames and use the
* condition:
* time_since_first_completion >= usecs
* condition time_since_first_completion >= usecs
*
* This is deprecated. Drivers for hardware that does not support
* counting completions should validate that max_frames == !rx_usecs.
*
......@@ -809,7 +810,7 @@ struct ethtool_rx_flow_spec {
* %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
* location, and may remove a rule at a later location (lower
* priority) that matches exactly the same set of flows. The special
* values are: %RX_CLS_LOC_ANY, selecting any location;
* values are %RX_CLS_LOC_ANY, selecting any location;
* %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
* priority); and %RX_CLS_LOC_LAST, selecting the last suitable
* location (minimum priority). Additional special values may be
......@@ -949,8 +950,9 @@ struct ethtool_get_features_block {
/**
* struct ethtool_gfeatures - command to get state of device's features
* @cmd: command number = %ETHTOOL_GFEATURES
* @size: in: number of elements in the features[] array;
* out: number of elements in features[] needed to hold all features
* @size: On entry, the number of elements in the features[] array;
* on return, the number of elements in features[] needed to hold
* all features
* @features: state of features
*/
struct ethtool_gfeatures {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment