Skip to content

L
linux
Commit 07731019 authored by Marek Szyprowski's avatar Marek Szyprowski Committed by Linus Walleij
Browse files
Options

pinctrl: samsung: Move retention control from mach-exynos to the pinctrl driver 

This patch moves pad retention control from PMU driver to Exynos pin
controller driver. This helps to avoid possible ordering and logical
dependencies between machine, PMU and pin control code. Till now it
worked fine only because sys_ops for PMU and pin controller were called
in registration order.
This is also a preparation for adding new features to Exynos pin
controller driver, like runtime power management and suspending
individual pin controllers, which might be a part of some power domain.
Signed-off-by: default avatarMarek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Acked-by: default avatarTomasz Figa <tomasz.figa@gmail.com>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 545e3e7d
Hide whitespace changes
Inline Side-by-side
Showing with 145 additions and 64 deletions
arch/arm/mach-exynos/suspend.c
View file @ 07731019
......@@ -57,7 +57,6 @@ struct exynos_wkup_irq {
struct exynos_pm_data {
const struct exynos_wkup_irq *wkup_irq;
unsigned int wake_disable_mask;
unsigned int *release_ret_regs;
void (*pm_prepare)(void);
void (*pm_resume_prepare)(void);
......@@ -95,47 +94,6 @@ static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
{ /* sentinel */ },
};
static unsigned int exynos_release_ret_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
REG_TABLE_END,
};
static unsigned int exynos3250_release_ret_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
S5P_PAD_RET_MMC2_OPTION,
S5P_PAD_RET_SPI_OPTION,
REG_TABLE_END,
};
static unsigned int exynos5420_release_ret_regs[] = {
EXYNOS_PAD_RET_DRAM_OPTION,
EXYNOS_PAD_RET_MAUDIO_OPTION,
EXYNOS_PAD_RET_JTAG_OPTION,
EXYNOS5420_PAD_RET_GPIO_OPTION,
EXYNOS5420_PAD_RET_UART_OPTION,
EXYNOS5420_PAD_RET_MMCA_OPTION,
EXYNOS5420_PAD_RET_MMCB_OPTION,
EXYNOS5420_PAD_RET_MMCC_OPTION,
EXYNOS5420_PAD_RET_HSI_OPTION,
EXYNOS_PAD_RET_EBIA_OPTION,
EXYNOS_PAD_RET_EBIB_OPTION,
EXYNOS5420_PAD_RET_SPI_OPTION,
EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION,
REG_TABLE_END,
};
static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
{
const struct exynos_wkup_irq *wkup_irq;
......@@ -442,15 +400,6 @@ static int exynos5420_pm_suspend(void)
return 0;
}
static void exynos_pm_release_retention(void)
{
unsigned int i;
for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++)
pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR,
pm_data->release_ret_regs[i]);
}
static void exynos_pm_resume(void)
{
u32 cpuid = read_cpuid_part();
......@@ -458,9 +407,6 @@ static void exynos_pm_resume(void)
if (exynos_pm_central_resume())
goto early_wakeup;
/* For release retention */
exynos_pm_release_retention();
if (cpuid == ARM_CPU_PART_CORTEX_A9)
scu_enable(S5P_VA_SCU);
......@@ -482,9 +428,6 @@ static void exynos3250_pm_resume(void)
if (exynos_pm_central_resume())
goto early_wakeup;
/* For release retention */
exynos_pm_release_retention();
pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
if (call_firmware_op(resume) == -ENOSYS
......@@ -522,9 +465,6 @@ static void exynos5420_pm_resume(void)
if (exynos_pm_central_resume())
goto early_wakeup;
/* For release retention */
exynos_pm_release_retention();
pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
early_wakeup:
......@@ -637,7 +577,6 @@ static const struct platform_suspend_ops exynos_suspend_ops = {
static const struct exynos_pm_data exynos3250_pm_data = {
.wkup_irq = exynos3250_wkup_irq,
.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
.release_ret_regs = exynos3250_release_ret_regs,
.pm_suspend = exynos_pm_suspend,
.pm_resume = exynos3250_pm_resume,
.pm_prepare = exynos3250_pm_prepare,
......@@ -647,7 +586,6 @@ static const struct exynos_pm_data exynos3250_pm_data = {
static const struct exynos_pm_data exynos4_pm_data = {
.wkup_irq = exynos4_wkup_irq,
.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
.release_ret_regs = exynos_release_ret_regs,
.pm_suspend = exynos_pm_suspend,
.pm_resume = exynos_pm_resume,
.pm_prepare = exynos_pm_prepare,
......@@ -657,7 +595,6 @@ static const struct exynos_pm_data exynos4_pm_data = {
static const struct exynos_pm_data exynos5250_pm_data = {
.wkup_irq = exynos5250_wkup_irq,
.wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
.release_ret_regs = exynos_release_ret_regs,
.pm_suspend = exynos_pm_suspend,
.pm_resume = exynos_pm_resume,
.pm_prepare = exynos_pm_prepare,
......@@ -667,7 +604,6 @@ static const struct exynos_pm_data exynos5250_pm_data = {
static const struct exynos_pm_data exynos5420_pm_data = {
.wkup_irq = exynos5250_wkup_irq,
.wake_disable_mask = (0x7F << 7) | (0x1F << 1),
.release_ret_regs = exynos5420_release_ret_regs,
.pm_resume_prepare = exynos5420_prepare_pm_resume,
.pm_resume = exynos5420_pm_resume,
.pm_suspend = exynos5420_pm_suspend,
......
drivers/pinctrl/samsung/pinctrl-exynos.c
View file @ 07731019
......@@ -28,7 +28,10 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/soc/samsung/exynos-pmu.h>
#include <linux/soc/samsung/exynos-regs-pmu.h>
#include "pinctrl-samsung.h"
#include "pinctrl-exynos.h"
......@@ -679,6 +682,54 @@ const struct samsung_pin_ctrl s5pv210_pin_ctrl[] __initconst = {
},
};
/* Pad retention control code for accessing PMU regmap */
static atomic_t exynos_shared_retention_refcnt;
static void exynos_retention_enable(struct samsung_pinctrl_drv_data *drvdata)
{
if (drvdata->retention_ctrl->refcnt)
atomic_inc(drvdata->retention_ctrl->refcnt);
}
static void exynos_retention_disable(struct samsung_pinctrl_drv_data *drvdata)
{
struct samsung_retention_ctrl *ctrl = drvdata->retention_ctrl;
struct regmap *pmu_regs = ctrl->priv;
int i;
if (ctrl->refcnt && !atomic_dec_and_test(ctrl->refcnt))
return;
for (i = 0; i < ctrl->nr_regs; i++)
regmap_write(pmu_regs, ctrl->regs[i], ctrl->value);
}
static struct samsung_retention_ctrl *
exynos_retention_init(struct samsung_pinctrl_drv_data *drvdata,
const struct samsung_retention_data *data)
{
struct samsung_retention_ctrl *ctrl;
struct regmap *pmu_regs;
ctrl = devm_kzalloc(drvdata->dev, sizeof(*ctrl), GFP_KERNEL);
if (!ctrl)
return ERR_PTR(-ENOMEM);
pmu_regs = exynos_get_pmu_regmap();
if (IS_ERR(pmu_regs))
return ERR_CAST(pmu_regs);
ctrl->priv = pmu_regs;
ctrl->regs = data->regs;
ctrl->nr_regs = data->nr_regs;
ctrl->value = data->value;
ctrl->refcnt = data->refcnt;
ctrl->enable = exynos_retention_enable;
ctrl->disable = exynos_retention_disable;
return ctrl;
}
/* pin banks of exynos3250 pin-controller 0 */
static const struct samsung_pin_bank_data exynos3250_pin_banks0[] __initconst = {
EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
......@@ -710,6 +761,30 @@ static const struct samsung_pin_bank_data exynos3250_pin_banks1[] __initconst =
EXYNOS_PIN_BANK_EINTW(8, 0xc60, "gpx3", 0x0c),
};
/*
* PMU pad retention groups for Exynos3250 doesn't match pin banks, so handle
* them all together
*/
static const u32 exynos3250_retention_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
S5P_PAD_RET_MMC2_OPTION,
S5P_PAD_RET_SPI_OPTION,
};
static const struct samsung_retention_data exynos3250_retention_data __initconst = {
.regs = exynos3250_retention_regs,
.nr_regs = ARRAY_SIZE(exynos3250_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos3250 SoC. Exynos3250 SoC includes
* two gpio/pin-mux/pinconfig controllers.
......@@ -722,6 +797,7 @@ const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos3250_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos3250_pin_banks1,
......@@ -730,6 +806,7 @@ const struct samsung_pin_ctrl exynos3250_pin_ctrl[] __initconst = {
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos3250_retention_data,
},
};
......@@ -782,6 +859,36 @@ static const struct samsung_pin_bank_data exynos4210_pin_banks2[] __initconst =
EXYNOS_PIN_BANK_EINTN(7, 0x000, "gpz"),
};
/* PMU pad retention groups registers for Exynos4 (without audio) */
static const u32 exynos4_retention_regs[] = {
S5P_PAD_RET_GPIO_OPTION,
S5P_PAD_RET_UART_OPTION,
S5P_PAD_RET_MMCA_OPTION,
S5P_PAD_RET_MMCB_OPTION,
S5P_PAD_RET_EBIA_OPTION,
S5P_PAD_RET_EBIB_OPTION,
};
static const struct samsung_retention_data exynos4_retention_data __initconst = {
.regs = exynos4_retention_regs,
.nr_regs = ARRAY_SIZE(exynos4_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/* PMU retention control for audio pins can be tied to audio pin bank */
static const u32 exynos4_audio_retention_regs[] = {
S5P_PAD_RET_MAUDIO_OPTION,
};
static const struct samsung_retention_data exynos4_audio_retention_data __initconst = {
.regs = exynos4_audio_retention_regs,
.nr_regs = ARRAY_SIZE(exynos4_audio_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
* three gpio/pin-mux/pinconfig controllers.
......@@ -794,6 +901,7 @@ const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4210_pin_banks1,
......@@ -802,10 +910,12 @@ const struct samsung_pin_ctrl exynos4210_pin_ctrl[] __initconst = {
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4210_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
.retention_data = &exynos4_audio_retention_data,
},
};
......@@ -879,6 +989,7 @@ const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos4x12_pin_banks1,
......@@ -887,6 +998,7 @@ const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = {
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos4x12_pin_banks2,
......@@ -894,6 +1006,7 @@ const struct samsung_pin_ctrl exynos4x12_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_audio_retention_data,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos4x12_pin_banks3,
......@@ -973,6 +1086,7 @@ const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = {
.eint_wkup_init = exynos_eint_wkup_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5250_pin_banks1,
......@@ -980,6 +1094,7 @@ const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5250_pin_banks2,
......@@ -994,6 +1109,7 @@ const struct samsung_pin_ctrl exynos5250_pin_ctrl[] __initconst = {
.eint_gpio_init = exynos_eint_gpio_init,
.suspend = exynos_pinctrl_suspend,
.resume = exynos_pinctrl_resume,
.retention_data = &exynos4_audio_retention_data,
},
};
......@@ -1220,6 +1336,30 @@ static const struct samsung_pin_bank_data exynos5420_pin_banks4[] __initconst =
EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
};
/* PMU pad retention groups registers for Exynos5420 (without audio) */
static const u32 exynos5420_retention_regs[] = {
EXYNOS_PAD_RET_DRAM_OPTION,
EXYNOS_PAD_RET_JTAG_OPTION,
EXYNOS5420_PAD_RET_GPIO_OPTION,
EXYNOS5420_PAD_RET_UART_OPTION,
EXYNOS5420_PAD_RET_MMCA_OPTION,
EXYNOS5420_PAD_RET_MMCB_OPTION,
EXYNOS5420_PAD_RET_MMCC_OPTION,
EXYNOS5420_PAD_RET_HSI_OPTION,
EXYNOS_PAD_RET_EBIA_OPTION,
EXYNOS_PAD_RET_EBIB_OPTION,
EXYNOS5420_PAD_RET_SPI_OPTION,
EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION,
};
static const struct samsung_retention_data exynos5420_retention_data __initconst = {
.regs = exynos5420_retention_regs,
.nr_regs = ARRAY_SIZE(exynos5420_retention_regs),
.value = EXYNOS_WAKEUP_FROM_LOWPWR,
.refcnt = &exynos_shared_retention_refcnt,
.init = exynos_retention_init,
};
/*
* Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes
* four gpio/pin-mux/pinconfig controllers.
......@@ -1231,26 +1371,31 @@ const struct samsung_pin_ctrl exynos5420_pin_ctrl[] __initconst = {
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks0),
.eint_gpio_init = exynos_eint_gpio_init,
.eint_wkup_init = exynos_eint_wkup_init,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 1 data */
.pin_banks = exynos5420_pin_banks1,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks1),
.eint_gpio_init = exynos_eint_gpio_init,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 2 data */
.pin_banks = exynos5420_pin_banks2,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks2),
.eint_gpio_init = exynos_eint_gpio_init,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 3 data */
.pin_banks = exynos5420_pin_banks3,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks3),
.eint_gpio_init = exynos_eint_gpio_init,
.retention_data = &exynos5420_retention_data,
}, {
/* pin-controller instance 4 data */
.pin_banks = exynos5420_pin_banks4,
.nr_banks = ARRAY_SIZE(exynos5420_pin_banks4),
.eint_gpio_init = exynos_eint_gpio_init,
.retention_data = &exynos4_audio_retention_data,
},
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7