Commit 0795fb20 authored by Samuel Mendoza-Jonas's avatar Samuel Mendoza-Jonas Committed by David S. Miller

net/ncsi: Stop monitor if channel times out or is inactive

ncsi_channel_monitor() misses stopping the channel monitor in several
places that it should, causing a WARN_ON_ONCE() to trigger when the
monitor is re-started later, eg:

[  459.040000] WARNING: CPU: 0 PID: 1093 at net/ncsi/ncsi-manage.c:269 ncsi_start_channel_monitor+0x7c/0x90
[  459.040000] CPU: 0 PID: 1093 Comm: kworker/0:3 Not tainted 4.10.17-gaca2fdd #140
[  459.040000] Hardware name: ASpeed SoC
[  459.040000] Workqueue: events ncsi_dev_work
[  459.040000] [<80010094>] (unwind_backtrace) from [<8000d950>] (show_stack+0x20/0x24)
[  459.040000] [<8000d950>] (show_stack) from [<801dbf70>] (dump_stack+0x20/0x28)
[  459.040000] [<801dbf70>] (dump_stack) from [<80018d7c>] (__warn+0xe0/0x108)
[  459.040000] [<80018d7c>] (__warn) from [<80018e70>] (warn_slowpath_null+0x30/0x38)
[  459.040000] [<80018e70>] (warn_slowpath_null) from [<803f6a08>] (ncsi_start_channel_monitor+0x7c/0x90)
[  459.040000] [<803f6a08>] (ncsi_start_channel_monitor) from [<803f7664>] (ncsi_configure_channel+0xdc/0x5fc)
[  459.040000] [<803f7664>] (ncsi_configure_channel) from [<803f8160>] (ncsi_dev_work+0xac/0x474)
[  459.040000] [<803f8160>] (ncsi_dev_work) from [<8002d244>] (process_one_work+0x1e0/0x450)
[  459.040000] [<8002d244>] (process_one_work) from [<8002d510>] (worker_thread+0x5c/0x570)
[  459.040000] [<8002d510>] (worker_thread) from [<80033614>] (kthread+0x124/0x164)
[  459.040000] [<80033614>] (kthread) from [<8000a5e8>] (ret_from_fork+0x14/0x2c)

This also updates the monitor instead of just returning if
ncsi_xmit_cmd() fails to send the get-link-status command so that the
monitor properly times out.

Fixes: e6f44ed6 "net/ncsi: Package and channel management"
Signed-off-by: default avatarSamuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 6850d0f8
...@@ -202,11 +202,15 @@ static void ncsi_channel_monitor(unsigned long data) ...@@ -202,11 +202,15 @@ static void ncsi_channel_monitor(unsigned long data)
monitor_state = nc->monitor.state; monitor_state = nc->monitor.state;
spin_unlock_irqrestore(&nc->lock, flags); spin_unlock_irqrestore(&nc->lock, flags);
if (!enabled || chained) if (!enabled || chained) {
ncsi_stop_channel_monitor(nc);
return; return;
}
if (state != NCSI_CHANNEL_INACTIVE && if (state != NCSI_CHANNEL_INACTIVE &&
state != NCSI_CHANNEL_ACTIVE) state != NCSI_CHANNEL_ACTIVE) {
ncsi_stop_channel_monitor(nc);
return; return;
}
switch (monitor_state) { switch (monitor_state) {
case NCSI_CHANNEL_MONITOR_START: case NCSI_CHANNEL_MONITOR_START:
...@@ -217,12 +221,9 @@ static void ncsi_channel_monitor(unsigned long data) ...@@ -217,12 +221,9 @@ static void ncsi_channel_monitor(unsigned long data)
nca.type = NCSI_PKT_CMD_GLS; nca.type = NCSI_PKT_CMD_GLS;
nca.req_flags = 0; nca.req_flags = 0;
ret = ncsi_xmit_cmd(&nca); ret = ncsi_xmit_cmd(&nca);
if (ret) { if (ret)
netdev_err(ndp->ndev.dev, "Error %d sending GLS\n", netdev_err(ndp->ndev.dev, "Error %d sending GLS\n",
ret); ret);
return;
}
break; break;
case NCSI_CHANNEL_MONITOR_WAIT ... NCSI_CHANNEL_MONITOR_WAIT_MAX: case NCSI_CHANNEL_MONITOR_WAIT ... NCSI_CHANNEL_MONITOR_WAIT_MAX:
break; break;
...@@ -233,6 +234,8 @@ static void ncsi_channel_monitor(unsigned long data) ...@@ -233,6 +234,8 @@ static void ncsi_channel_monitor(unsigned long data)
ndp->flags |= NCSI_DEV_RESHUFFLE; ndp->flags |= NCSI_DEV_RESHUFFLE;
} }
ncsi_stop_channel_monitor(nc);
spin_lock_irqsave(&nc->lock, flags); spin_lock_irqsave(&nc->lock, flags);
nc->state = NCSI_CHANNEL_INVISIBLE; nc->state = NCSI_CHANNEL_INVISIBLE;
spin_unlock_irqrestore(&nc->lock, flags); spin_unlock_irqrestore(&nc->lock, flags);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment