Merge tag 'mac80211-for-davem-2015-09-04' of...

Merge tag 'mac80211-for-davem-2015-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
For the first round of fixes, we have this:
 * fix for the sizeof() pointer type issue
 * a fix for regulatory getting into a restore loop
 * a fix for rfkill global 'all' state, it needs to be stored
   everywhere to apply correctly to new rfkill instances
 * properly refuse CQM RSSI when it cannot actually be used
 * protect HT TDLS traffic properly in non-HT networks
 * don't incorrectly advertise 80 MHz support when not allowed
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

include/net/mac80211.h

@@ -477,7 +477,9 @@ struct ieee80211_event {
  * @chandef: Channel definition for this BSS -- the hardware might be
  *	configured a higher bandwidth than this BSS uses, for example.
  * @ht_operation_mode: HT operation mode like in &struct ieee80211_ht_operation.
- *	This field is only valid when the channel type is one of the HT types.
+ *	This field is only valid when the channel is a wide HT/VHT channel.
+ *	Note that with TDLS this can be the case (channel is HT, protection must
+ *	be used from this field) even when the BSS association isn't using HT.
  * @cqm_rssi_thold: Connection quality monitor RSSI threshold, a zero value
  *	implies disabled
  * @cqm_rssi_hyst: Connection quality monitor RSSI hysteresis

net/mac80211/cfg.c

@@ -2468,6 +2468,10 @@ static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
 	    rssi_hyst == bss_conf->cqm_rssi_hyst)
 		return 0;
 
+	if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER &&
+	    !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI))
+		return -EOPNOTSUPP;
+
 	bss_conf->cqm_rssi_thold = rssi_thold;
 	bss_conf->cqm_rssi_hyst = rssi_hyst;
 

net/mac80211/mlme.c

@@ -4267,6 +4267,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_supported_band *sband;
 	struct cfg80211_chan_def chandef;
 	int ret;
+	u32 i;
+	bool have_80mhz;
 
 	sband = local->hw.wiphy->bands[cbss->channel->band];
 
@@ -4317,6 +4319,20 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
 		}
 	}
 
+	/* Allow VHT if at least one channel on the sband supports 80 MHz */
+	have_80mhz = false;
+	for (i = 0; i < sband->n_channels; i++) {
+		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+						IEEE80211_CHAN_NO_80MHZ))
+			continue;
+
+		have_80mhz = true;
+		break;
+	}
+
+	if (!have_80mhz)
+		ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
+
 	ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
 						     cbss->channel,
 						     ht_cap, ht_oper, vht_oper,

net/mac80211/rate.c

@@ -716,7 +716,7 @@ static bool rate_control_cap_mask(struct ieee80211_sub_if_data *sdata,
 
 		/* Filter out rates that the STA does not support */
 		*mask &= sta->supp_rates[sband->band];
-		for (i = 0; i < sizeof(mcs_mask); i++)
+		for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
 			mcs_mask[i] &= sta->ht_cap.mcs.rx_mask[i];
 
 		sta_vht_cap = sta->vht_cap.vht_mcs.rx_mcs_map;

net/mac80211/tdls.c

@@ -1249,6 +1249,58 @@ static void iee80211_tdls_recalc_chanctx(struct ieee80211_sub_if_data *sdata)
 	mutex_unlock(&local->chanctx_mtx);
 }
 
+static int iee80211_tdls_have_ht_peers(struct ieee80211_sub_if_data *sdata)
+{
+	struct sta_info *sta;
+	bool result = false;
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) {
+		if (!sta->sta.tdls || sta->sdata != sdata || !sta->uploaded ||
+		    !test_sta_flag(sta, WLAN_STA_AUTHORIZED) ||
+		    !test_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH) ||
+		    !sta->sta.ht_cap.ht_supported)
+			continue;
+		result = true;
+		break;
+	}
+	rcu_read_unlock();
+
+	return result;
+}
+
+static void
+iee80211_tdls_recalc_ht_protection(struct ieee80211_sub_if_data *sdata,
+				   struct sta_info *sta)
+{
+	struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
+	bool tdls_ht;
+	u16 protection = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED |
+			 IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT |
+			 IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT;
+	u16 opmode;
+
+	/* Nothing to do if the BSS connection uses HT */
+	if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
+		return;
+
+	tdls_ht = (sta && sta->sta.ht_cap.ht_supported) ||
+		  iee80211_tdls_have_ht_peers(sdata);
+
+	opmode = sdata->vif.bss_conf.ht_operation_mode;
+
+	if (tdls_ht)
+		opmode |= protection;
+	else
+		opmode &= ~protection;
+
+	if (opmode == sdata->vif.bss_conf.ht_operation_mode)
+		return;
+
+	sdata->vif.bss_conf.ht_operation_mode = opmode;
+	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
+}
+
 int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 			const u8 *peer, enum nl80211_tdls_operation oper)
 {
@@ -1274,6 +1326,10 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 		return -ENOTSUPP;
 	}
 
+	/* protect possible bss_conf changes and avoid concurrency in
+	 * ieee80211_bss_info_change_notify()
+	 */
+	sdata_lock(sdata);
 	mutex_lock(&local->mtx);
 	tdls_dbg(sdata, "TDLS oper %d peer %pM\n", oper, peer);
 
@@ -1287,16 +1343,18 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 
 		iee80211_tdls_recalc_chanctx(sdata);
 
-		rcu_read_lock();
+		mutex_lock(&local->sta_mtx);
 		sta = sta_info_get(sdata, peer);
 		if (!sta) {
-			rcu_read_unlock();
+			mutex_unlock(&local->sta_mtx);
 			ret = -ENOLINK;
 			break;
 		}
 
+		iee80211_tdls_recalc_ht_protection(sdata, sta);
+
 		set_sta_flag(sta, WLAN_STA_TDLS_PEER_AUTH);
-		rcu_read_unlock();
+		mutex_unlock(&local->sta_mtx);
 
 		WARN_ON_ONCE(is_zero_ether_addr(sdata->u.mgd.tdls_peer) ||
 			     !ether_addr_equal(sdata->u.mgd.tdls_peer, peer));
@@ -1318,6 +1376,11 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 		ieee80211_flush_queues(local, sdata, false);
 
 		ret = sta_info_destroy_addr(sdata, peer);
+
+		mutex_lock(&local->sta_mtx);
+		iee80211_tdls_recalc_ht_protection(sdata, NULL);
+		mutex_unlock(&local->sta_mtx);
+
 		iee80211_tdls_recalc_chanctx(sdata);
 		break;
 	default:
@@ -1335,6 +1398,7 @@ int ieee80211_tdls_oper(struct wiphy *wiphy, struct net_device *dev,
 				     &sdata->u.mgd.request_smps_work);
 
 	mutex_unlock(&local->mtx);
+	sdata_unlock(sdata);
 	return ret;
 }
 

net/mac80211/vht.c

@@ -120,6 +120,7 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
 	struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap;
 	struct ieee80211_sta_vht_cap own_cap;
 	u32 cap_info, i;
+	bool have_80mhz;
 
 	memset(vht_cap, 0, sizeof(*vht_cap));
 
@@ -129,6 +130,20 @@ ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata,
 	if (!vht_cap_ie || !sband->vht_cap.vht_supported)
 		return;
 
+	/* Allow VHT if at least one channel on the sband supports 80 MHz */
+	have_80mhz = false;
+	for (i = 0; i < sband->n_channels; i++) {
+		if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
+						IEEE80211_CHAN_NO_80MHZ))
+			continue;
+
+		have_80mhz = true;
+		break;
+	}
+
+	if (!have_80mhz)
+		return;
+
 	/*
 	 * A VHT STA must support 40 MHz, but if we verify that here
 	 * then we break a few things - some APs (e.g. Netgear R6300v2

net/rfkill/core.c

@@ -341,7 +341,15 @@ static void __rfkill_switch_all(const enum rfkill_type type, bool blocked)
 {
 	struct rfkill *rfkill;
 
-	rfkill_global_states[type].cur = blocked;
+	if (type == RFKILL_TYPE_ALL) {
+		int i;
+
+		for (i = 0; i < NUM_RFKILL_TYPES; i++)
+			rfkill_global_states[i].cur = blocked;
+	} else {
+		rfkill_global_states[type].cur = blocked;
+	}
+
 	list_for_each_entry(rfkill, &rfkill_list, node) {
 		if (rfkill->type != type && type != RFKILL_TYPE_ALL)
 			continue;

net/wireless/reg.c

@@ -2625,7 +2625,7 @@ static void restore_regulatory_settings(bool reset_user)
 	 * settings, user regulatory settings takes precedence.
 	 */
 	if (is_an_alpha2(alpha2))
-		regulatory_hint_user(user_alpha2, NL80211_USER_REG_HINT_USER);
+		regulatory_hint_user(alpha2, NL80211_USER_REG_HINT_USER);
 
 	spin_lock(&reg_requests_lock);
 	list_splice_tail_init(&tmp_reg_req_list, &reg_requests_list);